Condition: like new (used), functionality: fully functional, power: 45 kW (61.18 HP), nominal power: 45 kW (61.18 HP), rotational speed (min.): 2,960 rpm, type of input current: AC, ATB Nordenham ATEX Rated 45kW Motor Gsdeyq Sf Sepfx Aciekb Type: CD 225M-2 New, unused, ex stores stock

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,900 kg, total length: 1,690 mm, total width: 1,260 mm, total height: 815 mm, gear ratio: 200, torque: 65,000 Nm, shaft diameter: 200 mm, 2 units of 4-stage industrial gearboxes used in winch applications. Manufacturer: Asug Penig, GDR Type: TGL 34611/10A8-450x200 Year of manufacture: 1987 Maximum torque: 65000 Nm Gear ratio: 200:1 Actual gear ratio: 200.364 Power: n1 950 rpm = 33 kW n1 710 rpm = 24.6 kW Dimensions: Shaft d1: Ø 45 mm x 110 mm Shaft d2: Ø 200 mm x 350 mm Shaft height h1: 400 mm Length: 1690 mm Width without shafts: 560 mm Width with 2x shafts: 1260 mm Height: 815 mm Weight without oil: 1900 kg (For design A8, the weight increases to approximately 2000 kg) Godpfx Acozw H Hieijkb Oil capacity: 68 kg The TGL 34611 series of gearboxes for conveyor systems and hoisting equipment includes three- and four-stage gearboxes with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing for a given size are the same for both the three- and four-stage versions. In the four-stage version, the drive shaft is located below the plane of the components. The housing is made of cast iron. The gearboxes can be operated in both directions of rotation.

Condition: new, Year of construction: 2019, functionality: fully functional, power: 250 kW (339.91 HP), rotational speed (min.): 992 rpm, input voltage: 380 V, input frequency: 50 Hz, overall weight: 1,759 kg, SIEMENS squirrel-cage induction motor: 1LE5603-3AC83-3GR3-Z_250kW, B02+B60+B61+H00+L51+Q01+Q02+Q72+R16+D47 Gkedjzm U N Depfx Acijb 6x PT100 sensors in the winding, PT100 sensor in each bearing, Anti-condensation heating 230 V/50 Hz, SPM nipples for vibration measurement, Insulated bearing on the non-drive end (NDE), Protective coating for C3 environment, EAC certificate. 250kW, inverter supply 380V (from a 400V grid), 50 Hz, 992 rpm, IMV1 with canopy, flange mounting with downward-facing shaft, IP 55, powered by a low-voltage converter, 490 A, 2407 Nm, self-ventilated IC 411, ambient temperature from -20 °C to +40 °C, altitude up to 1000 m above sea level, weight approx. 1,759 kg.

Condition: like new (used), functionality: fully functional, A total of 75 motors Brand - Type - Quantity Leroy Somer - LS63 - 1 Leroy Somer - LS71 - 1 FIR - 6AH3 - 5 Sabiana / FIR - 6AH12 - 1 Sabiana / FIR - 46SKAH5 - 1 Antriebstechnik G Bauknecht - 7543054/103 - 2 VEM motors - K21R71KZH - 1 Leroy Somer - LS112MT - 10 ABB - MT80A19F165-4 - 3 Dynamotor De Coster - ONV-T3 (2) - 3 Dynamotor De Coster - ONV-T6 (2) - 2 Dynamotor De Coster - ON-VT3 (2) - 1 Antriebstechnik G Bauknecht - RF0.25/2-7 - 1 Antriebstechnik G Bauknecht - RFO.25/2-7 - 1 Stork - 4AP90L-2 - 1 - N°004488-2000 - 2 Hanning Elektro-Werke - L7AF6B-143 - 1 Leroy Somer - LS132MW6 - 1 Leroy Somer - N°023871JG011 - 1 Efacec - BF5 112 M44 - 1 ABB - 3GAA131002-ASA - 1 ABB - MT100LBZ8-4/8 - 1 Afacec - BF5 112M44 - 1 - A9INCR0106AH3 - 1 RBL - RBLS17SE - 1 - OFR4745E - 7 AACO - 60.2.130M - 2 RBL - RBL6035E - 3 Gedpjyz Idmjfx Aciekb RBL - RBL4755E - 1 Dynamotor De Coster - OLPBC311 - 1 - RJB365 - 1 ABB - M2VA718-4 - 1 WEG - C56 - 1 VEM motors - K21R80K2 - 1 WEG - GF08143 - 1 Simel - 19/100 - 1 Leroy Somer - LS80LT - 1 AACO - 135.2.750.54T - 1 ATB - 112M/2A-11 - 3 - N°074751CL002 - 1 RBL - RBL 172 T - 1 ABB - 3GAA102001-ADA - 1 Simel - 10/3002 - 1 Simel - 10/3003 - 1

Condition: ready for operation (used), Year of construction: 2001, For sale is a complete set of equipment from two specialized production lines dating back to 2001 (machine park liquidation), designed for the production and final processing of electric motor stators. The machines are from reputable Italian manufacturers. The set includes two dedicated lines: 1. Line 63 (for stators with an outer diameter of ⌀90 mm / inner diameter of ⌀50 and ⌀47 mm): * Hydraulic press for the pre-forming of stator cores. * Core winding machine (stator core tying machine). * Final hydraulic press for forming the cores to their final dimensions (PiErre Galaxy A-100 with an Onda Impianti power unit). 2. Line 71 (for stators with an outer diameter of ⌀110 mm / inner diameter of ⌀55 mm): * Press for pre-forming. * Core winding machine (Mussino L.D.A.). * Final hydraulic press (PiErre Galaxy A-100). * Machine for joining the winding lead with the connection lead (Inarca Splice-Mat 1000). The lines also include: * Main machine, DMG MECCANICA s.r.l., model IM3E (year of manufacture 2005). * Set of winding wire unwinding and feeding units, Min Jen Precision Machinery, model MPI-0850FD, complete with additional tensioning equipment and plates. Gjdjzuuimspfx Aciokb The machines have complete safety guards, and the hydraulic power supply is provided by high-performance Oleodinamica power units from Onda Impianti. It is possible to adapt the tooling to other types of motors. The equipment is ready for loading. Please contact us.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a complete, modern production line for manufacturing and processing electric motor stators, produced by the reputable NIDE Group (year of manufacture: January 2017). The machines are fully automated (CNC/PLC control) and formed a cohesive production flow within the facility. The equipment has CE certification. The complete line consists of 5 processing stations: Gkjdpfjzuukqex Acijb Coil Winding Machine: Model RXL2-160. Winding Inserting Machine: Model QX1-150/160. Middle Forming Machine: Model Z2XJ1-160/190. Double Side Lacing Machine: Model BXIIL1-160/160 (with a rotary table integrated into the process). Final Forming Machine: Model Z3XJ1-200/210T (with its own hydraulic power unit). Along with a comprehensive set of tooling! We also sell the original toolboxes containing mandrels, forming heads, and dies, which enable quick changeovers for production (as seen in the photos). The line is ready for loading from the warehouse in Ostrzeszów. Please contact us.

Condition: used, Year of construction: 2018, functionality: fully functional, power: 500 kW (679.81 HP), nominal power: 500 kW (679.81 HP), rotational speed (min.): 1,490 rpm, input voltage: 500 V, input frequency: 50 Hz, input current: 692 A, type of input current: three-phase, overall weight: 2,500 kg, type of cooling: air, protection type (IP code): IP55, ABB AC Motor Construction: IM1001-B3 Standard: IEC60034-1 Temperature Class: F IP Rating: IP55 Gjdpfxjzt Sc Ie Aciskb Service Class: S1 Power Factor: 0.86 Frequency: 50 Hz

Condition: excellent (used), Large inventory of electric motors Total 4 rows (2 single racks and 1 double rack (as shown in the attached photos)) AC and DC motors Mainly 500V motors Reconditioned and new motors Gksdpfjyz R Egsx Aciob For sale as a single lot

Year of construction: 2026, condition: new, functionality: fully functional, Marine Generator set 6 cylinder 100 kva, 123A. made for keel cooling. with DEIF DSE7320 control box and shutdown on low water and oil pressure. 3x400v 50Hz. Brand new. 5 pcs. in stock and renovation kit available. Contact me for drawings with measurements off generator sets or more info. 4 Cylinder 75 kva, 108A also available! Gsdpfx Acszyckvjiekb

Condition: ready for operation (used), Year of construction: 2010, operating hours: 122,000 h, functionality: fully functional, power: 250 kW (339.91 HP), number of cylinders: 8, Used combined heat and power (CHP) unit, manufactured in 2010, for sale, complete with container. MAN gas engine overhauled in 2024 (proof of overhaul available in the form of an invoice). Gedpfx Acozkwc Ijiskb

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, overall weight: 1,100 kg, total length: 1,359 mm, total width: 500 mm, total height: 650 mm, gear ratio: 160, torque: 32,000 Nm, shaft diameter: 160 mm, 1 piece, very little used industrial spur gear reducer for conveyor systems, cranes, and lifting drives. This gear reducer was installed on a freight train cable shunting system. Gsdpfxszimqre Aciokb However, this shunting system was never used. The gear reducer was stored dry in a winch house. A PDF data sheet is available here under the advertisement description! Manufacturer: Penig / ASUG GDR Type: TGL 34611 / 10A2-355x160 Rated power: P = 21.4 kW Torque: 32000 Nm Gear ratio: i = 160 Actual gear ratio: 152.230 Speed n1: 950 rpm Speed n2: 6.24 rpm Input shaft diameter: 35mm x 80mm Output shaft: Solid shaft Ø 160mm x 300mm The second part of the pin coupling is also available. The bore in this half is 125 mm. !! The pin coupling is not included in the stated selling price !! Dimensions: Length: l4 = 1359 mm Width: b1 = 500 mm without shaft Height: h4 = 650 mm Shaft height: h1 = 315 mm Weight: 1100 kg The gear reducer series includes two-, three-, and four-stage gear reducers with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing of a particular design size are the same for two-, three-, and four-stage versions. In the four-stage version, the drive shaft is located below the parting plane. The housing is generally made of cast iron. The gear reducers can be operated in both directions of rotation.

Condition: used, Year of construction: 2018, operating hours: 13,000 h, functionality: fully functional, power: 45 kW (61.18 HP), nominal power: 45 kW (61.18 HP), rotational speed (min.): 1,480 rpm, rotational speed (max.): 1,776 rpm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, type of input current: three-phase, overall weight: 340 kg, total length: 840 mm, total width: 450 mm, total height: 565 mm, torque: 290 Nm, type of cooling: air, protection type (IP code): IP55, We are offering this used SEVA TEC SEV-225M electric motor, manufactured in 2018. Removed from service in mid-2024. Power: 45 kW Speed (50 Hz): 1,480 rpm Speed (60 Hz): 1,760 rpm Rated voltage (delta): 400 V Rated voltage (star): 690 V Gkjdpfx Aozw Aucecijb Rated current (delta): 66.7 A Rated current (star): 38.5 A Rated voltage (delta) 60 Hz: 460 V Rated voltage (star) 60 Hz: 796 V Rated current (delta) 60 Hz: 80.1 A Rated current (star) 60 Hz: 46.0 A Frequency: 50/60 Hz Power factor (cos φ): 0.88 Degree of protection: IP 55 Insulation class: F Operating mode: S1 PTC sensors: 3 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: SEH-80X, power: 2.79 kW (3.79 HP), fuel type: gasoline, number of cylinders: 1, cubic capacity: 133 cm³, nominal power: 4.04 kW (5.49 HP), rotational speed (min.): 1,400 rpm, rotational speed (max.): 3,900 rpm, overall weight: 33 kg, total length: 600 mm, total width: 600 mm, total height: 600 mm, torque: 10 Nm, type of cooling: air, The Koshin SEH-80X is a high-quality, professional 3-inch (80 mm) gasoline-powered water pump, driven by a reliable Honda GX160 four-stroke engine. This self-priming centrifugal pump is specifically designed for the rapid transfer of large volumes of clean to slightly contaminated water, making it widely used in construction, agriculture, shipping, and emergency drainage applications. Key specifications: • Capacity: Maximum 930 to 1,100 liters per minute (approx. 54 m³/hour free discharge). • Head: Maximum 26 to 30 meters. • Suction lift: Maximum 7 to 8 meters. • Engine: Air-cooled Honda GX160 (163 cc / approx. 3.9 to 5.5 HP). • Connection: 3" external thread (80 mm) for both inlet and outlet. Godpszw U Nlofx Acijkb • Solids passage: Suitable for solids up to a maximum of 3 mm. • Fuel tank capacity & runtime: 3.1 liters, providing approximately 2 hours and 10 minutes of continuous operation. • Weight & Dimensions: 30 kg with a compact size of 52.5 × 38.9 × 45.8 cm. Construction & Durability • Robust pump housing: Made of lightweight and exceptionally strong die-cast aluminum. • Cast iron internals: The impeller and impeller housing are made of cast iron for excellent wear resistance against abrasive particles (such as sludge). • Mechanical shaft seal: Features a high-quality carbon-ceramic seal that prevents leaks and significantly extends the service life. • Protective frame: The entire unit is mounted in a sturdy steel rollover frame with rubber vibration dampers to reduce mechanical stress. • Oil Alert: The engine automatically shuts off when the oil level drops too low to prevent engine damage. Performance at different heights The pump delivers less water as the head increases: • Free discharge: 54,000 liters per hour • At 5 meters: 49,500 liters per hour • At 10 meters: 42,000 liters per hour • At 20 meters: 27,000 liters per hour The SEH series uses the more expensive and high-quality Honda engine. Heavy-duty ballast pump for shipping, construction, etc. Type: SE Color: black Pump type: self-priming centrifugal pump Impeller type: open impeller Engine type: 4-stroke HONDA gasoline engine Shaft seal: mechanical seal of ceramic on carbon Impeller material: cast iron Impeller housing material: cast iron Pump housing material: aluminum Pump shaft material: stainless steel Liquids: slightly contaminated water At 10 meters: 42,000 liters per hour At 15 meters: 36,000 liters per hour At 20 meters: 27,000 liters per hour At 25 meters: 9,000 liters per hour Dimensions: lxbxh = 525 x 399 x 476 mm Weight: 34 kg Engine type: HONDA, GX160, 4-stroke engine, E5 gasoline Shaft power: 2.79 kW, 3.8 hp at 3600 rpm Shaft power: 4.04 kW, 5.5 hp at 4000 rpm Fuel tank capacity: 3.1 liters, approx. 2 hours and 10 minutes

Condition: used, 2 x DETROIT DIESEL – Diesel engine Name: 12V-71TI Marine Gear Model: 7122-7302 Engine numbers: 12VA81375 ZF gear type: IRM350PL.1 ZF gear numbers: 20008107 ----- Name: 12V-71TI Marine Gear Model: 7122-7302 Engine numbers: 12VA81377 ZF type: IRM350PL.1 ZF numbers: 20007942 ----- Engine power: 613.7 kW (835 HP) at 2300 rpm Year of manufacture: 1975 Description: Turbocharged-Intercooled Number of cylinders: 12 Bore and stroke: 4.25 in x 5 in (108 mm x 127 mm) Displacement: 852 cu in (13.97 liter) Compression ratio: 17 to 1 Net weight: 5200 lbs (2359 kg) ----- Westerbeke / Mecc Alte generator Westerbeke engine Model: 16.0 / 20.0 BEDA Spec: 50 / 60 HZ 3PH Serial No.: U20246-D904 Generator Brand: Mecc Alte Spa Type: W31-140/4 Kva: 20 Rpm: 1800 Phase: 1 Volt: 120 / 240 Amp: 166.6 / 83.3 Kg: 135 Date: 2000 Hours: 366 Price on request Godpfx Acexnbkqoiskb Delivery terms: Delivery time: ex stock, subject to prior sale Delivery: ex Baarle-Nassau Payment: prior to collection Prices: net, excl. VAT. Machinehandel De Leeuw bv Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands VAT / GST number: NL800103026B01 Chamber of Commerce Tilburg 18034279

Condition: like new (used), Engines total 52 units: Leroy ISS100LT5; 1 unit ABB M2VA50B-S; 1 unit De Coster ONVT6; 25 units Werhe Kaiser AED3/4C; 1 unit Gkodpsy Eghxefx Acieb D125; 1 unit LEROY LS11211; 1 unit BAUKNECHT 7587967/K01; 1 unit ABB M2AA160M2; 2 units ALLWEILER 1TZ90011CA134GB42; 2 units Leroy LS80LT; 2 units AACO; 1 unit RBL 473SE; 10 units Leroy LS90ST; 1 unit AEG 11190LY2; 1 unit HANNING L7A-6B-145; 1 unit LEROY LS714; 1 unit

Condition: used, Permanent Magnet Brushless Servo Motor SIEMENS with ALPHA Spur Gearbox Type: 1FT6064-1AF71-3EG1 Serial No.: YF P921 8717 07 001 Year of manufacture: 2002 Rated torque = MO: 7.9/9.5 Nm Rated current = Io: 5.0/6.1 A Max speed = n. max.: 4550 rpm ALPHA Angular Gearbox Type: PKF 160-MF2-18-031-000 Article code: 20026113 Gear ratio 18:1 (Gearbox input = 18 revolutions, gearbox output = 1 revolution) Hollow shaft outer diameter 68 mm Hollow shaft inner diameter 55 mm Shaft stub length 50 mm Centering diameter 140 mm Housing dimensions L/W/H 650 x 160 x 195 mm Weight: approx. 50 kg Gkedpfxexciw Uj Acieb Good condition Removed from a fully functional custom machine, tested prior to removal.

Condition: new, functionality: fully functional, power: 785 kW (1,067.30 HP), input voltage: 690 V, input frequency: 50 Hz, input current: 770 A, type of input current: three-phase, protection type (IP code): IP55, Siemens AC motor Type: 1LE55834BB347AK1-Z Gkodsxgt Ncepfx Acieb Construction: IM1001-B3 Standard: IEC60034-1 Input voltage: 690 V Input current: 770 A Power Pn KW: 785 kW RPM: 1492 Power factor: 0.88 Frequency: 50 Hz

Condition: new, Year of construction: 2019, functionality: fully functional, power: 1,250 kW (1,699.52 HP), input voltage: 690 V, input frequency: 50 Hz, type of input current: three-phase, protection type (IP code): IP55, Siemens AC Motor Type: 1LA4500-6CM00-Z Design: IM1001-B3 Standard: IEC60034-1 Insulation Class: F Godexal Drspfx Aciekb Protection Class: IP55 Duty Type: S1 Input Voltage: 690 V Input Current: 2 x 640 A Power (Pn): 1250 kW RPM: 995 Power Factor: 0.85 Frequency: 50 Hz

Condition: new, Year of construction: 2019, functionality: fully functional, power: 1,950 kW (2,651.26 HP), input voltage: 690 V, input frequency: 50 Hz, type of input current: three-phase, protection type (IP code): IP55, Siemens AC Motor Type: 1LA4562-6CM00-Z Godjxfbgmopfx Aciskb Construction: IM1001-B3 Standard: IEC60034-1 Insulation Class: F IP Rating: IP55 Duty Class: S1 Input Voltage: 690 V Input Current: 2 x 980 A Power Pn KW: 1950 kW RPM: 995 Power Factor: 0.86 Frequency: 50 Hz

Condition: refurbished (used), functionality: fully functional, power: 120 kW (163.15 HP), rotational speed (min.): 381 rpm, input voltage: 400 V, input current: 276 A, type of input current: DC, protection type (IP code): IP23, ABB DC motor Type: DMA355M39B Construction: IM1001-B3 Standard: IC 17 Gjdpfsxhdurox Aciekb Duty class: S1 Input voltage: 400 V Input current: 276 A Field voltage Ufield: 200 V Field current Ifield: 23 A Rated power Pn: 120 kW RPM: 381

Condition: refurbished (used), functionality: fully functional, power: 1,000 kW (1,359.62 HP), rotational speed (min.): 500 rpm, input voltage: 504 V, input current: 2,124 A, type of input current: DC, protection type (IP code): IP23, ABB DC motor Type: DMI400Z Construction: IM1001-B3 Gksdpfxexg Rbvj Aciob Standard: IEC 60034-1 Duty class: S1 Input voltage: 504 V Input current: 2124 A Field voltage Ufield: 330 V Field current Ifield: 36.2 A Power Pn KW: 1000 KW RPM: 500

Condition: refurbished (used), functionality: fully functional, power: 580 kW (788.58 HP), rotational speed (min.): 600 rpm, rotational speed (max.): 1,400 rpm, input voltage: 550 V, input current: 1,177 A, type of input current: DC, protection type (IP code): IP23, BBC DC motor Type: GN400X32F Construction: IM1001-B3 Standard: IC 06 Duty class: S1 Input voltage: 525 / 550 / 550 V Input current: 1177 / 1120 / 849 A Field voltage: 200 V Field current: 8.8 A Gksdpfxsxg Rfzo Aciob Rated power Pn kW: 580 / 580 / 440 kW RPM: 600 / 630 / 1400

Condition: refurbished (used), functionality: fully functional, power: 465 kW (632.22 HP), rotational speed (min.): 578 rpm, input voltage: 520 V, input current: 961 A, type of input current: DC, protection type (IP code): IP23, BBC DC motor Type: GN400M34F Design: IM1001-B3 Standard: IC 06 Duty class: S1 Input voltage: 520 V Input current: 961 A Field voltage: 220 V Field current: 32 A Rated power: 465 kW RPM: 578 Gksdpfxoxg Rg So Aciob

Condition: refurbished (used), functionality: fully functional, power: 349 kW (474.51 HP), rotational speed (min.): 1,422 rpm, input voltage: 520 V, input current: 713 A, type of input current: DC, protection type (IP code): IP23, ABB DC motor Type: DMA280L35B Gkedpfoxhdccjx Acijb Construction: IM1001-B3 Standard: IEC60034 Duty Class: S1 Input Voltage: 520 V Input Current: 713 A Field Voltage: 220 V Field Current: 23 A Power Pn KW: 349 KW RPM: 1422

Condition: refurbished (used), functionality: fully functional, power: 248 kW (337.19 HP), rotational speed (min.): 2,184 rpm, rotational speed (max.): 3,400 rpm, input voltage: 620 V, input current: 432 A, type of input current: DC, protection type (IP code): IP23, ABB DC motor Type: DMI225K Construction: IM1001-B3 Standard: IEC60034-1 Duty class: S1 Input voltage: 620 V Input current: 432 A Field voltage (Ufield): 220 V Godpfx Ajxhdzxjciokb Field current (Ifield): 11 A Rated power (Pn) kW: 248 RPM: 2184