Shredder , Make Kusters Venlo, No. 60193/3, Year of construction 2006, Material Stainless steel, Double shaft , With hopper , Inlet 600x400x240mm, Outlet 150x150mm, Motor 1 kW 3x 400 Volt, Mounted on legs , With switchgear , Floorspace 1.5x0.9m, Total height 2.1m, Weight 600kg, Extra Specifications Hopper and breaker are stainless steel What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination...
Technical data baler
Manufacturer BOA Machinefabriek B.V.
Type 2020.18.D (CU25LB)
Year of construction 1997
Hours of operation 40,564 hours
Press power main press 43 tons
Specific press capacity 4.9 kg/cm2
Feed channel 1,200 x 1,000 mm
Filling volume 1,3 m3
Cycle time under operating conditions 22 sec.
Bale size 1,100 x 800 mm
Drive power 18 kW
Connected load 25 kW
Tying system 4-fold vertical, fully automatic
Throughput capacity at a
bulk weight of 30 kg/cbm approx. 4,2 tons/h
bulk weight of...
Dust Extraction System
Filter Area 126 m2
Air volume 3000 m3/h
O3ps2
Max. work temperature 70° C
Differential pressure 4100 Pa
Number of filter cartridges 6
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview of our stock.
Lindner Komet 2200
No. 6032A
2 x 132 Kw
Fhii7o7bi
440V/50Hz
Year 2014
Approximately 6000 Hours
Control Cabinet with Converter ABB
HMI
Refrigerator Unit
Hydraulic Power Pack
30mm Screens
Weight: 26,000 Kg Approximately
• Fully Automatic cardboard baler
• Press power 50 t (486 kN)
• Hopper Openig:1.200 x 920 mm
• Channel cross section 750 x 1.000 mm
• 22kw Electric drive power pack
• Wire Tying System 4-fold vertical
• Bin Lift System for 1100 litre wheelie bins.
O3wxt
Shredder , Make Kusters Venlo, No. 60193/2, Year of construction 2006, Material Stainless steel, Double shaft , With hopper , Inlet 600x400x240mm, Outlet 150x150mm, Motor 1 kW 3x 400 Volt, Mounted on legs , With switchgear , Floorspace 1,5x0,9m, Total height 2,1m, Weight 600kg, Extra Specifications Hopper and breaker are stainless steel What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination...
Manufacturer BOA
Typ 182 LB 6P Super
Year of construction 1998
Working hours 36,012 h stand April
Press power main press 90 tons
Press power of pre-press 1 + 2 41,7 / 47,2 tons
Feed channel 1,620 x 1,080 mm (l x w)
Capacity per cycle time 2,5 cbm
Bale size 1,100 x 800 mm (w x h) length adjustable
Driving motor 2 x 55 kW
Connected load 130 kW
Tying system 4-fold vertical, fully automated
Throughput rate at a
bulk weight of 20 up to 40 kg/cbm approx. 8 up to 12 tons/h
bulk weight of 60 up to 80...
Windsifter Extraction for light materials
2 x extraction Fans,
1 x vibrating area
1 x out put conveyor
1 x control panel with variable speed Drive
Bsooeuhqvm
15kw Fan adjustable
5.5 kw drive power
2 x 4kw
Länge 7,60 m
Breite 2,45 m
Höhe 3,00 m
Shredder , Make Kusters Venlo, No. 60193/7, Year of construction 2006, Material Stainless steel, Double shaft , With hopper , Inlet 600x400x240mm, Outlet 150x150mm, Motor 1kW, 3x 400 Volt, Mounted on legs , With switchgear , Floorspace 1,5 x 0,9m, Total height 2,1m, Weight 600kg, Extra Specifications Hopper and breaker are stainless steel What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destinati...
Manufacturer Avermann
Typ AVOS 1810S-90/100
Year of construction 2005
Hours of operation 23,072 h
Quantity of pressed bales 16,163 piece
Xbo0xp0
Press power main press 100 tons
Specific press capacity 121,2 N/cm²
Feed channel 1,000 x 1,800 mm
Capacity per cycle time 1,35 cm³
Theoretic cycle time 12,5 sec.
Bale size 1,100 x 750 mm
Driving motor 2 x 45 kW
Connected load 130 kW
Tying system 5 fold vertical, full automatic
Throughput rate at a
bulk weight of 30 kg/cbm approx. 12,2 tons/h
bulk weigh...
BID Online auction Biomass incinerator and wood shredder.
Auction start: 29 March 14.00 hrs 2021.
Btnyqi7ziy
End date: April 28th 14.00 hrs.
www orbisauctions com/auctions/2129-online-auction-of-kara-biomassa-combustion-ins tallation-03-with-schuster-wood-shredder-11-in-panningen-nl/wood w orking/wood-shredder/1-electric-hydraulic-wood-shredder/
Electric hydraulic wood shredder, "Schuster", type LL 1000 HSLA, year of construction 2011, cap. Running hours 4352 hours, 22 kW, 400 volt, input dimen...
Shredder , Make Kusters Venlo, No. 60193/5, Year of construction 2006, Material Stainless steel, Double shaft , With hopper , Inlet 600x400x240mm, Outlet 150x150mm, Motor 1kW, 3x 400 Volt, Mounted on legs , With switchgear , Floorspace 1,5x0,9M, Total height 2,1M, Weight 600kg, Extra Specifications Hopper and breaker are stainless steel What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination...
Technical data baler
Manufacturer Bollegraaf
Typ HBC 80 AK
Year of construction 1997
Stand 02/2019 operating hours counter 42,555 hours, the counter was probably replaced, the machine has run more hours, exact status not known.
Press power main press 78 tons
Press power of pre-press 45 tons
Feed channel 1,500 x 1,100 mm
Filling volume 2.9 m³
Theoretic cycle time 22 sec.
Throughput rate under operating conditions 300 up to 450 m³/hour
Bale size 1,100 x 720 mm, length variable
Driving motor 45 kW...
Cooling lubricant maintenance trolley make HAMMA type Clean Tower 150
Machine # 1501186 Year of construction 2005
Technical data:
Capacity 150 - 300 l / min.
max. working temperature 50°
working range ph-value 6 - 11
max. return height 0,7 m
suction / return hose length 3,0 m
working tank / VA 60 l
dirt tank 60 l
Mains connection 230 V / 50 Hz
Power 0,15 kW
Weight approx. 68 kg
outer dimensions approx. 575 x 500 x 1300 mm
very little used, in very good condition
current new price
Bwwwa8pc
Princi...
Shredder , Make Kusters Venlo, No. 60193/4, Year of construction 2006, Material Stainless steel, Double shaft , With hopper , Inlet 600x400x240mm, Motor 1kW, 3x 400 Volt, Mounted on legs , With switchgear , Floorspace 1,5 x 0,9m, Total height 2,1m, Weight 600kg, Extra Specifications Hopper and breaker are stainless steel What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You ...
Technical data baler
Sugx9o
Manufacturer BOA
Typ 45 K
Year of construction 1991/ 2013 completely overhauled and renewed the PLC
Press power main press 70 tons
Feed channel 1,500 x 1,000 mm
Volume press space 1,7 m³
Theoretic cycle time 18 seconds
Bale size 700 x 1,150 mm, length variable
Driving motor 2 x 18,5 kW
Connected load 60 kW
Tying system 4-fold vertical, 2-fold horizontal, fully automatic
Throughput rate 6 up to 10 tons/hour, depends on material
Bale weight 500 up to 600 kg, depends on ...
Rotor diameter: 300 mm
Iqihu7r
Rotor width: 800 mm
inlet cross section approx. 1000 x 800 mm
drive motor 37 kW
Rotor speed approx. 140 rpm
Weight approx. 2500 kg
Chip disposal system (description in the original operating instructions.)
Transport and de-oiling of turning chips.
Components:
Scraper conveyor KF 300 - does not belong to the scope of supply.(Feeding area).
Zdbk03w
Coarse particle separator SB1
Centrifuge VSZ 350
Lifting station- pump TA 160/270 with steep conveyor and submersible pump
Vertical sandmill , Make Bühler Cobra 501, Type SRK 440, No. 10208703, Year of construction 1992, Material Stainless steel, House sizes dia.320x900mm, Inlet dia. 35mm, Outlet dia. 35mm, Motor 55 kW 380/690 Volt, With switchgear , Floorspace 2,3x1,6 M, Total height 2,8 M, Weight 2700 Kg, Extra Specifications met extra spare part behuizing inclusief rotor What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping t...
Technical data baler
Manufacturer Bollegraaf
Typ HBK 25
Year of construction 1987 / 1996 completely overhauled at the Bollegraaf factory
Press power 25 tons
Feed channel 1,050 x 800 mm (l x w)
Theoretic throughput rate 160 m³/hour
Bale size 900 x 800 mm (w x h)
Driving motor 18,5 kW
Tying system 4-fold horizontal, fully automatic
Transport dimensions only baler 6,400 x 2,000 x 2,500 mm (l x w x h)
Machine weight baler 7,5 tons
Bnpazzsiye
Condition of the baler:
The press is in a good condition...
Make: LUTRO, floor space 5,000 x 10,000 mm, can be opened on 2 sides, underfloor ventilation, fresh air supply from above, extraction from below, control cabinet
23j7vv
Item 138, No. 67
On behalf of the beneficiaries we sell a cleaning/washing cabin from LUTRO.
The general terms and conditions of Lüders & Partner GmbH apply.
Field of application: Construction
Drive: Track
Empty weight: 3.400 kg
Make of engine: Kohler
EPA Marked: yes
Delivery terms: EXW
Bq8q9olbe8
Transport dimensions (LxWxH): 4600x2330x2900
Piston homogeniser , Type NS3015P, No. 6097, Material Stainless steel, Working pressure 125 Bar, Capacity 1180 Ltr/Hr, Number of pistons: 3, Piston stroke 60mm, Motor 11,0 KW, 400/690 Volt, Year of construction 2006, Floorspace 1,5x1,2 M, Total height 1,4 M, Weight 1000 KG, CE What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barnev...
Manufacturer Bollegraaf
Type HBC 100
Year of construction 1990
Hours of operation 24,319 hours
Press power main press 100 tons
Press power of pre-press 50 tons
Feed channel 1,600 x 1,100 mm (l x w)
Capacity per cycle time 3,15 m³
Theoretic cycle time 22 sec.
Bale size 750 x 1,100 mm, length variable
Driving motor 2 x 30 kW
Tying system 5 fold vertical, fully automatic
Throughput rate at a
bulk weight of 30 kg/cbm up to 12 tons/h
bulk weight of 50 kg/cbm up to 25 tons/h
bulk weight of 100 kg/cbm ...
Exhaust air system for preparation room and cleaning/washing cabin
Recirculation, fresh air, drying, spraying, underfloor ventilation, fresh air above, extraction below, control cabinet
O7yfj
Item 139, No. 67
On behalf of the beneficiaries we sell an exhaust air system for preparation room and cleaning/washing cabin.
The general terms and conditions of Lüders & Partner GmbH apply.
Rotor diameter: 560 mm
Rotor width: 700 mm
5-knife rotor
Number of rotor knives: 5 x 2
Zqol7mkr
2 stator knife rows
inlet cross section approx. 600 x 700 mm
drive motor: 55 kW
“SGM CEM TMP 50 / 160 HG” for Sale
Ebenkf
Also many other manufacturers like: Bakker Magnetics / Steinert / Chemaperm / SKET
Find our complete stock on our website.
Manufacturer: SGM
Type: CEM TMP 50/160 HG
L x Dia.: 1.600 x 500mm
Included:
– Electrical Motor (SEW / 1,5 kW – 26 RPM)
Technical data vibrating sieve
Manufacturer ZEWE GmbH
Type vibrating screen SWS 15/35
Year of manufacture 08/2019
Operating hours approx. only 10 hours
Dimensions vibrating screen 3,500 x 1,500 mm
Perforation vibrating screen 60 x 60, 150 x 60 and 325 x 60 mm
Dimensions of the exchangeable steel screen plates 1,480 x 560 mm (w x l)
Power vibration motors 2 x 4 kW, 400 V, 50 Hz
Condition:
The system is almost like new after only 10 hours of operation. The customer wanted to screen wood chips. T...
Make: BÄR, Type: TF 1252, Year of construction: 2002, consisting of: Filter system, filter fleece, cooling water treatment, frequency pump
Item 261, No. 67
On behalf of the beneficiaries we sell a KSS-plant from Bär.
The general terms and conditions of Lüders & Partner GmbH apply.
Qau2nouf
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.