Condition: used, Year of construction: 2002, Die-cutter Iberica JRK-105 Year: 2002 Description: Stripping unit Blanking unit Nolhev Rci Dscdwvewf Technical specifications: Maximum sheet size: 750 x 1050 mm Minimum sheet size: 350 x 400 mm Minimum paper thickness (according to quality):90 – 95 g/m2 Maximum cardboard thickness: 1.5 mm Maximum corrugated board thickness: 3 mm Maximum operational pressure: 300 T Maximum speed: 8500 sheets/hour Main drive motor with variable speed: 20 CV (15 KW) Total power installed: 43 CV (32 KW) Air required pressure: 6 KG / CM2 Machine appr. Weight: 23.600 KG Floor space occupied: length 10.10 M. width 6.26 M. height 3.30 M.

Condition: excellent (used), Year of construction: 2013, 2013 Highcon Euclid (Direct to Pack) Digital Cutting and Creasing Machine Nelhcdev U A Syowvjwf Atlas Copco GA45 Compressor with Elektronicon Control. Lauda UC-0650 2 Spix Highcon PWP SR TS °C Chiller. Maximum Speed 1,500 Sheets/Hour. Maximum Sheet Size 760 x 1,060 mm (30 x 42 inches). Maximum Stock Weight 550 gsm. Maximum Media Thickness 0.6 mm (24 pt.). Supported Substrates Label and Paperboard Thicknesses From 0.2 mm to 0.6 mm and N & F Microflute Up To 1.2 mm (47 pt.). Utilises Highcon's Patented Digital Adhesive Rule Technology (DART) For Creating Digital Crease Lines and High-speed Laser Cutting. S/No.TL 50053. Integrated Extraction LTG VSRMM250/8 RD360. Machine Dimensions (W)8,600 x (D)2,100 x (H)2,300mm. Machine Weight 6.5 Tonnes. Oil-Injected Rotary Screw Air Compressor. 125L/Sec. 45kW. 3,000RPM. Weight 1 Tonne. (W)1,680 x (D)850 x (H)1,550mm. Lauda Chiller Temperature Range -5°C - 25°C. Pressure Nominal 3.7Bar, Maximum 4.7Bar. Pump Flow Nominal 196L/Min, Maximum 420L/Min. 60dBA. Water Reservoir Volume 300L. (W)1,000 x (D)1,565 x (H)1,965mm. Donaldson Torit DCE ART 501/N4 RD0 Extraction Facility. 965m³/h. Filter 10 m² Cartridge Type. 75 dB(A). 1.5kW. (W)3,900 x (D)1,700 x (H)5,000. Chimney (H)5,500mm. See Additional Documentation Attached.

Condition: excellent (used), Year of construction: 2011, Stock Laminating "AHPL - On the Fly" Type: AHPL7 - On the Fly Year: 2011 Max. Size: 1620x1620 mm Min. Size: 500x500 mm Max. Speed: 10,000 sh/h with HP mode Carrier Sheets: N-F-E-B-C-EE-BB-EB-BC - Flute up to 7.0 mm Cardboard: from 0.5 mm Printing Sheets: Paper and Cardboard 120-800 g/m² Tolerance: A-Mode Accuracy Mode: +/- 0.5 mm HP Mode Continuous Mode - High Performance +/- 1-1.5 mm On the Fly Sheet Alignment Stacker: Stack Height 1800 mm - NON-STOP Stack Weight 2000 kg Sheet Feeder: NON-STOP - Imitation Sheet feeder Sheet exit height approx. 2750 mm Noljwdrdvjhcdwvswf Stack height 1500 mm Stack weight 2000 kg Pull lays left and right Side lay left on the B-side (HP mode) Pack turner: Pack height 80-120 mm in non-stop design

Condition: used, Year of construction: 1999, Tünkers VORWAERTS S 1450 Reference No.: CU-001369 gluing machine 1999 Vorwaerst S 1230495/2 min. 200 x 280 max. 1400 x 1400 Conceal station 1230491/9 Press belt 1400 1230477/10 laminating station Substrate feeder automatic suction feeder Laminate feeder by hand Details with pressing roll Delivery on a table on stock located: Germany Nelhcdwjuuiz Rovewf available: immediately

Condition: used, Year of construction: 2008, Offer in progress! Nwolhcewftulsdwvef

Condition: new, Year of construction: 2024, / new (2020) / CE-conform / suitable for: two lane-production (one product) / materials: paper board 200 - 600 gsm / corrugated board paper with thickness not exceed 1.5 mm / max. production speed: 400 pcs/min. (according to manufacturer) / configuration: manual adjustment - Siemens PLC - glue bottles - counting system - 1 mold / option: glue spray Nwslhcdwjfztf Tsvef

Condition: ready for operation (used), Format 230 - 300 mm Nwjlhsh Ehpwecdwvof

Year of construction: 2016, Condition: refurbished (used), Fully variable air/belt cross cutter / sheeter with camera register mark for paper and film production Njlhjgqpv Docdwvewf min. format length: 100mm max. format length: 3500mm max. web width: 100mm max. web width: 2500mm max. mech. speed: 700m/min year of construction: 2015 variable in- / offline air and belt cross cutter for paper and film, with speeds up to 700m/min a.o. also with special options like multiple stacking stations, antistatic equipment, non-contact product transport and many more. For paper and film mills/manufacturers, paper and film converters, inline behind the paper or film machine or offline in the finishing/processing department For label printers (e.g. beverage labels etc.) inline behind the printing machine or offline as part of a line (also embossing etc. possible) For packaging printers (e.g. sheetfed offset) as an in-house sheeting unit for converting the less expensive reel stock - also ideal as a replacement for your Mabeg RS rollcutter or Bielomatik CutStar systems If you have any questions, please do not hesitate to contact us! Your specialists for cross cutting / sheeting technology !

Condition: excellent (used), Year of construction: 2012, IBERICA OPTIMA 105 Year 2012 Max.Speed: 9,000 Sh/h Max.Size: 760x1050 mm Min.Size: 350x400 mm 10900 running hours Max.Cutting force: 300 T Min.Paper: 90 gsm Max.Paper thicknes: 1.5mm QuickLock system Centerline Non-stop in production Nslhcjwdnrvsdwvjwf

Condition: used, Year of construction: 1973, The Bobst SP 1120-E is a punching machine equipped with a stripping unit, designed for efficient and precise punching operations. Manufactured by Bobst in 1973, this model is located in Germany, with pricing available upon request. It features a format of 780 x 1120 mm and can handle sheet sizes ranging from a maximum of 800 x 1120 mm to a minimum of 380 x 450 cm. The machine boasts a running speed of up to 6,000 sheets per hour and a cutting force of up to 300 tons. Additional features include a platform, pallet feeding with a non-stop device, sheet feeding (OS) with double sheet detection, and a centerline. Format: 780x1120 mm Equipment: Die Cutting Machine with Stripping Unit Running speed: Max. 6000 Sheets/Hour Nwslhcjv A R I Ssdwvjf Cutting force up to: 300 Tons Platform Pallet Feeder with Non-Stop device Pull guide (OS) with Double Sheet Detector Centerline Refurbished 1980 Feeder with pre-pile device Continuous feed and delivery 2 cutting chase Solid board: 0.060 Zoll (1.5 mm) Paper: from 0.005 Zoll (90 grams/sq. meter) Max. sheet 44 Zoll x 31 1/2 Zoll (1120 mm x 800 mm) Min. sheet 17 3/4 Zoll x 15 Zoll (450 mm x 380 mm) Corrugated 0.160 Zoll (4 mm)

Condition: used, Year of construction: 1998, Die-cutter Bobst SP 104-ER Year: 1998 Only around 23.000 running hours Equipped with: - Manual non-stop infeed Njlhjr I Iprscdwvswf - Quick lock in cutting chase/stripping-and blanking section - Chase loader - Two cubes - Easy transfer - Elevated

Condition: excellent (used), Year of construction: 2008, Barrel melter type RMC 200-ZPI-4/GP/SE Nwslhcov Acmtedwvef little used

Year of construction: 1989, Condition: good (used), format 30-42cm 1/4 fold 1/8 Falz avail. 7.000,00€ Nolhjh Ehm Ajcdwvewf 6- colors, 3-embossing sets hand packing

Year of construction: 1946, Condition: used, Vats - Installation of 4 concrete vats (building) including: - Agitators - Pumps - Valves - Piping - Installation of 1 concrete vat with: - Agitator - Pumps - WACO filter - Piping ----- Purification - 5 purifiers + KADANT BLACK CLAWSON Fibernet - Tank - Sand removal screw - Conical stainless steel pulp chest - LAMORT purifier (partially dismantled, as is) ----- Supply - ALLIBE stainless steel vat - Pumps - Regulator - Control system ----- Starch water pumps - 2 MORET motor pump units - Stainless steel tank - Equipment for concrete vat (building) - Pumps - Piping ----- Paper Machine No.2 Brand: NEYRET-CORDEBART-THIRY – Year: 1946 Width: 2450 mm Hood and steam installation: BELLMER 1) Wet section - Natural drying: - 6 stainless steel suction boxes for paper dewatering - Mechanical drying: - 7 suction boxes with ceramic and plastic linings - Suction cylinder 2) Press section Nelhcdwswbg Svsvjwf - Press No.1 with 2 cylinders (pneumatic tightening, LAMORT doctor blade) - Press No.2 with 2 cylinders (pneumatic tightening, LAMORT doctor blade) - Press No.3 with 2 cylinders (pneumatic tightening, LAMORT doctor blade) - Press No.4 "OFFSET Press" with 2 cylinders (hydraulic tightening) 3) Dryer section Installed in a large BELLMER suction cabin with automatic doors – humidity control system - Pre-dryer section: - 24 drying drums - 5 felt dryers - 23 doctor blades - Size press: - 2 cylinders - Pneumatic tightening - Reducer - 2 doctor blades - Post-dryer section: - 14 drying drums - Drying system: LANG (steam-based) 4) End of line - Rewinder with multiple cylinders - Sheet cutter: IBS RCS 5000 - Pneumatic equipment ----- MAP 2 Control Room - Digital control desks - Electronic installation - Paper monitoring scanner - Small furniture: coffee machine, top refrigerator, hot oven THERMOS SR1000 - Insect destroyer - Workbenches, vise, small rack ----- MAP 2 Sauce Kitchen - Remote-controlled sauce distribution network - Stainless steel storage - Agitator - Pumps - Valves - Filters ----- Sauce Preparation Kitchen (similar to MAP 1 and MAP 2) - 100T starch silo (old) with: - Valves - Dispenser - 2 pumps - Milk preparation tank - 2 dosing units for retention products (old) - Suspended milk cooker with digital control including: - Agitator - Pump - Double-jacket delumper - Steam extraction system - Tanks, pumps, mixers - Piping - Colorant installation ----- Vacuum Production Installation - 8 ALLIMAND vacuum pumps ----- Sauce Distribution Network

Condition: excellent (used), Year of construction: 2002, ANTER 800 year 2002 – serial Nº 576/632 straightline boxes, lockbottom boxes, 4 corner boxes Max. size: 800mm; min. size: 106mm Max. length box: 650mm, min. Length box: 60mm Material: cardboard from 200gr/m2 up to 600gr/m2 Speed: Up to 350m/min. Nwjlhjwb Ur Rscdwvsf Cold glueing unit PAFRA with 2 guns Semiautomatic packer VESTAPACK year 2001, nº 507

Condition: like new (used), Year of construction: 2022, High speed digital cutter: • Cutting area: 3500 x 1600 mm • Max. speed: 1500 mm/s • Conveyer system • Camera inspection Nwolhcdwowd Hl Usvsf • All tools • iEcho control with cutterserver

Condition: used, Year of construction: 1984, Die-cutter Bobst SP 142-ER Year: 1984 Hours: 29.924 (on counter; real expected production hours around 60.000/70.000) Equipped with: - Stripping and Blanking Stations - Push Lay system Nweljr I Ipvjhcdwvsf - Non-Stop Feeder with manual change over bars - Non-Stop Delivery - Corrugated board feeder - Quick locking Tooling in Stripper - Micrometric system Technical specifications: - Max cutting speed : 6.000 s/h - Max sheet size : 1420 x 1020 mm - Min sheet size : 700 x 500 mm - Cutting force : max. 600 T - Solid board up to 2.000 g/m2 - Corrugated board up to 4mm thick

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: SEM126/TH46098, Automatic Carton Folder Gluer, Max open blank width: 1100 mm, Min open blank width: 126 mm, Max feed up length: 800 mm, Min feed up length: 60 mm Nwelhcsv Ipl Tjdwvof Stock : Cartonboard up to 800 gsm, Corrugated up to E flute.Max belt speed i: 425 m/min Complete with : Bottom belt feeder, Back lifters with vibration for smooth and consistent feeding, Pre-breaking system, Small box attachment - allowing min 76mm open blank width, Crash-lock module, Bottom left hand side glue pot, Three belt carrier folding section, Heavy duty Double Trombone delivery, Compression belt section, HHS C-1100 8 B cold glue system, 4 x HHS glue guns, Remote control, Manuals and electrical diagrams.

Year of construction: 1987, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 3513Z, Giebeler table setting machine for sale. The machine is set up and working. There are four inking units, two of which are functional, a satin finishing unit, drying and stacking with strip inserter and associated counting. A video of the machine in production is available. Nolhcevtwtvedwvowf

Condition: excellent (used), Year of construction: 1986, Window patch machine Nwjlhowb Dqpjcdwvsf Heiber & Schroeder Year 1986 Model WP1

Condition: excellent (used), Year of construction: 2011, Carton erecting machine - Heiber & Schroeder Year 2011 Model: CE 1000-2 Njlowb Dnnohcdwvewf

Condition: excellent (used), Year of construction: 2006, Hot foil machine BRAUSSE 1050 SEF Year: 2006 Njljwb Dk Aehcdwvswf Max.Size: 1050x750 mm Max.Speed: 7500 Sh/h Max.cutting force: 300 T 3-foil pull roller

Condition: like new (used), Functionality: fully functional, Year of construction: 2016, Die cutting machine IBERICA OPTIMA 106 Year 2016 Max.Speed: 9,000 Sh/h Max.Size: 760x1050 mm Min.Size: 350x400 mm 10900 running hours Max.Cutting force: 300 T Min.Paper: 90 gsm Max.Paper thicknes: 1.5mm Nwslhcdwjwb Ag Novsf QuickLock system Centerline Non-stop in production

Condition: good (used), Year of construction: 1986, Window Patching Kohmann F 1010/2 Year 1986 machine as it is – will be cleaned – with Kohmann suction belt feeder – with adjustable chain station squaring section Nwslhcdjk Nb Iujwvsf – with suction table – max format 1000 x 700mm – min format 100 x 80mm – Variable cut off length of foil by means of the change gears – with stereo cylinder and glue-impression roller – The glue stereo can be made ready outside the machine. The stereos are glued onto a carrier film which then can be easily mounted onto the stereo cylinder in the machine. In this way the stereo can be stored for reuse on repeat jobs. – with delivery station – electrical equipment for 380 v, 50 cycles AC – with electrical push-button controls, – with pressure and vacuum pump incl. motor

Condition: excellent (used), Year of construction: 2000, ANTER 1100 Year 2000 - Serial Nº 905/629 Styles: straightline boxes, lockbottom boxes, 4 and 6 corner boxes Nwslhcdswbf Snjwvef Material: Cardboard from 200gr/m2 – 600gr/m2; Corrugated board E flute Max. width size: 1100mm, Min. width size: 106mm Max. box length: 850mm, Min. box length: 60mm Speed: up to 350m/min Cold glueing unit PAFRA with 3 guns Wired remote control Power requirement: 30kVA Electrical installation: 380V Total length: 12,875m Total width: 1.57m Weight: 5,830Kg Machine in production and in good condition Availability: Location: Europe