Used Platform Type Mb for sale (40,228)

Condition: used, all stainless steel dimensions: ± 5.000 x 2.200 x 2.700 mm drum diameter: 1.300 mm net drum length 4.200 mm adjustable inclination angle easy to clean inlet height: ± 1.700 mm (adjustable if necessary) discharge height: ± 1.000 mm power 3kW 400V, 50Hz 4 spray pipes Nwjdpfxjym Rvbs Adbsc Provided for extraction

Condition: used, loading : max. 2.800 kg (depending on the product) all stainless steel vacuum pump not included suitable for cooling PLC control adjustable speed tilting system to discharge Nodpfx Ajymnnnsdbjwc 1 water filter dimensions (l x w x h) : ± 3.490 x 1.820 x 2.250 mm power: 5,9 kW

Condition: used, continuous blanching / pasteurizing / cooking vessel or cooling plant shaftless spiral : perforated drum with welded screw (helix configuration) by which the products are gently transported through the water complete insulated closed system : energy saving by the insulation of the entire machine and the indirect steam heating net length ± 11 m width 3.100 mm all stainless steel adjustable speed variable dwell adjustment suitable for steam heated • connection 400 kg / h (5 bar) heat exchanger circulation pump with outfeed conveyor belt for unloading with elevating spiral screw for loading in good condition Njdpjymnnhjfx Adbswc Applications : • Blanching of vegetables and potato products • Pasteurising and/or after-pasteurising of vacuum-packed products • Cooking of sausages in natural or artificial casings • Cooking of heads and tongues • Cooking of poultry • Continuous soup production

Condition: used, loading : max. 2000 to 2200 kg (depending on the product) Nwsdpfx Adjyizkzeboc all stainless steel vacuum pump not included Lutetia control adjustable speed tilting system to discharge 1 water filter dimensions (l x w x h) : ± 3.600 x 1.550 x 1.990 mm

Condition: used, loading : max. 50 to 55% (± 1.800 kg) all stainless steel Lutetia control adjustable speed (frequency inverter) 2 main motors (6,6 kW) dimensions (l x w x h) : ± 3.500 x 1.500 x 2.000 mm loading height : ± 1.150 mm weight 1.400 kg vacuum pump not included Njdpjyididjfx Adbowc

Condition: used, “FED” Drum Coater Type Crumb breader for dry coatings Nwjdpfxjyf D N Ee Adboc all stainless steel belt width 400 mm adjustable speed min. 300 gr coating material adjustable angle fom 0 to 8° overall dimensions (L x W x H) : ± 4.400 x 1.450 x 1.800 mm infeed belt belt width 300 mm Elevating spiral screw

Condition: new, NEW ! PLC control with 50 programs loading : max. 160L with vacuum pump “Busch” 21m³ 2,3 kW weight 380 kg dimensions (l x w x h) : ± 1.320 x 1.380 x 1.540 mm adjustable speed from 2 up to 9 rpm a wide variety of products like: all kinds of salads, meat and fish, can be mixed / tumbled with the Bartumb. Nodpfx Aoyfnvvodbewc

Year of construction: 1998, operating hours: 5,400 h, condition: good (used), functionality: fully functional, Sawblade –Ø: 500 - 1000 mm Cutting lenghts for saw blade – Ø 500 mm = 3400 mm Saw motor output: 18,5 KW 400 Volt, 50 Hz. Standard rot. speed: 1.000 / 1.450 U/min. Support: electrical vertical adjustment of saw blade; stroke ca. 550 mm Support: electrically swivelling from 0°- 48°. Control: Electronic sequence - cutting control Automatic program: for soft and hard stones Operator panel : swiveling Folding bellows cover Bridge and cross guides Machine rotary table Size: 3400 x 1500 x 800 mm Table can be rotated manually through 360°, with fixed locking at 90° intervals, or individually Nwjdpfx Aeym Nzpodboc in any position. Side stops can be folded down manually

Condition: new, NEW ! all stainless steel loading : max. ± 500 kg (depending on the product) PLC control with 50 programs adjustable speed from 0 up to 9 rpm Nwsdpjyc Sgyofx Adbsc with vacuum pump Büsch with water filter dimensions (l x w x h) : ± 2.550 x 1.300 x 1.650 mm

Condition: used, breader suitable for standard and Japanese crumbs and corn flakes all stainless steel mobile adjustable speed with air knives with pressure roler belt width 1000 mm Nsdpfx Adeycqr Isbewc dimensions (l x w x h) : ± 2.800 x 1.850 x 2.500 mm

Condition: used, machine/vehicle number: XL9T0N30004415017, axle configuration: 3 axles, first registration: 07/2005, total length: 13,600 mm, total width: 2,550 mm, wheelbase: 9,110 mm, color: other, Year of construction: 2005, = Additional options and accessories = - Air Suspension Nwedpfx Aeydlt Njdbsc - BPW Axles - Drum brakes = More information = Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 6.390 kg Carrying capacity: 38.610 kg GVW: 45.000 kg Registration number: OH-39-ZG

Condition: used, Year of construction: 2025, machine/vehicle number: PB14975, Drivetrain Type of fuel: LPG Weights Nodpfx Ajwfmpcjdbewc Empty weight: 2.490 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.760 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 920 m Transport dimensions (LxWxH): 5.21x0.79x1.95 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2026, machine/vehicle number: PB15569, Drivetrain Type of fuel: LPG Weights Nsdpfxjx Ravtj Adbswc Empty weight: 2.980 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.170 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1030 m Transport dimensions (LxWxH): 5.63x0.95x2.07 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2010, functionality: fully functional, Two used briquetting presses from Pawert SPM / 3 briquetting presses from DI PIÙ The Pawert presses include, according to the following specifications: - 2 steel sheet silos, each with approx. 20 m³ usable volume, including silo discharge system - 1 briquetting press, make SPM PAWERT AG, type 84/1 - 90/200, machine no.: 1060, power 55 kW Nedpfx Adeyiyhfjbswc - 1 briquetting press, make SPM PAWERT AG, type 96/1 - 90/200 SBP, machine no.: 1140 - Complete conveyor system including 2 cooling lines, conveyor belts, roller conveyors, etc. - 2 cross-cut stations - 1 noise protection cabin for cross-cut saws - 1 feeder, make KÖRA, model Packmat, likely type EF-235 - 1 shrink wrapper, make KALLFASS, type Super Wrap 650 - De Luxe - inline, machine no.: VD 03.08.445, year 2000, incl. shrink tunnel - Accessories: control and power cabinets, PC controls, frequency converters - Spare parts according to appendix 1 Plant boundaries: - Material infeed: flange of chip conveyor in chip container before the presses - Power supply: input terminals in Pawert control cabinet _____ Technical data (per machine): Type: Di Più BRIK MB100 Year of manufacture: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Pressing force: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total installed power: approx. 98 kW Material moisture: optimal 8 – 12 % Particle size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic piston press — Equipment: Material hopper Feed screws Hydraulic system Control cabinets Saws for briquette length cutting Protective cladding & safety systems Discharge units — Scope of delivery: 3 complete briquetting presses Di Più MB100 Saws Conveying technology & accessories Spare parts by agreement — Areas of application: Sawmills Wood processing Biomass operations Briquette production for energy & sales Location: 3383 Inning Transport: can be organized by arrangement Price: on request Available for individual sale or as a complete package

Condition: used, Year of construction: 1973, overall weight: 8,000 kg, output current: 192 A, nominal power (apparent): 1,680 kVA, continuous power (apparent): 1,680 kVA, MTU EZ531, type MB16v652, 1973 + ASEA GF 630L generator Nwodpfjvu T Npex Adbsc

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min Njdpfx Aexabm Nsdbswc bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: Nwsdpfx Asxabl Sedbjc - control (integrated) - foot switch

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Nwjdpfx Adjxaatnobec Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. Nwjdpfx Adjxaafqebec - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm Njdoxrb Rfjpfx Adbswc - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: good (used), Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, Router, Ethernet Security Router -Manufacturer: MB, Router mbnet mini -Type: MDH 860 -Voltage: 12-24 V Nwodpfxjyhnc Ij Adbec -Dimensions: 95/70/H35 mm -Weight: 0.4 kg

Condition: used, Year of construction: 2012, Overview  This brewhouse and utilities package was manufactured between 2001 and 2023 by European manufacturers including Slowbeer, GG-Technik, Lavor, Sommer, Quantor and others. The package centers around a 500 L brewhouse and includes steam generation, milling, cooling, compressed air and transfer pumps. Personal inspection is possible, Technical data  Brewhouse capacity: 500 L Configuration: 3 kettles + hot water tank + cold water tank + boiler Steam heated Cooling capacity: 35.8 kW Scope of Delivery  Brewhouse | Slowbeer | MB-500MAN | 2012 | 500 L, incl. tanks & boiler Steam Generator | GG-Technik | TD9 | 2016 | 5 kW Steam Generator | Lavor | GV Vesuvio | 2014 | 18 kW, serviced 2025 Malt Mill | Sommer | Piccolo 11 S | 2012 | Grain mill Cooling Unit | Quantor | Q352RHQ | 2021 | 35.8 kW Air Tank | Fiaseis | Coinox | 2023 | 270 L, stainless steel Compressor | CompAir | WinVOM L15 7.5 | 2001 | — Transfer Pump (2x) | Ebara | CDXM-B120-20 | — | Stainless steel Air Dryer | — | E2000 | 2001 | Air drying unit Nedpfoyg R Dlox Adbjwc

Condition: used, Year of construction: 2024, operating hours: 261 h, machine/vehicle number: PB14410, Drivetrain Type of fuel: LPG Nwedpfx Asyaxcvedboc Weights Empty weight: 2.430 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.760 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 920 m Transport dimensions (LxWxH): 5.21x0.79x1.95 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2024, operating hours: 200 h, machine/vehicle number: PB14650, Drivetrain Type of fuel: LPG Weights Nwodpfx Adoyaxcijbsc Empty weight: 2.430 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.760 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 920 m Transport dimensions (LxWxH): 5.21x0.79x1.95 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2024, operating hours: 201 h, machine/vehicle number: PB14740, Drivetrain Type of fuel: LPG Weights Empty weight: 2.430 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.760 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Njdpfjyaxb Ssx Adbjwc Max. horizontal reach: 920 m Transport dimensions (LxWxH): 5.21x0.79x1.95 Additional information Please contact PFEIFER GROUP for more information