Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: S40-0051, type of input current: three-phase, input voltage: 400 V, working width: 3,210 mm, cutting width (max.): 3,210 mm, laser power: 400 W, type of cooling: water, laser type: CO₂ laser, laser source model: Firestar f400, Equipment: fume extraction, The system consists of: Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system Sigma C13 – Cooling unit for the laser system Aigner VENT Set SP 3000 – Extraction and ventilation unit ASCO BV – Unwinding and material feed system for roll goods JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm Firestar – CO₂ laser source Gkjdpezuyg Refx Acmod The system is currently located in Worms and was used in ongoing production until the plant was shut down. Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement. The system is offered in its current condition and with the components shown in the pictures.

Condition: like new (used), Year of construction: 2025, operating hours: 200 h, functionality: fully functional, feed length X-axis: 800 mm, feed length Y-axis: 450 mm, JUKI PS-800HB8045ZNZ – Programmable CNC Heavy Duty Sewing Machine – 800 × 450 mm For sale: JUKI PS-800HB8045ZNZ, an industrial, programmable CNC sewing machine in a Heavy Duty version, designed for precise sewing of technical fabrics, tapes, straps, and other textile products. The machine was manufactured in 2025 and has only approximately 200 operating hours. It is in very good visual and technical condition, practically like new. The unit is 100% functional, regularly serviced, and ready for immediate operation. The machine is located at our production facility in Gdańsk. It is possible to start it up, inspect it, and test it before purchase. Technical specifications Gsdpfx Asz Dk Eyocmekd * Manufacturer: JUKI * Model: PS-800HB8045ZNZ * Year of manufacture: 2025 * Operating hours: approximately 200 hours * Sewing area: 800 × 450 mm * Version: Heavy Duty – for sewing heavier materials * Control: electronic, programmable CNC * Automatic thread trimming * Sewing pattern programming * Control panel for operation and pattern programming * Possibility of importing patterns via USB * High accuracy and repeatability of sewing Additional equipment included in the price of the machine * Lower thread end sensor * Dedicated cassette / tooling for sewing MOLLE systems * Dedicated cassette / tooling for sewing mesh The additional tooling allows the machine to be used in the production of specialized textile products. Applications The JUKI PS-800HB8045ZNZ is ideally suited for the production of: * Tactical and military equipment * MOLLE systems * Backpacks, vests, and protective gear * Technical tapes and straps * Industrial textiles * Industrial filters * Mesh components * Other products requiring precise, repeatable sewing according to a programmed pattern Thanks to its large working area of 800 × 450 mm and the ability to program patterns, the machine is suitable for both serial production and the execution of specialized sewing operations. Technical condition The machine is used but is in near-new condition. * Fully functional * Very low operating hours – approximately 200 hours * Regularly serviced * Ready for immediate operation * Can be inspected during operation before purchase Location and sales conditions Location: Gdańsk, Poland The machine is available immediately. It is possible to view and test the unit at our production facility after prior arrangement. Sale is based on a VAT invoice. We can provide assistance with loading the machine. Additional photos and a video showing the machine in operation are available upon request.

Condition: used, Year of construction: 2021, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: NRGL614.01025, type of input current: AC, total width: 3,340 mm, input voltage: 400 V, input current: 19 A, SEI NRGL 1612 V300 – 300 W Industrial CO₂ Laser Cutter with Automatic Material Loader – Operational Industrial SEI NRGL 1612 V300 laser cutting system for sale. Manufactured in 2021 and equipped with a 300 W CO₂ laser source and material loading system. The machine is fully operational and available for inspection. Approximately 10,000 operating hours. Key Features: • SEI NRGL 1612 V300 • Year: 2021 • 300 W CO₂ laser • Working area: 1600 × 1200 mm • Automatic material loader included • Approx. 10,000 operating hours • Operational and available for testing • Located in Munich Germany Suitable for industrial processing of acrylic, textiles, technical fabrics, wood, paper, cardboard, and other non-metal materials. Price: €30,000 VB Gkjdpfozcny Ajx Acmsd Additional photos, videos, technical documentation, and inspection appointments available upon request. Transportation not included, can be discussed defined and agreed.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4DOUG52347, power of the servo motor: 550 W, input voltage: 230 V, clearance between the columns: 261 mm, type of input current: AC, throat depth: 130 mm, pneumatic connection: 6 bar, Professional Production Set of Six JUKI Industrial Sewing Machines from the MASI JEANS Factory This lot consists of six JUKI DDL Series industrial single-needle lockstitch sewing machines, removed directly from the production lines of the former MASI JEANS factory in Estonia. The JUKI DDL-8500 and DDL-8700 Series are among the world's most widely used industrial sewing machines, renowned for their reliability, smooth operation and consistent stitch quality. Designed for continuous production environments, they are an excellent choice for garment manufacturers seeking dependable, high-speed sewing equipment. Because all machines operated in the same factory, this matched production set offers consistent performance, common spare parts, simplified maintenance and identical operating principles, making it ideal for expanding an existing production line or establishing a new sewing department. Bundle Contents Machine 1 Model: JUKI DDL-8700-7 Internal Reference: 6A Machine 2 Model: JUKI DDL-8700-7 Internal Reference: 109A-7078 Machine 3 Model: JUKI DDL-8500 Year: 2002 Internal Reference: 113A-7101 Machine 4 Model: JUKI DDL-8500-7 Year: 2001 Internal Reference: 26B-7049 Machine 5 Model: JUKI DDL-8700-7 Gedpjznlbyefx Acmokd Internal Reference: 27B-7088 Machine 6 Model: JUKI DDL-8700-7 Year: 2002 Internal Reference: 28B-7090 Technical Specifications Manufacturer: JUKI Corporation Model Series: DDL-8500 / DDL-8700 Machine Type: Industrial Single-Needle Lockstitch Sewing Machine Country of Manufacture: Japan Maximum Sewing Speed: Up to 5,000 stitches per minute Fully Automatic Lubrication System Complete Industrial Workstations Heavy-Duty Steel Stands Five machines equipped with the JUKI "-7" electronic automation package featuring: • Automatic Thread Trimming • Automatic Backtacking • Automatic Needle Positioning Key Features • Factory-matched production set • Six professional JUKI industrial sewing machines • High-speed, reliable industrial performance • Excellent stitch quality for continuous production • Common spare parts and maintenance procedures • Complete workstations ready for installation • Proven Japanese engineering Applications • General garment manufacturing • Denim and jeans production • Workwear and uniforms • Shirts and sportswear • Medium-weight woven fabrics • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained operational until the scheduled closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all associated costs. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1874120080, overall weight: 180 kg, Equipment: clamp, documentation/manual, Veit model 8741 BT TOP trouser pressing mannequin. Year of manufacture: January 2017. Very good condition. I have two of these machines for sale. Gsdpfxs Ahm Uwj Acmekd

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL031303405S, For sale is a single unit consisting of a textile carousel with a matching conveyor dryer: M&R Sportsman EX 8/6 textile carousel, built in 2013 Gkedpfxov Iy H Is Acmsd Total print count: 1,168,378 Diameter: 386 cm Weight: 1,497 kg Power supply: 380 V Pallets: Textile - 40 x 55 cm, 8 pieces Pockets - 30 x 40 cm, 8 pieces Sleeves - 15/12 x 40 cm, 8 pieces Squeegees: 6 x flood and 6 x pressure squeegees Screen fit with TRI-LOC M&R Radicure D 36/6-3 conveyor dryer, built in 2012 Conveyor width: 91 cm Drying channel length: 183 cm Total width: 127 cm Total length: 305cm Weight: 817kg Power supply: 380V Price negotiable

Condition: excellent (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, Sheffield HC-810 Automatic Hot/Cold Strip Cutting Machine with PF-33 Automatic Prefeeder For sale: Sheffield HC-810 industrial automatic hot/cold cutting machine, supplied together with the Sheffield PF-33 automatic prefeeder. The machine is designed for precise and efficient cutting of webbing, straps, tapes, ribbons, and other textile materials. The hot cutting function allows synthetic materials to be cut and heat-sealed simultaneously, preventing fraying and ensuring clean, durable edges. The equipment is suitable for industrial textile production, including the manufacture of tactical equipment, belts, straps, bags, backpacks, and other products requiring accurate, repeatable cutting. Main features: * Automatic hot and cold cutting * Maximum cutting width: 6¼ inches (approx. 159 mm) * Electronic control panel * Programmable cutting length * Adjustable feeding speed * Automatic piece counter * Adjustable blade dwell time for thicker materials * Automatic material feeding * Precise and repeatable cutting operations * Suitable for nylon, polyester webbing, straps, ribbons, and similar materials * 220 V version Included equipment: * Sheffield HC-810CE-220V automatic hot/cold cutting machine * Sheffield PF-33-220V automatic prefeeder * Original operating manual * Additional accessories and parts shown in the photographs Gsdez Nyv Topfx Acmokd Automatic feeding system: The Sheffield PF-33 prefeeder facilitates the feeding of material from rolls, ensuring a consistent material supply during automatic cutting operations. The combination of the HC-810 cutting machine and PF-33 prefeeder provides an efficient solution for repetitive industrial cutting tasks, reducing manual handling and improving production consistency. Technical condition: The machine is 100% fully functional, in excellent working condition, and ready for immediate use. All functions operate correctly. The equipment requires no repairs and is ready to be integrated into a production process. The machine is used but remains in very good overall condition, with normal signs of industrial use. Additional information: * Manufacturer: Sheffield Cutting Equipment * Model: HC-810CE-220V + PF-33-220V * Year of manufacture: 2024 * Purchase date: February 2025 * Condition: Used, fully functional * Availability: Immediately available * Location: Gdańsk, Poland The machine can be inspected and tested by prior appointment. The equipment is offered as a complete cutting and feeding system, including the accessories shown in the photographs.

Condition: used, Year of construction: 1997, functionality: unexamined, machine/vehicle number: K2266, MAMMUT VMK 3 250 CNC 601 multi-needle industrial sewing machine, double-chain stitch, manufactured by Nähmaschinenfabrik Emil Stutznäcker (Cologne, Germany). A benchmark machine in the bedding industry for the continuous quilting of mattress casings, duvets, bedspreads, and panels. Features: - Manufacturer: MAMMUT (Emil Stutznäcker GmbH & Co. KG) - Type: VMK 3 250 CNC 601 - Year of manufacture: 1997 - Serial number: K2266 - Stitch type: double-chain stitch - 3 rows of needles, 75 mm spacing between rows - Minimum needle spacing: 25 mm - Working width: approximately 2,500 mm - CNC 601 numerical control - Integrated thread stand (cone holders) - Unwinders and fabric roller - Electrical cabinet with control and emergency stop - CE marking Gkodpjz N A Ryefx Acmod Location: Mouscron, Belgium Sale EXW, loading possible upon request.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Dürkopp Adler 745-34-2B Automatic Pocket Sewing Machine – Additional Machines Available IMPORTANT PRICE INFORMATION: The advertised price applies ONLY to ONE Dürkopp Adler 745-34-2B automatic pocket sewing machine (10/16 mm). All other machines listed below are available for sale separately and are NOT included in the advertised price. Prices for these additional machines are available upon request. We are offering several Dürkopp Adler industrial automatic pocket sewing machines from our garment production facility. The machines are designed for the automatic production of piped, flap and welt pockets and are suitable for industrial trouser, jacket and garment production. Main machine included in the advertised price: Dürkopp Adler 745-34-2B – Automatic Pocket Sewing Machine – 10/16 mm – 1 unit Additional machines available (NOT included in the advertised price): Dürkopp Adler 739 991001 K3 – BVL Automatic – 2015 Gkjdpfezzkurex Acmsd Dürkopp Adler 745-34-2A – Piped/Welt Pocket Automatic – 30 mm – 2 units Dürkopp Adler 1970 – Automatic Sewing Unit for Attaching Pocket Facings The Dürkopp Adler 745 series is designed for the automatic sewing of piped pockets, flap pockets and welt pocket openings. Depending on the machine configuration, the units are equipped for different pocket widths and production applications. All machines come from an industrial garment factory and were used in professional production. Please note: Photos in this advertisement may show several different machines. Only ONE Dürkopp Adler 745-34-2B is included in the advertised price. Location: Romania Sales options: Individual machines or complete package Additional machine prices: On request Inspection of the machines can be arranged. Additional photos, machine identification details and videos are available for serious buyers upon request. We welcome offers for individual machines or for the complete package.

Condition: ready for operation (used), functionality: unexamined, machine/vehicle number: 9375, working width: 3,000 mm, Possible technical specifications (based on comparable models) Needle configuration: 2-needle, suitable for hemming with pleats. Cylinder arm: For efficient processing of round garment parts such as sleeves and waistbands. Speed: Depending on the specific model and application; comparable machines reach speeds of up to 6,500 stitches per minute. Options: Automatic thread trimmer. Dust extraction system. Label feeder system. Side seam turning system for automatic turning of side seams. Applications Hemming T-shirts, polo shirts, sweatshirts, and sportswear. Gksdpfswt Rcpsx Acmed Processing of waistband and sleeve hems with high productivity and consistent quality. Ideal for production environments where speed and consistency are essential. Lot is located in a crate. Year of manufacture not readable. Crate dimensions: Length 305 cm Width 155 cm Height 152 cm

Condition: used, Roaches 3 Bad Labor Dyeing Machine Gjdpsuzhqrofx Acmjkd Roaches 3 Bad Labor Dyeing Machine 400 V 6600 W 10 A H x W x D = 920 x 1760 x 450 mm More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total width: 2,580 mm, total length: 2,076 mm, input voltage: 380 V, working width: 1,600 mm, total height: 2,135 mm, cutting width (max.): 1,600 mm, cutting height (max.): 15 mm, PARMEL PICO – Compact. Versatile. Precise. Gksdpfx Acj Akbzcjmod The PARMEL PICO 1016 is a modern, digital CNC cutting system specifically designed for prototype development, sample production, and small to medium production runs. Thanks to its compact design and integrated conveyor belt technology, the PICO offers maximum flexibility with minimal space requirements. The machine is ideal for processing leather, textiles, synthetic leather, and various flexible materials – both as individual pieces and from rolls. Its advantages at a glance: Compact design: Ideal for companies with limited space. Versatile material processing: Suitable for leather, textiles, synthetic leather, and various roll materials. Integrated conveyor belt: Enables continuous material feed and efficient processing. Flexible tool configuration: Various cutting, punching, marking, and milling tools available. High precision: Digitally controlled cutting processes for consistent quality. Ideal for prototypes and small series: Particularly suitable for sample departments, product development, and flexible manufacturing processes. Attractive price-performance ratio: Professional CNC cutting technology for an economical entry into digital manufacturing.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2D3BF00270, power of the servo motor: 550 W, input voltage: 230 V, clearance between the columns: 262 mm, type of input current: AC, throat depth: 130 mm, pneumatic connection: 6 bar, This premium lot consists of four JUKI DLN-5410 series industrial needle-feed lockstitch sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. The JUKI DLN-5410N-7 is one of the world's most respected industrial needle-feed lockstitch sewing machines, renowned for its exceptional reliability, high sewing speeds and outstanding stitch quality. Its needle-feed mechanism synchronizes the movement of the needle with the feed dog, significantly reducing material slippage, seam puckering and ply shifting compared to conventional drop-feed machines. Ideal for denim manufacturing, workwear, uniforms, technical garments and other medium-weight industrial sewing applications. Bundle Contents Machine 1 Model: JUKI DLN-5410N-7 Year: 2009 Internal Reference: 23A-7222 Manufacturing Number: 2D3BE00023 Machine 2 Model: JUKI DLN-5410N-7 Year: 1999 Internal Reference: 26A-7003 Manufacturing Number: 2D3BF00270 Machine 3 Model: JUKI DLN-5410N-7 Year: 2009 Internal Reference: 27A-7226 Manufacturing Number: 2D3BE00024 Machine 4 Model: JUKI DLN-5410-7 Year: 2009 Internal Reference: 17B-7224 Manufacturing Number: DLNAJ38908 Technical Specifications Manufacturer: JUKI Corporation Model Series: DLN-5410N-7 (3 machines) / DLN-5410-7 (1 machine) Machine Type: Industrial Single Needle Needle Feed Lockstitch Sewing Machine Country of Manufacture: Japan Maximum Sewing Speed: Up to 5,000 stitches per minute Maximum Stitch Length: 4.0 mm Needle System: DB×1 Presser Foot Lift: 5.5 mm by hand / 13 mm by knee lifter Feed Mechanism: Needle Feed with Bottom Feed Lubrication System: Fully Automatic Centralized Lubrication Integrated Electronic Control System Automatic Thread Trimmer Automatic Backtacking Automatic Needle Positioning Industrial Sewing Table and Heavy-Duty Steel Stand Production Benefits • Needle-feed system minimizes material slippage and seam distortion • Excellent stitch quality on multi-layer fabrics • Consistent seam appearance at high sewing speeds • High productivity in continuous industrial operation • Reliable Japanese engineering • Proven long-term durability in professional garment manufacturing Why Purchase This Lot • Four matching production machines from the same factory • All machines used on the same production line • Consistent sewing quality across all workstations • Common spare parts inventory • Simplified maintenance procedures • Reduced operator training requirements • Cost-effective way to establish or expand a production line Applications • Denim manufacturing • Jeans production • Workwear • Uniform production • Technical garments • Medium-weight woven fabrics • Shirt manufacturing Gedpfxezmy Acj Acmekd • Industrial garment production Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: like new (used), Year of construction: 2022, operating hours: 287 h, functionality: fully functional, type of input current: three-phase, total width: 265 mm, total length: 415 mm, input voltage: 400 V, input current: 25 A, feed length X-axis: 1,800 mm, feed length Y-axis: 3,000 mm, working width: 1,800 mm, total height: 142 mm, cutting width (max.): 1,800 mm, cutting height (max.): 300 mm, front table length: 2,000 mm, hole diameter: 2 mm, Orox Tailor T 300 Automatic Cutting Machine for Sale – Complete, Turnkey Solution We are offering for sale a 2022 Orox Tailor T 300 automatic cutting machine in excellent condition, featuring extremely low operating hours. The equipment was used in a family-owned business where its capacity significantly exceeded actual production requirements; therefore, it is being offered for sale. Key advantages of the system: • Complete, integrated cutting solution • High-value (~€10,000) professional software package • Built-in photo system for recording fabric lays • Exceptional support for processing patterned materials • Detection of material defects and precise marker alignment • Supports digitization of cutting patterns • Immediate production start possible without additional investment Package includes: • Orox Tailor T 300 automatic cutting machine • Grafis pattern and nesting optimization software Gkodpfoya Hhtex Acmod • Integrated photo system • Dedicated computers • 2-meter preparation/cutting table • Compressor and full accessories kit Upon request, an independent technical inspection and assistance with transport and installation can be provided. Price: HUF 35,000,000 + VAT Serious enquiries only – please contact us for further information.

Condition: used, Year of construction: 2009, For sale is a used Bullmer PremiumCut CV. Year of manufacture: 2009. This cutting machine comes from a company liquidation. Gjdpfxj Ab Nr Ho Acmokd Technical data according to the supplier: Working area: 1900 x 1450 mm Maximum cutting speed: V max Wm/min Cutting thickness: 10 mm Knife system: Oscillating drag knife and ultrasonic knife Increased air flow: 50 m3 per minute instead of 42 m3/minute Vacuum unit: Modified to a Rovicore RTM vacuum table with a distribution channel. The cutting machine has been dismantled and is stored at our facility. An inspection is possible by prior appointment.

Condition: used, Year of construction: 2023, An industrial automatic pocket setter including worktable and stand is offered for sale. Control system: Operation panel with display. Inspection possible by arrangement. Gksdpfx Aj Aih Eaecmed

Condition: used, Year of construction: 1992, Dahmen STEPPOMAT, quilting machine Multi-needle, 210 cm Type 084/11 Year of manufacture 1992 2 rows of needles Gkodpfx Acs Ahhhtemjd

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: BRP2014C04, type of input current: three-phase, input voltage: 400 V, input current: 24 A, compressed air connection: 6 bar, We offer this used Meevo MKF MKF BR 320 fabric cutting machine, year of construction 2014. Machine type: Textile Cutting Machine Year of manufacture: 2014 Voltage: 400 V Gksdpfx Acezg Tu Semjd Current: 24 A Pressure: 6 bar Frequency: 50 Hz Short-circuit current: 10 kA Weight: 1500 kg Number of phases: 3 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1988, machine/vehicle number: 112 009 00, Na sprzedaż sprawna maszyna przemysłowa renomowanej niemieckiej marki Ramisch Kleinewefers GmbH (rok prod. 1988, nr fabryczny: 112 009 00). W zestawie znajdują się dwa dodatkowe, duże wałki (cylindry) na zmianę/wymianę, co pozwala na dostosowanie maszyny do różnych procesów i materiałów. Stan techniczny: Maszyna w pełni sprawna, w dobrym stanie, gotowa do pracy. W zestawie: Kalander + 2 kompletne wałki wymienne (np. o innej twardości, strukturze lub powłoce). Godpfx Acszz Iz Nomokd Zastosowanie: Przemysł tekstylny, wykończalnictwo tkanin, obróbka włóknin, gładzenie, prasowanie, embossing/tłoczenie lub przetwórstwo tworzyw sztucznych. Jakość: Solidna, ciężka, zachodnioniemiecka konstrukcja (Made in Western Germany).

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: CC41011401EJ, working width: 2,000 mm, cutting width (max.): 2,000 mm, cutting height (max.): 70 mm, Investronica CV040/070 automatic multi-ply cutting system, built February 2003 in Madrid. In working order. TECHNICAL DATA Manufacturer: Investronica Sistemas, Madrid (Spain) Model: CV040/070 Gkodpez Atvusfx Acmed Identification: LOOCC4.100V000.B0 Serial number: CC41011401EJ Date of manufacture: February 2003 Useful cutting width: 2,000 mm Cutting height: 70 mm compressed fabric Cutting window: 2,200 mm, continuous length with conveyor belt Vacuum system: high-efficiency vacuum generation, integrated module Feed: automatic advance system Sharpening: automatic blade sharpener on the cutting head Blade speed: variable control Table: evacuation table with conveyor belt Approximate weight: 3,000 - 4,000 kg, to be confirmed on dismantling EQUIPMENT INCLUDED 1. Investronica CV040/070 automatic cutting table with cutting head, blade sharpener, integrated vacuum module and evacuation table with conveyor belt. 2. Control station built into the machine, with monitor, keyboard and computer. 3. Investronica P2000 pattern plotter. The machine is installed and running in Seville. It can be seen and tested in operation by appointment. Machine owned by the seller, free of encumbrances.

Condition: good (used), Year of construction: 2024, functionality: fully functional, Manufacturer: Pony Model: KITE Type: Shirt finishing machine Gkedpjz Ibdujfx Acmod Year of manufacture: 2024 Used, with minor signs of wear, in good condition (the fabric of the dummy attachment has a small tear on the left side) Without power plug From a business liquidation Technical data according to the manufacturer: With air blast technology for ironing dress shirts, women's blouses, and polo shirts Steam-heated SMALL dummy attachment Shirt tensioning slide, photocell for automatic positioning Automatic device for lateral tensioning of the shirt Semi-automatic front pressing bar, with pneumatic closure Two sleeve tensioning clamps, height-adjustable by gas spring Anatomical attachment of the sleeve in an oval shape, suitable for long and short sleeves Hot air recovery system Touch screen - PLC control for storing programs, diagnostics & programmed maintenance Adjustable feet Mirror Electrically heated 400V/50Hz connection Fan motor: 1.5 kW Extraction motor: 0.25 kW Dimensions (W x D x H): approx. 198 x 126 x 230 cm Weight: 360 kg Accessories: electric ironing unit Inspection or collection is possible by appointment.

Condition: excellent (used), machine/vehicle number: MFG-Serien-Nr.: E 45 10005, overall weight: 51 kg, Single-head embroidery machine with 6 needles (6 colors) with table/frame: 87 x 690 mm. Accessories: large frame, clamp frame, and table/frame. Godpfs Ahq S Asx Acmekd

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, working width: 2,000 mm, cutting width (max.): 2,000 mm, cutting height (max.): 200 mm, compressed air connection: 6 bar, Bullmer fabric spreading machine Eco2, including a 6-meter conveyor table. Gkedpfx Acsz Apz Hsmsd The machine is located in the Münsterland region.

Condition: excellent (used), Year of construction: 2017, operating hours: 6,100 h, Used Lectra Vector VT-FA-iQ50-71 automatic cutting machine, year 2017, effective cutting width: 180 cm, maximum thickness: 5 cm, operating hours: 6100, with traversing table. The machine does not have a software license, so it is necessary to contact Lectra to obtain a new software license and training. The machine is in excellent condition. Gkjdez D Nkbepfx Acmod

Year of construction: 2003, condition: excellent (used), functionality: fully functional, Manufactured in 2003, this machine remains in excellent technical condition thanks to proper maintenance and care. It offers a versatile configuration with a working width of 1,900 mm. The line is equipped with: • Raw material unwinding stations • J-box for face materials • Powder scattering unit • IR heating station • Lamination head • Cooling system • Tension control system • Central winding unit Gsdpfx Ajz E S H Iscmjkd A key feature is the additional upper pressing roller, which enables the production of 3-ply laminated composites in a single pass. Depending on the application, the machine can bond layers using thermoplastic adhesive supplied in roll form, thermoplastic powder, or a combination of both.