Condition: new, Year of construction: 2025, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Gsdpew Sgnkofx Aayekf Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: like new (used), Automatic pressing line (short cycle), useful to apply veneer, paper or laminates, composed of: V03022) Loader (Portal) "SAG" Double-station (of pick-up) with central motorized rollers table V03023) Brushing machine (to top and bottom clean the panels) "POLIMA"  V03024) Glue Spreader "OMMA" V03025) Motorized Conveyoring Disks way "OMMA" V03026) Preparing table for the panels and motorized in-feed carpet to the press "SIMI" Godpfx Aaodun Nisyokf V03027) Short cycle hot hydraulic Press "SIMI IMPIANTI" mm 1400 x 4500, with No. 10 pressing cylinders V03028) Unloader-stacker (Portal) "SAG" Double-station (of storage) with central motorized rollers table

Condition: good (used), Code: 0262 Brand: ITALPRESSE Model: UT 6/P - CE Standard Hydraulic hot press with electric boiler using diathermic oil for carpentry, furniture, custom-made furnishings, doors, window frames, panels, composite materials and various - CE Standard Technical data: Assembled steel platen dimensions: mm 2500 x 1300 Intermediate table Opening 400 mm N° 6 pistons Gkodpjx E Axgjfx Aayef Thrust 90 ton Diathermic oil heating by electric boiler Two-hand control for closing the press Timer Perimeter safety emergency rope Overall dimensions mm 3200 x 1700 x 1950 h Weight kg 3300

Condition: used, Year of construction: 1996, Press area: 3000 mm x 2100 mm Pressing depth: Vertical pressing elements: 5 Pressure build-up: manual hydraulic Pressing pressure: Cylinder stroke: approx. 100 mm Gsdpfswv Ncmsx Aayskf Machine length: 3000 mm Machine width: 800 mm Machine height: 2500 mm Weight: 2000 kg

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 17367 / 15 / M, Truss manufacturing line with motorized roller table and motorized stacking trolley for automatic stacking with lifting arm To be dismantled on site Press: M115A, 20m table Ejectors Details in photo Automatic truss stacker with lifter: 1 truss driver inside the workshop between the press table and the wall on the evacuation side Gkjdpjx Evvlsfx Aayof Ability to process 3 truss thicknesses: 36-72 and 108mm, spacing adjustment by pneumatic cylinders using a switch on the control panel. 1 Outside: 1 motorized roller conveyor table 4m x 10m 1 motorized trolley for automated stacking 2 receiving trolleys with fold-down backs to facilitate the removal of truss bundles.

Condition: used, Veneer press continuous press gluing press plate press Bürkle HSO 240/D 340/140 Press dimensions: 3400x1400mm Max discharge pressure 240T Max pressing pressure 6 kg/cm² Cylinders 8 pcs. with diameter 110mm Stroke 150mm Solid plates 40mm Water heated with boiler up to 60 degrees. Plates can be heated up to 150 degrees with the right boiler. Press dimensions: 2500x3900xH2800mm, 8500kg Input conveyor dimensions: 2200x3600mm, 500kg Documentation still available, first owner! Sold as one unit including conveyor belts - Documentation available: No - CE certificate present: No - Max. workpiece length [mm]: 3400 - Max. workpiece width [mm]: 1400 - Material of press plates: Steel - Number of cylinders [pcs]: 8 - Total working pressure [ton]: 240 - Working pressure [kg/cm²]: 6 - Heating type: Water heated - Max. working temperature [°C]: 150 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gjdpfxswng Tys Aayekf Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2025, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Gedpfx Astnz Ttsayekf Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: excellent (used), Through-feed System (of the furniture cabinets) Mechanical pressing system (with asynchronous motors + inverter) Self-centering system Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) mm 4500 Adjustable feeding speed (m/min ) 10-40 Gkodsgz Acajpfx Aayof Total lenght of the Press Clamp (mm) 4500 Movable vertical pusher and Movable horizontal pusher SIZE of FURNITURE CABINETS: Minimum lenght of the furniture cabinet (mm) 250 Maximum lenght of the furniture cabinet (mm) 2500 Minimum depth (Width) of the furniture cabinet (mm) 200 Maximum depth (Width) of the furniture cabinet (mm) 700 Minimun height of the furniture cabinet (mm) 250 Maximum height of the furniture cabinet (mm) 1200 Motorized in-feed carpet to the Press Clamp Length of the carpet in feeding to the Press Clamp (mm) 2500 Electronic programmer PLC (Separate electric and command cabinet) Total installed power (Kw) 7 Stapling Gun E/S 250 (Automatic)

Condition: good (used), Year of construction: 2000, machine/vehicle number: 2000 53, total length: 3,300 mm, Equipment: hot water, Sergiani 10-deck press Gkjdpex Ezkzefx Aayof continuously maintained and in operation With this press, doors can be loaded one after the other while the pressure on the doors in the other compartments is kept constant.

Condition: used, Year of construction: 1976, pressing area: 2500mm x 1250mm opening: 360mm heating plate top: elektric heating plate bottom: defective Godpjx Edl Ejfx Aayjkf plate surface: ALU - anodized pressure: 90t number of cylinder: 4 electricity: ca. 33A machine length: 3000 mm machine width: 1500mm weight: 4000kg

Condition: like new (used), functionality: fully functional, power: 110 kW (149.56 HP), Complete Refurbished Amandus Kahl C35-780 Pellet Press. The C35-780 pellet press itself has been recently refurbished with a full documentation of the all the new parts available, with one of them included in the pictures. The pellet press has been refurbished in 2024. The production line includes: - Amandus Kahl C35-780 Pellet Press with hydraulic nut - The Pellet Press has a new 110 KW engine - Electrical cabinet with emergency stop including complete electrical documentation - 4 additional die's of 6 mm - 60 liters of extra synthetic oil List of refurbished parts: - 7 new bearings Gedpfx Ajxykzpoayskf - 2 new wear rings - 1 new air filter - 2 new oil seals - 1 new oilfilter - 1 new oil pump - 20 liters of 800/460 Syntethic Oil - 1 New Pressure Piece Main Shaft

Condition: excellent (used), Year of construction: 2021, CATALOG NUMBER 7852 Gkjdpfxox Hhzvj Aaysf Technical specifications: - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 60 mm - Hopper diameter: 1000 mm - Throughput: approx. 110 kg/h - Automatic machine operation - Oil cooler - Motor: 7.5 kW - Dimensions (L/W/H): 1800x1100x1500 mm - Weight: 730 kg ADVANTAGES – Unpainted – Italian manufacture – Used briquetting machine – Perfect condition, year of production: 2021 Net price: 46,900 PLN Net price: 11,170 EUR Net price calculated at a rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg Gkjdpsiidm Njfx Aaysf - immediately available -

Condition: excellent (used), MEMBRANE PRESS For overlaying MDF shaped workpieces with PVC, PP and PET With VARIOPIN system Double Automatic front loading/unloading and preparation table (1500 x 2800 mm tray) Max pressure 2,400 KN Gkjdpfxsrwxz Re Aaysf Working pressure 320 BAR Dimensions of the Platens tables mm 1500 x 2800 Useful working dimensions mm 1250 (or 2 x 600) x 2550 Front loading side from mm 1500 (useful width mm 1250) Separate electrical cabinet and controls ( Electronic Programmer SIEMENS SIMATIC Panel Touch Total Installed power KW 50 ca. OPTION: "Paternoster" reels Store (magazine) Unwinder (reels holder) with coating sheet cutting system

Condition: good (used), Code: 0037 Brand: OMC - ITALY Model: PL/CONVERSION-S - CE Standard Gksdpfsv Ab Dwox Aaysf Membrane press with loading on the front side - CE Standard Multifunctional air membrane press, allows extreme versatility in one machine only of all types of finishing of the panel It can be operated as: Cold press Hot press Membrane press for Pvc coating or veneer of shaped panels form one side only Membrane press for Pvc coating or veneer of indentations in the wood Technical data: Work platens dimensions 2500 x 1300 mm Perforated steel platens Useful tank dimensions 2350 x 1180 x 50 mm N° 10 pistons - stroke mm 400 Pressure kg/cm2 6.5 Overall dimensions mm 3200 x 1800 x 2700 Weight kg 8000

Condition: used, Year of construction: 1982, Press dimensions: 3500 x 2600 mm Electrohydraulic unit for 4 hinge cup drillings, complete, 4 hinge cup drilling units Left upper corner plate with 2 cross pressure cylinders 4x hydraulic wood holders Intermediate inserts for small pressing with drilling unit Central pressure beam 2600 mm Longitudinal pressure cylinder with counterholder 4x hinge cup drills Storage location: At customer site Gkodpfxoxftcas Aayef

Condition: new, Year of construction: 2024, Weima Briquetting Press TH 714 The TH 714 machines are designed for plants with required throughput rates of up to 150 kg/h. The stable press housing enables the production of high-strength briquettes - from materials such as wood, polystyrene, foams, light metals, paper or biomass. Numerous additional options can be implemented, e.g. oil cooling for multi-shift operation. All machines are available as left- or right-hand version. Mounting on a stable base frame ensures fast installation and makes mobile use possible. User-friendly operation thanks to Siemens PLC control In order to live up to our performance promise, we design and produce all control cabinets ourselves at our Ilsfeld site and equip them with well-known international components. This guarantees highest quality with compact design. The used PLC-control from Siemens is perfectly adapted to the requirements of the briquetting process. Impurity-resistant screw conveyor due to cardanic suspension Gkjdpfjil Hggsx Aayof The screw conveyor, which transports the material into the pre-compressor of the briquetting press, is suspended on a cardan joint. This prevents interfering materials from causing damage to the screw conveyor. As is so often the case, however, it always depends on the specific application which suspension is chosen. For metal applications, for example, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil quantity (liters): 250 Weight (approx. kg): 1100 Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: excellent (used), A) Furniture Carcasse (Case) Continous Press Clamp (with CNC) "LIGMATECH" Mod. MDE 110/28/08 - Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) - Adjustable feeding speed m/min 12-40 - CNC Power Control 22 T - Total installed power Kw 14 - Total length of the machine mm 6220 Machine ables to process furniture cabinets (corpus) with dimensions: - Min/Max Length (Min/Max): mm 250 /2800 - Min/Max Depth - Width (Min/Max): mm 120 /800 - Min/Max Height (Min/Max): mm 280 /1320 Gkodolkbn Iepfx Aayof B) Motorized transport carpet Mod. MTB 200/20/08 (length mm 2000) C) Motorized transport carpet Mod. MTB 200/20/08 (length mm 2000)

Year of construction: 2025, condition: as good as new (ex-display), Vacuum membrane press VPR-3500 is a universal Press for the wood processing and thermoforming. The VPR-3500 press is also adjustable and mobile. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components Vakkumsystem: work surface with vacuum channels for a uniform Unterdruckauch for large workpieces. Becker Vakkumpumpe / oil free / tank capacity 100 l Godpfxodvldaj Aayjkf Work surface: 3500x1500mm Pump output: KW 0.75 Vacuum pump flow rate: 40 m3/h Rubber membrane Dimensions exterior: 3600 x 1650 x 1000 mm Weight: 400 kg Location: Off the shelf 54634 Bitburg -free load-

Year of construction: 2025, condition: as good as new (ex-display), Vacuum - membrane press VP - series are the ideal solution for the wood processing industry. VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive so that the performance is higher. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Gkodpfxodvltys Aayef Wood bending: Production of bent and glued components The heating system is equipped with temperature control Rubber membrane 2.5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of vacuum / Tankinhalr 15 l Work surface: 3000x1500mm Heating system temperature: Max 60 degrees C Heating system: KW 4,5 Pump output: KW 0.75 Vacuum pump capacity: 25 m3/h Rubber membrane Dimensions exterior: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Off the shelf 54634 Bitburg -free load-

Condition: new, Year of construction: 2024, your benefits Sturdy press mechanism with low-wear, chrome-plated tongs Pressing chamber wear bush Pre-compressor with end-position-sensed cylinder and screwed cover Control box with SPS-control Screw channel with discharge screw Separate oil tank with pump motor and valve control Safety switch for oil temperature Mounting on stable base frame with rubber feet Briquette quantity monitoring Robust construction, low-maintenance technology, little space requirement: The machines of the C-series are particularly suitable for small and medium-size enterprises, whose required throughput does not exceed 50-80 kg/h or 200 to 400 kg/day. Practically any suitable material can be briquetted, e.g. wood, polystyrene, foam, paper or biomass. All machines are available as left- or right-hand version. The mounting on a stable base frame ensures a quick installation and makes mobile use possible. Briquette diameter (mm) 50 Throughput capacity up to (kg/h) 50 (depending on material) Hydraulic motor (kW) 5,5o Gsdpfx Aajcnz U Eeyekf Screw motor (kW) 0,55 Oil quantity (litres) 100 Weight (kg approx.) 800 Outstanding features at a glance Hydraulics with separate oil tank: temperature-controlled hydraulic unit, complete valve control, pump motor for long running times Briquette length monitoring: regulates the length of the briquette to a constant level Pressing area wear bush: Prevents wear in the pressing area Location: Ex works - free loading

Condition: excellent (used), Year of construction: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control system - Electric heating platens 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs. - Number of levels: 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-around loading possible - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW Gkodjxgbxfspfx Aayjf - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V, 50 Hz - Safety specifications according to CE standard Standard equipment: - Movement of the press table with rack-and-pinion and parallel guides at 2 corners of the press table made from self-lubricating material - Electronic control unit with touch screen for machine control and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for adjusting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Safety pull cord - Safety support for lower press table Accessories included: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Ex stock - Immediately available -

Condition: new, Year of construction: 2024, Compact design, high reliability and an excellent price-performance price-performance ratio: these are the advantages of this machine machine, which is perfectly suitable for briquetting materials such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a sturdy base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm hopper height: 1010 mm hopper capacity: 1,1 m³ driving power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Gedpfebtnf Esx Aayekf Hydraulic oil capacity (l) 100 Weight (kg) 530 Equipment: Press Powerful press mechanism with low-wear, chrome plated tongs Precompressor with end-position-suspended cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Tank with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette quantity monitoring Automatic On - Off Location: 54634 Bitburg

Year of construction: 2025, condition: as good as new (ex-display), Vacuum - membrane press VP - Series are the optimal solution for woodworking. VP 3000 is equipped with the heating technology, which shortens the drying time of the glue, so that the efficiency is higher. Possible applications: Veneer / form gluing / wrapping... Coating of different profiles (veneer,paper, plastic...) Wood bending: production of bent and layer-glued components The heating system is equipped with temperature control Rubber membrane 2,5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h Gjdpfx Aaedwh E Asyekf The control system of the vacuum / tank capacity 15 l working area: 3000x1500mm Heating system temperature: Max. 60 degrees C heating system: KW 4,5 Pump capacity: KW 0,75 Vacuum pump flow rate: 25 m3/h Rubber membrane Dimensions outside: 3100 x 1650 x 1600 mm Weight: 450 kg Machine is equipped with a chassis. Location: From warehouse 54634 Bitburg - free on truck -

Condition: like new (used), Year of construction: 2025, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Gjdpfx Aastnz Hboyskf Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg