Membrane presses Orma PM/AIR 23/09 1999

Orma PM/AIR 23/09

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Wemhöner VARIOPRESS Vacuum Membrane Press Basic 1000 S Technical Specifications: Heating platen size (mm): 2850 x 1550 Electric heating platen design: Aluminum, top heating platen Total pressing force (kN): 2400 Max. chamber pressure (bar): 6 Max. operating temperature: 180 degrees Celsius Max. batch or workpiece size (mm): approx. 2460 x 1180 Thermoplastic film in roll form: Film width: approx. 1430 mm Film thickness (mm): approx. 0.25 - 1 Pressure chamber height (mm): max. up to 180 Hnjdpfxjv Np H Hs Agcjk Connected loads: Installed power (kW): approx. 46 Required air pressure (bar): approx. 8

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, The STUDER S242 is a versatile hard-fine machining center for grinding, turning, and milling operations on medium-sized workpieces. It is ideal for complete machining in a single setup – from external and internal grinding to hard turning and drilling/milling with driven tools. With the Studer S242, workpieces in the rotational sector can be finished to very high precision. Thanks to integrated automation, this machine is suitable for both single-part and series production. The S242 is also equipped with a VDI turret featuring driven tools. Center distance: 800 mm Swing diameter: 180 mm Max. workpiece weight: 60 kg X-axis: travel 220 mm, resolution 0.00001 mm Z-axis: travel 1,600 mm, resolution 0.00001 mm Grinding spindle: 6.8 kW, grinding wheel Ø 400 x 50 mm, automatic balancing Workpiece spindle head: AC synchronous spindle motor 10.5 kW, up to 7,500 rpm Tailstock variants: quill tailstock with integrated position measuring system Machine bed: Mineral cast Granitan® S103 for excellent damping and thermal stability Software & Control: Fanuc 31i-A control with 15" touchscreen Dialog language: German for StuderWIN Integrated measuring control with Renishaw LP2 touch probe, switchable to the turret Special features & advantages: Complete machining in a single setup → reduced main and secondary times High dimensional accuracy and surface quality due to Granitan® machine bed Short changeover times, suitable for everything from single-part to large-series production Flexible clamping system and modular tool configuration High process reliability thanks to integrated measuring and sensor systems Hnjdew Hqm Iopfx Agcjk Dimensions & Weight: Total weight: 12,000 kg Connected load: 45 kVA Compressed air requirement: min. 5.5 bar

Condition: used, Year of construction: 2005, CNC Machining Center HARDINGE BRIDGEPORT XP610 (Year 2005) Condition: Good, technically sound. Manufacturer: Hardinge / Bridgeport (USA / UK) Model: XP610 Year of manufacture: 2005 A compact and reliable CNC vertical machining center designed for precise milling, drilling, and tapping of metal parts. The Bridgeport XP series is known for its high accuracy, robust construction, and reliable control system, making it an excellent solution for manufacturing processes where precision and repeatability are crucial. Main technical specifications: (according to Hardinge Bridgeport XP610 model specifications) Control system: Heidenhain iTNC 530 Travel (X / Y / Z): 610 × 510 × 510 mm Table size: 800 × 520 mm Max. table load: 500 kg Spindle speed: up to 10,000 rpm Spindle taper: BT40 Tool changer: 20 positions (automatic) Spindle motor: 11–15 kW Cooling: integrated coolant system Power supply: 400 V / 50 Hz Machine weight: approx. 6,000 kg Hnodjxqp Enjpfx Agcsk Application: The Hardinge Bridgeport XP610 is designed for precision machining of components and parts: - Metal, aluminum, copper, and brass workpieces - Tool and die manufacturing - Production of mechanical components and industrial parts Suitable for both small batch and series production where a precise, stable, and repeatable result is required. If you have any further questions, please feel free to contact us.

Condition: new, Semi-automated nailing machine for pallet legs. How does it work? The magazines are manually fed with blocks and boards where after the machine automatically nails the parts together. The machine is equipped with three channels for blocks and a magazine for boards. Easily adjustable It’s easy to produce various types of pallet legs with OM-1000. The machine has three channels for inserting blocks. The cassettes in the channels are changed in order to fit the size of the blocks. The cassettes are easy and fast to readjust. Mychrome has various additional machinery that can easily be docked on to existing machines in order to build a longer line where more stages can be automated. The possibility to modify the design and the size of the pallets is still available with the additional machinery. Asssembled leg size: Min / max length: 600 mm - 1 600 mm Width min / max: 16 mm - 150 mm Leg boards: Min / max length: 600 mm - 1 600 mm Width min / max: 75 mm - 150 mm Thickness: 16mm - 28mm Blocks: Material: Solid wood or pressed blocks Dimension: 70 -100mm Width: 75 -150mm Specifications Operators | 1 Length 2,0 m Width 2,5 m excluding platform ladder Height 3,6 m Power Electric: 6 kW, 3x400 V+N, Hydraulic: 15 kW, 3x400 V+N Pneumatic system 7 bar compressed dried air: 300 L/min Should be filled and controlled Container for lubricating oil Machine capacity 12 legs/min Hsdpfewdutaex Agcenk Standard equipment 3 channels with motorized adjustment 3 cassettes, manually adjustable for block sizes 1 cassette, manually adjustable for board length Operators terminal for production control Program for saving nail positioning Nailing system Electric or hydraulic beam nailing 1 nail box (9 nails) 9 nailing hammerheads Individual nail picking nail indication system Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 The space-saving, swiveling vacuum press with a pressing area of 3500 mm x 1420 mm. Technical standard equipment of the vacuum press: Unless otherwise agreed, the vacuum press is delivered powder-coated in RAL 7012 and RAL 7035. Use of special colours is possible but must be agreed in advance and may incur additional charges. Welded table frame designed for professional use, mounted on a swiveling trolley, stands on 4 swivel castors, surface load capacity 150 kg. When not in use, the machine can be swiveled and locked into a space-saving position, reducing its depth to just 800 mm. The table surface consists of a 22 mm thick HPL/MDF board, covered in the pressing area with a slotted vacuum distributor plate made of MDF. Membrane frame opening is assisted by 2 gas struts mounted on the sides of the machine. The installed membrane is made of natural rubber, 2 mm thick, 780% elongation at break, and heat resistance up to 70°C. The membrane is fixed using a clamping system for efficient membrane changes. The continuous sealing of the pressing chamber is ensured by a sealing profile in the membrane frame. Oil-lubricated vacuum pump with 40 m³/h suction capacity and two vacuum tanks with a total capacity of 200 liters. Press chamber evacuation and ventilation is controlled via a 3-way ball valve at the front of the machine. The machine is delivered pre-assembled on a pallet. Please note that unloading requires a forklift with sufficient lifting capacity and fork length. You can also book initial setup and a brief instruction session by one of our technicians. If required, we will be happy to provide you with a separate quote for this service. Summary of key specifications: - Welded frame construction - Highly flexible natural rubber membrane, thickness: 2 mm, elongation at break: 780%, excellent recovery properties, suitable for temperatures up to 70°C - Vacuum distributor plate made of MDF - Digital vacuum control VAK-CONTROL 1 with automatic shut-off - Vacuum pump: 40 m³/h, oil-lubricated - Max. vacuum: -0.99 bar - Max. pressing pressure up to 9.9 t/m² - Power supply: 1.40 kW (400 Volt) - Vacuum tank: 200 liters - 4 swivel castors with brakes - Additional 13 mm vacuum connection - Pressing area: 3500 x 1420 mm Hnsdpfsywpt Iex Agcok - Table height to vacuum distributor plate: approx. 895 mm - Machine height closed: approx. 960 mm - Machine height closed with cover plate: approx. 1030 mm - Setup dimensions, operational: 3790 x 1700 x 2150 mm (LxWxH) - Setup dimensions, swiveled: 3790 x 800 x 1750 mm (LxWxH) Commodity code: 84659400 Net weight: 570 kg Gross weight: 660 kg Availability: April/May 2026 Location: Flörsheim

Condition: used, Year of construction: 2005, functionality: fully functional, Manufacturer: Hardinge / Bridgeport (USA / UK) Model: XP1000 Year of Manufacture: 2005 Reliable and efficient CNC vertical machining center designed for milling, drilling, and tapping a wide range of metal components. The Bridgeport XP series is renowned for its robust construction, high precision, and fast processing capabilities, making it ideal for both job shop and series production. Main technical specifications: (based on Hardinge Bridgeport XP1000 specification) Control: Heidenhain iTNC 530 Travel: X = 1020 mm / Y = 510 mm / Z = 635 mm Table size: 1200 × 520 mm Max. table load: 700 kg Spindle speed: up to 10,000 rpm Spindle taper: BT40 Tool changer: 20 positions (automatic) Spindle motor: 15 kW Machine weight: approx. 7,000 kg Power supply: 400 V / 50 Hz Cooling system: integrated Application: The Hardinge Bridgeport XP1000 is designed for precision metalworking—milling, drilling, tapping, and contour machining. Ideally suited for: - Tool, mold, and component manufacturing Hjdpfxexqpruj Agconk - Automotive, equipment, and industrial sectors - Situations requiring accuracy, reliability, and consistent performance If you have any further questions, we will be happy to assist you.

Year of construction: 1986, condition: ready for operation (used), OFFERED FOR SALE DUE TO OVERCOMPLETION: Well maintained second hand hydraulic press brake, brand LVD, equipped with front support Model PPN 125/4000 S630 Built in 1986 TECHNICAL CHARACTERISTICS Max. pressure force 1250kN Max. oil pressure 310bar Max. working length 4000mm Max. passage between the uprights 3150mm Max. stroke of the ram 150mm Distance table / ram 350mm Unloading 250mm Width of table 180mm Closing speed 90mm/s Working speed 7mm/s Return speed 55mm/s Motor power 10kW Approximate weight 13500kg Steered axes Y1,Y2,X STURING CNC TOUCH S-630 (New 2019) Very user-friendly Full touch screen (10") control with 2D graphic simulation Hnodpfxjr Ezv Us Agcok controlled axes: Y,X,R cnc backgauge X-duo - R back gauge with 2 movable fingers ADDITIONAL TOOLS F10 H180 26° 7x508mm + 1x550mm in sections Multi-V M90 L4000mm Asking price excluding transport costs (for buyer). Note: only serious bids will be responded to!

Condition: used, Indumasch Variable Notcher 200H (used), hydraulic, 200 x 200 x 4 mm, with adjustable angle - for cutting corners in sheet metal, e.g. zinc, copper, aluminum, steel, etc. Capacity: 200 x 200 x 4 mm Variable angle adjustment Robust design with integrated hydraulic unit Hnjdekwcvaepfx Agcjk With sharpened and adjusted blades Will be technically tested before delivery, including sharp blades

Condition: used, Year of construction: 2005, CNC Horizontal Machining Center OKUMA MA-400H (Year 2005) Condition: Good, the machine is connected and can be seen in operation. Manufacturer: OKUMA Corporation (Japan) Model: MA-400H Year of manufacture: 2005 Scope of supply: Complete with Tsubakimoto / Mayfran Inc. chip conveyor and full assembly system. High-class CNC horizontal machining center designed for precise milling, drilling, and tapping of metal parts. An excellent choice for series production where performance, accuracy, and reliability are critical. Main technical specifications: (based on OKUMA MA-400H model specification) Control system: OKUMA OSP-E100H Working travel (X / Y / Z): 560 × 560 × 625 mm Hsdpfsxql Dasx Agcsnk Table: 400 × 400 mm (2-position pallet changer) Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm Max. table load: 400 kg Spindle speed: up to 15,000 rpm Spindle taper: BT40 Spindle motor: 15/11 kW Tool changer: 60 positions (automatic) Chip conveyor: Tsubakimoto / Mayfran Inc. – integrated Cooling: integrated cooling system Approximate weight: 11,000 kg Application: The OKUMA MA-400H is intended for the machining of medium and high-precision components in the automotive, mold, tooling, machine-building, and metal industries. Ideally suited for versatile machining – with automatic pallet changing, it enables operator-free production. If you have any further questions, please feel free to contact us.

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 50 cycles/minute; filling range: 1-120ml; accuracy: ±1%; tube diameter: 10-28 mm (one mould is required for each tube diameter); tube length: 50-180 mm; number of filling heads: 1; storage hopper capacity: 40L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 3.1kW; compressed air: 0.4-0.6MPa; machine dimensions: L1950xW750xH1850 mm; machine weight: 900kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Hnsdpfx Ajv Nldhegcsk