Used Mobile Car Press for sale (26,000)

Condition: used, System: Mobile chamber filter press, used Type: Netzsch Area of application: Sludge dewatering Commission No.: 040.087 Filter plate format: 1200x1200 Number of plates: approx. 95 Filter plates: PP Filter cloths: optionally available depending on the medium Filter area: approx. 230 m2 Press capacity: approx. 3400 dm3 Filter pressure: approx. 15 bar Year of construction: 1993 Length: approx. 16 m Width: approx. 3.25 m Height: approx. 2.97 m Application: Sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for the solid-liquid separation of suspensions. Klodpfx Anowf Uuaswju Purchase or rental: Rental or purchase. Inspections of the systems are available by appointment at our factory.

Condition: used, System: Chamber filter press mobile, used Type: Netzsch Application area: sludge dewatering Machine No.: 89040419 Klodpowqydkjfx Anwju Year of construction: 1994 Filter plate size: 1200x1200 Number of plates: approx. 100 Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 250 m2 Press volume: approx. 3540 dm3 Filter pressure: approx. 15 bar Washing system: No Conveyor technology: Conveyor belt underneath Discharge: Telescopic conveyor belt Kastner Polymer system: Alltech 3-chamber Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental: Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: refurbished (used), Chamber filter press with feed pump, cpl. new built in swap body or sea container, preferably 800 filter press with piston diaphragm pump, special requests can be considered Kljdpfjfbbqrsx Anwsu

Condition: new, Mobile pressing plant with belt or packing press - construction depends on output per hour Kljdpsb Nvffofx Anwju More detailed Information on request!

Year of construction: 2023, condition: new, Mobile complex for cleaning cars with ozone model Celette Trioxyclean, France. 6 units available. Fast and completely decompose harmful volatile organic compounds inside the car, such as formaldehyde, ammonia, benzene, TVOC (Total volatile organic compounds), etc., deodorize unpleasant smells of cigarette smoke, alcohol and food, effectively kill suspended bacteria and viruses, and protect passengers from cross infection. Ozone (O3) output: 5000mg/Hr Negative ion: 8 – 10 Million Ozone concentration: 15-25mg/L Sterilizer rate: 99.99% Cooling type: air-cooled Input Supply: 220/110 Volt | 50Hz/60Hz Weight: 37 KG Ksdeu Dpygjpfx Anwslu Dimension (L x W x H) cm: 55 x 40 x 126

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! 12x80 mm 105 mm CUTOFF 170 ppm YEAR 2002 Kodpfx Ansh Rkhnjwslu PERFECTLY WORKING AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Condition: new, PRICE: 5000 EUR Mobile lift for cutter cart Made of stainless steel Lifting weight: 200 kg Dimensions: 1160x800x2900mm Electrical power: 0.75kW Voltage: 220V 50Hz Klodpfx Asvtzzkenweu

Condition: used, functionality: fully functional, empty load weight: 1,750 kg, total length: 4,465 mm, Year of construction: 2023, construction height: 2,750 mm, construction width: 2,500 mm, Truck Condition: Ready for operation and fully functional Klodpfx Anex Alniswou Technical condition: New Description: Mobile tire press for tire fitting. Industrial tires up to 20 inches, all tools included. Road approval. Mobile tire press for tire fitting. Industrial tires up to 20 inches, all tools included. Road approval.

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 1729, functionality: fully functional, empty load weight: 10,000 kg, workpiece width (max.): 5,500 mm, workpiece height (max.): 980 mm, Equipment: CE marking, Submitting a bid obligates you to collect the item on time, no later than June 22, 2026! TECHNICAL DETAILS Workpiece width max.: 5,500 mm Workpiece height max.: 980 mm Number of working stations: 8 Number of cylinders per press level: 10 Number of clamping devices per press level: 10 MACHINE DETAILS Power of main motor: 1.5 kW Press drive: Hydraulic Dimensions & Weight Klodpfx Aoy Tviujnwou Dimensions (L x W x H): 8,000 x 2,200 x 2,450 mm Unladen weight: 10,000 kg Transport packages: 1 EQUIPMENT CE marking Separate press stages Motorized rotation 2 working stations per side

Condition: ready for operation (used), functionality: fully functional, mileage: 81,186 km, power: 185 kW (251.53 HP), first registration: 07/2010, fuel type: diesel, empty load weight: 9,174 kg, overall weight: 14,000 kg, axle configuration: 4x2, wheelbase: 4,350 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, Year of construction: 2010, operation weight: 9,174 kg, Equipment: ABS, differential lock, low noise, parking heater, tail-lift, trailer coupling, Truck Doka: - Iveco - Eurocargo 120E25 - EZ: 12.07.2010 - 6-cylinder 185kw diesel, 5880ccm, Euro 5 - 81.186km - Doka, 9-seater - 6-speed manual gearbox - Dif. lock - Unladen weight: 9,174 kg; permissible GG: 14,000kg - 800cm x 250cm x 366cm (lxwxh) - Wheelbase: 435cm - el. FH - el. mirrors - Digital tachograph - Radio/CD - Fog lights - Comfort driver's seat - cruise control Box body: - PALKIT - Case dimensions: 436cm x 250cm x 200cm (lxwxh) - Storage boxes left / right - Retractable sliding ladders right + rear Ksdpfjrz Nqlsx Anwelu Front part: - Folding bench seat - shelf installation - Parking heater - Window left - Door with window right rear part: - DHOLANDIA LBW, 1,000kg; 160cm - Ball-type trailer hitch (3,500kg) - Storage boxes / cupboards / lashing eyes - Workbench with vice - DUFLIS electro-hydraulic ladder rack / roof rack Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: new, Year of construction: 2025, machine/vehicle number: 332050066, Marini Carbon T-Box 160 mobile asphalt plant year: New capacity: up to 160 to./h. - container type Klsdpfehd I Upsx Anwou - aggregate hoppers: 4 - capacity of one hopper: 10 m3 - drying drum: counterflow - burner: 13 MW - 1 year guarantee - CE This offer is subject to change, input errors and mistakes. Valid are only the specific agreements in the order confirmation respectively in the sales contract. more machines and mixing plants on our website More information Use: construction, Usable material: asphalt, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: new, Year of construction: 2025, machine/vehicle number: 712520122, FRUMECAR ECA 3000 fully mobile concrete plant condition: NEW capacity: 120 m³/h mixer: Sicoma MAO mixer size: 3 m³ cement silos: 2x 55 to. guarantee: 1 year from startup Kledpfxohd Na Uj Anweu more machines and mixing plants on our website More information Use: construction, Usable material: concrete, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: ready for operation (used), Year of construction: 1994, Brand: HSM Model: 155 VL Year of construction: 1994 Pressing force: 157 kN Voltage: 400 Max. bale weight: 250 kg Klsdpfx Anszc Hhxswou Bale dimensions: 110 x 70 x 95 cm Machine weight: 950 kg Machine dimensions: 144 x 100 x 234 cm Feed opening dimensions: 110 x 59 cm

Year of construction: 2004, condition: good (used), Atlas Copco XAS 67 compressor 3.7 m3/min Number of hours: 2,371 h Kledpfxjiywpzj Anweu Deutz engine Type: diesel

Condition: excellent (used), Hess Corpus Press Type: Export, Pneumatic Manufacturer: Hess Type: Export Kjdpexgvwpjfx Anwelu Maximum workpiece size: 2,500 x 1,500 mm Press force: 1,400 kp pressing capacity per pressure unit at 15 bar Vertical cylinders: 2 + 2 pressure cylinders Horizontal cylinders: 2 + 2 pressure cylinders Dimensions: 3,900 mm x 2,500 mm x 600 mm Weight: 1,060 kg Hess Corpus Press Export, pneumatic 2 vertical pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar 2 horizontal pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar; the upper unit is easily adjustable thanks to weight compensation Pressing operation is controlled via 2 rotary slide valves with positions Press – Stop – Release Maintenance unit consisting of pressure regulator (0–15 bar), pressure gauge, and oil mist lubricator Anodized measuring scales, detachable feet Location: Ex works customer site - Immediately available -

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lamella – Carcase Press with Rapid Traverse Technical specifications: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm, depth 700 mm; - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with field-proven tolerance compensation for tightly pressed carcase joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressing beams is infinitely variable via two potentiometers and set electronically via frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressing beams: min. 500 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Pressing force for vertical pressing beams: min. 300 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Including option: Rapid traverse speed for quick positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. Sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressing beams, e.g., for low pressing forces, drawers, and carcases at 45 degrees. Easy operation via six separate push buttons, freely adjustable pressing time preselection with automatic opening feature, loading height 300 mm. The machine is available from our showroom and can be delivered immediately. Kodpfsy Egz Sox Anwslu Location: ex-stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate Kedpfx Anew Sgnkswelu - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available - Kodpfx Aeiidm Njnwslu

Condition: used, Dimensions: approximately 2500 x 1200 x 600 mm, semi-hydraulic, with electro-motorized adjustment of the press wall. Klsdpfezd Hm Nox Anwju Storage location: Nattheim.

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Kodpfxszaqyme Anwelu Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm × 65 cm Condition: very good! Video of the machine in operation available upon request. Transportation is also possible.

Condition: used, Year of construction: 2004, total length: 8,000 mm, total width: 2,200 mm, total height: 2,450 mm, Colour: White Empty weight: 10.000 kg Price: On request - Details: - └ Description: 2 work fields per side - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 1729 - Main motor power [kW]: 1.5 - Press drive: Hydraulic - Max. workpiece width [mm]: 5500 Klodpfxjy Nxv Ae Anwju - Max. workpiece height [mm]: 980 - Number of working fields [pcs]: 8 - Number of cylinders per press level [pcs]: 10 - Number of clamps per press level [pcs]: 10 - Options: Separate pressing levels, Motorized rotation - Transport dimensions: 8000mm x 2200mm x 2450mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam Kledpow Nafkefx Anwsu - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Storage location: Nattheim Kjdpfx Ansvvkl Djwolu

Condition: used, Year of construction: 1994, functionality: fully functional, total length: 2,500 mm, total width: 600 mm, total height: 1,350 mm, overall weight: 1,200 kg, We are offering this used Hess Korpus Express carcass press, manufactured in 1994, for sale. Year of manufacture: 1994 Weight: 1200 kg Dimensions Length: 2500 mm Dimensions Width: 600 mm Kledpozaku Dsfx Anwou Dimensions Height: 1350 mm The machine was in use at our facility until recently. It is currently being sold due to restructuring. If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2003, machine/vehicle number: 0-306-04-2737, working width: 800 mm, conveyor belt length: 4,800 mm, feed rate X-axis: 37 m/min, working height: 1,400 mm, working length: 2,300 mm, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! Kedpfjy Uwmqjx Anwelu TECHNICAL DETAILS Workpiece width max.: 800 mm Workpiece length max.: 2,300 mm Workpiece height max.: 1,400 mm Feed rate max.: 37 m/min MACHINE DETAILS Machine length: 4,800 mm EQUIPMENT Infeed conveyor Outfeed conveyor The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8536