Veneer press

Joos HP 120

Condition: used, Year of construction: 2024, Version: Joos A.B.S. safety system to protect the heating plates in case of incorrect loading or parts left behind. The press is open on all sides, features a robust all-steel construction, and is protected against overload. The maintenance-free hydraulic system is integrated into the oil tank. Step-less pressure adjustment is performed according to a clear pressure diagram. Once the set pressure is reached, the system switches off automatically. Constant pressure is maintained throughout the entire pressing process. The rack-and-pinion guide ensures stable parallel travel of the pressing plates. The press is optimally suited for laminating flat surfaces using adhesives, provided the corresponding technical requirements are met. Technical Data: - Max. pressing force: 1200 kN - Adjustment range: 10 – 100% - Total pressing area: 3100 x 1350 mm - Specific pressure at full capacity: 3.0 daN/cm² (kg/cm²) - 6 cylinders, 80 mm diameter, 400 mm stroke - Hydraulic working pressure: 398 bar - Press room height: 400 mm - Color: Light grey, RAL 7035 Hydraulics: The following components are integrated into the press's hydraulic system: - 1 oil-hydraulic two-stage high-pressure pump - 1 three-phase motor, 2.2 kW - 1 automatic pressure switch - 1 change-over valve - 1 pressure diagram The hydraulic unit is built into the lower section of the press. Controls: Automatic pressure control via electronic controller with setpoint and actual value display. Operation is performed via a clear control panel. The control cabinet is fully integrated lengthwise in the upper section of the press. Operating voltage: 400 V, 50 Hz, 3-phase. ELECTRIC HEATING PLATE 3100 x 1350, GOLD ANODIZED One lower and one upper electric heating plate, 3100 x 1350 mm. The surfaces are anodized, making them extremely hard, scratch- and abrasion-resistant. High-temperature insulation between the heating plate and the press table. Maximum operating temperature: 120°C. (1 section / 2 heating plates.) TEMPERATURE CONTROL Bedpfx Aoxplbcjgzswi Temperature control R 1.1; each heating plate features an electronic temperature controller and a safety temperature limiter around the edge of the heating plate. SWIVEL PANEL OPERATION Operation is via an ergonomic swivel panel control. Location: Rieth

Condition: new, Year of construction: 2024, Reduce retooling by 4-5 times with pneumatic auto-change and a tool height sensor! Convenience in operations. This CNC router machine can cut and engrave wood, MDF, chipboard, acrylic, plexiglass, PVC, composites, and aluminum. The Wattsan M3 1325 has an increased thickness of housing that allows it to work with heavy workpieces. It can manufacture parts for light industries, interior and exterior decorating, souvenirs, outdoor advertising, working with soft metals and stone, woodworking, and furniture production. You can give our managers a call for additional details! Wattsan M3 1325 characteristics Working area: 1300x2500 mm Bjdpfx Agsrywtqozowi Positioning precision: 0.03 mm Spindle: 7.5 kW Machine size: 1960x3350x1740 Weight: 830 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Year of construction: 1993, Häwa debarking milling machine H249 / 1000 Bwsdpfx Aox Rv T Ijgzsi Year of manufacture: 1993 Log diameter: 0.25 m - 1.2 m Log length: 1.8 m - 7 m Milling head: 30 kW Root reducer: 37 kW Consists of: - Cross infeed conveyor - Debarking - Conveyor belts - Outfeed conveyor

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW Bwjdpfewrp Emsx Agzoi - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Year of construction: 2008, condition: excellent (used), Oil burner Weishaupt WM-L10 Year :2008 Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Bsdpfxji Ap Ate Agzowi Loading possible

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Bsdjfxpbmspfx Agzjwi

Condition: excellent (used), total width: 1,300 mm, total length: 3,500 mm, overall weight: 7,000 kg, operating pressure: 300 bar, transport width: 1,600 mm, transport height: 2,350 mm, transport length: 4,350 mm, Simimpiantin Shelf Press for Veneering 3500×1300 Shelf length: 3500 mm Shelf width: 1300 mm Two loads Press with 8 cylinders Shelves heated with water from central heating Max. working pressure: 300 bar Bwedoxxpgbopfx Agzei Piston diameter: 80 mm Machine weight: 7000 kg Machine dimensions: 435×160×235 cm (H)

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 0 278 06 1192, film width: 700 mm, roll diameter: 700 mm, Used Friz rotary cutter. 1 set of blades has been resharpened. The machine is used and is sold without warranty. Bwjdsv Radxjpfx Agzei Inspection is possible and welcome. Loading facilities available.

Condition: used, Year of construction: 1990, No. 04502 Veneer press Ott JU 2511/70 Used, year of construction 1990 Electro-hydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm LW Heating electric Bedjxwp S Ispfx Agzowi 4 hydraulic cylinders each 80 mm diameter Total pressing pressure 70 tons Specific pressing pressure 2.5 - 3.5 kg/cm2 Opening width 400 mm Button control for opening - closing - stop Pressure monitoring with automatic readjustment Adjustable limit switch for specific opening width HAWE pump Safety rip cord Incl. electric cable and plug 32 A Incl. electric plans, operating instructions as .pdf file Transport dimensions approx. 2900 x 1400 x 2000 mm LWH Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: W230-028, pressing force: 80 t, warranty duration: 24 months, pressure: 250 bar, power: 45 kW (61.18 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. This is a baler HBC80 (45kW) with crosswires. At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. Bwjdpjtvat Tefx Agzei After refurbishment, this baler is sold with a 2-year warranty.