Used Manual Screw Press for sale (27,651)

Year of construction: 2006, condition: excellent (used), Punching capacity in sheets at 37 kg strength up to: 2 and 3 mm Pjdpfx Acjd D Ryfjvspp with various punching tools

Condition: used, Pressing screw REG-MAC Ppodsyvp Snopfx Acvsp for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Condition: not inspected (used), functionality: unexamined, table width: 350 mm, table length: 570 mm, wheel diameter: 1,250 mm, No minimum price – guaranteed sale to the highest bidder! Submitting an offer commits you to timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Flywheel diameter: 1,250 mm Table dimensions: 570 x 350 mm MACHINE DETAILS Dimensions & Weight Ppjdpfx Aoyr N T Aocvop Dimensions (L x W x H): 1,300 x 1,300 x 1,800 mm Machine weight: 600 kg External reference: Lot 80

Condition: used, nominal force 100 t stroke 320 mm no. of strokes 35 /min distance between columns 360 / 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm table surface area 320 x 450 mm table height over floor 660 mm ram surface 250 x 280 mm Ppjdpsvuk N Tefx Acvep spindle diameter 125 mm power capacity 3,0 kW weight 4,5 t Dimensions (WxDxH) 2,0 x 1,6 x 3,1 m only permitted for hot forming work high speed friction screw press with motor, friction screw drive as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1980, functionality: fully functional, Spindle press by Hiller & Lutz Year of manufacture: 1980 Fully functional In good used condition Technical details: The Hiller & Lutz HP71 is a classic, robust manual spindle press (also referred to as an arch press), widely used in metalworking shops, workshops, and industrial environments for straightening, bending, pressing-in, or punching operations. Here are the standard technical specifications for this model (values may vary slightly depending on year of manufacture): - Press force: approx. 20 to 25 tons (the "71" model number typically refers to frame size/width; actual force depends on spindle pitch and flywheel diameter) - Spindle diameter: approx. 70 – 80 mm - Stroke: approx. 200 – 300 mm (depending on spindle length) - Throat depth: approx. 250 – 300 mm (distance from spindle center to frame) - Table size: approx. 500 x 400 mm Ppsdpfswxyn Esx Acvep - Maximum opening height: approx. 400 – 500 mm (with spindle fully extended) - Flywheel diameter: approx. 1,000 – 1,200 mm Machine features: - Design: Heavy-duty C-frame made of cast iron for high rigidity - Drive: Manual operation via large flywheel; energy is generated through the wheel’s inertia during operation - Table: Usually features a central through-hole and T-slots for tool mounting - Weight: Net weight typically ranges from 700 kg to 950 kg, ensuring stable setup (usually requires bolting to the foundation) Machine dimensions (main body): - Height: approx. 1,800 mm to 2,100 mm (depending on spindle position) - Width (frame): approx. 500 – 600 mm - Depth (base): approx. 800 – 1,000 mm Additional note: Dimensions depend on whether only the machine body or the total required space including flywheel overhang is considered.

Condition: used, Manual spindle press - Maximum filling height: approx. 90 cm Ppedpfoymr Tzox Acvsp - Pressing area: 102 x 72 cm

Condition: used, Hand - swing bending machine KRAMER type AMS 650 x 1,5 Hand swivel bending machine, press brake year of construction approx. 1985 working length 650 mm sheet thickness at 40 kg/mm2 1,5 mm upper beam opening approx. 60 mm bending beam adjustment ca- 0-25 mm bending angle 0-180 - Upper beam adjustment via hand crank - pre-screw rail for the bending beam - one-piece sharpening rail 135° space requirement L x W x H 1200 x 600 x 1100 mm Pjdpjdzqaaefx Acvjpp weight 160 kg good condition

Condition: good (used), Year of construction: 1964, pressure 7 t weight 0,9 t 1417 Pjdpfx Aceqy Rn Tovopp

Condition: excellent (used), From 2019, 15 kW, with container PM 32-E (32 m3) Ppjdpfsyti Ipox Acvsp

Condition: good (used), Year of construction: 1974, Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press Podpfx Asigwdwecvspp -Manufacturer: Kalisz, manual screw press type YB-1 with solid base -Pressure: max. 10,000 kg -Stroke: 200mm -Intermediate size: 320 mm -Spindle holder: Ø 20 mm -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg

Condition: good (used), Year of construction: 1963, stroke = 250 mm Ppedpfx Aceydlxfsvop

Condition: used, Year of construction: 1962, nominal force 400 t stroke 140 - 400 mm no. of strokes 24 - 36 /min distance between columns 800 / 700 mm distance table/ram, max. stroke up, adjustment up 900 mm table surface area 700 x 700 mm ram surface 630 x 630 mm spindle diameter 220 mm power capacity 26,0 kW Pjdpfjvuud Usx Acvepp weight 18,5 t Dimensions (WxDxH) 1,85 x 2,5 x 4,3 m only permitted for warm forming work with gear drive, single impact / double impact device, impact regulation

Condition: used, Year of construction: 1973, Column Spindle Press Ageo Type 60-960 Ppjdpfx Acewtnigsvjp Important Information: – The stated price applies only to self-collection. – Dismantling, loading, and transport are the sole responsibility and expense of the buyer. – Sale is from used stock, without guarantee or warranty. Inspection possible by appointment. I am happy to answer further questions.

Condition: excellent (used), Year of construction: 1963, functionality: fully functional, pressing force: 28 t, manual spindle press 28 tons in very good condition Psdpsquqpaefx Acvjpp

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Farmet FL200 screw press for rapeseed/sunflower/soybean, with final geometry, in a really good condition. Psdpfxsxa Hy Us Acvjpp Motor 22kw, capacity 400kg/h (with prepress 500kg/h), lamels and geometry checked, and in a good shape. Paired with extruder Farmet FE500 (from our offer) it can process soybean at 400kg/h

Condition: used, Year of construction: 1970, pressure 1 t Stroke 315 mm Ppedpfxjv Td Erj Acvep

Condition: good (used), Year of construction: 1991, functionality: fully functional, - Normal pressure force kN (Mp) 160 (16) - Maximum achievable pressure kN (Mp) 200 (20) Ppodpovnbrxofx Acvep - Spindle diameter 60mm - Spindle pitch per revolution 32mm - Number of guide columns 2 - Clear width between columns 410mm - Max. clear installation height between table top and ram 270mm - Ram stroke 210mm

Condition: used, machine/vehicle number: J36860, National Machinery double-pressure press type M56, good condition, 3 pieces available Psdpfewiwpuox Acvopp

Condition: not inspected (used), functionality: unexamined, table width: 500 mm, table length: 650 mm, overall weight: 1,500 kg, wheel diameter: 2,000 mm, No reserve price - guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid commits you to timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Table dimensions: 650 mm x 500 mm Flywheel diameter: approx. 2,000 mm Pjdpfx Aexqnu Ujcvopp MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 mm x 2,000 mm x 2,100 mm Weight: 1,500 kg

Condition: not inspected (used), functionality: unexamined, table width: 390 mm, table length: 450 mm, overall weight: 700 kg, hole diameter: 90 mm, wheel diameter: 1,500 mm, No reserve price - guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid obligates timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Table dimensions: 450 x 390 mm Ppsdpfx Acoxqnrmjvsp Hole diameter: 90 mm Flywheel diameter: 1,500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,500 x 2,000 mm Weight: 700 kg

Condition: good (used), Manual spindle press 25 t - Clearance between columns: 400 mm - Spindle diameter: 80 mm - Vertical opening: 420 mm - Various clamping brackets Dimensions: LxWxH 1.2x0.8x2 meters / Weight 700 kg Ppjdpfx Ajx Haprocvep Subject to errors and omissions.

Condition: used, TECHNICAL DETAILS - Force : 5 [kN] - Working stroke : 35 [mm] - Spindle height : 400 [mm] - Slide bore diameter : ø 10H7 [mm] - Angle : 95 [°] - Max. tool weight : 15/30 [N] Podsuhallspfx Acvjpp - Table dimension : 110 x 80 [mm]

Condition: used, TECHNICAL DETAILS Same as on photos Psdpfxjuhaide Acvspp

Condition: used, TECHNICAL DETAILS Same as on photos Ppodpeuhaikjfx Acvsp

Condition: used, TECHNICAL DETAILS Pedpsuhaiqjfx Acvspp Same as on photos