Condition: reconditioned (used), Year of construction: 2011, Functionality: fully functional, turning length: 320 mm, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, overall weight: 3,500 kg, Equipment: rotational speed infinitely variable, Citizen M32-3M5, very good condition, machine partially overhauled Cobvowdrp Soqu Dasgt - All servo axis amplifiers replaced - Spindle bearings completely replaced - X2 slides re-scraped - Z2 guideways replaced - Geometry completely adjusted - Complete cleaning performed Number of tool stations on turret: 12 Number of servo axes: 8 (Z1/X1/Y1/X2/Z2/Y2/Z3/X3) Y-axis on the turret Part removal unit Including FMB Turbo 3-36 bar loading magazine Including Müller Combi Stream chip conveyor/high-pressure combo system Including Kraft and Bauer fire extinguishing system Including 10 driven tool holders and 10 tool holders for the turret 1-year warranty on the replaced components Delivery and commissioning on-site available upon request

Condition: ready for operation (used), Year of construction: 2002, operating hours: 55,004 h, Control Unit Brand FANUC Main Drive Number of axis 8 Media Cobewgf Aqevqu Daegt Chip conveyor Yes Additional Equipment ROBOBAR SSF automatic bar loader Motorized tools Main spindle and sub-spindle Tool holders Collets This 8-axis Tornos-Bechler Deco 20a was manufactured in 2002. A Swiss type turning machine featuring a max turning diameter of 20mm, equipped with a Fanuc control system, motorized tools, main and sub-spindle, and a ROBOBAR SSF automatic bar loader. Includes tool holders and collets. A great opportunity to buy this Tornos-Bechler Deco 20a Swiss type turning machine. Contact us for further details regarding this Swiss type turning machine. Application Types Turning

Condition: used, _____ Description: Year of manuf. : 2023 Control : Siemens SINUMERIK 828D Turning diam. : 560 mm Csbvqjwgg T Rsu Daogt Turning length : 1000 mm Mainspindle: Technology:belt-driven spindle Speed (max.):4500 rpm Power (max.):15 kW Bar capacity:65 mm Workpiece clamping:3-jaw chuck; Autogrip 3H-210 Tool carrier (X/Z): Technology:Turret with 12 stations (BMT-interface) Tool holder:BMT-interface Traverse path X / Z:200 / 1050 mm Rapid traverse X / Z:30 / 30 m/min Tailstock: Technology:programmable Travel:900mm Cone:MK5 Equipment/Accessory: Chip management:chip conveyor with chip bucket Coolant management:high-performance coolant system with coolant pump Raw material feed:bar feeder interface Set-up mode:electronic handwheel Lubrication management:automatic central lubrication Other equipment:work light; flushing gun

Condition: good (used), Year of construction: 2006, Functionality: unexamined, machine/vehicle number: 784, Machine Name - CMZ Machine Model - TL25 Y.O.M 2006 S.N 784 Description - Control Fanuc 31i Chuck size 250mm Swing 400mm 76mm spindle bore Max.turning diameter 676mm 12 Station turret Live tooling Sub spindle Swarf conveyor Tool setting probe Gantry loader Cgjbvqjv A Ey Asu Dajt Manuals

Condition: like new (used), Face plate, cast iron, RÖHM make Diameter: 500 mm Through: 90 mm Mounting: DIN 55027 / KK 6 including mounting bolt Cgsbvquowfylks Dajt Condition: very good, item appears to be unused, just dusty – sold as used! .

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 42 [mm] - Travel : 100 [mm] - Spindle speeds : 6000 [rpm] - Spindle power : 7.5/5.5 [kW] - C axis indexing precision : 0.001 [°] Cgebvqouhaflou Daet COUNTER-SPINDLE - Max. bar diameter : 34 [mm] - Spindle speeds : 5000 [rpm] - Spindle power : 5.5/3.7 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 2 UPPER TURRET - Number of positions : 8 - X stroke : 140 [mm] - Z stroke : 235 [mm] - Y stroke : 70 (+/-35) [mm] - Live tools speed : 5000 [rpm] - Live tools power : 1.0 [kW] LOWER TURRET - Number of positions : 6 - X/Z stroke : 140 / 310 [mm] POWER SUPPLY - Total installed power : 30 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.220 x 1.460 [mm] - Machine height : 1.700 [mm] - Machine weight : 3100 [kg] MACHINE HOURS - Number of working hours : 14540 [h] EQUIPMENT - CNC : Fanuc Oi-TD - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor - Bar loader : Top Automation FU342SX (2021) - Electric transformer

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, YANG ML15A CNC Lathe Year 1999 Cgobswcqwfjvqu Dast Conveyor Tailstock Visible under power, video available In good condition

Condition: ready for operation (used), Year of construction: 2004, General Data Machine weight 5500 Cjbvquswgf Awe Dasgt Workpiece Workpiece drm 15 mm Workpiece X 300 mm This EUBAMA S8 rotary transfer machine was manufactured in 2004. It handles parts up to 15 mm in diameter and approximately 300 mm in length. It operates on a 24 V control voltage and requires a 400 V, 50 Hz electrical connection. Weighing a maximum of 5.5 tons, the EUBAMA S8 machine we have for sale is robust and reliable. Contact us for further details regarding this rotary transfer machine. Application Types Turning

Condition: good (used), Lot of toolholders and other equipement. Csbvqu Djwfg Dtoasgt

Condition: good (used), We are offering an exceptionally good precision lathe. This machine is arguably the best German lathe ever built in this class. BOHEHRINGER Precision Lathe Model DUE 400 Year of manufacture: approx. 1983 Cjbvqewfgrqeu Dajgt Center height: 200 mm Swing over bed: 400 mm Swing over cross slide: 205 mm Width between centers: approx. 1,200 mm Effective turning length: approx. 1,000 mm Bar capacity: 62 mm Spindle head: DIN 55027 size 6 Drive power: 11 kW Max. torque: 2,000 Nm 24 speeds: 11.2 – 2,240 rpm 60 cross feeds: 0.03 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Tailstock quill stroke: 190 mm Tailstock taper: MT 5 Space required: LxW approx. 3,500 x 1,525 mm Weight: approx. 3,850 kg Accessories: HEIDENHAIN 2-axis digital readout Coolant system; Large chip protection rear panel, 200 mm T lathe chuck; Roller conveyor cover for the lead screw support to the bed; Multifix C base holder including 1 holder; Operating instructions; Circuit diagram; Rapid traverse in the longitudinal and cross support Condition: The machine is in good technical condition. Backlash in the cross slide approx. 0.2 mm and top slide approx. 0.15 mm Spindle taper concentricity approx. 0.006 mm Machine bed geometry: Deviation approx. 0.01 mm over a bed length of approx. 750 mm (Measured on the flat track guide with a dial indicator towards the lathe chuck) The following parts were replaced: - Oil change - Cooling fabric hose Price net, ex works. Delivery with the company's own truck is available for an additional charge.

Condition: excellent (used), Passage: 120 mm Mounting: DIN 55027 / KK 8 Diameter 625 mm Cgjbvswfyk Hequ Dajt

Condition: excellent (used), Year of construction: 2020, operating hours: 11,400 h, Functionality: fully functional, Technical Specifications: Max. workpiece diameter: 32 mm Max. workpiece length: 240 mm Main spindle: Max. speed range: 8,500 rpm Drive power: 7.5 / 5.5 kW Max. torque: 51.9 / 40.4 Nm Max. bar diameter: 32 mm Counter spindle: Max. speed range: 8,500 rpm Drive power: 3.7 / 2.2 kW Max. torque: 23.6 / 14 Nm Max. bar diameter: 32 mm Tool holder on slide 1: Fixed turning tools: 6-16 × 16 (8-12 × 12) Tools for front and back machining: 4-D.25 (5-D.20) Driven tools: 4-ER20 (6-ER16) Maximum Speed: 6,000-4,000 (6,000-3,815) rpm Power (S3 40% / S1): 1.9 / 1 kW Torque (S3 40% / S1): 3.5 / 3 - 5.25 / 4.5 Nm Tool holders on slide Y2: Fixed / driven tools for back machining: 4 / 0 Travel paths: Z1 travel (spindle stroke): 100 / 240 mm Tool holder 1: X1 / Y1 travel: 70 / 405 mm Counter spindle: X2 / Z2 travel: 300 / 200 mm Feed rates: Rapid traverse: (X1, Z1, X2, Z2) 40 / (Y1, Y2) 30 m/min Machine weight (incl. Coolant tank): 3.5 tons Operating hours: approx. 11,400 h Cjbvswgynhsqu Daegt Spindle hours: approx. 6,650 h Technical features: - Number of linear axes + c-axes: 6 + 2 pcs. - Number of spindles: 2 pcs. - Number of Channels: 2 pcs. - 28 tool positions on 2 independent linear holders - Up to 10 driven tools - Flushing for counter spindle collet - Conversion kit for short-turning to long-turning - Kit for emulsions - Preparation for oil mist extraction - DMG Mori Netservice client Accessories: - Internal coolant supply, 600 l tank - Hinged belt chip conveyor - Main spindle reducer tube - Bar loader, make IEMCA BOSS 338/32 HD - Transformer from 400 V to 200 V / 16 kVA - Signal lamp, 4-color Several machines are available. The technical specifications and equipment of the various machines may vary. Please contact us for specific information. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 92,000 h, Functionality: fully functional, turning length: 1,097 mm, turning diameter over cross slide: 455 mm, spindle speed (min.): 18 rpm, spindle speed (max.): 3,600 rpm, spindle bore: 107 mm, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, tool mount: 40 mm, total height: 2,130 mm, total length: 5,560 mm, chuck outer diameter: 315 mm, total width: 2,400 mm, quill stroke: 120 mm, quill diameter: 120 mm, overall weight: 8,900 kg, spindle diameter: 90 mm, We would like to get rid of our CTX500 due to a new purchase. The machine was built in 2002 and has since then done 91,535 hours for our company. The CTX500 is a 2-axis universal lathe with a partial hollow clamping device and has a chip conveyor, a tailstock, a three-jaw chuck SMW KNCS-N 315 and a tool carrier with 12 stations. It is fully functional and without any restrictions as it is and has been serviced at regular intervals. If you are interested, we could inspect the machine during a viewing and carry out a test run as it is still running as a production machine and is therefore under power. A sale would be possible immediately, handover possible in week 19 2025. Here are a few more technical details about the machine: Working area: - Swing diameter over bed track cover 680 mm - Swing diameter over face guide 455 mm - Chuck diameter 250/315 mm - Face stroke 320 mm - Longitudinal stroke 1097 mm Headstock: - Spindle head (flat flange) 220 h5 mm - Spindle diameter in the front bearing 140 mm - Spindle bore 107 mm Main drive: - Power of the three-phase main drive 23 kW - Speed range 18-3600 rpm Tool carrier: - Number of tool stations 12 (Tool holder according to DIN 69880 (VDI 3425) - Cylinder shank diameter 40 mm Cobvevzy Dtsqu Dasgt - Switching time 30° 0.86 sec. 180° 1.62 sec. Tailstock: - Quill diameter 120 mm - Quill holder MK 5 - Quill stroke 120 mm - Quill force max. 1400 daN Hydraulics: - Capacity approx. 30 l - Max. pressure 80 bar - Pressure for clamping device max. 80 bar Coolant device: - Capacity approx. 220 l - Pump output 1.7 kW - Delivery rate at 6 bar 20 l/min Fresh oil lubrication: - Capacity approx. 5 l Electrical connection: - Total connected load approx. 58.5 kVA - Voltage 400 V - Frequency 50 Hz - Fuse (slow) according to VDE 0100 100 A - Permissible voltage fluctuation at 400V (+/-) 10 % Ambient conditions: - Permissible ambient temperature from +15 to +35° C - Max. relative humidity 75 % - Max Installation altitude 1000 m above sea level Weights: - Net weight of the machine without chip conveyor approx. 8700 kg - Gross weight of the machine when transported by truck approx. 8900 kg Dimensions: - Machine with chip conveyor L x W x H approx. 5560 x 2400 x 2130 mm We are of course happy to answer any further questions you may have. Please just contact us.

Condition: new, Year of construction: 2025, OPTIturn TU 2004V - Lathe with infinitely variable speed control and digital speed display Picture shows OPTIturn TU 2004V Lathe with infinitely variable speed control and digital speed display Precise processing Cobecnxrcevqu Dasgt Heavily ribbed prismatic bed made of cast steel, inductively hardened and precision ground Hardened and ground bed guideways Hardened spindle nose (DIN 6350) Guaranteed concentricity of the spindle nose better than 0.009 mm Automatic length/lead spindle drive With longitudinal, cross and top slide Right-/left-handed rotation switchable in the control panel Emergency-stop pushbutton Rotary chuck protection Thrust bearing Lead screw mounted in two sintered bearings Large thread cutting range due to change gear set Simple and fast speed change via V-belt Change gearbox EMV filter class B (use in private households) Equipment details: Digital speed display Easy to read digital speed display Chip protection on the top slide Quadruple steel holder rotatable Roll rolled trapezoidal threads Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scaling 0.02 mm Main spindle Hardened and mounted in adjustable precision taper roller bearings Tapered roller bearings in P5 quality Cylindrical centering seat Hardened spindle nose with Ø 21 mm spindle bore Lathe chuck Concentricity better than 0,04 mm Scope of delivery: Three-jaw chuck Ø 100 mm centric clamping

Condition: new, NEW MACHINE // MULTIPROCESS CENTERS GMTK HR 800 / 1000 / 1200 / 1500 SIEMENS SINUMERIK ONE control system Ø over bed slide: 820 / 1,020 / 1,220 / 1,520 mm Center distance: 2,500 to 10,000 mm Max. workpiece weight: 3,500 to 20,000 kg Main spindle motor: 22 + 22 to 52 + 52 kW Max. speed: 1,260 to 2,700 rpm Max. torque: 3,340 to 12,575 Nm C-axis Milling spindle motor: 27 to 46 kW Milling spindle speed: 3,000 to 5,000 rpm Max. Torque: 261 to 712 Nm Internal coolant supply 70 bar B-axis swivel range -110° / +90° Cgsbvqjwaxapsu Dajt Tailstock quill diameter: 180 to 320 mm Tailstock quill stroke: 200 to 280 mm Robot tool changer: Unlimited number of tools or can be configured to customer specifications Only inquiries from Germany will receive a response // Only inquiries from Germany will be processed

Condition: as good as new (ex-display), Year of construction: 2025, Functionality: fully functional, overall weight: 2,500 kg, total length: 4,200 mm, total width: 2,500 mm, total height: 2,170 mm, travel distance X-axis: 390 mm, controller manufacturer: Siemens, controller model: 840D sl + ShopTurn mit „manual machine“, turning diameter over cross slide: 370 mm, bed width: 433 mm, center height: 315 mm, center width: 2,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, rapid traverse Z-axis: 8 m/min, rapid traverse X-axis: 8 m/min, spindle bore: 140 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, turning diameter over bed slide: 630 mm, Equipment: rotational speed infinitely variable, Swing over bed: 630 mm Center distance: 2000 mm Maximum speed range: 2500 rpm Cobvqu Dowgbuijaogt Spindle power (100% duty cycle): 20 kW (AC drive) Spindle mount: Camlock D11 Spindle bore: 140 mm Included equipment includes: - 8-station SAUTER VDI-40 turret - Movable control panel along the entire length - Chip conveyor - Siemens AC servo motors - Siemens power supply and amplifier modules - Automatic (or via M function) gear change (2 speeds) - Machining area covered by two sliding doors - Operating mode 1 and operating mode 2 (setup mode at 5 rpm) - Siemens 840D sl ShopTurn control system with "manual machine" - 15-inch touchscreen format 16:9 - With manual machines, cycles can be executed without creating a program header. - Siemens control option: residual material detection. - Absolute encoder (i.e., no reference point travel required). - USB interface on the control panel. - Manual tailstock with drag device and 100 mm spindle diameter. - Automatic central lubrication. - Coolant system.

Condition: good (used), Year of construction: 2014, Maximum turning diameter 800mm, maximum swing 890mm, Cgjbov Enwisvqu Daot maximum turning length 800mm, table power 30Kw, table speed 2,000 rpm, Milling power 7.5Kw, milling speed 3,000rpm, C axis 0.001 degrees, 12 station turret, Fanuc Series 32i, tool setter, coolant, tooling and swarf conveyor.

Condition: good (used), USB, 22kw, gearbox, 3400rpm, A2-8 spindle 102mm bore, chipconveyor, Toolsetter, rigid tapping, M19, VDI40 12 station turret, part catcher, Hainbuch SK80, Iemca bardeeder 1600mm Cjbvoviyu Uoqu Daogt

Condition: excellent (used), Year of construction: 2000, MAZAK SUPER QUICK TURN 200M x 500 Max. machining diameter: 300 mm Max. machining length: 538 mm Max. spindle speed: 5,000 rpm Max. milling speed: 4,500 rpm Max. bar diameter: 51 mm Machine is equipped with: - CNC control: Mazatrol PC Fusion CNC 640T - KITAGAWA three-jaw chuck B-208, diameter 210 mm - Tool Eye - C-axis - NC tailstock - Reinforced coolant pump - MAYFRAN chip conveyor - 8 stationary tool holders Cobvqujv Nv Ids Daegt - 2 driven tool holders

Condition: excellent (used), Year of construction: 2001, Optimum D 1340 GDE year 2001, top condition - as a training machine - Turning diameter over bed 330 mm Turning diameter over support 160 mm Turning length 800 mm Total power requirement 2 kW Machine weight approx. 400 kg Space requirement approx. 2000x1000x1600 mm Bar diameter 38 mm Speed range 70 - 2000 rpm Spindle nose Cgjbvquevutyhs Dast Feed range 0.025 - 2.553 mm/rev Suitable for threads: Metric 0.25 - 11 mm Suitable for threads: Inch 4 - 112 Gg/" Tailstock: MK 3 Control Conventional 3-jaw chuck Location: from stock 54634 Bitburg - available at short notice -

Condition: new, NEW MACHINE // MULTIPROCESS CENTERS GMTK VR 2.4 & 2.8 SIEMENS SINUMERIK ONE control system Turning diameter: 2,400 / 2,800 mm Faceplate diameter: 2,000 to 2,600 mm Turning height: 1,200 to 2,800 mm Max. workpiece weight: 10,000 to 30,000 kg Drive power: 44 to 104 kW C-axis (hydrostatic bearings) W-axis (crossbeam) X and Z axes (hydrostatic bearings) Milling power: 22 / 37 kW Cobvqu Djwaw Tboasgt Robot tool changer: Unlimited number of tools or can be configured according to customer requirements Pallet changer: Unlimited number of stations or can be configured according to customer requirements Only inquiries from Germany will receive a response /// Only inquiries from Germany are processed

Condition: ready for operation (used), Type: TNO FAB 12-24quot; Draagbare machine, ideaal voor het snijden en afschuiven van dikke wandbuizen Elektrisch aangedreven Uitrusting met hydraulische aandrijving voor automatische klemming Automatisch oplopende toevoersysteem De buis wordt van buitenaf vastgeklemd en de snijgereedschappen draaien rond de buis Klembereik: 304,8 610 mm Slag van de gereedschapshouder: 100 mm Bruikbare voeding van snij-/afschuingereedschapsbits: 60 mm Voeding van klemcilinders: 100 mm Gewicht: 1200 kg machine voor het couperen en frezen van buizen Cobvqu Dsv Tapgsaogt

Condition: good (used), Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 56.4 -Turning diameter: up to approx. 900 mm -Travel: X 110 mm / Z mm -Drive motor: 0.55 kW -Dimensions: 1660/1700/H470 mm Cgsbswbd Ibsvqu Dast -Weight: 224 kg

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 20 h, Functionality: fully functional, Weiler Praktikant VCD lathe, as good as new, built in 2018, with a 3-axis digital display, three-jaw chuck, collet chuck, Multifix, and chuck guard. Weight approx. 1000 kg. Machine in as good as new condition, exhibition machine. CE compliant. Cebvqowg E H Aou Daegt

Condition: good (used), Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 57.3 -Turning diameter: 400 - 1600 mm Cgjbvqowbdrtsu Dast -Travel: X 180 mm / Z 60 mm -Drive motor: 1.1 kW -Accessories: nsport and assembly frame, individual components see photos -Dimensions: 1930/1280/H1000 mm -Weight: 730 kg