Condition: excellent (used), Multi-spindle & bar-turning lathes TRAUB TK 42 * Spindle power 5.5 - 9 kW * Maximum workpiece length 206 mm * Spindle bore 42 mm * Length L - R 2500 mm * Width V - H 900 mm Cjhx Ap Newc Aqdofegt * Height 1700 mm * Tool changer holder 4 slides

Condition: new, machine/vehicle number: 0000, We offer complete revised FAT Lathes TUR 630 x 2000 oder 630 x 3000 Cehonqzaiex Ap Nfjgt Machine deliverytimes 3 - 4 Monate nach Auftrag Accescories as per Customer specifications

Condition: used, Year of construction: 1971, turning diameter over cross slide: 2,000 mm, turning length: 10,000 mm, Heavy-duty lathe Manufacturer: Skoda Year of manufacture: 1971 Turning diameter: 2000 mm Turning length: 10000 mm With steady rests Cgehxjwbu Avs Ap Nfjt Digital display New electrical system

Condition: good (used), Year of construction: 1960, - Year of manufacture: 1960 - Condition: Used, in very good condition considering its age, fully functional - Dimensions: 2,730 x 1,100 x 1,350 mm (L x W x H) - Max. turning diameter: 630 mm - Max. turning length: approx. 900 mm Emergency stop, key switch, and chuck cover retrofitted, electrical system partially replaced. Accessories: Steady rest, tailstock holder, 4-jaw chuck, soft jaws, centers, small jaw chuck, turning tools (all aligned to center height, as no Multifix is installed), machine feet. Cshx Ap Nswc Unnjfegt Top slide with Multifix can be retrofitted. Machine weight: approx. 3.2 t

Condition: good (used), Mazak Integrex 35 Y CNC Lathe Model: Integrex 35Y Year: 1998 Control: Mazatrol T Plus Max Swing: 562mm (22.5”) Max. Turn Dia.: 562mm (22.5”) Machining length: 1500mm (60”) Spindle Bore: 86mm (3.46”) Spindle Speeds: 3000 RPM Cohx Apjvz Dlze Nfsgt Machine with: 40 station ATC 16” dia. 3 – jaw power chuck Driven Tools

Condition: used, centre height 102 mm Cgshx Ap Nowbi Hpjfst centre distance 450 mm spindle bore 25 mm spindle speed: 220 - 2600 Accessories were not checked for completeness Cabinets are not included in the scope of delivery

Condition: good (used), Year of construction: 2013, BAR CUTTING MACHINE TRAUB A 25 2013 Cjhx Apswc Amxj Nfogt Turning length: 65 mm Total power requirement: 2 kW Machine weight: approx. 0.7 t Space requirement: approx. 1200 x 700 x 1600 mm Thread length: 40 mm Max. part length: 65 mm Motor speeds: 1400-2800 Bar loader available!

Condition: used, Year of construction: 1997, max. swing over bed 890 mm max. Turning diameter over bed 830 mm centre distance 2.000 mm control SIEMENS - 840 C main spindle bore 122 mm spindle diameter in front bearing 200 mm Cgehx Ajvn U Tiop Nfst driven tools turning speeds 1.250 U/min CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 25 UK / 2000 equipped with a turret for driven tools and tailstock. The milling drive was overhauled in 2023. Additional equipment / extensive package of tools a.o.t.: - Centering points, - Jaw sets, - Clamping jaws, - bezel - 2x 3 jaw chuck, The machine videos from the production plant will be shared on request. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Heynumat 25 UK | Heynumat 25-UK | Heynumat 25 UK 2000

Condition: excellent (used), Year of construction: 1999, CNC Control: MSD-501II (FANUC 18i-T) X-axis mm: 210 Z-axis mm: 550 Y-axis mm: - Maximum Turning Diameter mm: 250 C-axis Increment: 0.001 Maximum Turning Length: 500 Cutting Feed mm / min X, Z, Y: - Travel over Bed mm: Ø Travel over Carriage mm: Ø Bar Pitch mm: Ø 51 Cgehx Aowf E Anop Nfot Max Rapid Traverse m / min X,Z: 18.24 Main Spindle 6" Spindle Speed rpm: 4,000 Spindle Power kW: 7.5 Torque Nm: - Spindle Bore: - Main Spindle Nose A2-6 Sub-Spindle Spindle Speed rpm: 4,000 Spindle Power kW: 7.5 Torque Nm: - Sub-Spindle Bore mm 41 Sub-Spindle Nose A2-5 Turret Positions 12 Number of Live Tool Stations 12 Live Tool Speed rpm: 3,000 Live Tool Power kW: 5.5 EQUIPMENT Chip Extractor Bar Loader 10-65 Bar Loader Interface Manuals Included Basic Fixed Tool Holder Equipment 1 x Axial and 1 x Radial Power Tools

Condition: ready for operation (used), controller model: Siemens Sinumerik, total length: 7,000 mm, total width: 2,300 mm, total height: 3,300 mm, net weight: 35,000 kg, PORTAL WHEEL LATHE Siemens CNC control track wheel diameter range: 540 1400 mm axle length: max 2600 mm max track: 1435 mm max. workpiece weight: 5 tons main power: 100 kW cutting speed: max 500m/min Railset lathe / Railway lathes / Rail lathe high machining accuracy in terms of concentricity and surface quality optimal force parallelogram measuring system for diameter and profile wear measuring system for CL+CR determination measuring system for determining the concentricity of the drive shaft measuring system for wheel and axle brake discs Cgshsv St E Eex Ap Nfjt re-profiling of all common locomotive, passenger car and wagon wheel sets planning of axles and wheel brake discs rim processing axle processing marking groove turning Chip shredder included

Condition: excellent (used), Functionality: fully functional, spindle bore: 52 mm, turning diameter: 440 mm, center height: 220 mm, turning length: 1,500 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, Very well-preserved machine with good equipment Cgshjv Iyz Sjx Ap Nfjt Technical data and accessories are listed in the offer! . .

Condition: used, Year of construction: 1994, turning diameter over bed 350 mm turning diameter over slide rest 310 mm turning length 700 mm total power requirement 4,6 kW weight of the machine ca. 1,0 t Dimensions (HxWxD) 2.200 x 1.300 x 1.175 mm --> Technical data Centre height: 175 mm --> Centre width: 800 mm --> Swing diameter over bed: 350 mm --> Swing diameter over support: 310 mm --> Gap length in front of the faceplate: 145 mm --> Cross slide travel: 205 mm --> Top slide travel: 100 mm --> Tool cross-section: 20x20 mm --> Bed Width: 220 mm --> Height: 300 mm Cgehowc Dzwex Ap Nfjt --> Headstock Spindle bore: 46 mm --> Spindle nose: DIN 55027-5 --> Spindle inner taper: 1:20 --> Tool holder: MK-3 --> Spindle speeds: 18 --> Speed range: 25 - 2000 rpm --> Tailstock Quill diameter: 50 mm --> Quill inner taper: MK-3 --> Quill travel: 140 mm --> Lateral adjustment: 10 mm --> Feed range Number of feeds: 256 --> Longitudinal feeds (128): 0.042 - 0.929 mm Rev --> Cross feeds (128): 0.015 - 0.338 mm Rev Quick clamping device, 10 x collets, 3 - jaw chuck Multifix steel holder size B, 8 x inserts 2 x travelling steady rest, 2 x chuck flange Multiple stop, machine feet Operating instructions

Condition: excellent (used), Year of construction: 2000, CNC Lathe ZPS S 80 CNC/1000 2000 spindle bore : 92mm Bar diameter : 80mm X- axis : 275mm Z- axis : 1070mm Turning length : 1000mm Swing diameter : 430mm Cgohjp N A D Djx Ap Nfet Swing diameter over bed : 680mm number of tool holders : 12 ( driven ) Heidenhain Pilot 3190 Version with driven tools CNC fully controlled C axis three-jaw chuck RÖHM D 315 mm hydraulic clamping cylinder

Condition: used, turning diameter 1.600 mm max. swing diameter 1.700 mm control Siemens - 840D faceplate turning speed range 1 - 320 U/min rapid traverse 3.000 mm / min feed range 1 - 3.000 mm/min size of pallet 1.168 mm numbers of pallets 2 main drive 55 kW Vertical turret lathe with cnc | SCHIESS MOWEG - BERTHIEZ TFM 125 has been overhauled by SCHIESS MOWEG (RETROFIT) in 2007. The machine video from the production plant will be shared on request. Cgjhjvp Shgox Ap Nfst The machine is in very good condition and was in operation at an aviation company until recently. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TFM125 | TFM-125

Year of construction: 2009, Condition: ready for operation (used), Spindle clearance: 65mm/42mm, tool positions: 3x10, speed: 5000rpm, travel X/Z: 650mm/175mm, travel Y: +/-40mm, machine dimensions X/Y/Z: approx. 4750mm/2400mm/2700mm, weight: approx. 10000kg, operating hours: 76164h, including Knoll KTS 25-38-T coolant system, Resy KBF 452 compact belt filter and FMB turbo 5-55/4200 bar feeder, documentation available. On-site inspection is possible. Expected to be available from Q4 2025. Cohswg E A Rsx Ap Nfsgt

Condition: ready for operation (used), controller model: Heidenhain Manual Plus, total length: 8,400 mm, total width: 3,550 mm, total height: 2,100 mm, net weight: 10,000 kg, swing diameter over cross slide: 5,000 mm, additional equipment features: yes, Heidenhain-besturing Spaantransportband Beschermhoezen Extra stabiel Swing over bed: 1250 mm Cgjhjv St Ersx Ap Nfot Swing over cross-slide: 930 mm Dia of spindle bore: 128 mm Power on the spindle: 41 kW Number of speeds: 4 > 630 rpm Total power needed: 67 kVa Chuck: dia 1000 mm

Condition: good (used), Good condition Electronic unit Ready for delivery 4000 MM Cehxevnmmus Ap Nfegt Steady rest

Condition: excellent (used), Year of construction: 2017, MAZAK QUICK TURN 250MB 500U Max. machining diameter: 380 mm Max. machining length: 541 mm Max. milling speed: 4,000 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 80 mm Machine is equipped with: - Mazatrol SmoothG CNC control - Kitagawa BB-210 three-jaw chuck, 254 mm diameter Cgohx Apewc Tb Hj Nfet - Tool Eye - C-axis - Bar feeder interface - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 stationary tool holders - 2 driven tool holders

Year of construction: 1999, Condition: ready for operation (used), General Data Measurements width 1330 mm Measurements depth 2007 mm Cgohxsv T D Tve Ap Nfjt Measurements height 1780 mm Machine weight 2650 kg Control Unit Brand MAZATROL Model PC FUSION CNC 640T Main Drive Spindle speed range 50 - 6000 rpm Spindle bore 50 mm This Mazak QTN-10 was manufactured in 1999. A robust horizontal turning machine, it's ideal for precision machining. Consider the opportunity to buy this Mazak QTN-10 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: good (used), Functionality: unexamined, turning diameter: 260 mm, turning diameter over bed slide: 200 mm, turning length: 1,200 mm, total length: 2,200 mm, total width: 800 mm, total height: 1,400 mm, overall weight: 1,000 kg, bar passage: 55 mm, EQUIPMENT: Cshx Aowdpnfjp Nfsgt - Tailstock - Three-jaw chuck (Ø 200 mm)

Year of construction: 2014, Condition: used, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details Cjhx Ap Nsqvd Iqefjgt were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: ready for operation (used), net weight: 54,000 kg, Portaal Wielset Draaibank middenhoogte: 630 mm spoorbreedte: 1435 mm grootste mogelijke klembare schachtlengte: 2400 mm kleinst mogelijke klembare schachtlengte: 1650 mm grootste mogelijke overspanning: dia 1100 mm kleinste mogelijke overspanningscirkel: dia 550 mm middelpunthoek: 90° max. werkstukgewicht: 3500 kg De Hegenscheidt-MFD portaalwieldraaibank is een wieldraaibank met hoge productie die eenvoudig te bedienen en onderhouden is. Het portaalontwerp zorgt ervoor dat de draaibank kan rollen op werkplaatsrails. De mechanische elementen en het aandrijfsysteem zijn ontworpen voor snijprestaties tot 32 mm² per gereedschapspost. Dit zorgt voor een korte vloer-tot-vloertijd voor haarprofilering, zelfs bij extreme wielslijtageomstandigheden. Aan elke kant van het portaaltype bed zijn de headstocks gemonteerd, met geïntegreerde drivers, centra en een hoofdaandrijfsysteem dat op elke headstock is gemonteerd. Beide headstocks zijn verplaatsbaar voor het gemak van de laad- en losfuncties. Werkbereik Bewerking van nieuwe en versleten wielstellen Wielprofielbewerking Bewerking van velgen voor vrachtwielen Uitrusting samenstelling Hoogwaardige machine die in staat is tot middelzware en zware snijdieptes Portaalbed waardoor wielstellen erdoorheen kunnen rollen Installatie van apparatuur op werkvloerniveau treinwiel draaibank - Portal radsatzdrehmaschine - portal wielset draaibank - Портальный колесотокарный станок Railset draaibank / Spoorwegdraaibanken / Raildraaibank Cgehx Apsv St Hvo Nfjt Power on main spindle: 60 kW on each chuck Number of speeds: 9 > 180 m/min cutting speed

Year of construction: 2018, Condition: ready for operation (used), Main Drive Spindle speed range 60–6000 Spindle motor power 11/15 kW Tool taper A2-5 Media Oil water separator Yes Chip conveyor Yes Additional Equipment Turret with Direct Mount (12 stations) High-Precision Linear Guides on All Axes Coolant System Hydraulic System Full Enclosure Automatic Lubrication System Cohx Ap Nswdba Tofegt Signal Lamp (3-color) Work Area Lighting Automatic Machine Shutdown (via M-Code) Automatic Chuck Operation This Goodway GLS-150 was manufactured in 2018. A robust horizontal turning machine featuring a FANUC 01-T control system with a 10.4" LCD and Manual Guide functionality. It boasts a spindle speed of 60-6000 RPM and a maximum bar capacity of 51 mm. Equipped with a high-precision linear guide on all axes, a 12-station turret, and a reinforced coolant pump for enhanced performance. If you are looking to get high-quality turning capabilities consider the Goodway GLS-150 machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2007, greates pass round over bed 670 mm swing diameter over bed slide 490 mm max. turning diameter 490 mm control SIEMENS - 840 D main spindle bore 115 mm external spindle dia. in forward position 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, - 3 jaw chuck, The machine is in a well-maintained condition and can be inspected at any time under power. Cohx Ap Nju Hrbfefogt Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 5 U | HEYNUMAT 5-U | HEYNUMAT 5 U 1500

Year of construction: 2014, Condition: used, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° Vertical Turning Machine | EMAG - VL2 Cohxoqvd Ius Ap Nfegt equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2