Used Horizontal Slot Mortising Machine for sale (85,121)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1200x1200 mm Itjdpov A Hydsfx Aa Eor Weight 700 kg Total power requirement 1,9 kw

Condition: used, Year of construction: 2006, Machine including brand new 2-jaw chuck Machine cleaned, lubricated, partially overhauled, test run performed Drill chuck replaced. Chuck runout: 0.03 mm Used, top condition, low operating hours Make: Hofmann Model: LB 760 Year of manufacture: 2006 Machine no.: 76-01420 CE type-examined Motor: 1.8 kW, 2 speeds Table size: 760 mm Drill capacity: 0–20 mm Drill chuck: 20 mm Dowel boring device with 4 position stops Workpiece stop Mitre stop 45° Centre stop Motor speed: 2 settings (1500/3000 rpm) Digital height display Manual workpiece clamp, 1 x with 2 columns Extraction connection: Ø 120 mm Space requirement: approx. 1300 x 1200 x 1400 mm Weight: approx. 260 kg Location: 97447 Gerolzhofen, free loaded, unpackaged Ijdpfx Aaew Ed Uis Ejtr Delivery in as-inspected condition, without guarantee or warranty.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 720x900x1160 mm Weight 120 kg Total power requirement 2,2 kw Iedpfx Aajvz Hk To Eotr

Condition: used, Year of construction: 1995, with pneumatic lift for drilling on 2 levels used, excellent condition, low hours Manufacturer: Hoffmann Model: HR 150 Year of manufacture: 1995 Machine no.: 15201 CE type tested Drill chuck: 16 mm Dowel drilling device with 1 piece indexing guide Workpiece stop Mitre gauge 45° Itsdpfx Aasw Ed Ucs Esr Center stop Mobile Pneumatic lift Digital displays Pneumatic workpiece clamps, 2 pcs Space requirements approx. 1200 mm x 900 mm x 1300 mm Weight approx. 350 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery as is, as inspected, without guarantee or warranty

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1000x740x1260 mm Weight 240 kg Itjdjvz Hm Iepfx Aa Ejr Total power requirement 2,4 kw

Condition: new, with quick stroke system- NEW -drilling width 240 mmdrilling depth 180 mmdrilling stroke 160 mm2-step motor 1400/2800 rpm instead of 2,2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricweight 246 kgitem no. 300015including accessories:1 piece 2-step motor 1400/2800 rpminstead of 2,2 kW no. A2500701 piece plug-in fence 90° no. A3501281 piece lling grid system with4 rows of holes 16,20,22,25 mmBowden cable operation No. A3002551 piece 4-wheeled trolley with 2 swivel castorsand 2 brakes on own frameNo. A3504151 piece eccentric pusher with column andclamping cross No. A250055 Iodpfovwf H Eex Aa Eotr

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1160x750x1080 mm Weight 260 kg Total power requirement 2,2 kw Itodpfx Aaevz Hmbs Esr

Condition: new, with quick stroke system- NEW -drilling width 240 mmdrilling depth 180 mmdrilling stroke 160 mm2-step motor 1400/2800 rpm instead of 2,2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricweight 246 kgitem no. 300015including accessories:1 piece 2-step motor 1400/2800 rpminstead of 2,2 kW no. A2500701 piece plug-in fence 90° no. A3501281 piece lling grid system with4 rows of holes 16,20,22,25 mmBowden cable operation no. A3002551 piece eccentric pusher with column andclamping cross no. A250055 Itjdpfxevwfr Is Aa Esr

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1480x1150x1250 mm Isdpfx Aevz Evnsa Eotr Weight 550 kg Total power requirement 3 kw

Condition: new, withquick stroke system, rotatable drill head,operating instructionsdrilling width 240 mmdrilling depth 180 mmdrilling stroke 140 mmmotor power 2.2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricmotor rotation angle 65° right/leftweight 268 kgarticle no.: 320010A 2500702-speed motor, 1400/2800 rpminstead of 2.2 kw, (LLB/BS/BSK)A 250055Eccentric presser with column and clamping crossfor LLB 200/300/320A 3504154-wheel chassis for LLB 300/320/400with 2 swivel castors and 2 brakes onown wheels 2 brakes onown frameA 25012890° plug-in stop for LLB 200A lling grid system SH LLB 300 D/320 Dwith 4 rows of holes 16, 20, 22, 25 mm,Bowden cable operation Iodpfx Aaevwfrzs Ejtr

Condition: new, - NEW -Standard equipment:Motor 1.5 kWSpindle speed 2880 rpmMax. Spindle height above the table 160 mmMax. Drilling stroke 345 mmMax. Cross stroke 245 mmSpindle stroke 160 mmDrilling capacity 0-20 mmMax. Tool length 175 mmEccentric clamp 1 pcRotatable machine table 800 x 400 mm /- 45°Pivotable / rotatable drilling unit as optionTiltable machine table as optionMachine dimensions 1500x1100x950 mmMachine weight 345 kgincluded:- Suction nozzle no. P41 55- 2nd clamping eccentric no. P41 25- Dowel drilling device with 4 grid dimensions no. P41 20- Single lever operation- 2 speeds 1.5/1.9 kW 1440/2880 rpm no. P41 07- Digital display of spindle / drilling height no. P41 34 Itodpfxevwflze Aa Eor

Condition: used, Slot mortising machine SAMCO AS 16 - used - Movable motor, Dowel drilling device ----- Technical data ----- Worktable dimensions: 550 x 285 mm, Drilling width: 190 mm, Drilling depth: 120 mm, Speed: 2,840 rpm, Itodpsw Nv Nxsfx Aa Esr Motor: 1.5 kW, Weight: 220 kg

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Iodpfoxdttpjx Aa Eotr Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: new, With 2 eccentric clamps and motor protection. Adjustable end stops for transversal and longitudinal operations. Drilling unit tiltable on both sides Westcott-drill chuck mm with protective cover Smooth running height adjustment of drilling unit by hand wheel Iedpex H Ucmofx Aa Eetr Easy and comfortable one hand operation. Stop bar for series usable on both sides. With pin drilling device and mitre fence Technical data: Pin point distances 16, 22, 25 und 32 mm Table dimensions 600 x 320 mm Drilling depth 205 mm Drilling length 250 mm Vertical table stroke 165 mm Tilting of drilling unit on both sides 45° Motor speed 2840 rpm Engine power 3 kW S6 (2,2 Kw S1) Weight 180 kg

Condition: ready for operation (used), Year of construction: 1960, machine/vehicle number: 719, Manufacturer: Hurth Model : LF 00 Machine No. : 719 Year of manufacture : ca.1960 Weight: ca. 400 KG General / technical data: used horizontal grooving milling machine with crank gear controlled groove length adjustment and automatic depth adjustment groove width for cutter Ø: from 2 to 10mm length of grooves in one cut: from 0 to 60mm + cutter diameter 10 depth feeds feeds: 0,03 to 0,3 mm milling feed: 8 speeds of the milling carriage by crank stroke: 5,1 / 7,3 / 10,2 / 13,9 / 18,4 / 25,4 / 34,7 / 49,5 strokes/min spindle speeds: 4 pieces 970, 1370, 1950, and 2750 rpm table dimensions (rigid table): 160mm x 355mm table height adjustment: 40mm transversal movement of the table ( against the cutter ): 110mm power supply / spindle motor power: 380Volt 50 HZ / 0,8 KW / 920 1/min approx. space requirement of the machine: 670mm x 1100mm x 1200mm (bxtxh) Accessories / special equipment: Chip tray coolant device Machine documentation Itsdpfjg Uq Dfox Aa Ejr Remarks: The machine is in a condition corresponding to its age. The machine is preferably designed for production use in small and medium series. The machine has a simple crank gear adjustment to determine the length of the groove.

Condition: used, Camam Horizontal and vertical double mortising machine. 2 double horizontal spindles 3 vertical spindles right side 3 vertical spindles left side Itjdjwt S E Espfx Aa Esr

Condition: used, Year of construction: 1999, SECOND-HAND HORIZONTAL MULTIPLE OSCILLATING MORTISING MACHINE COMEC MOD. MMS / 1500 2C + 2UF - N. 8 spindles - N. 2 oscillating units - N. 2 drilling units (Left and Right) - Max working length 1500 mm - Locking system - Volts. 380/50 Itsdpfxowrdt Es Aa Eor - Matr. 921244 - CE rules - Year 1999

Condition: good (used), Year of construction: 1956, Slotting machine, slotting machine, high-speed planer, keyseating machine, keyway broaching machine, keyway broaching machine, keyway tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, power high-speed planer -Manufacturer: Lange & Geilen, horizontal slotting machine Kraft-Schnellhobler -Stroke: 350mm -Stroke rate: 20 - 110 1/min -Clamping table: 380 x 280 mm -Travel: X 410 mm Z 320 mm -T-Slot: 14mm -Propulsion: AEG 3 kW -Dimensions: 1460/1170/H1350 mm Itedpfolzmxyjx Aa Eor -Weight: 1140 kg

Condition: good (used), Year of construction: 1956, Slotting machine, slotting machine, quick planer, keyseating machine, slotting machine, slotting machine, slotting tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, schepping -Manufacturer: Elliott, horizontal shaping machine type 24M SHAPER -Stroke: 610mm Isdpfxsh Nvy Ej Aa Ejtr -Stroke rate: 8 - 74 1/min -Clamping table: 580 x 330 mm -Travel: X/Y/Z 375/755/292 mm -T-Slot: 20mm -Drive: 3.7 kW -Dimensions: 2080/1120/H1550 mm -Weight: 1520 kg

Condition: good (used), Slotting machine, slotting machine, high-speed planer, keywayseating machine, keyways slotting machine, keyways slotting tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, high-power high-speed planer, metal planer/slotting machine -Manufacturer: Klopp, horizontal slotting machine, power planer type DP AP -Stroke: 525 mm -Stroke rate: 16 - 164 1/min Itedpfewck I Dox Aa Eor -Travel: X 500 mm Z 290 mm -Drive: 2.2 kW -Dimensions: 1810/1160/H1420 mm -Weight: 1130 kg

Condition: new, functionality: fully functional, feed length X-axis: 510 mm, feed length Y-axis: 510 mm, feed length Z-axis: 510 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, 📄 Product Description The Tongtai SH-4000P is a high-speed, high-rigidity horizontal machining center designed for efficient machining of aluminum and light metal workpieces. It features a compact structure, three-point support bed, high rapid traverse speed, and optional APC (Automatic Pallet Changer). The built-in spindle provides high speed and precision, ideal for automotive and general manufacturing industries. ⚙️ Technical Parameters Strokes on X/Y/Z: 510/510/510mm Itodpfx Aoxnizdoa Eor B axis rotary table: 0,001º indexing table Rapid traverse on X/Y/Z: 60/60/60 m/min Pallet size: 2 x (400x400mm) Maximum load on the table (pallet): 2 x 400kgs Maximum workpiece dimension (diameter x height): Ø 550 x H 800mm Spindle speed: 15.000 rpm Built in spindle motor: 18.5/26/37 kW Machine size (Width x Depth x Height): 1.750x5.060x2.720mm Machine weight: 8.700kgs Fanuc controller model 0i-MF with Manual guide i and 10,4''LCD monitor Tool shank: BBT-40 ATC with 60 tools CTS ( coolant through spindle): 70bar Chip Conveyor integrated type with trolley Oil Skimmer

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Movement X-Axis Movement 578 mm Z-Axis Movement 2033 mm Tail Stock Pinol tool taper Morse Taper MT6 Additional Equipment Stations: 12 Type: BMT75P Tooling: All tooling available, including boring bar holders, general turning tool holders, facing tools Collets: ER40 Collets This DOOSAN Puma 400LM was manufactured in 2014. A robust horizontal turning machine featuring a spindle speed of 1500 rpm and a 12 station turret BMT75P compatible with ER40 collets. It comes with a comprehensive set of tooling, including boring bar holders, general turning tool holders, and facing tools. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 400LM machine we have for sale. Contact us for more information. Application Types Turning Isdpsx D Nkqsfx Aa Ejtr

Condition: used, Year of construction: 2000, - Year: 2000 - Documentation available: No - CE certificate present: No - Serial number: AL/5776 - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 6.6 Itsdsw Dzliepfx Aa Ejr - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - - Max. spindle speed [rpm]: 18000 - - Main motor power [kW]: 7.5 - Type milling table: Beam table - Tool clamping system: ISO30 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 18 - Saw unit present: Yes - Tool changer positions [pcs.]: 10 - System/software: NUM 1040 - Safety feature: Bumper guard - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: becker - Working range X [mm]: 3600 - Working range Y [mm]: 1350 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Year of construction: 2014, condition: ready for operation (used), General Data Machine weight 15500 kg Main Drive Number of axis 7 Spindle Speed 4000 RPM Spindle motor power 22 kW Control Unit Brand FANUC Model Series 31i-MODEL B5 Movement X-Axis Movement 630 mm Ijdox D E Rajpfx Aa Estr Z-Axis Movement 1585 mm Y-Axis Movement 115 mm This 7-axis DOOSAN Puma MX2600ST was manufactured in 2014, featuring a robust horizontal turning machine design. It includes a B-axis of +/-120 degrees, extensive X, Y, Z travels, and a bar capacity of 76mm. The machine is equipped with a FANUC 31i-Model B5 control, a 40 station tool changer, and a 22kW spindle motor. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma MX2600ST machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2014, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: No - CE certificate present: Yes Itedpfx Aajx Hwhxs Ejr - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - Type milling table: Beam table - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - CNC documentation available: USB stick Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets