Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 220 mm, travel distance Z-axis: 650 mm, number of axes: 3, This DMG NEF 400 was manufactured in 2006. It features a maximum spindle speed of 4000 RPM and includes a 12-station tool turret for efficient tool management. The machine is equipped with a manual tailstock and a 3-jaw chuck for versatile clamping. If you are looking to get high-quality turning capabilities, consider the DMG NEF 400 horizontal turning machine we have for sale. Contact us for further details. - Number of Controlled Axes: 3 axes (X, Z, C) - Swing Diameter: - Over Bed: approx. 400 mm - Over Cross Slide: approx. 230 mm - Turning Diameter (max.): approx. 200 - 250 mm - Rotary Axis: C-Axis (main spindle indexing / positioning) - Control Unit: Heidenhain EP 4290 TP (Heidenhain Plus panel) - Spindle Speed (max.): 4000 RPM - Apparent Power: 21 kVA - Nominal Current (Jn max): 31 A - Fuse / Total Current: 35 A / FN1 - Operating Voltage: 400 V (50 Hz) - Control Voltage: 230 V / 24 V- Tool Carrier: 12-station tool turret (VDI 30 / VDI 40) - Clamping Device: 3-jaw manual/hydraulic chuck installed Chedpfx Aj Ah Sh Tsp Djd Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 1997, Index ABC Turning Machine, Main spindle, Bar capacity: max. 52 mm, Main spindle speed: max. 5,000rpm, Main spindle power: up to 20 kW C-axis: available, Sub-spindle, Sub-spindle speed: max. 4,500 rpm, Sub-spindle clamping diameter: max. 42mm, Turrets and live tooling, Turret 1:8 tool stations, Turret 2:6 tool stations, Linear tool carrier: max. 6 tools, Live tool speed: max. 6,000rpm, Live tool drive power: 3.3 kW, Rapid traverse: up to 24m/min, Coolant tank: 210 l, Hydraulic pressure: 90 bar, Dimensions & weight, Machine height: 1,750mm, Footprint: approx. 2.4 m², Machine weight: approx. 2,500kg, Synchronous/sub-spindle, Live tooling, Bar feeder up to Ø 52mm, Chip conveyor, Workpiece discharge via conveyor belt. S/No. 400733 (1997). Country of Origin: Germany Chjdpfx Aj Ah Hb Sep Dod Location: These lots are located in Leicester and Coventry, UK. Please see individual lot for dismantling and loading charges.

Condition: used, Year of construction: 2012, 900mm Swing, 650mm max. machining diameter, Chedpfx Ao Agkrvop Dsd 2042 mm maximum turning length, 1500rpm spindle, 165mm bar capacity, 10 station turret 45kW spindle motor, FANUC Series 32i control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, Hydraulic steady.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Wemas Type: HITURN Year of manufacture: 1999 Machine number: 180 Machine type: Cycle lathe Control System Control system: Heidenhain Chodpfxo Advbys Ap Djd Electrical Data Operating voltage: 380 V Frequency: 50 Hz MACHINE DETAILS Performance Connected power: 11 kW Dimensions and Weight Length: 3,000 mm Width: 2,000 mm Height: 1,800 mm Weight: 3,000 kg EQUIPMENT Tailstock Multifix tool holder Steady rest

Condition: used, Hurco TM6i, 2 Axis CNC Lathe, Year 2013, Tailstock, Collet Chuck, Swarf Conveyor, Air Bench Filtermist, Hydrafeed MSV 65 Bar Feed Unit, with 3 Jaw Chuck Hurco TM6i CNC turning centre with slant bed design. Compact and reliable CNC lathe suitable for precision machining, subcontract engineering and production work. The Hurco TM6i CNC Turning Centre is a compact slant bed CNC lathe designed for precision machining and efficient production of turned components. Suitable for subcontract engineering, toolroom and general manufacturing applications, the machine offers a practical solution for a wide range of turning requirements. Manufactured by Hurco, a respected builder of CNC machine tools, the TM6i is designed to provide reliable performance, machining accuracy and operator-friendly operation. Its rigid construction and compact footprint make it well suited to both production environments and smaller engineering workshops. Chsds Aggphspfx Ap Dsd The machine is capable of producing a wide variety of precision components and represents an excellent opportunity to acquire a quality CNC turning centre from a recognised manufacturer. Available for inspection at our Prestwick, Ayrshire facility. Specifications: Swing: 15.94" Machining Length: 13.4" Chuck Size: 6.65" Bar Capacity: 1.75" Power: 17.5 hp Max RPM: 6,000 RPM Turning Dia: 12.4"

Condition: excellent (used), Year of construction: 2020, 2020 Haas ST-25 CNC Slant Bed Lathe & Tooling Package Haas Autogrip 3H-H12 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Maximum Cutting (Varies With Turret) Ø381mm. Bar Capacity Ø76mm. Axis Traverses 'X'=236mm, 'Z'=527mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,400rpm (22.4kW Motor). Spindle Nose A2-6. 12 Station Turret. Power On Hours 1,979. S/No. 3119435 (2020). With Coolant System (Tank Capacity 208L), Marposs Tool Setting Arm, Tailstock, Footswitches, Signal Tower, Tooling Package (Turning Tools, Jaws, Collets & coolant Fixings) & Manual. Machine Foot Print W3,630 x D2,290 x H2,340mm. Weight 4,536kg. Cedpfx Apoz Rqmrs Dshd

Condition: good (used), Year of construction: 2012, 780mm Swing, 630mm Swing over the Cross-Slide, 481mm Max Cutting Diameter, 790mm max cutting length, 12 Station Turret, 76mm bar capacity, 3500rpm, 22kW Spindle, Fanuc i, Tool setter, 10” 3 jaw chuck, Low Volt Light, Tailstock, Swarf Conveyor,parts catcher, Coolant. Chedpfe Aggfbex Ap Dsd

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,033 h, travel distance X-axis: 252 mm, travel distance Z-axis: 540 mm, controller manufacturer: SIEMENS, number of axes: 2, Horizontal turning machine manufactured in 2021. This DMG MORI CLX 350 features a CNC control console with a color display, a tool turret, and a 3-jaw lathe chuck. It also includes a chip conveyor with a discharge chute and overhead air/mist extraction ducting. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 350 machine we have for sale. Contact us for further details. - Travel X-Axis: 242 mm- Travel Z-Axis: 540 mm- Max. Turning Diameter: 320 mm- Max. Turning Length: 530 mm- Operating Hours (B/h): approx. 6,684 h- Working Hours: 1,033 h- Components / Ancillary Equipment: CNC touch control panel, tool turret, 3-jaw lathe chuck, chip conveyor with discharge chute, overhead air/mist extraction ducting, pneumatic regulation and service unit, Hestego telescopic slideway covers Chjdpfx Apo Ahydzj Djd Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2012, overall weight: 3,500 kg, bar diameter (max.): 32 mm, controller manufacturer: FANUC, controller model: Series 31i-MODEL A, number of axes: 7, This 7-axis DOOSAN Puma ST32G was manufactured in 2012. It features a maximum machining diameter of 32 mm and includes a main spindle with a Z1/C1 axis. The machine is equipped with 6 turning tools and 4 driven cross-machining tools, providing versatile capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma ST32G swiss type turning machine we have for sale. Contact us for further details. Chedpfxo Ahzbdo Ap Djd - Completely overhauled in 2022- Maximum Machining Diameter: 32 mm- Number of Axes: 7 (X1, Z1, C1, Y, X2, Z2, C2)- Main Spindle (Front Side): 1, Z1 / C1 Axis- Turning Tools (Front Side): 6 pieces (12 x 12 x 120)- Cross-Machining Tools (Front Side): 4 pieces (ER16) driven- Tool Holders (Front Side): 4 pieces (ER16M) driven- Sub-Spindle (Rear Side): 1 piece, X2 / Z2 / C2 Axis- Rear Tool Holder: 2 fixed tools and 2 driven tools- Deep-Hole Drilling: 2 tools- CNC Control Unit: FANUC Series 31i-MODEL A- Power Supply: AC 200/220V, 3 Phase, PE, 50/60 Hz- Rated Power: 21.04 kW- Interrupting Current: 5.0 kA- Full Load Current: 33.18 A- Short Circuit Current: 10.0 kA- Circuit Diagram Version: ST20H31AA09- Machine Weight: 3,500 kg- Optional Equipment:Profluid High-Pressure Coolant System (Model: PFMF-7015-S4)Bar feeder FMB TURBO 3-36 / 3200 (2012) Technical Specification Counter Spindle Yes

Condition: excellent (used), Year of construction: 2018, Technical Data Main spindle, counter spindle Turning length: mm 660 Spindle bore: mm 65 Chuck diameter: mm 165 Speed max.: min-1 6,000 Power (100% / 40% duty cycle): kW 20 / 24 Torque (100% / 40% duty cycle): Nm 125 / 170 C-axis resolution: degrees 0.001 Slide travel X: mm 710 Rapid traverse: m/min 60 Feed force: N 6000 Turret, lower / upper Speed max.: min-1 7,200 Power max.: kW 9 Torque max.: Nm 16 Milling spindle Tool system: HSK-A40 Speed max.: min-1 7,200 Torque (25% duty cycle): Nm 52 Power (25% duty cycle): kW 22 Tool holder 1 Slide travel X: mm 230 Rapid traverse: m/min 30 Feed force: N 6000 Slide travel Y: mm +/-65 Rapid traverse: m/min 15 Feed force: N 10,000 Slide travel Z: mm 845 Rapid traverse: m/min 50 Feed force: N 6000 3 Turrets Turret 1 YB - 6-position tool changer HSK Turret 2 Y Turret 3 y Year of manufacture 2018 Control system Siemens SINUMERIK 840D sl Turning length up to 660 mm Chodpfez Sywcex Ap Dsd Spindle bore 65 mm Milling spindle with 360-degree B-axis Production hours approx. 7,200 h Turret, lower and upper Feature Specification Stations and tool positions 14 stations per turret (VDI 25), a total of 42 tool positions Maximum speed 7,200 min⁻¹ Maximum power 9 kW Maximum torque 16 Nm Milling spindle Feature Specification Tool system HSK-A40 Tool magazine 6 tool positions B-axis 360 degrees Maximum speed 7,200 min⁻¹ Torque at 25 percent duty cycle 52 Nm Power at 25 percent duty cycle 22 kW Tool holder 1 Feature Specification X-axis 230 mm, rapid traverse 30 m/min, feed force 6,000 N Y-axis ±65 mm, rapid traverse 15 m/min, feed force 10,000 N Z-axis 845 mm, rapid traverse 50 m/min, feed force 6,000 N Tool holder 2 Feature Specification X-axis 140 mm, rapid traverse 30 m/min, feed force 6,000 N Y-axis ±45 mm, rapid traverse 15 m/min, feed force 10,000 N Z-axis 810 mm, rapid traverse 50 m/min, feed force 6,000 N Workpiece removal Feature Specification Design Gantry part removal system with conveyor belt Maximum workpiece length 200 mm Maximum workpiece weight 5 kg Dimensions and connection values Feature Specification Length × Width × Height 5,355 × 2,235 × 2,400 mm Weight approx. 8,500 kg Connected power 42 kW Bar feeder magazine and accessories Feature Specification Bar feeder magazine INDEX MBL 65 Coolant system KNOLL system with band filter and high-pressure pump 80 bar Automation Automatic door Accessories Tool holder

Condition: good (used), Year of construction: 2013, Ref. -No.: 10718 Manufacturer: REIDEN Type: RX 10 Chedpfx Aps Ahw Sij Dsd Year of construction: 2013 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Schweiz Machine-No.: 40-xxx Turning Speeds: 16.000 RPM X stroke: 1.000 mm Y stroke: 1.100 mm Z - stroke: 810 mm C-Axis: 360° Spindle power: 38 kW Tool Taper: HSK 63 Max. Rapid traverse: 60 m / min Further information: The machine is offered including all available accessories and technical documentation. The machine has been cleaned, is fully operational and can be inspected under power by prior appointment.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 800 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 370 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 4,000 rpm, feed length X-axis: 25,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 30,000 mm, total height: 2,574 mm, total length: 3,930 mm, total width: 2,280 mm, spindle nose: A2-8, overall weight: 9,100 kg, Equipment: documentation/manual, The Mori Seiki NZX 2500/1000Y is an extremely robust and versatile CNC turning machine, designed for companies that demand high levels of productivity, accuracy, and flexibility. The machine is equipped with a Y-axis, which, in addition to conventional turning operations, enables complex milling and drilling operations. In combination with powered tools, this offers extensive possibilities for completely machining workpieces in a single setup. The two turrets provide a large tool capacity and enable simultaneous operations. This makes the NZX 2500/1000Y particularly suitable for complex workpieces and series production. Additional options & accessories: - Double turret configuration (Turret 1 and Turret 2) - Y-axis - Powered tools - Interface for bar feeding - SMW Autoblok (SLU-X-2_ZS) hydraulic chuck - Renishaw measuring arm for tool measurement on Turret 1 and Turret 2 - High-pressure pump - HAINBUCH SPANNTOP nova Kombi Axfix Gr. 65 chuck - Various tool holders (powered and static) - All original Mori Seiki documentation Weight & dimensions: 9100 kg approx. 3930x2280x2574 mm (LxWxH) Chodpfx Apjz R T Exo Dod

Condition: ready for operation (used), Year of construction: 2018, operating hours: 25,500 h, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D-sl, number of slots in tool magazine: 24, number of axes: 8, This 8-axis EMCO Hyperturn 45 was manufactured in 2018. It features dual water-cooled integrated motor spindles with a maximum bar capacity of 45 mm and a powerful drive power of 15 kW for each spindle. The machine includes two 12-station radial tool turrets and a high-pressure coolant system. If you are looking to get high-quality turning and milling capabilities, consider the EMCO Hyperturn 45 turn-mill centre we have for sale. Contact us for further details. Chedo Ahzcispfx Ap Dsd - CNC Control: Siemens Sinumerik 840D-sl / OPERATE with 22" Multi-Touch Display, emcONNECT, IPC with 240 GB, and ShopTurn dialog programming- Operating Hours (Machine on): 25,304 h 09 min 43 sec- Operating Hours (Ready for operation / automatic mode): 22,788 h 54 min 36 sec- Operating Hours (Production mode): 21,003 h 11 min 32 sec- Total Alarm Time: 2,625 h 48 min 54 sec- Number of Spindles: 2 (Water-cooled integrated motor spindles for main and counter spindle)- Drive Power (Main Spindle): 15 kW- Drive Power (Counter Spindle): 15 kW- Speed Range (Main Spindle): 0 - 7,000 rpm- Speed Range (Counter Spindle): 0 - 7,000 rpm- Spindle Nose (Main Spindle): DIN 55026 KK 5- Maximum Bar Capacity: 45 mm- Spindle Nose (Counter Spindle): DIN 55026 KK 5- Axes: 6 linear axes, 2 rotary axes (C-axis on main and counter spindle, TRANSMIT software included)- Y-Axis Travel: mm- Y-Axis Rapid Traverse Rate: 15 m/min- Tool Carriers: 2x 12-station radial tool turrets VDI 25 with directional logic (for up to 2x 12 driven tool stations)- Driven Tools Power: max. 4 kW at 2,080 rpm- Driven Tools Torque: 16 Nm constant- Driven Tools Speed Range: 0 - 6,000 rpm- Linear Scales: Absolute direct linear encoders (HEIDENHAIN) with sealing air on X1, Y1, and X2 axes- Workpiece Handling: Pneumatic finished-part catcher HT45 (max. part length 120/180 mm, max. part diameter 45 mm, max. weight 2 kg) with indexed conveyor belt (storage area 340 x 750 mm)- Spindle Extension: For DM45, including 3 reduction tubes (allows short bars up to 1,200 mm through the spindle)- Mist Collector: Mechanical oil mist separator REVEN (RECOJET-2), air throughput 1,000 m³/h, 250 W, connection diameter Ø160 mm- Electrical Connection: 3x 400V / PE, 50/60 Hz, Imax = 60 A, Supply line fuse 80 A gG/gL, Icw

Condition: excellent (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, feed length X-axis: 535 mm, feed rate Z-axis: 3,845 m/min, turning diameter over cross slide: 630 mm, turning diameter: 950 mm, turning diameter over top slide: 630 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, total height: 1,850 mm, total width: 2,105 mm, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Spindle Bore: 254mm Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Chedpfxjz S Nc Uo Ap Ded Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret 2 x Fixed Steadies

Condition: excellent (used), Year of construction: 2017, operating hours: 700 h, functionality: fully functional, turning length: 710 mm, turning diameter over cross slide: 380 mm, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 190 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 710 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, total height: 1,825 mm, total length: 3,385 mm, total width: 1,760 mm, overall weight: 5,750 kg, Equipment: documentation/manual, TOUR CNC 4 AXES MAZAK MAZATROL SMOOTH C YEAR 2017 CHUCK DIAMETER: 210 mm MAX. MACHINING DIAMETER: 380 mm SPINDLE BORE: 76 mm BAR MACHINING: 65 mm SPINDLE SPEED: 5000 rpm TURRET TOOL SPEED: 5000 rpm 12-TOOL TURRET CHIP CONVEYOR ROBOT INTERFACE Code Agvadepfx Ap Djhd AUTOMATIC DOOR 3-COLOR LAMP MIST EXTRACTOR WEIGHT: 5750 kg 8 fixed tool holders 3 rotating tool holders

Condition: ready for operation (used), Year of construction: 2011, operating hours: 22,008 h, spindle motor power: 52,000 W, spindle speed (max.): 2,500 rpm, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 2,050 mm, total height: 2,670 mm, total width: 4,215 mm, overall weight: 24,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D sl, product length (max.): 7,601 mm, number of slots in tool magazine: 12, swivel angle B-axis (min.): -119 °, swivel angle B-axis (max.): 120 °, number of axes: 7, This 7-axis DMG CTX gamma 2000 TS was manufactured in 2011. It features a maximum turning diameter of 700 mm and a turning length of 2,000 mm. The machine includes impressive X1-axis travel of 650 mm and Z1-axis travel of 2,050 mm. If you are looking to get high-quality turning and milling capabilities, consider the DMG CTX gamma 2000 TS turn-mill centre we have for sale. Contact us for further details. Cedpfo Ah E Ecox Ap Djhd • Working area: • Swing diameter: 700 mm • Maximum turning diameter: 700 mm • Maximum turning diameter opposite spindle/tool holder: 400 mm • Spindle distance: 2,260 mm • Turning length: 2,000 mm • Maximum workpiece weight chuck/Weight of chucks: 250/150 kg • Maximum center of gravity distance of workpiece from spindle flange: 150 mm • Axis travels: • X1-axis travel: 650 mm • Y1-axis travel: 400 mm • Z1-axis travel: 2,050 mm • B1-axis travel: 240 degrees • X2-axis travel: 210 mm • Z2-axis travel: 1,910 mm • Z3-axis travel: 1,910 mm • Main spindle (ISM 102 plus): • Spindle flange diameter: 220h5 mm • Clamping cylinder diameter: 630 mm • Draw tube diameter: 102 mm • Spindle bore diameter: 118 mm • Front bearing diameter: 160 mm • Motor design: ISM 102 plus • Maximum spindle power (100% / 40% ED): 40 / 52 kW (53.6 / 69.7 hp) • Maximum spindle speed: 2,500 rpm • Nominal spindle speed: 225 rpm • Maximum torque (100% / 40% ED): 1,700 / 2,200 Nm (1,258 / 1,628 ft·lbf) • C-axis torque (100% / 40% ED): 2,500 / 1,850 Nm • C-axis angular resolution: 0.001 degrees • Tool slide / turret (with driven tools): • VDI tool clamping diameter (DIN 69880): 50 mm • Number of tools: 12 pcs • Tool shank: 50 mm • Maximum power (100% / 40% ED): 9.4 / 12.6 kW (12.605 / 16.887 hp) • Maximum torque (100% / 40% ED): 57 / 42.041 Nm • Maximum drive torque (100% / 40% ED): 24 / 30 Nm • Maximum speed (100% / 40% ED): 4,000 rpm • Tool change time: 0.4 / 0.7 s • Maximum unbalance weight of equipped tool: 180 kg • Permissible unbalance torque of tool assembly: 63 Nm Technical Specification Counter Spindle Yes Driven Tools Yes Taper Size HSK 63 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,709 h, spindle motor power: 5,500 W, spindle speed (max.): 6,500 rpm, overall weight: 2,750 kg, total width: 1,440 mm, total height: 1,760 mm, bar diameter (max.): 35 mm, travel distance Y-axis: 340 mm, controller manufacturer: FANUC, product length (max.): 2,060 mm, number of axes: 5, This 5-axis Hanwha XE35H was manufactured in 2022. It features a maximum turned diameter of 35 mm and impressive axis travels, including 312 mm in X (2) and 340 mm in Y. The machine is equipped with a maximum main spindle speed of 6500 rpm and a tool capacity of 21. If you are looking to get high-quality turning capabilities, consider the Hanwha XE35H swiss type turning machine we have for sale. Contact us for further details. Chedpfx Apo Ahq Aas Djd • Maximum turned diameter: 35 mm • Axis travels: • X1: 62 mm • X2: 312 mm • Z1: 210 mm • Z2: 205 mm • Main spindle: • Power: 2.2/5.5 kW • Sub spindle: • Max speed: 6500 rpm • Power: 1.5/2.2 kW • Number of tools: 21 • Tool shank: 16 x 16 mm • Cross slide speed: 6000 rpm • Cross slide power: 1.0 kW • Coolant tank capacity: 170 litres • Coolant pump power: 0.4 kW • Power consumption: 15 kVA • Air flow rate: 120–150 litres/min Technical Specification Counter Spindle Yes

Year of construction: 2017, operating hours: 29,259 h, condition: used, spindle speed (max.): 5,000 rpm, turning length: 500 mm, CNC Lathe Manufacturer: DMG MORI Type: CTX beta 500 Year of manufacture: 2017 Control system: Heidenhain CNC-Pilot 640 Codpfx Aj Ahkfnjp Dohd Technical data: Turning length: 500 mm Spindle speed: 5,000 rpm Drive power - main spindle: 100/40% duty cycle (ED) 25/34 kW Tool interface: VDI 30 Number of tool stations: 16 positions Operating hours: approx. 29,259 h Spindle hours: approx. 7,351 h Condition: Used Technical features & accessories: - C-axis and spindle brake (hydraulic) - Y-axis ± 60 mm - Programmable tailstock - Hydraulic hollow clamping device, Ø 77 mm - Differential pressure clamping for the main spindle - 16-station disc-type turret, driven tools for all 16 stations - Coolant system 8/20 bar - Belt filter unit (filtration fineness 40 µm) - Level monitoring - Connection port for oil mist separator - Coolant spray gun - TurnPlus Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: used, Year of construction: 2000, 3 Muratec machines 1 MURATEC MT12 CNC lathe Dual spindle, dual turret Year: 1999 + 1 STAUBLI RX90 robot with control center 1 Muratec MT12 CNC lathe with dual spindle and dual turret 4 axes Year: 2000 1 BOSS 542/32 CNC loading system 1 Muratec MT12 CNC lathe with dual spindle and dual turret Fanuc CNC Csdpfs Aggc Ssx Ap Dehd Year: 1999 Supplied with all tooling and tool holders.

Condition: like new (used), Year of construction: 2016, operating hours: 9,300 h, machine/vehicle number: IntNr231649, For sale is a very well-maintained TORNOS Swiss GT 13-8 CNC Swiss-type automatic lathe, manufactured in 2016, with only approximately 9,300 operating hours. Technical Data – TORNOS Swiss GT 13-8 Manufacturer: TORNOS Model: Swiss GT 13-8 Chodpfx Ape Ahq Tco Ded Machine Type: CNC Swiss-type automatic lathe Year of Manufacture: 2016 Control System: FANUC 31i-B Number of CNC Axes: 8 Number of Spindles: 2 Operating Hours: approx. 9,300 h Condition: very good Main Spindle Max. bar diameter: 13 mm Max. machining length: approx. 190 mm Max. spindle speed: 15,000 rpm Spindle drive power: approx. 4 kW C-axis Counter-Spindle Max. machining/clamping diameter: 13 mm Max. speed: 15,000 rpm Drive power: approx. 4 kW C-axis resolution: 0.001° Tool Carrier 1 8 tool positions Speed of driven tools: up to 6,000 rpm Drive power: approx. 1 kW Tool Carrier 2 8 tool positions Speed of driven tools: up to 6,000 rpm Drive power: approx. 1 kW Front machining Up to 4 tool positions Rear/Opposite-side machining Up to 8 tool positions Of which, up to 4 are driven positions Speed of driven tools: up to 6,000 rpm Drive power: approx. 0.75 kW Tool holder package is charged separately! TORNOS Robobar SBF 213 bar feeder High-pressure coolant system, type: HP-20-140 Kraft & Bauer fire extinguishing system ELBARON oil mist separator Supply voltage: 400 V The machine can be inspected under power by prior appointment. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2020, operating hours: 895 h, travel distance X-axis: 275 mm, travel distance Z-axis: 1,250 mm, number of axes: 2, Horizontal turning machine manufactured in 2020. This DMG MORI CLX 550 features a Z-axis travel of 1,250 mm and an X-axis travel of 275 mm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 machine we have for sale. Contact us for further details. - Operating Hours (B/h): approx. 4,888 h- Working Hours: 895 h- Standard CLX 550 Kinematics & Travel Specifications: - X-axis Travel: 275 mm - Z-axis Travel: 1,250 mm Technical Specification Counter Spindle No Cedpfx As Ahrdbsp Dohd Driven Tools No

Condition: good (used), Year of construction: 2015, Ref. -No.: 10716 Manufacturer: DMG MORI Type: CTX alpha 500 Year of construction: 2015 Type of control: CNC Control: Siemens 840D Csdpfxo Ahw R Ej Ap Dshd Storage location: Halberstadt Country of origin: Germany Machine-No.: 004xxxxx Tool holder type: VDI 30 X stroke: 260 mm Z - stroke: 550 mm Bar passage: 65 mm Turning Diameter: 500 mm Turning Length: 520 mm Spindle Speeds: 5.000 RPM Spindle Bore: 76 mm Tool changer: 12 Pcs Operating hours: 38.500 Hours Weight Of The Machine Ca.: 4.8 t Further information: Including chip conveyor, transport securing equipment, documentation and accessories. The machine has been cleaned and can be inspected under power.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 6,872 h, spindle motor power: 7,500 W, spindle speed (max.): 7,000 rpm, overall weight: 4,300 kg, total width: 1,440 mm, total height: 1,865 mm, bar diameter (max.): 65 mm, controller manufacturer: FANUC, controller model: Series 31i-MODEL B5, product length (max.): 3,320 mm, number of axes: 11, This 11s STAR MICRONICS SV-38R type B was manufactured in 2015. It features a maximum turning diameter of 38 mm and a maximum headstock stroke of 350 mm. The machine is equipped with a FANUC Series 31i-MODEL B5 CNC control and offers rapid traverse speeds of up to 30 m/min. If you are looking to get high-quality turning capabilities, consider the STAR MICRONICS SV-38R type B swiss-type CNC sliding-headstock automatic lathe we have for sale. Contact us for further details. • Axis diagram: X1, Y1, Z1, X2, Y2, Z2, X3, Y3, Z3, B3, C1, C2 • Machining capacity: • Max turning diameter: 38 mm • Max headstock stroke: 350 mm • Rapid traverse: X1/X2/X3/Y1/Z1/Z2/Z3 30 m/min; Y2 20 m/min; Y3 15 m/min • Main spindle: • C-axis control • Motor power: 7.5 kW continuous / 11 kW (10 min, 25% duty) • Main spindle collet • Synchronous rotary guide bush with air blow • Sub-spindle: • Max speed: 7,000 rpm • C-axis control • Motor power: 5.5 kW continuous / 7.5 kW (10 min, 40% duty) • Sub-spindle collet • Air blow • Tooling system: • 5-position gang tool post • 10-position tool turret • 8-spindle back-working unit • Front drilling: 3 tools per station • Max drilling diameter: 23 mm • Max tapping capacity: M16 × 2.0 • Driven tooling: Codpfe Agmnzox Ap Dehd • Gang tool post: 4 driven positions; max speed 6,000 rpm; motor 2.2 kW • Turret: 2 driven tools per station; max speed 5,700 rpm; motor 2.7 kW continuous / 4 kW (5 min, 30% duty) • Max drilling diameter (driven): 10 mm • Max tapping capacity (driven): M8 × 1.25 • Built-in/standard equipment: • Cut-off tool breakage detection • Automatic central lubrication • Hydraulic unit • Pneumatic unit • Coolant level indicator • Leak detection switch • Work area lighting • RS-232C interface Additional equipment • Bar feeder: FMB Maschinenbau, model FMB turbo 5-55 / 3200 A (Year 2016) • Max bar length: 3,200 mm • Bar diameter range per supplied spec: 5–65 mm (to be confirmed with feeder documentation) • Feed speed: 0–1,000 mm/s; Return speed: 0–1,000 mm/s • Bar feeder interface • Note: Actual machining diameter limited by lathe to 38 mm • Finished parts conveyor Additional information • The machine is fully operational and does not require any repairs. • The machine has only been used to process brass. It has never been involved in a collision. Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2016, 2016 Tornos DT 26 Swiss Type CNC Sliding Head Lathe With Fanuc Series 31i-Model B Control & SBF326-3.2M Bar Feeder Maximum Bar Ø25.4mm. Rapid Traverse 32m/min. Standard Workpiece Length With Guide Bush 225mm. Standard Workpiece Length Bushless 50mm. Main Spindle- Spindle Speed Range 0-10,000rpm (10.5kW Motor). Maximum Turning Tools 6 (Shank 12 x 12mm.). Number Of Frontal Tools (Main-Operation/Counter-Operation) 4/4. Max Front Drilling Ø12mm, Max Front Tapping M10 x 1.5.Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter Spindle-Maximum Bar Ø25.4mm. Main Spindle- Spindle Speed Range 0-15,000rpm (5kW Motor). Max Insertion Length Of Workpiece Into Counter Spindle 100mm. Max Standard Length Of Workpiece 120mm. Max Back Drilling Ø10mm, Max Back Tapping M6 x 1. Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter-Operation-Max Number Of Tool Positions 8, Max Rotating Tool Speed 7,200rpm (1kW Motor). S/No. 2581050017 (2016). Please note a loading charge of £200 + VAT to be added to buyer's invoice. Cjdpfx Apsz H U I Re Djhd With Coolant System, Hennig Chip Conveyor, Krauft Bauer Fire Suppressor Unit, SEI Mist Extraction Unit, Parts Catcher, Parts Conveyor, Signal Tower, Tool Kit, Cromar Swarf Bin & Manuals. Overall Dimensions L2,230 x W1,250 x H1,730mm. Weight 2,400kg.

Condition: good (used), Year of construction: 2011, functionality: fully functional, DMG Gildemeister CNC turning machine MSL 42|7 Year of manufacture: 2011 Cedpfx Apj Ah Hk Nj Djhd TECHNICAL DETAILS - Control system: Fanuc 31i - Spindle bore: 46 mm - Max. bar diameter: 42 mm - Main spindle speed (max.): 5,000 rpm - Tool holder positions: 6 - Machine weight: 3,500 kg Bar feeder FMB Turbo 5-55 / 3200 / A Year of manufacture: 2008 Bar diameter: 5 - 55 mm Bar length: 3200 mm Accessories: - FMB bar feeder Turbo 5-55 (bar length up to 3,200 mm) - KSS coolant supply / cooling unit - Chip conveyor