Used Workshop presses for sale (171)

Condition: new, pressure 20,0 t stroke 185 mm table surface area 170 mm Breite column travel between the guideways 510 mm weight of the machine ca. 112 kg dimensions of the machine ca. 1630 x 560 x 730 mm Furnishing: Colnjlki E To U Stgogt - Standard with pressure cylinder that can be moved to the left and right - For aligning, pressing, bending, assembling gears, discs, etc. - Standard with foot pedal and hydraulic hand pump for piston delivery - Standard with support prism for aligning shafts - With automatic piston retraction by integrated return spring as standard - Height-adjustable press table with locking bolts - Large manometer for reading the compressive force - Including two-stage hydraulic pump - Robust construction with welded steel frame

Condition: new, pressing force: 100 t, cylinder stroke: 300 mm, – Capacity 100 tons – Cylinder stroke 300 mm – Working width 1070 mm – 2 speeds – With V-blocks/pressure plates Csln U Sswg Smijtgogt – Pressure gauge – Emergency stop – Documentation – 400 V

Condition: good (used), Used workshop press from top brand Enerpac Cgsln U Stewc Nluegjt Type: RP 100 Capacity: 100 tons

Condition: new, This 60 ton motorized workshop press has a movable cylinder (left-right) and a height-adjustable work table. Equipped with pressure control, 2 speeds, a joystick and a hand pump for precise pressing tasks. Made in Europe 60 ton workshop press electrically operated, manuf. RHTC – type M/H-M/C-2 This 60 ton motorized workshop press has a movable cylinder (left-right) and a height-adjustable work table. Equipped with pressure control, 2 speeds, a joystick and a hand pump for precise pressing tasks. The workshop press is produced in the Netherlands. Features Sliding cylinder (left-right) Integrated pressure gauge Pressure regulator Two-speed hydraulic unit Height-adjustable work table Joystick for cylinder operation Hand pump for precise press work Cgoln U Sowfcq Nstgot Options: Foot pedal or hand remote control for operating this 60 ton workshop press V-block set for additional support

Condition: new, Year of construction: 2024, pressure 60 t stroke 400 mm table surface area 800 x 500 mm feed down 4,03 mm/sec feed up 5,82 mm/sec column daylight 820 mm oil pressure max. in the work cylinder 400 bar oil volume 26 l voltage 400 V / 50 Hz total power requirement 3 kW weight of the machine ca. 0,55 t dimensions of the machine ca. 1,5 x 0,9 x 2,1 m • unused workshop press, Cgoln Uovcrmvo Stget • manual and hydraulical operation, • Pressure cylinder moveable horizontally, • Working table hydraulical adjustable, • Cylinder Ø 150 mm, piston base Ø 85 mm.

Condition: used, Pressing force: 6 t Csln U Sjwffi Uetgogt

Condition: new, Year of construction: 2025, TECHNICAL DATA Pressing force 30t max. load prism jaw 7.5t Cgslei Amnpen U Stgst piston stroke 160mm piston travel 550mm Dimensions and weights length (product) approx. 1240mm width/depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear width 790mm Installation height max. 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot lever Winch for lifting and lowering the table Location: Ex works - available at short notice -

Condition: new, pressing force: 60 t, – Capacity 60 tons – Cylinder stroke 250 mm – Working width 1040 mm – 2 speeds – With V-blocks/pressure plates – Pressure gauge – Emergency stop – Documentation Celn U Stjwgy Rcsgjgt – 400 V

Condition: new, pressure 200 t stroke 400 mm daylight longitudinal/sideways 1300 /450 mm dayligth 900 mm tank capacity 75 l liter capacity 22 l Cgolefm T Hgon U Stgot feed down 6,9 mm/sec feed up 12,6 mm/sec Motor output 7,5 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,0 x 0,75 x 2,8 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking 2 year guarantee

Condition: new, This series of hydraulic workshop presses with motor drive are designed with a stable portal with adjustable, open support table and are suitable for applications such as pressing in and out bearings, for assembly and straightening work or for testing workpieces. The laterally positionable working cylinder facilitates set-up without the workpiece having to be moved. These presses are almost indispensable in technical workshops and maintenance departments. Cjln Uouzla Do Stgogt

Condition: used, Year of construction: 2007, pressure 100 t stroke 500 mm table surface area 900 x 600 mm rapid traverse 22 mm/s stroke speed 2 mm/s ram surface 700 x 350 mm Colsvprv Rsn U Stgjgt total power requirement 2,2 kW weight of the machine ca. 1,6 t dimensions of the machine ca. 1,9 x 0,85 x 2,3 m The machine is of the Italian make SICMI, which was traded by the Knuth company.

Condition: used, Year of construction: 2023, pressure 60.0 t stroke 250 mm table surface area 1040 x 370 (315) mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 4.0 mm/sec return speed 10.0 mm/sec engine output 4.0 kW weight of the machine ca. 800 kg. dimensions of the machine ca. 1.700 x 700 x 2.100 mm Exhibition machine from 2023 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins Celsixmzxsn U Stgjgt * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: new, pressing force: 100 t, - Capacity 100 tons - Cylinder stroke 400 mm - Working width 1000 mm - Pressure gauge Cgoln U Sswfnqzotget - Emergency stop - 400 V

Condition: new, This series of hydraulic workshop presses with motor drive are designed with a stable portal with adjustable, open support table and are suitable for applications such as pressing in and out bearings, for assembly and straightening work or for testing workpieces. The laterally positionable working cylinder facilitates set-up without the workpiece having to be moved. These presses are almost indispensable in technical workshops and maintenance departments. Cgolnsuzlaqo U Stgjt

Condition: used, Year of construction: 2024, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed Cgelsixmz Hen U Stgot - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, pressing force: 30 t, cylinder stroke: 300 mm, - Capacity: 30 tons Cgsln U Sswd I Htstgjt - Cylinder stroke: 300 mm - Working width: 700 mm - Pressure gauge - Emergency stop - 400V

Condition: new, This series of hydraulic workshop presses with motor drive are designed with a stable portal with adjustable, open support table and are suitable for applications such as pressing in and out bearings, for assembly and straightening work or for testing workpieces. The laterally positionable working cylinder facilitates set-up without the workpiece having to be moved. These presses are almost indispensable in technical workshops and maintenance departments. Cgsln U Steuyiigegot

Condition: used, Year of construction: 2021, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm Cgelnjixmz Rj U Stgst ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2021 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: new, distance between stands: 2,000 mm, cylinder stroke: 400 mm, - Capacity 100 tons - Cylinder stroke 400 mm - Working width 2000 mm - Electric or manual operation - Pressure gauge - Emergency stop - 400 V Celn U Sjwbutujtgsgt

Condition: new, These manual hydraulic workshop presses are built in Europe and are suitable for general assembly and straightening work or for testing workpieces. They enable safe and professional work and are mainly used in mechanical workshops, garages and locksmiths. Cgeln Usuyh Two Stgjt

Condition: new, pressing force: 10 t, - Capacity 10 tons - Cylinder stroke 600 mm - Pressure indicator Coln U Stegwxm Hegogt - Emergency stop - 400V

Condition: new, These manual hydraulic workshop presses are built in Europe and are suitable for general assembly and straightening work or for testing workpieces. They enable safe and professional work and are mainly used in mechanical workshops, garages and locksmiths. Coln U Souyh Sgjtgjgt

Condition: new, This series of hydraulic workshop presses with motor drive are designed with a stable portal with adjustable, open support table and are suitable for applications such as pressing in and out bearings, for assembly and straightening work or for testing workpieces. The laterally positionable working cylinder facilitates set-up without the workpiece having to be moved. These presses are almost indispensable in technical workshops and maintenance departments. Cslneuyh A Ee U Stgsgt

Condition: as good as new (ex-display), This series of hydraulic workshop presses with motor drive are designed with a stable portal with adjustable, open support table and are suitable for applications such as pressing in and out bearings, for assembly and straightening work or for testing workpieces. The laterally positionable working cylinder facilitates set-up without the workpiece having to be moved. These presses are almost indispensable in technical workshops and maintenance departments. Cgsln U Stsuyg Adeget

Condition: new, These manual hydraulic workshop presses are built in Europe and are suitable for general assembly and straightening work or for testing workpieces. They enable safe and professional work and are mainly used in mechanical workshops, garages and locksmiths. Cgsln Uoncdu Ne Stgot