Used Tensile Test for sale (11,252)

Condition: good (used), Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Vötsch VCS 7034-5 Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation temporal K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Ijdpoxbrkhofx Aacjbc Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 1999, condition: not inspected (used), For sale is a built-in salt spray chamber/corrosion test chamber from Weiss Technik, type: SC/KWT 450 The system must be cleaned and serviced before use. The system can be inspected on site, shipping is possible. Manufacturer Weiss Technik B2misngk99 Type: SC/KWT 450 Test chamber capacity: 480 l Max. load: 100 kg Brine storage tank: 180 l Ibodoxfzttopfx Aacjc Corrosion tests: Salt spray test: Room temp. up to +50 °C Babumc3umw Condensation water test: Room temp. up to +45 °C Voltage: AC 230V Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014

Year of construction: 2011, operating hours: 3,210 h, condition: excellent (used), Climate test chamber, climate chamber, temperature test chamber WKL 34/40 by Weiss Umwelttechnik Test chamber volume approx. 34 liters Internal dimensions approx. 340 x 310 x 280 mm 1 shelf Test chamber lighting: halogen Power: 1.8 kW, 230 volts 0.8 kg refrigerant R404A Temperature range: -40 to +180°C Ibjdpjw U U Nhjfx Aacjc Humidity range: 10 to 98% rH Water tank for 13 liters of demineralized water Simpati control system, color touch display Test programs in automatic mode or manual for temperature and humidity only CE mark Very well-maintained heating chamber from prototype production in the motorsport department of a Wolfsburg-based automobile manufacturer. Only 3,210 operating hours. Unfortunately, no key available. Dimensions approx. 580 x 950 x 980 mm (L x W x H). Weight approx. 190 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse; see 'More offers from this seller.'

Condition: used, PCB test device with contact pin testing, ELABO 99-9Z ZM 107011 test system Test system for single-sided testing of SMD PCBs Ibjdpoxcivqofx Aacsc Manufacturer: ELABO Model / Type: 99-9Z ZM 107011 Serial No.: SN0064623 Year of manufacture: 2004 Without two-hand control panel The machine originates from a production shutdown. You will receive the machine exactly as pictured, without any functional guarantee. For your safety and ours: Please make sure to take advantage of the opportunity for inspection.

Condition: used, Description: Emission Test Chamber Manufacturer: Vötsch Model: VCE 200 Test chamber volume: 200 liters Temperature range: +20°C to +130°C Humidity range: 30 to 95% RH Temperature deviation: temporal ± 0.3 K Temperature deviation: spatial ± 0.5 K Average temperature change rate: cooling approx. 0.3 K/min, heating approx. 0.4 K/min Dew point range: +5°C to 60°C Humidity deviation: temporal ± 1 to 3% RH Voltage: 3/N/PE AC 400V±10% 50Hz Rated power / rated current: 21 kW / 41 A Refrigerant: R404A Internal test chamber dimensions: 610 x 610 x 560 mm (W/D/H) Overall dimensions: 1250 x 1700 x 2350 mm (W/D/H) Weight: approx. 750 kg Item Condition: Used item as shown in the pictures Please contact us if you have any questions Shipping: The quoted shipping costs apply to deliveries within Germany Worldwide shipping available (please inquire for shipping costs outside Germany) The given shipping costs apply to shipping within Germany Sale exclusively to business customers, without warranty or guarantee. Ibedpfxjxg Hrqo Aacsc Deviations from technical data and errors in the item description may occur and are reserved.

Year of construction: 1990, condition: good (used), Offer 25223 Technical data: (non-binding) - Test panel for wall mounting with various test devices - Space requirement: W 600 x H 850 x D 300 mm Iodpfewu Sxnex Aacebc - Weight: 40 kg

Condition: excellent (used), Vötsch Type: VT 3050-M Vötsch Subassembly Test Chamber Lifetimetester, Air-cooled Vötsch VT 3050-M Temperature Test Chamber / Climatic Chamber 500 Liters For sale is a used Vötsch VT 3050-M temperature test chamber (500 L internal volume). It is ideally suited for temperature tests in research, development, industry, or quality assurance. Features: - Durable stainless steel interior - 1 shelf included - Cable port (Ø 80 mm) - Interior lighting - Mobile on casters - Safety functions (thermal limiter, etc.) Technical data: Manufacturer: Vötsch Model: VT 3050-M Internal volume: 500 L Temperature range: –30 °C to +100 °C Internal dimensions (W × D × H): approx. 710 × 590 × 1250 mm External dimensions (W × D × H): approx. 940 × 1030 × 1955 mm Heating/cooling rates: approx. 2 K/min (heating), 1.4 K/min (cooling) Max. heat compensation: 650 W Control: modern touchscreen panel (multi-language), Ethernet port Ibedpfexbrffex Aacec Power supply: 1/N/PE AC 230V+10% 50Hz Rated power: 2 kW Rated current: 12 A Refrigerant: R-404A Weight: approx. 350 kg Important buyer information for your safety: The following procedures are carried out on all chambers offered by us prior to sale: 1. Functional inspection and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, a documented trial run of the chambers is performed. Condition: used Scope of delivery: (see picture) (Specifications may be subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: used, table clamping surface: 228 x 273 mm 3 T-slots: 12 mm in between 4 x 4 threaded holes: M 8 table height at zero position: 146 mm Space requirement: 250 x 290 mm Ibedjbbgcxspfx Aacec Weight: 41 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, For sale is a used, fully functional Dynapack DAQ54 chassis dynamometer with direct wheel hub connection. The system was purchased in March 2019 and has completed approximately 300 test cycles since – always carefully maintained and in excellent condition. The test bench comprises four mobile measurement units that are mounted directly to the vehicle's wheel hubs (after removing the wheels). Operation and data evaluation are handled via the included control unit with original software. Technical specifications: Max. measurable power: 3,000 hp / 2,200 kW (up to 1,500 hp / 1,100 kW per axle) Supports front-, rear-, and all-wheel drive Iodswuqwvopfx Aacjbc Stationary or mobile operation (entire unit fits in a van) System advantages: - Precise power measurement via direct force transfer – no slippage, no friction losses - Maximum safety: No risk of tire blowouts or vehicle movement - Flexible deployment: Quick reconfiguration and compact design, also ideal for mobile use - Perfectly suited for tuning, development, and performance diagnostics Feel free to ask further questions. Inspection and testing are possible by arrangement.

Condition: used, Universal Static Material Testing Machine AllroundLine with Two Test Spaces Iedpfx Aajxantcjcsbc Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type 1474 / 01 Year of manufacture: 1984 / 2003 Type: 01 . 96255/03 . 112137 Design: Universal Testing Machine Test force: 100 kN (10 t) Test area height: 1460 mm Test area width: 430 mm Traverse path max.: 1200 mm Test speed max.: 250 mm/min Power supply: 400 Volt, 50 Hz (L1/PE/N) Rated current: 10 A Motor power: 4.4 kW Interface: RS485 - Control system retrofit in 2003 - For tensile, compression, and bending tests on material samples, components, and assemblies - Data output via RS485 - 1 load cell for measuring compressive and tensile forces included. The machine is sold without PC and software; only the installed load cell is included in the scope of delivery. Required floor space (W x D x H): 1150 x 800 x 1960 mm Weight: 820 kg Good condition

Condition: good (used), Climatic Test Chamber +10°C to +90°C, Air-Cooled The test chamber is designed and built for climatic testing within its operating range. Test procedures that determine the influence of temperature and humidity on material properties and functional reliability of the test specimen can be performed. The test chamber can be operated in manual mode (fixed-value mode) or automatic mode. The EDIT program can be used to program extensive climatic tests and save a maximum of 99 test programs. These test programs are run in automatic mode. The test chamber can be controlled during operation via the RS 232 interface with a computer and the TSI software or in ASCII mode. The operating temperature limiter protects the test specimen from excessively high temperatures. To protect the test specimen, the upper and lower temperature limits can also be set on the terminal. Manufacturer: Heraeus Vötsch Type: VC 0033 Specifications for temperature tests: Temperature range: +10°C to +90°C Humidity range: 30 - 95% Ijdpfjxbnkwox Aacobc Rated voltage: 230V +6/-10% 1/N 50Hz Rated power: 2.7 kW Rated current: 12 A Refrigerant: R 404A Test chamber volume: approx. 333 liters Humidity range: Humidity range for normal operation (ranges 1 and 3) with a dew point limitation of +5°C Humidity range 3 is omitted if additionally equipped with a capacitive humidity measurement system Tolerances for standard climate conditions 23°C/65% RH Temperature ±0.1 K Humidity < ±1.5% 85°C / 85% RH Temperature ±0.1 K Humidity

Condition: used, total surface approx. 33,54 m² 6 plates 2,000 x 1,290 mm Ibodpfx Aoc S R H Njacsc width of T-slots 30 mm thickness of the plates 95 mm weight approx. 1,700 kg per plate - price per plate -

Condition: excellent (used), Heraeus Vötsch Type: VTV 7060-5 Vibration and More ... ... Dynamic and Climatic Reliability Testing Heraeus Vötsch Temperature Test Chamber, Water-Cooled (with chamber feed-through for shaker for vibration testing) Easily test tall samples With the electrically adjustable height of the test chamber, you can easily test even extra-tall test specimens. On-site adaptation to the final shaker height is possible. Standard features, perfect down to the last detail: - Operating terminal with color touch panel - Microprocessor monitoring and control S!MCON/32*-NET - Digital I/O, potential-free - Independent, adjustable temperature limiter tmin/tmax - Adjustable software temperature limiter min./max. - Serial interface RS 232 - Volt-free contact for specimen deactivation - Water-cooled refrigeration unit - Calibration at 2 temperature points - Removable chamber floor with feed-through - 2 pipe ports Ø 50 mm and Ø 125 mm Vötsch Temperature Test Chamber VTV 7060-5 Test chamber volume: 600 liters Temperature Testing Performance: Temperature range: -70/+180 °C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Temperature change rate, heating: 6.0 K/min Temperature change rate, cooling: 6.0 K/min Heat compensation at +20 °C: 5000 W Heat compensation at -20 °C: 5000 W Test chamber dimensions: Width 800 mm, Depth 800 mm, Height 950 mm External dimensions: Width 1225 mm, Depth 2890 mm, Height 2150 mm Ibedpoxbgcrofx Aacec Height to lower edge of chamber floor min/max: 660/1380 mm Feed-through for vibration system: 710 mm Ø Feed-through for vibration system: 700/700 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 14 kW Rated current: 26 A Sound pressure level - 1 m in front: 75 dB(A) Refrigerant: R-404A / R-23 Weight approx. 650 kg Important information for your peace of mind as a buyer! The following points are carried out on our offered chambers before delivery: 1. Function check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Delivery scope: (see picture) (Specifications and subject to change, errors and omissions excepted!) For further questions, we are happy to answer your queries by phone.

Condition: used, Static Universal Testing Machine AllroundLine with two test chambers Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type AllroundLine Z010 / TH2S Year of manufacture: 1996 Model: BZ010TH2S . 132583/96 . 406678 Design: Benchtop testing machine Test force: 10 kN (1000 kg) Test chamber height: 1458 mm Test chamber width: 440 mm Crosshead speed: mm/min Drive travel resolution: 0.0625 µm Repeatability accuracy: ±2 µm Motor power: 500 W Power supply: 230 Volt, 50 Hz Rated current: 3 A Power consumption: 800 VA Interface: RS485 - For tensile, compression, and bending tests on material specimens, components, and assemblies - Equipped with TH2S control unit (machine controller) - Data output via RS485 - 1 piece load cell for measuring compression and tensile forces, AST Type KAF-W (Angewandte System Technik GmbH, year 2013) The machine is sold without PC and without software, only the described load cell is installed. Iodjxanrxspfx Aacebc Space requirement (W x D x H): 1000 x 650 x 1920 mm Weight: approx. 220 kg Good condition

Condition: good (used), Weiss Climatic Test Chamber with Seat Pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test Chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Capacity: 1440 liters Outer casing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint finish: Light gray (RAL 9002) Ibedpexbgrgsfx Aacoc Double-leaf door: hinged on the left and right Equipment: Tubing in the floor and ceiling: 2 each, NW 100 mm, for installing the pulsator tables Tubing in the the side walls: 1 each, left and right, 100 mm Cooling unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS Windows Performance data: Temperature range without air conditioning: +20...+100 °C Temperature stability without air conditioning: +0.2 ... t0.5 K (over time) depending on the range, in steady state Temperature range with air conditioning: 20...+95 °C Temperature stability with air conditioning: +0.2 ... +0.5 K (over time) depending on the range, in steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH depending on the range, in steady state Temperature change rate measured in the exhaust without a test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C ⁃ Heating: 0.5 K/min. On average, between +20 and +100 °C The performance specifications refer to an ambient temperature of max. +25 °C and the specified nominal voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Seat test device with steel construction for placing and attaching to the climatic test chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for changing test specimens, 12 weights of 5 kg each • 1 base frame in mild steel welded construction for attaching to the underside of the climatic test chamber. This frame is equipped with removable panels on all sides and has two hinged doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric discs with bearings and tachometer, 2 connecting rods, 2 ball bearings, • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for attaching the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for attaching the buttocks simulation • 2 stainless steel 60° load rods (The connection to the test specimen is not included in our price, but can be offered subsequently upon precise specification.) • 2 three-phase motors, 2 belt drives with tensioning devices, • 1 pneumatic control unit with 2 manual valves, a filter-regulator unit, and a shut-off valve. 1 electrical control cabinet with 2 SEW frequency converters, hand switches, emergency stop button, 2 on/off switches, 2 speed indicators, 2 potentiometers for speed adjustment, 2 pre-selected load changers with zero position and shutdown. Technical specifications: Frequency: 100-1000 strokes/minute Load: 2 x 45 g Stroke: 0-40 mm Load from above: 450 N each You can find more items - new and used - in our shop! International shipping costs upon request!

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber Iodpfsxbd Rasx Aacsbc (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: excellent (used), CTS Climate Test Chamber Type: C -40/600, Air-Cooled (converted to R-452a refrigerant) Test chamber volume: 600 liters Temperature tests: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time (at stabilized condition) - Average temperature rate of change (without test load and radiant heat): - Heating: 2.5 K/min - Cooling: 3.0 K/min - Maximum radiant heat input: 2500 W at +20°C Climatic tests: - Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Chamber internal dimensions (approx.): Height: 850 mm, Width: 850 mm, Depth: 830 mm External dimensions (approx.): Height: 1900 mm, Width: 1115 mm, Depth: 1850 mm Refrigerant: R-452A Power connection: 400V 3/N 50Hz Ibsdjw U Awmspfx Aacsc Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for your purchase! The following checks and procedures are performed on all our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: like new (used), Atlas Xenotest Type: Xenotest Beta+ Weathering Test Instrument XENOTEST BETA+ – Material Testing Device / Weathering Tester with Humidification and Spraying System For sale is a professional XENOTEST BETA+ weathering tester from ATLAS Material Testing Technology GmbH. This device is designed to simulate sunlight, weather, and climatic influences and is used worldwide in research, quality control, and material testing. Features: - Professional equipment for UV and weather resistance tests - Ideal for laboratories, industry, and quality assurance - Fully functional, including comprehensive technical documentation Technical Data & Features: - Weathering and lightfastness testing unit with three air-cooled xenon lamps - XENOCHROME filter systems (300 / 320) for spectral distribution adjustment - Humidification and spraying system (ultrasonic humidifier, spray rods) - Measuring system with XENOSENSIV sensor for irradiance and black standard temperature measurement - Integrated touchscreen display for control and programming - Pre-installed standard tests (e.g., ISO 11341, ISO 4892-2, ISO 105-B02/B06), as well as freely programmable test procedures Iedsw Thykepfx Aacebc - Documentation capability via integrated printer (paper rolls) - Water reservoir (approx. 40 liters, for demineralized water) - Dimensions: approx. 900 × 1200 × 1800 mm (W × D × H) - Weight: approx. 400 kg - Power supply: 400 V (CEE 32 A, 5-pin) Condition: used Scope of delivery: (see image) (Specifications and technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Vötsch "Headlight Test Bench – Weiss/Vötsch VCS³ 4100-5-S (Indoor & Outdoor), available from calendar week 40" Year of manufacture: 2018 For sale is a complete temperature and climate testing system for front headlights, consisting of two coupled Vötsch VCS³ 4100-5-S climate test chambers (indoor & outdoor versions). The system was specially developed for the automotive industry and enables combined environmental testing to OEM standards. Main Features - Temperature and climate testing - Rain/spray simulation (flow rate 1–18 l/min, spray temperature 5–32 °C, 200 l tank) - Infrared irradiation (4 × 1.2 kW) for solar load simulation Ibsdpfow S Ilkjx Aacoc - Vacuum unit (0–50 Pa) for leak testing - Airflow up to 15 m/s (driving wind simulation) - Real-time webcam monitoring - Comprehensive sensor suite (temperature and humidity sensors) - Additional power supplies for test specimens (12–48 V) Outdoor chamber (VCS³ 4100-5-S Outdoor): - Temperature range: –20 … +80 °C - Heating rate: 5 K/min | Cooling rate: 3 K/min - Humidity range: 4 … 95% rH - Dew point range: –30 … +79 °C - Extras: webcam, 5 temperature sensors Indoor chamber (VCS³ 4100-5-S Indoor): - Temperature range: –20 … +125 °C - Heating rate: 8 K/min | Cooling rate: 5 K/min - Humidity range: 4 … 95% rH - Dew point range: –30 … +88 °C - Vacuum unit: 0 … 50 Pa - Airflow: 0 … 15 m/s - Extras: 4 power supplies (12–48 V), 3 temperature sensors, 2 humidity sensors Application areas Ideal for testing headlights and similar components under real-world conditions. Suitable for use in automotive development, quality assurance, approval tests, and durability testing. Weight estimation (approximate) - 2× Vötsch VCS³ 4100-5-S base units: approx. 2 × 840 kg = 1,680 kg (typical catalog value per unit). - Additional equipment/peripherals (rain, IR, vacuum, airflow, control cabinets, cabling, partition wall): approx. +400 to +900 kg. - Water in tank (200 l): +200 kg during operation. - Transport “dry” (empty tank): approx. 2.1–2.6 t - Operation “wet” (full tank): approx. 2.3–2.8 t - Summary: approx. 2.1–2.8 t Scope of delivery - Vötsch VCS³ 4100-5-S indoor chamber - Vötsch VCS³ 4100-5-S outdoor chamber - Partition wall for VCS³ 4100-5-S - Dimensions: Height × Width = 80 × 80 cm - Rain/IR/vacuum/airflow units - Condition: used - Scope of delivery: (see picture) (Changes and errors in technical data, specifications reserved!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Vötsch Type: VT 3050 Modules / Test Chamber Temperature Chamber Air-cooled Test chamber capacity 500 litres Temperature range -30°C / +100°C Temporal temperature fluctuation K ±0.5 Spatial temperature fluctuation K ±1.5 Temperature gradient K 3 Change rate Heating K/min 2.0 Cooling K/min 1.4 Heat compensation max. W 650 Calibration values +23°C +80°C Test chamber dimensions Width 710 mm Depth 590 mm Height 1250 mm Ibjdpfx Asw S E N Tjacec External dimensions Width 940 mm Depth 1030 mm Height 1955 mm Sound pressure level db(A)

Condition: used, Vötsch Model: VC 0018 Air-cooled climate test chamber Test chamber dimensions: Width 580 x Depth 450 x Height 750 mm Housing dimensions: Width 865 x Depth 1150 x Height 1780 mm Test chamber volume: approx. 190 liters Performance data for temperature tests: Temperature range: -10 °C to +90 °C Temperature deviation in steady-state, according to IEC 60068-3-5, dependent on test chamber temperature time-wise ±0.1 to ±0.5 K spatially ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 0.6 K/min. Cooling: 0.3 K/min. Heat compensation in the range +20 °C to +50 °C: 200 W Calibration values: +4 °C and +90 °C Performance data for climatic tests: Temperature range: +10 °C to +90 °C Temperature deviation in steady-state, according to IEC 60068-3-5, dependent on test chamber temperature time-wise ±0.1 to ±0.3 K spatially ±0.5 to ±1.0 K Humidity range: 10% to 98% r.h. Electrical connection: Rated voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 1.7 kW Rated current: 9.5 A (Neutral conductor plug: loaded) Schuko approx. connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Weight: approx. 380 kg net Refrigerant: R-134A Buyer Information for Your Safety! The following procedures are carried out on our climate chambers prior to sale: 1. Function check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) Technical specifications and information subject to change and errors! Feel free to call us with any further questions. Iedpfx Aasw Swrtecobc

Condition: excellent (used), CTS Type: TS-70/1150-10 CTS Temperature Test Chamber, Water-Cooled Control: 32-bit Controller LCD Operating Panel Digital Display of Set and Actual Values Numerical Input of Set Points Error Messages in Plain Text RS 232 Interface Ethernet Interface Free control channels for customer-side DUT (device under test) actuation Operation: capacitive touch display & PC-based control (USB/Ethernet) Test Chamber Dimensions: Height approx. 1250 mm / Width approx. 1000 mm / Depth approx. 920 mm External Dimensions: Height approx. 2000 mm / Width approx. 1800 mm / Depth approx. 1600 mm Temperature Testing: Temperature Range: -70°C to +180°C Temperature Deviation: ≤ ±0.5 K over time Temperature Change Rate according to IEC 60068-3-5 Heating: 10 K/min Cooling: 10 K/min Thermal Load: approx. 5000 W at -20°C Technical data refer to an ambient temperature of +25°C Test Volume (interior): approx. 1150 liters Operating Data: Electrical Connection Nominal Voltage: 400V 3/N 50Hz Power: 27.6 kW Nominal Current: 47.5 A Iedpfx Asw R Tunoacebc Refrigeration System: Two-stage R404A (17.8 kg) + R23 (5.4 kg) Weight: approx. 1500 kg The following steps are completed on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and error in technical data and information!) We are happy to answer any further questions you may have by phone.

Year of construction: 2020, condition: excellent (used), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: designed for a maximum load of 250 kg Specifications for temperature testing: Temperature range: -55 to +180°C Temporal temperature fluctuation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Heating compensation: max. 8000 W Specifications for climate testing: Temperature range: +10 to +95°C Humidity range: 10 to 98% RH Climate performance data (excerpt) Humidity range: 10 to 98% relative humidity (RH) Humidity deviation (temporal): At chamber center, in steady-state condition, depending on climatic setting: ±1 to ±3% RH Temperature deviation (temporal): At chamber center, in steady-state condition, depending on temperature: Ibsdpfsw R Rt Iex Aacjc ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to the setpoint (in the range > 20% RH): ±0.5 to ±1 K Operational data: LED strip: 24 V, 6.8 W / 2 x Halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10%, 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A Chamber is equipped with Greenmode Weight: approx. 2050 kg Buyer Safety Information! The following steps are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and error!) For further questions, we are happy to answer your call.

Condition: excellent (used), Heraeus Vötsch Type: VT 7021 Air-cooled temperature test chamber 1 port, nominal width 80 mm, Test chamber volume: 210 liters Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.2 to ± 0.5 K Ibodow Rz Tlopfx Aacec Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (heating): 2.5 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 800 W Test chamber dimensions: Width 560 mm, Depth 570 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Electrical connection: 1/NPE AC 230 V ± 10% 50 Hz Rated power approx. 1.8 kW, rated current 12 A Refrigerant: R404A and R23 Weight: 355 kg For your safety as a buyer, please note the following information! The following procedures are performed on the chambers we offer, in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the details!) For further questions, please feel free to contact us by phone.

Condition: good (used), Vötsch Model: VCS 7130-15 Vötsch Climate Test Chamber, Water-Cooled Temperature Test Data: Temperature range: -70°C to 180°C Temporal temperature deviation at center of workspace: ±0.3 to ±0.8 K Spatial temperature deviation: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 16 K/min Cooling: 14.5 K/min Climate Test Data: Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temporal temperature deviation at center of workspace: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation at center of workspace: ±1 to ±3% RH Maximum heat compensation: 8000 W Enclosure dimensions: External dimensions with hinges and door lock: Height: 1995 mm, Width: 1680 mm, Depth: 1855 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1300 mm, Depth: 1855 mm Internal dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm Test chamber volume: approx. 1300 liters Feedthroughs: The test chamber is equipped with feedthroughs on both the right and left sides. These allow for test leads and testing devices to be routed into the chamber. 1 x R1 NW 125 mm 1 x R1 NW 140 mm 1 x L1 NW 50 mm Test chamber illumination: Halogen bulb 24V, 50W Power supply: 3/N/PE AC 400V ±10% 50Hz Rated power: 44.0 kW Rated current: 63.0 A Customer-provided fuse: 100 A slow-blow Maximum heat output to the environment: 2.2 kW Permissible test item weight: Total load on shelf supports: 100 kg Test chamber floor: 150 kg, Removable shelf: 50 kg Refrigerants: R 404A/R 23 Weight: 1900 kg Iodpfx Aswvgwbsacebc For your security as a buyer, please note: The following steps are carried out in advance on our chambers offered for sale: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data and specifications!) We are happy to answer any further questions by phone.