Used Torque Tester for sale (2,793)

Condition: used, tester, torque wrench, torque tool, torque wrench tester, torque wrench tester -Manufacturer: Norbar, Digital torque tester with case -Type: TruCheck 2 Plus Dusdpfx Asr H Nlzjfnsn -Part No.: 43521 -Measuring range: 3 - 65 Nm -Mounting: 3/8" -Accessories: see photos -Dimensions: 205/60/H110mm -Weight: 3.8 kg

Condition: used, Chroma Type: ATE 17020 The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification. Particularly strong in: - Lifetime testing, BMS verification, and validation of complex charging cycles - High energy recovery – up to 85% efficiency - Flexible expansion through numerous channels or higher current ranges - Enterprise deployment with extensive safety features & data persistence Technical data – Chroma ATE 17020 PTS Feature Specification Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge test) Channel output: 600 W to 60 kW (modular and scalable) Total output: Up to 600 kW (depending on configuration) Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amps up to >300 A per channel Parallel operation: Yes, for higher current up to 2,600 A Current and voltage accuracy: ±(0.05% of reading + 0.05% of range) Power accuracy: ±0.1% Duedpfowwrxaox Afnen Transition time (charge/discharge): < 50 ms Sampling rate (measured data): up to 50 kHz (with BatteryPro) Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat due to energy recuperation Temperature monitoring: Optionally integrable, range 0–90°C ±2°C Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg) Mains connection: 3-phase, 400 V AC (depending on model) Applications: E-mobility, battery development, quality assurance, cell research Weight: approx. 455 kg Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), Professional ATEQ F620 leak and pressure tester, designed for quality control and production testing. The device enables precise pressure-based (air) leak testing, ideal for applications in automation, pneumatics, automotive, and serial production. Very good technical condition – the device powers up correctly and is ready for use. Current calibration/service: 16.04.2024 (ATEQ) – visible on seals and labels. Features and equipment: • clear LCD display • automatic ZERO function • test programs • communication ports (RS232 / MODBUS / PROFIBUS – depending on configuration) • analog and digital outputs Djdpfxsyc H T Io Afnsun • integrated pneumatic system with filter • robust industrial housing • 230 V power supply Laboratory and production-grade equipment – this is not workshop or amateur equipment.

Condition: used, This listing is for the Palltronic Flowstar 1V The unit is in full working condition and is ready for immediate use Palltronic Flowstar IV Filter Integrity Testing Instrument (and variants like Pall FFS04 S Palltronic Flowstar IV Filter Integrity Test Instrument / Pall Flowstar IV FFS04 Filter Integrity Tester) are precision filter integrity test instruments designed to check whether sterilising-grade membrane filters and associated assemblies have defects (like leaks or incomplete retention) before they are used in critical processes — particularly in pharmaceutical manufacturing and biotech Typical Uses These instruments are most commonly used in environments where sterility is critical: Final filtration before sterile drug product filling. Leak testing of single-use assemblies and filter housings. Quality control in vaccine production, biologics manufacturing, and related biotech workflows. Duedpfx Aeyfhdmofnjn

Condition: used, This listing is for The Palltronic Flowstar XC The unit is in full working condition and is ready for immediate use Duedpfjydqf Dsx Afnon The Palltronic Flowstar XC is a filter integrity testing instrument used mainly in biopharmaceutical, lab, and industrial filtration environments. It’s part of the Flowstar family of integrity testers designed to assess the performance and integrity of filters by directly measuring flow, which helps ensure that filtration systems are operating correctly and safely

Condition: excellent (used), Pharmatron 5Y tablet tester Dusdpfxjiy Nm Ro Afnjn The hardness tester is ideal for measuring the breaking of tablets. Cycle time 25 tablets / 3mins, up to 33mm tablet diameter, 1Ph

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Klingelnberg ZW 301 Gear Measuring Machine with Evaluation Computer Double-flank gear measuring machine with 4-position indexing table - Spur gear - Internal gear - Gear shaft - Computer (evaluation via industrial PC with fully automatic parameter calculation, quality determination, and classification) Dedpjv Ic R Ajfx Afnoun Workpiece data: Table load including fixture, max. 100 kg Load on support plate/vertical slide including fixture, max. 80 kg Workpiece knife with counterholder on measuring and feed slide, max. 300 mm Workpiece knife with counterholder on machine bed, max. 300 mm Device data: Heidenhain LIF 101 position measuring system Center distance min./max. 45/300 mm Table diameter 150 mm Table height above floor 950 mm Measuring pressure min./max. 5/30 daN Total connected load of the test device: 0.75 kVA Total space requirement: LxWxH 1900 x 1200 x 2200 mm Net weight: 750 kg PC, as well as some master wheels with common modules. Weight: 750 kg

Condition: used, Year of construction: 2007, voltage 400 V current capacity 800 VA frequency 50 Hz weight of the machine ca. ca. 355 kg In our opinion, the machine is in good used condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery Duedpfx Asxwdxcefnen if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: TGL, pressure tester -Pressure range: 0 to 25 bar -Case dimensions: 330/200/H140 mm -Weight: 3.6 kg Dusdpfxsycczuj Afnjn

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge Djdpfx Aoyccvfsfnoun -Manufacturer: Hydrotechnik Limburg, pressure tester -Pressure range: 2x 0 to 10 bar -Dimensions: 260/150/H205 mm -Weight: 3.2 kg

Condition: used, Adixen / Alcatel Alcatel ASM 122D Helium Leak Detector – mobile For sale is a professional Adixen / Alcatel ASM 122D helium leak detector from industrial use. This device is designed for highly precise leak detection and leak testing with helium and is used in industrial settings, research, and laboratories. It allows for the detection of extremely small leaks in vacuum systems, pipelines, valves, vessels, and assemblies. Duedpfoyapwkjx Afnon The leak detector features an integrated forepump and turbomolecular pump, various operating modes (vacuum / sniffer), as well as a digital display with automatic functions. Technical data (excerpt): Manufacturer: ALCATEL Model: ASM 122D Measurement principle: Helium mass spectrometer Detection limit: up to approx. 1 × 10⁻¹² mbar·l/s Power supply: 200–240 V / 50–60 Hz Power consumption: approx. 800–1200 W Made in France Weight: approx. 100 kg Condition: used Scope of delivery: (see picture) (Specifications and information subject to change and error!) If you have any further questions, please feel free to contact us by phone.

Condition: used, Adixen Adixen ASM 142 Helium Leak Detector Description: For sale is an Adixen ASM 142 helium leak detector. This device is suitable for highly precise leak detection in vacuum and pressurized systems and is used professionally in industry, laboratories, and research. Duodpeyankiofx Afnen The ASM 142 is equipped with an integrated turbomolecular pump, various measurement and test modes, as well as a clear digital display of the leak rate. Thanks to its sniffer mode and automatic test cycles, the device offers flexible application possibilities. Highlights: - Very high measurement accuracy - Vacuum and sniffer operation - Graphical & acoustic leak indication - Robust industrial design on casters Technical Data: Test gas: Helium Dimensions: approx. 110 × 60 × 70 cm Detection limit: down to approx. 5 × 10⁻¹² mbar·l/s Power supply: 230 V / 50–60 Hz Power consumption: approx. 1000 W Weight: approx. 100 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and possible errors!) For further questions, please feel free to contact us by phone.

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Duodpeu N Avxjfx Afnon Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Condition: ready for operation (used), Approximately seventy (70) combined measuring and testing devices Gossen Metrawatt for standards-compliant safety testing of electrical equipment are available. 1) Protective conductor resistance (RSL): measuring range: 0Ω-2.100Ω with resolution: 1mΩ, measuring range: 2.11Ω-31Ω with resolution: 10mΩ, test voltage range (DC): 4.5V-9V, min. test current (DC): 200mA. 2) Four-wire measurement (Kelvin measurement). 3) Insulation resistance measurement (RISO): measuring range: 0.05MΩ-1.5MΩ with resolution: 1kΩ, measuring range: 1.01MΩ-10MΩ with resolution: 10kΩ, measuring range: 10.1MΩ-310MΩ with resolution: 100kΩ, test voltages (DC): 50V/100V/250V/500V. 4) Substitute leakage current measurement (IEA/IEGA): measuring range: 0mA-21mA with resolution: 10µA, measuring range: 20mA-120mA with resolution: 100µA. 5) Patient leakage current (medical version): measuring range: 0µA-310µA with resolution: 100nA, measuring range: 0.3mA-2.1mA with resolution: 1µA, measuring range: 2mA-11mA with resolution: 10µA. Including as-new spare parts, 6x housing covers, hinge rods and SI+ modules. Documentation available. An on-site inspection is possible. Dsdeycigwspfx Afnjun

Condition: ready for operation (used), A bucket drop tester Lansmont for performing standardized drop tests to evaluate product shock resistance is available. Test load: 80kg, max. package depth: 610mm, drop height range: 305mm-1800mm, flatness accuracy: +/-2°, guide rod diameter: 76mm, plate thickness: approx. 13mm, machine dimensions X/Y/Z: approx. 920mm/1410mm/2640mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible. Duedpfxsxhnr Uo Afnon

Year of construction: 2023, condition: ready for operation (used), A fully automatic SPEA bed-of-nails in-circuit tester for SMEMA production lines is available. Type: inline ICT tester, slots: 2x768/Core, conveyor width range: 50mm-380mm, conveyor length: 450mm, resistance measurement range: 1mΩ-1GΩ, capacitance measurement range: 0.5pF-1F, inductance measurement range: 1µH-1H, dimensions X/Y/Z: approx. 900mm/1000mm/1750mm. Including various feeders (8x2-56). Documentation available. An on-site inspection is possible. Dsdexghn Hspfx Afneun

Condition: excellent (used), Impact hardness tester Type according to Professor Baumann Type: No.523 Operating instructions available Box has the dimensions : L.380 x W.220 x H. 95 mm Weight 5.5, kg Dodpfxsd R Rhwo Afnoun

Condition: excellent (used), KARG Dujdpfx Afex Trg Nsnjn KARG Industrietechnik MeltFlow on – MFI/MVR Melt Flow Index Tester For sale is a MeltFlow on melt flow index tester (MFI/MVR) from KARG Industrietechnik, Made in Germany. The unit was used in plastics quality assurance and is in very good, well-maintained condition. Ideal for laboratories, quality assurance, development, and production in plastics processing. Technical data: Manufacturer: KARG Industrietechnik Model: MeltFlow on Code: 3200.000 Rated power: 1.6 kW Rated current: 7 A Voltage: 230 V / 50 Hz CE marking: yes Features & scope of delivery: - MeltFlow on tester - Set of weights: - 5.000 kg - 2.160 kg - 1.200 g - 5.000 g - Piston / plunger - Cleaning tool - Software CD: K-BASE software program V4.1 SP0 Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications and details are subject to changes and errors!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), functionality: fully functional, A Bareiss digital hardness tester in good, used condition is for sale, as shown in the pictures. Technical data: • Manufacturer: Bareiss Prüfgerätebau GmbH • Model: Digi-Test II • Hardness testing method: Shore A - D - IRHD M • The modular digi test II offers you maximum flexibility in hardness testing of elastomers, polymers, soft elastic materials, composite materials, and foams. In just a few simple steps and without tools, the numerous measuring devices can be exchanged according to Shore, VLRH, or IRHD, allowing you to quickly switch between different measuring methods. The hardness measurements are fully automatic, reducing user influence to a minimum. A connected electronic unit recognizes the selected measuring device, automatically switches to the appropriate measuring method, and guides you through the test sequence via the user-friendly menu. • With many accessories, operating instructions, drivers • Condition: Used, functional Insured shipping costs: €30 You will receive an invoice with VAT shown separately. Dusdpfx Afoyfmm Tonjn Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale. Storage location: Shelf 1

Condition: used, This listing is for a Sartorius Sartocheck 3 Plus Filter Integrity Tester. The unit is in full working condition and is ready for immediate release. The Sartorius Sartocheck 3 Plus Filter Integrity Tester is an advanced instrument designed for the precise testing of membrane filter systems, making it essential for biochemistry and pharmaceutical applications. Here’s a detailed breakdown of its features and specifications: Key Features: Microprocessor Control: Offers programmable protocols for testing filter systems, allowing users to store up to 60 programs directly and expand to 240 with a memory card. Integrity Testing: Designed to ensure the integrity of membrane filters, minimizing the risk of using defective cartridges. Comprehensive Testing Protocols: Includes a variety of tests such as: - Diffusion Test Dujdpfx Afsxxyaronsn - Bubble Point Test - Combined Diffusion and Bubble Point Test - Water Intrusion Test - Water Flow Test - Pressure Drop Test - Multipoint Diffusion Test - Data Reporting: Generates complete paper reports to meet cGMP requirements, detailing: - Test parameters (pressure, time) - Results (net volume, pressure drop, evaluations) - Filter cartridges used and products tested - User-Friendly Cleaning Protocol: Provides on-screen instructions for cleaning, compatible with any cleaning reagent due to its stainless steel construction. Manufacturer Specifications: Power Requirements:Operating Voltage: 100-240 V ±10% Phases: 1 Ph/N Grounding Conductor: Separate SL (yellow-green) Frequency: 47-63 Hz Protection Rating: IP 44, indicating resistance to dust and splashing water. Pressure Specifications: Maximum Operating Pressure: 10 bar g Operating Pressure: Minimum 4 bar g Internal Limit Pressure: 10 bar g Maximum Power Input: 74 Watts Installation: Must adhere to VDE regulations.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 51720166-1, overall weight: 400 kg, Zeltwanger Leak Testing System F56BEV – Year of Manufacture 2018 For sale is an automated leak testing system from the renowned manufacturer Zeltwanger. The F56BEV system is designed for precise and reproducible leak and tightness testing in industrial production environments, making it ideal for both serial and random-sample inspections. Technical Data: Manufacturer: Zeltwanger Type / Model: Leak Testing System F56BEV Project No.: 51720166 Machine Number: 51720166-1 Year of Manufacture: 2018 CE Marking: Present Electrical Data: Connection: 230 V / 1~ / 50 Hz Dujdpjydl Dnefx Afnen Max. Fuse Protection: 16 A Max. Power Consumption: 10 A Power Input: 0.5 kW Supply Line: 3 × 1.5 mm² Control Voltage: 24 V DC Mechanical / Pneumatic Data: Machine Weight: approx. 400 kg Pneumatic Supply: min. 5 bar (oil-free compressed air) Advantages & Features: High-precision leak and tightness testing Robust industrial-grade design Low energy consumption Compact construction Easy integration into existing production lines Proven Zeltwanger quality Typical Applications: Automotive industry & suppliers Plastics and metal processing Medical technology Industrial and special machinery construction Quality assurance / end-of-line testing

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 51720166-2, Zeltwanger Leak Testing System F56BEV – Year of Manufacture 2018 For sale is a high-quality leak testing machine from the renowned manufacturer Zeltwanger, known for precise and reliable testing and automation solutions in industrial applications. The F56BEV system is ideally suited for automated leak testing of components and assemblies, impressing with its compact design, easy integration, and robust industrial construction. Technical data: System designation: Leak testing F56BEV Project No.: 51720166 Machine No.: 51720166-2 Year of manufacture: 2018 CE marking: available Electrical data: Supply voltage: 230 V / 1~ / 50 Hz Max. fuse rating: 16 A I-Max: 10 A Power consumption: 0.5 kW Supply cable: 3 × 1.5 mm² Control voltage: 24 VDC Duodpfxoydd Uxe Afnjn Mechanical / Pneumatic data: Machine weight: approx. 400 kg Pneumatic supply: min. 5 bar (oil-free compressed air) Highlights: - Proven Zeltwanger quality - Ideal for series and single-part testing - Robust industrial construction - Low power consumption - Compact design - CE compliant Fields of application: - Automotive industry - Supplier industry - Medical technology - Plastics and metal processing - General custom machine engineering

Condition: used, Technical details: Dsdpfxoyhwnco Afnoun Surftest SJ-210 Year of manufacture (purchased): 2017 Price: EUR 1,500 Granite surface plate 400 x 250 x 70 Price: EUR 850

Year of construction: 1997, condition: ready for operation (used), Suitable for testing steel drums for tightness, drum diameter: 574-598mm, max. drum weight: 30kg, drum temperature: 10-50°C, with documentation. Dedom H Uqkepfx Afnjun

Condition: used, Torque wrench, torque tool -Manufacturer: GEDORE, torque wrench type TORCOFIX -Z 80-400 Nm .: 4440-01 Dedoqw D D Topfx Afnoun -Torque: 80 - 400 Nm / 60 - 300 lbf-ft -Holder: pin holder Ø 16 mm -Transport dimensions: 755/70/H65 mm -Weight: 2.1 kg