Used Test Press Heat for sale (32,906)

Condition: used, With this offer, you are purchasing a used manual transfer press ‘Lotus LTS 150 B from 2023’. Item for sale: Csdpfx Agex Eg Upozjpw 1 x Lotus LTS 150 B with the following equipment: Includes DTF gel oven Year of manufacture: 2023 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 052302303, Bobst Easypress 142, for the format 102x142cm to carry out models, test punching, preparation work for the production machine. excellent condition, year of construction 1997 Codpfx Agjuk I Nxozspw

Condition: excellent (used), functionality: fully functional, total height: 8,000 mm, installation height: 5,970 mm, total width: 6,000 mm, total length: 7,700 mm, table width: 3,500 mm, table length: 2,500 mm, table load: 59,000 kg, stroke length: 2,500 mm, pressing force: 300 t, Clamping force: 300 Ton Opening force of movable platen: 100 Ton Operating pressure: 250 bar Platen dimensions: 3,500 x 2,500 mm Minimum mold dimensions (at max clamping force): 2,800 x 2,000 mm Minimum daylight between platens: 1,400 mm Height of clamping platen from foundation: 930 mm Movable platen stroke: 2,000 mm Sliding table stroke: 2,500 mm Tilting angle of oscillating table: 110° Max. upper mold weight: 24 ton Max. lower mold (sliding table) weight: 59 ton Ground clearance: 5,970 mm Overall height: approx. 8,000 mm Machine width: approx. 6,000 mm Cedpfeymltuex Agzepw Machine depth: approx. 7,700 mm

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 24 kg, total height: 1,000 mm, total width: 330 mm, total length: 530 mm, The MultiTest 2.5dV is one of the most widely supplied tensile and compression test stands. The tester is robust, precise, and fully customizable with load cells, grips, and software. The MultiTest 2.5dV can be fitted with load cells ranging from 2 N to 2.5 kN, depending on your requirements. The VectorPro Lite software is highly intuitive and features a clear interface. This makes the tester suitable not only for laboratories and inspection rooms, but also for use directly in production environments. When using the software, all data is automatically stored and can be retrieved at any time. Without the software, the tester operates as a stand-alone device and can transmit measurement values to a computer in multiple ways. Cpjdpfxsx Apnts Agzsw The price includes a load cell of your choice, cables, delivery in the Netherlands and Belgium, commissioning, and training. We offer a 2-year warranty. The VectorPro Lite software is available for an additional €1,000, and grips are not included in the price.

Condition: good (used), functionality: fully functional, total height: 3,300 mm, table height: 850 mm, installation height: 1,000 mm, total width: 850 mm, total length: 950 mm, pressing force: 50 t, overall weight: 4,500 kg, The cylinder has been completely overhauled. Cpjdpeyh Rfpofx Agzew

Year of construction: 2026, condition: as good as new (ex-display), Vacuum - membrane press VP - series are the ideal solution for the wood processing industry. VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive so that the performance is higher. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components The heating system is equipped with temperature control Rubber membrane 2.5 mm Table top is made of plastic 12 mm Cedpsdvltyefx Agzjpw Oil-free Becker vacuum pump 25 m3/h The control system of vacuum / Tankinhalr 15 l Work surface: 3000x1500mm Heating system temperature: Max 60 degrees C Heating system: KW 4,5 Pump output: KW 0.75 Vacuum pump capacity: 25 m3/h Rubber membrane Dimensions exterior: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Off the shelf 54634 Bitburg -free load-

Year of construction: 2026, condition: as good as new (ex-display), Vacuum - membrane press VP - Series are the optimal solution for woodworking. VP 3000 is equipped with the heating technology, which shortens the drying time of the glue, so that the efficiency is higher. Possible applications: Veneer / form gluing / wrapping... Coating of different profiles (veneer,paper, plastic...) Wood bending: production of bent and layer-glued components The heating system is equipped with temperature control Rubber membrane 2,5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l working area: 3000x1500mm Heating system temperature: Max. 60 degrees C heating system: KW 4,5 Pump capacity: KW 0,75 Vacuum pump flow rate: 25 m3/h Rubber membrane Dimensions outside: 3100 x 1650 x 1600 mm Weight: 450 kg Machine is equipped with a chassis. Location: From warehouse 54634 Bitburg - free on truck - Cpodpedwh E Ajfx Agzow

Condition: used, Thermopatch Type: NL-15-SQR/R The NL-15-SQR/R is a sophisticated combination of advanced technology and a modern, ergonomic design. The device heats up quickly and automatically switches to energy-saving mode when needed. The NL-15-SQR/R operates exclusively with compressed air and is the one-size-fits-all solution for every application. The display is user-friendly. Intended Use: This heat seal press is particularly suitable for industrial applications that require precise temperature control and the ability to use smaller sealing plates (140 x 140 mm). Common applications include applying patches, transfers, or embroidery to textiles. Special Features: Robust and durable: The machine is designed for intensive use and is popular in the textile industry as well as other industries that require high-volume, medium- to high-temperature processing. High flexibility: The temperature range of 25 to 210°C and the adjustable timer from 1 to 240 seconds offer flexibility for a wide variety of materials and applications. Efficient: The air pressure range of 3 to 6 bar and the air consumption of 3.01 liters per cycle make the machine efficient in operation. The Thermopatch NL-15-SQR/R is an industrial heat seal press with the following technical specifications: Technical Data: Power supply: 240 V Maximum power: 800 W Temperature range: 25 – 210 °C Timer: 1 – 240 seconds Dimensions (H x W x D): 470 x 540 x 470 mm Sealing plate (mm): 140 x 140 mm Noise level: < 70 dB Air pressure range: 3 – 6 bar Air consumption per cycle at 5 bar: 3.01 l Weight: 59 kg Codpjwif Rgofx Agzepw Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Concrete sample press for concrete and material testing Flexural strength test Determination of compressive strength Cpedoxb Nv Uopfx Agzow

Year of construction: 2021, condition: new, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber Codpsgrkigsfx Agzspw pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total width: 2,350 mm, total length: 6,000 mm, inner dimension length: 3,000 mm, inner dimension width: 1,600 mm, TECHNICAL DETAILS Oven dimensions: 3,000 x 1,600 mm MACHINE DETAILS External dimensions (L x W): 6,000 x 2,350 mm Firing: Gas Orientation: Vertical, for use with vacuum bags; connection to vacuum port inside oven EQUIPMENT 2 x trolleys included The following data is from a general offer; the seller accepts no liability for its accuracy. This also applies to the data sheet in the appendix. Electrical Voltage: 400 V Current: 16 A Frequency: 50 Hz Gas Type: Natural gas / Propane / LPG Connection: 1"1/4 Gas pressure: 20–60 mbar Propane/LPG consumption (4 burners): 8 kg Propane/LPG consumption (8 burners): 16 kg Natural gas consumption (4 burners): 9.6 m³ Natural gas consumption (8 burners): 19.2 m³ Cpjdpfxoxur Nde Agzew Temperature range (4 burners): 40–150 °C Temperature range (8 burners): 40–320 °C Power output (4 burners): 96 kW Power output (8 burners): 192 kW

Condition: ready for operation (used), Year of construction: 1990, Miller-Johannisberg 660 Specification Detail Process Heatset web offset printing Web Width 660 mm Cut-off 452 mm Colors/Units Typically configured with 5 printing units (works 4+4) Dryer VITS gas dryer Folder Capable of folding up to A5 size Controls Includes a control panel with register control Codpfsyk Eg Njx Agzjpw Tension control system Baldwin dampening Chiller unit, plus chilling system before folder

Year of construction: 1998, condition: excellent (used), table height: 2,250 mm, table width: 4,000 mm, Extra large heat press! Cjdpfxowfp R As Agzopw For sale in excellent technical condition.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SINAC 25/40 SM Exp, total height: 1,500 mm, total width: 1,000 mm, total length: 2,500 mm, type of input current: three-phase, input voltage: 400 V, pressure: 6 bar, input current: 45 A, Induction heating station with 25 kW power for transporting and pressing bearings. Csdpfow Hwp Nsx Agzepw

Condition: used, Year of construction: 2013, operating hours: 1,500 h, functionality: fully functional, Water heated hyrayulic Press 9 storey (cutom made) Stainless Steel Plates 3,50m x 2,30m/each Cpedswiuxmopfx Agzew

Condition: like new (used), functionality: fully functional, machine/vehicle number: Geo Knight Maxi - Press, Year of construction: 2017, Please see PDF for detailed secifications: The Maxi Press AIR is an Automatic large format heat transfer press intended for more automated and higher pressure needs than the Manual version. The Maxi- AIR provides an oversized platen & a better Cjdpfxsv Dm Udj Agzspw production-oriented press with a single front loading table and high pressure pneumatic lifting system. This pressure system is powered by a dual air-bag, 10-ton, 20,000 lbs max force self leveling mechanism. The press is activated with a push of a button, and automatically releases at the end of the timing cycle. The front console features the Digital Knight control, regulating digital temperature and digital automatic timing control, as well as full air pressure regulation. Ideal applications that the Maxi- AIR has performed flawlessly include: large fabrics & piece goods, full-bleed printed sportswear, banners, fl oor mats, carpets, mouse pads, plastics, sheet metal and much more. Most importantly, the 20,000 lbs of regulated applied force allow for deep embedding of materials such as TILES into nomex padding for full bleed wrap-around printing, as well as larger embossing applications. The Maxi- AIR strongly supports the sublimation transfer process, as well as digitally produced transfers, hot and cold peel plastisol transfers and large format laminating processes.

Condition: new, Infrared Heated Press – LT Machines Infra Red Heated Press Brand new, unused!!! Manufacturer: LT Machines Device type: Infrared heated press Model: Infra Red Heated Press Control: Control panel with 12 independent heating zones Cpedpew A Rdrefx Agzew Heating system: Infrared Overall dimensions: Width: 4000 mm Depth: 2600 mm Height: 2000 mm

Condition: good (used), Resato HBU-B160 Gas High-Pressure Workshop Test System The oil and gas industry revolves around the production of crude oil and natural gas. One of the challenges is to optimally utilize the equipment to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure testing guarantees the quality and safety of oil and gas production components. The well is stimulated by injecting a chemical fluid. High-pressure systems control and regulate back pressure and fluids with the control system. This allows oil and gas to be produced more safely. Manufacturer: Resato HBU Test System Type: HBU-B160 Max. pressure: 200 bar Max. capacity: 1570 cc / Max. pressure: 7 bar 2 x Gas cylinder holders 3 x Gas cylinder trolleys Digital control panel missing Cjdor Hmihepfx Agzspw Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Used electrically heated pressure vessel with agitator Cedpfx Aged Dwi Hszepw Item number: 10256 Last use: Chemistry Volume: 280L Type: Upright on feet Material (wetted parts): 1.4301 stainless steel Bottom: dished bottom Top: dished bottom with flange ring Operating pressure according to type plate: +3Bar Operating temperature: Max. 90°C Tank dimensions: Inner diameter: 560mm Outer diameter: 580mm Height of the feet: 260mm Distance from drain to floor: 365mm Total height: 1540mm Materials: Interior: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Equipment: Double jacket around cylinder and bottom electrically heated Agitator in upper base, speed adjustable Top floor completely removable Various connections Sight glass in cylinder

Condition: good (used), Used pressure vessel / Electrically heated SKU: 10407 Last use: Cosmetics Volume: 695 litres Type: Standing on 3 feet Material (media contact): 1.4404 stainless steel Design: Single-walled / Insulated / Electric Heating Manhole: 345mm Bottom: Curved Upper floor: Curved Operating pressure according to type plate: - 1 / +3 bar Test pressure according to type plate: 8 bar Maximum operating temperature: +152°C Dimensions of containers: Outer diameter: 820mm Cpodjd R Hgkepfx Agzow Cylindrical height: 1220mm Height of feet: 750mm Distance outflow to ground: 800mm Total height: 2040mm Total width: 1000mm Materials: Inside: 1.4404 / AISI316L Exterior parts: 1.4301 / AISI304 Facilities: Nameplate: yes Outlet: DN 65 Various connections Isolated Electrically heated Actuator

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, total width: 330 mm, total length: 570 mm, total height: 1,090 mm, overall weight: 70 kg, Equipment: documentation/manual, The Mecmesin OmniTest tensile/compression testing machine is a robust and precise single-column universal testing machine. Together with the VectorPro MT software, the OmniTest is an excellent choice for product research and materials testing. The sturdy and durable frame accommodates load cells ranging from 5 N up to 5 kN or 7.5 kN. Multiple load cells are available and can be quickly exchanged, allowing for tests to be performed across virtually any required range. Naturally, a wide range of testing setups is available. The tester is designed to deliver outstanding performance and ease of operation at an attractive price. Existing Mecmesin customers are already familiar with the reliable hardware, which is always robust and built for intensive use. VectorPro MT software is user-friendly and available in multiple languages, including Dutch. The intuitive graphical user interface enables any operator to quickly configure and perform tests. Delivery is limited to the Netherlands and Belgium. Key features include: – Simple operation – Load cells from 5 N to 7.5 kN – Software highly suitable for use with touchscreens – Multilingual software, including Dutch – Reporting to Excel, PDF, email, etc. – Various options such as extensometers available – 30 years of experience and satisfied customers Cedpjx Apg Ajfx Agzopw – Includes 1-year warranty, commissioning, and training – We select the grippers together with you (not included) A PC (touchscreen) shown in the picture is optional.

Condition: used, Used agitated tank with insulation Previous application: Pharmaceuticals Item number: 10785 Volume: 300 liters Type: Standing on 4 castors Product-contact material: 1.4571 / AISI316 Design: with insulation Operating pressure (as per nameplate): +0.5 bar Max. operating temperature: +95°C Tank dimensions: Manway: 410 mm Internal diameter: 700 mm External diameter: 800 mm Foot height: 870 mm Total height: 1700 mm Total width: 870 mm Total length: 950 mm Cylindrical height: 650 mm Materials: Internal: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Nameplate: Yes Outlet diameter: DN25 Distance from outlet to floor: 365 mm Cpsdpfxox Ewqde Agzew Propeller agitator Empty weight: 184 kg

Year of construction: 2020, operating hours: 14,099 h, condition: excellent (used), machine/vehicle number: S0055742, used ALMIG Belt XP 22 - (8 bar) oil-injected screw compressor with integrated heat recovery with Aircontrol Premium controller Cpedpfxoix Aiyj Agzjw Operating hours: 14099 Bh Pressure: 8 bar Rated power: 22 kW Delivery quantity: 3.70 m³ / min Sound level: 74 dB (A) Compressed air outlet: G 1 " Dimensions length x width x height: 1250 x 880 x 1515 mm Weight: 681 kg Visit our store we have a lot of used and new compressors on stock.

Condition: ready for operation (used), Compressor DWM DLJP-20x-EWL, Compressor DWM DLJP-20x-EWL, Piston Compressor, Cooling Compressor, Heating Compressor, Used machine Technical Specifications Brand: DWM COPELAND Model: DLJP-20X-EWL Refrigerant: Freon Weight: 82 kg Year of manufacture: 1999 Performance at different temperatures: -20ºC/+40ºC: 4.98 kW Cpjdeu T H Rlepfx Agzsw -30ºC/+40ºC: 2.75 kW Maximum pressure values: 28/22.5 bar Delivery capacity: 14.50 m³/h Dimensions: Length: 460 mm Width: 330 mm Height: 550 mm Electrical Data: 400V; 5.6A; 1450 RPM

Condition: new, Year of construction: 2025, functionality: fully functional, CCT1600L A-M Pressure tester for cylinder head and block – new machine. Hydraulic tray lifting, motorized tray rotation. Technical details: Max. cylinder head capacities: Lenght x Width x Height: 1350 x 425 x 300 mm Capacity of stainless steel tank: 500 liter Heating elements: 2 x 4,5 kw Hydraulic tray lifting Motorized tray rotation Hydraulic hoist: 0,75 kw Cedpfxjncd Ecs Agzepw Gear-motor: 0,25 kw Up and down travel time: 600 mm in 10 sec Thermostat: 0-90°C Power supply: 16kva-3x230v-ac-50/60hz Net weight approx: 600 kg Space requirements: Lenght x Width x Height: 2100 x 1050 x 1700 mm If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines