Used Engine Test Bench for sale (28,206)

Condition: used, Shaker Fixture Cube / Clamping Cube made of Aluminum Manufacturer: Unknown Type: Shaker Fixture Cube / Fixture Block / Clamping Cube Material: Aluminum Machine Type: Clamping cube for vibration test benches / vibration testing External dimensions: approx. 240 × 240 × 240 mm For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube was developed for use on electrodynamic vibration test benches and serves for the secure fastening of test specimens, measuring setups, and special devices. Due to the precision-machined clamping surfaces and the numerous threaded holes on all sides, the fixture cube is ideally suited for testing laboratories, research institutions, mechanical engineering, the automotive industry, and aerospace technology. Technical data: Manufacturer: Unknown Material: Aluminum Design: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 mounting holes: Ø approx. 80 mm Central through hole Precision-machined clamping surfaces Ibelhcjzp E Dkodw Hea Threaded holes on all side surfaces Heavy-duty industrial design Dimensions: External dimensions (W × D × H): approx. 240 × 240 × 240 mm Material: Aluminum Features: Precision-machined clamping surfaces Threaded holes on all side surfaces Four large mounting holes Central through hole Heavy-duty aluminum construction High stiffness for dynamic loads Suitable for individual test setups Application areas: Vibration test benches Vibration testing Environmental testing Testing laboratories Research and development Mechanical engineering Automotive industry Aerospace technology Shipping data: Dimensions (W × D × H): approx. 240 × 240 × 240 mm Shipping via parcel service possible by arrangement. Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Scope of delivery: Shaker Fixture Cube made of aluminum Scope of delivery as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2018, Nominal power in kilowatts 7,7 MW Maximum power 8,47 MW Nominal turning speed 1150 1/min Maximum turning speed 2200 1/min Nominal torque 63940 Nm Maximum torque 70330 Nm Islhcdwsrr Amms Heba 8 MW test bench for gears, closed loop

Condition: used, LDS V790-335T Vibration Test System with HPA-K CE Amplifier Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V790-335T with HPA-K CE Amplifier Machine Type: Electro-dynamic Vibration Test System / Shaker System Cooling: Air-cooled Vibrator For sale is an industrial vibration test system from the manufacturer LDS (Ling Dynamic Systems). The system was designed for professional vibration and shock testing and is suitable for research and development, quality assurance, environmental simulation, electronics testing, as well as industrial stress and endurance tests. Technical Data Shaker Manufacturer: Ling Dynamic Systems Ltd. (LDS) Product: Air-Cooled Vibrator Model: V790-335T Armature diameter: 335 mm Frequency range: DC to 3,000 Hz Resonant frequency: approx. 2,250 Hz Max. continuous displacement: 50.8 mm pk-pk Max. velocity: 1.5 m/s Sine force peak: approx. 6.67 kN / 1,500 lbf Random force RMS: approx. 6.67 kN / 1,500 lbf Half-sine shock force peak: approx. 26.69 kN / 6,000 lbf Effective moving mass: approx. 13.08 kg Internal load capacity: approx. 160 kg Compressed air supply required: Load support: approx. 5.52 bar / 80 psi Optional air isolation: approx. 5.52 bar / 80 psi Power Amplifier Manufacturer: Ling Dynamic Systems Ltd. (LDS) Product: HPA-K Amplifier Model: HPA-K CE Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 V Current setting according to nameplate: 400 V Maximum connection power: 9.3 kVA Weight of amplifier: approx. 750 kg Equipment LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control and rack units PC workstation with monitor, keyboard, and mouse Ijloy Uigcjhcdw Hjba Cables and connection accessories as shown in the pictures Emergency stop units and safety accessories Existing documents and documentation Areas of Application Vibration testing Shock testing Environmental simulation Electronics testing Automotive industry Aerospace Research and development Quality assurance Industrial stress tests Scope of Delivery LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control and rack units as shown in the pictures PC workstation as shown in the pictures Cables and accessories as shown in the pictures Existing documents / manual Condition Used System from industrial use Optical condition as shown in the pictures Normal signs of wear and tear and storage Inspection and testing on site are possible and expressly desired after prior arrangement. Due to the size and weight, professional dismantling, loading, and transport organization are recommended. Availability: by arrangement. Scope of delivery as shown in the pictures. Changes and errors in the technical data as well as prior sale are reserved.

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min Ijlhcdozimcbew Hsba - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Stand – Fully Functional Description: For sale is a Sincotec Power Flow servo-hydraulic test stand from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g., in the automotive, mechanical engineering, or research sectors. Technical Highlights: - Max. test force: 100 kN (up to ±150 kN) - Max. torque: ±2000 Nm (up to ±4000 Nm) - Linear stroke: ±50 mm (max. ±75 mm) - Max. rotation angle: ±50° - Servo-hydraulic control Iboljzimb Dshcdw Hoa - Control via Sincotec TestPilot / CoPilot software - Includes large hydraulic power unit Dimensions & Test Stand: - Test table: approx. 1.20 × 1.00 × 1.20 m (H) - Total stand height: approx. 3.30 m Hydraulic Power Unit (separate): - Height: 2085 mm - Length: 2714 mm - Width: 1820 mm Fully functional before dismantling Power Supply / Electrical (from nameplates): - Single units / Motors - 230 V / 50 Hz - Drain oil pump: 0.18 kW / 1.5 A - 400 V / 50 Hz (three-phase current) - Traverse: 0.25 kW / 0.79 A - Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Delivery includes: (see photos) (Specifications and details subject to change or error!) For further questions, feel free to contact us by phone.

Condition: excellent (used), EDAG EDAG Huf Endurance Test Stand Intended use: This test stand is intended exclusively for testing components that are capable of rotational and/or translational movement within the scope of an endurance test and within the limits of the following technical specifications. Technical data: Dimensions: Width 1565 mm x Depth 615 mm x Height 1655 mm Weight approx. 450 kg Operating voltage 400V / 50Hz Iolhcozh U Rdjdw Hoba Control voltage 5, 24 Preliminary fuse 16 A Testing device: Maximum stroke 194 mm Maximum axial force 500 N Maximum torque 5 Nm Breakaway force (manually operated slider) 15 N Displacement force (manually operated slider) 10 N Other equipment: P4, 24" TFT monitor (1900 x 1080) Operating system: Windows XP Measurement and control software: LabVIEW 2011 PC plug-in cards: 1 card, NI PCI-6251, 1 card, N1 PCI-7044 Drawer: 500 mm (full extension with automatic closing) Additional load: 500 N Drawer cabinet, lockable: 3 drawers The teach-in endurance test stand is a device for carrying out endurance tests on test objects that can rotate and/or move translationally, e.g., cylinder locks, door handles, key functions. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Kübrich Kübrich Test Systems 48V Belt Starter Generator - Component Test Bench Details of the test bench: (See Figure 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for control, interface panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measuring technology box (9) H4: Interface box Intended use: The test bench is used for conducting tests on belt starter generators during development. Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (briefly, less than 1 s) Ioljzhkb Sohcdw Hjba Control voltage: 24 V Mechanical performance data according to the data sheet of the load machine Note that a gear ratio of 1:2 to the test specimen shaft must be observed. Rotational speeds: Load machine: Manual operation: 0 - 50 1/min Automatic operation: 0 - 10,000 1/min Test specimen motor: Manual operation: 0 - 100 1/min Automatic operation: 0 - 20,000 1/min Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Condition: used Scope of supply: (See Figure) (Changes and errors in the technical data and details are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Siga Type: GS-517-400 External dimensions L x W x H: 4960 x 2500 x 2400 mm. The complete system is calibrated according to DAKKS standards and is therefore approved for tests relevant to type approval. Butane loading rate - Continuously adjustable from 5 g/h to 77 g/h Fuel loading rate - Continuously adjustable from 5 g/h to 100 g/h Fuel temperature control Ibjljzg Ex Nehcdw Hsa - Continuously adjustable from 20°C to 50°C Gasoline quantity selectable - From 0 l to 8 l Selectable breakthrough criterion - From 1 g to 10 g Temperature of purge air flow - Continuously adjustable from 25°C to 30°C Precision scales for test specimen and reference AKF - Measuring range up to 6 kg, 0.1 g resolution Purge underpressure - Continuously adjustable from 0 hPa to 30 hPa Purge air flow - Continuously adjustable from 1 l/min to 60 l/min Humid purge air flow - Continuously adjustable from 10% RH to 85% RH Number of cycles from 1 to 999 (loading/purging) Condition: used Sale from our location! Scope of supply: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2013, functionality: fully functional, total width: 1,000 mm, total length: 2,500 mm, total height: 1,020 mm, Optical table Iolhcezrfl Hodw Hoba Perforated plate made of stainless steel (11 cm) Frame: 80x82x155 cm (H x W x L)

Condition: excellent (used), Lindner Burst Test Stand Iboljzd Sivehcdw Hoa We offer a Lindner burst test stand here. AGB Burst Test Stand TMM4 Technical Data: AGB Burst Test Stand TMM4 Year of manufacture: 2015 Rated voltage: 3/N/PE AC 400V Rated power: 5.5 kW Chamber temperature range: RT ... 180°C Medium temperature range: RT ... 135°C Pressure range: 0 ... 5 bar Compressed air supply: 6-8 bar Test medium: Glycol / Water Heat transfer fluid: Fragoltherm Q-HTF Dimensions: Length 2150 mm x Width 1050 mm x 2160 mm Operating voltage: 3/N/PE AC 400V +/-10% 50Hz Power: 5.5kW Rated current: 8A Fuses: 16A Control voltage: 24VDC PLC system: S7-1215 DC/DC/RLY The following items are required for commissioning the burst test stand: Pump, cooling tower & fire alarm control panel – these are not included. Type: AGB Burst Test Stand TMM4 Weight approx. 705 kg Condition: used Scope of supply: (See image) (Subject to changes and errors in technical data and specifications!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), KSE Leakage Testing System Here we offer a KSE leakage testing system. Ielhcdszdzilow Hsba Testing system for automotive applications Testing of electric drives Insulation/leakage testing of electric motors Supply voltage: 400 VAC Control voltage: 24 VDC Connected load: 0.75 kW Type: KSE I/SB-3 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, 10 containers dedicated to hydrogen testing L 6058 x W 2438 x H 2896 mm Ready to be connected to cooling/electrical/H2-N2 systems Cooling capacity: 100 kW Electrical capacity: 40 kW (can be increased to 100 kW) Bench automation software provided (Horiba STARS) Durability testing Characterization testing Islhcdjzgv Rvew Hjba EU declaration of conformity available

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: 7001922, input voltage: 400 V, Equipped with 4 M-20iD/12L Fanuc robots. Ibolhcdwjy T Ulzs Hsa Installation dimensions: 16,000 x 4,000 x 3,400 mm.

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: CRi PC singelline, Well-functioning Common Rail diesel injector test bench. The machine is equipped with a new PC and recent software. It is supplied with a large selection of clamping blocks, test cables, return connections, and high-pressure pipes. Ibolhcjxiyxvjdw Hoa

Condition: good (used), Material test stand / final inspection  consisting of the following main components   Keyence XG-H500M Digital 5 million pixel B/W camera  Keyence XG-7701P Multi-camera image processing system/controller Keyence CA-DC21E Illumination Controller   Opto Engineering TC23096 Bi-telecentric lens  Keyence XG-H500M Digital 5 million pixel B/W camera  CCD: 2/3-inch monochrome CCD, squareElement all pixels 11x reading speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), interlace (40.3 ms)Interlace is a binning process that sums the odd lines and even lines. Model CA-DC21E Illumination Controller   Type Illumination Controller For XG/CV-5000/CV-X200/CV-X100 Series only Input: Forced lighting cut-off: Input voltage max. 26.4 V, min. 2 mA Output Light control method (1) Constant voltage control method (DC lighting) (2) Pulse-width modulation method (emission frequency: 100 kHz) [Change of control unit setting]. Brightness levels 255 levels digital [change of control unit setting] Number of connections Isleg Sxmfohcdw Hoba Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC/24 VDC [setting via DIP switches] Power Max. 40 W (30 W per channel) Synchronisation Synchronisation via FLASH output/continuous illumination [change of control unit setting] Response time (1) Constant voltage regulation: Max. 10 ms for 12 V output, Max. 20 ms for 24 V output (2) Pulse width modulation method: Max. 1 ms with 12-/24-V output. Display LED display Supply voltage 24 VDC ±10 % Current consumption 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence xg-7701p Multi-Camera Image Processing System/Controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093 x, C-mount Magnification (×) 0.093 Image circle Ø (mm) 11.0 Max detector size 2/3" Working distance (1) (mm) 278.6 wF/# (2) 8 Typical telecentricity (max) (3) (deg) < 0.06 (0.08) Typical distortion (max) (4) (%) < 0.04 (0.08) Depth of field (5) (mm) 77 CTF 70 lp/mm (%) > 40 Image area of the object (6)     with 1/3″ detector (4.8 x 3.6 mm) (mm × mm) 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm) 61.29 x 46.02 with 1/2″ detector (6.4 x 4.8 mm) (mm × mm) 68.82 x 51.61 with 1/1.8″ detector (7.13 x 5.33 mm) (mm × mm) 76.67 x 57.31 with 2/3″ - 5 MP detector (8.50 x 7.09 mm) (mm × mm) 91.40 x 76.24 Dimensions Mount C Phase adjustment (7)         Length (8) (mm) 336.6 Diameter (mm) 143 Weight (g) 2500 Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Testing console, testing station, measuring station, testing device, measuring device, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage testing device PE/IS/HV SCT 42 / 91-3J.3 is used for measuring voltage resistance, insulation resistance, and the voltage drop of the protective conductor, in accordance with VDE0113 or IEC standards, as per EN60204, Part 1. Serial No.: 0064016 Year of manufacture: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device 90-1V provides a highly stable direct voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground and can be set to a potential of up to 300 V. Ibelhcdjf Axn Asw Hea Device No.: 90-7WZ006 Year of manufacture: 2000 Supply voltage: 230 VAC Supply frequency: 50 Hz Rated current: 1 A Interference suppression according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year of manufacture: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Device unit, compact on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices are available under storage numbers 57819, 57820 and 57821.

Year of construction: 2023, condition: excellent (used), machine/vehicle number: 0293, We are selling the test bench from the aircraft manufacturing sector. Islhcdoyl S Euow Heba

Year of construction: 2017, condition: good (used), evopro test bench for printed AmbientLight modules P585 Manufacturer: evopro systems engineering AG Description: Test bench for printed AmbientLight modules Project no.: P585 Serial number: 0001 Year of manufacture: 2017 Power supply: 230 V / 50 Hz / 13 A (L+N+PE) Design: Enclosed test bench for printed AmbientLight modules Structure: Aluminium profile frame with complete test cabin Application: Optical and functional testing of lighting and AmbientLight components Location: Schierling Ibjloyrnazohcdw Hoa Inspection possible by appointment.

Condition: not inspected (used), functionality: unexamined, NC-125 diesel injection pump test bench in used condition. This is a classic mechanical test stand designed for testing and calibrating diesel fuel injection pumps and injectors. Unit features a rotating pump mount, multiple high-pressure test lines, analog gauges, and manual control panel. Ideal for diesel repair shops, agricultural equipment service, or restoration projects. Machine shows signs of normal use (oil, wear, aging components) but appears complete. _____ Specifications (typical for this type) • Model: NC-125 • Type: Diesel injection pump test bench • Operation: Mechanical / analog • Applications: Inline injection pumps Rotary/distributor pumps • Includes: High-pressure lines Gauge cluster Pump mounting platform _____ Condition • Used / untested • Cosmetic wear, oil residue • Sold as-is Ijlhcdwjyx Sihj Hoba

Condition: used, Year of construction: 2012, functionality: fully functional, For sale: EFCO Maschinenbau PS 15 Valve Testing Bench. The bench is pre-owned and in excellent working condition. It is currently connected and can be inspected and tested on-site. EFCO PS series test stands are designed for pressure and tightness tests on various types of valves. Suitable for testing shut-off, control, and safety valves. Specification: Model: EFCO PS 15 Vertical Test Bench Clamping Force: 15 t Suitable for testing: Shut-off valves, control valves, safety valves Ibjlhcdjy R N A Asw Hja Working Range: DN 50–600 DN 2″–24″ The working range can be extended using external testing Test Pressure: Water up to 1380 bar (20000 psi) Air / nitrogen up to 300 bar (4350 psi) Quick specimen clamping Convenient and safe operation Robust industrial frame More information: EFCO PS 15 Professional German equipment suitable for repair workshops, energy, oil, gas, and industrial companies. If you have any further questions, we will be glad to assist you.

Year of construction: 1999, condition: good (used), The machine has been produced in the late 1990's. Very little usage (it has been stored in a warehouse). Located in Tata, Hungary. No warranty. 1800 bar Cr pump with injector Test bench with 15 kW power, 12 measuring points, flow-through water cooling KMA flow meter system with 2 flow meters. The bench has a separate lubricating oil pump with lubricating oil supply Iolstw S Awjhcdw Hjba Speed range from 0 to 4000 f/min. Equipment: - Bosch Cr pump control test in safety, protective cage - Bosch magnet coil injector testing, coding - optional testing of piezo injectors - option to repair and test CP2 pumps Testing and coding is performed using Bosch factory software and database. Bosch Esi subscription required The test bench is in good condition and has been operated with regular calibration. For sale due to site closure.

Condition: new, TURBO-BOOST-TEST turbocharger boost testing bench allows for professional turbocharger calibration and performance evaluation. The test bench can be used in turbine tuning and refinement, in the manufacture of hybrid turbines, to test changes in turbine performance after tuning. Our test benches are advanced systems for turbocharger tuning and testing in dynamic mode. Its provide turbocharger testing under near realistic operating conditions, ensuring full process control and detection of any potential problems, including oil leaks. HIGHLIGHTS • Complete finish testing and tuning of automotive turbochargers for engines up to 3 liters • Dynamic turbocharger testing • Installation on the regular surfaces of fastening • Running in and check on an oil leak • Tuning of electronically driven turbos is done by connecting to an external tester ATP-3000 • Installation of turbochargers of any design KEY FEATURES • More than 2000 turbo references database • Calculate turbocharger performance; • Plot supercharging vs. inlet and outlet flow graph; • Generating the resulting graph; • Testing of actuator performance: vacuum, pneumatic and electric types; • Diagnosis of servo-drives of electric actuators (optional); • All measurements are done in real time. • Calibration of the test bench before starting work • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Boost Test software. • Creation and printing of reports on the tuning process. • Self-diagnostics SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Iolhcjttg S Usdw Heba Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1330 х 770 х 1440 mm Weight 265 kg

Condition: like new (used), overall weight: 40 kg, number of drawers: 15, clamping range: 22 mm, Equipment: documentation/manual, قوالب مصنع فاين صناعه المانيه Islezp Snishcdw Hsba

Year of construction: 2025, condition: new, GeoBoost-7000 Combined bench for turbocharger geometry calibration and performance evaluation. Ibjlhcdwevtn Hme Hoa Stand for static and dynamic calibration and testing of turbocharger. It has a combined two-position design, which allows testing the turbocharger in two modes - rapid static calibration of turbocharger geometry - Full dynamic diagnostics at different operating modes GeoBoost-7000 will allow you to carry out professional testing of turbocharger operation during repair, tuning or modernization. The availability of two working zones of the machine depending on the testing method helps to carry out comprehensive diagnostics. HIGHLIGHTS • Simulates real-world operating conditions for accurate turbocharger diagnostics and tuning. • Flexible and versatile to work with a variety of turbocharger models. • All types of turbochargers can be installed using the accessories provided. • Oil leak testing using heated oil and compressed air. • N75 turbocharger control valve testing. KEY FEATURES - Ability to adjust the extreme position of the blades of the air flow control mechanism. - Adjusting the length of the stem to adjust the actuation torque of the air flow control mechanism. - Real-world turbocharger testing; - Real-time geometry tuning; - Performance testing of actuators: vacuum, pneumatic and electric types; - Diagnosis of servo-drives of electric actuators (optional); - Post-assembly testing of the turbocharger for oil leakage; - Availability of a high capacity vacuum pump to create the required vacuum and air flow. - Testing the turbine according to the manufacturer's test plan; - Calculate turbocharger performance; - Plot supercharger inlet and turbocharger outlet boost vs. flow; - Construct the resulting graph; - Generate and print test reports. SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1700 х 900 х 1500 mm Weight 400 kg

Condition: excellent (used), Primus Engineering Ibslhcjzgbtijdw Hsa Type: DST 350 This testing equipment was designed for performing IP protection class tests for "dust" according to, for example, DIN 40050 Part 9 and DIN EN 60529. The testing equipment is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controls Predefined test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical power: Max. 5 kW Connection voltage: 400V/50Hz 3-N/PE (16A CEE socket) Dimensions: Width approx. 920 mm, Depth approx. 710 mm, Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm, Depth approx. 650 mm, Height approx. 770 mm Volume approx. 350 l Weight: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25 % rel. to 75 % rel., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected IP5X and IP5KX Dust-tight IP6X and IP6KX with and without vacuum Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by phone.