Used Tensile Test for sale (10,960)

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) Nedsziizmepfx Aqwjlf External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: excellent (used), CTS Climate Test Chamber Type: C -40/600, Air-Cooled (converted to R-452a refrigerant) Test chamber volume: 600 liters Temperature tests: - Temperature range: -40°C to +180°C Nledpsziizgsfx Aqwsf - Temperature deviation: ±0.1 K / ±0.3 K over time (at stabilized condition) - Average temperature rate of change (without test load and radiant heat): - Heating: 2.5 K/min - Cooling: 3.0 K/min - Maximum radiant heat input: 2500 W at +20°C Climatic tests: - Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Chamber internal dimensions (approx.): Height: 850 mm, Width: 850 mm, Depth: 830 mm External dimensions (approx.): Height: 1900 mm, Width: 1115 mm, Depth: 1850 mm Refrigerant: R-452A Power connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for your purchase! The following checks and procedures are performed on all our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), Vötsch Type: VT 3050 Modules / Test Chamber Temperature Chamber Air-cooled Nljdpfx Aeziizajqwof Test chamber capacity 500 litres Temperature range -30°C / +100°C Temporal temperature fluctuation K ±0.5 Spatial temperature fluctuation K ±1.5 Temperature gradient K 3 Change rate Heating K/min 2.0 Cooling K/min 1.4 Heat compensation max. W 650 Calibration values +23°C +80°C Test chamber dimensions Width 710 mm Depth 590 mm Height 1250 mm External dimensions Width 940 mm Depth 1030 mm Height 1955 mm Sound pressure level db(A)

Year of construction: 2020, condition: excellent (used), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: designed for a maximum load of 250 kg Specifications for temperature testing: Temperature range: -55 to +180°C Temporal temperature fluctuation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Heating compensation: max. 8000 W Specifications for climate testing: Nlsdjziiypjpfx Aqwjf Temperature range: +10 to +95°C Humidity range: 10 to 98% RH Climate performance data (excerpt) Humidity range: 10 to 98% relative humidity (RH) Humidity deviation (temporal): At chamber center, in steady-state condition, depending on climatic setting: ±1 to ±3% RH Temperature deviation (temporal): At chamber center, in steady-state condition, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to the setpoint (in the range > 20% RH): ±0.5 to ±1 K Operational data: LED strip: 24 V, 6.8 W / 2 x Halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10%, 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A Chamber is equipped with Greenmode Weight: approx. 2050 kg Buyer Safety Information! The following steps are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and error!) For further questions, we are happy to answer your call.

Condition: excellent (used), Vötsch Model: VTS 7018-5 Water-cooled Temperature Test Chamber System retrofitted with R-452A Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 7.5 K/min Temperature change rate heating: 7.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10.0 kW, Rated current: 21 A Main fuse (on-site): 32 A slow-blow Sound level at 1m distance (free-field measurement): < 69dB (A) Side port: 50 mm / 125 mm Chamber is water-cooled Refrigerants: R-452A and R 23 Weight approx. 460 kg For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, new charging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Nledpfxoziixxj Aqwof Condition: used Scope of delivery: (See picture) (Technical data may be subject to change or error!) If you have any further questions, we will be happy to answer them by phone.

Condition: excellent (used), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rates: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal ± 0.8 K Spatial ± 2.0 K Heat compensation max. 8000 W Specifications for Climatic Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% rH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% rH Temperature uniformity: Spatial ± 1.0 K Heat compensation max.: 500 W Test chamber volume: 2,160 liters Test chamber dimensions: Height 1,115 mm, Width 1,400 mm, Depth 1,400 mm External dimensions (lowered): Height 2,318 mm, Width 1,860 mm, Depth 3,658 mm External dimensions above shaker: Height 2,710 mm External dimensions max. stroke height: 3,038 mm Exchangeable floor dimensions: Width 1,600 mm, Depth 1,504 mm Operating Data: Rated voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2,100 kg Important information for your safety as a buyer: The following points will be carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components Nledeziixrepfx Aqwef 2. If required, refilling with refrigerant compliant with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer any further questions you may have by phone.

Condition: good (used), Zwick Type: BT2-FZ0.5TS.D16 500 N + Xforce P 500N Materials Testing Machine Test force in tension/compression: 500 N Overall height, without head traverse: 789 mm Nledpsziixljfx Aqwef Overall width: 411 mm Overall depth: 622 mm Footprint: Net standing area: 0.008 m² Load frame base area: 0.196 m² Specific floor load: Based on typical equipment: 0.85 kg/cm² With 50% safety margin: 1.28 kg/cm² Ceiling load: Based on typical equipment: 97 kN/cm² With 50% safety margin: 146 kN/cm² Working space depth: 105 mm Working space height with upper mounting bracket: Minimum height: 235 mm Maximum height: 565 mm Working space height with lower mounting bracket: Minimum height: 90 mm Maximum height: 420 mm Weight: approx. 78 kg with extras Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications are reserved!) We are happy to answer further questions by phone.

Condition: excellent (used), Heraeus Vötsch Type: VT 7021 Air-cooled temperature test chamber 1 port, nominal width 80 mm, Test chamber volume: 210 liters Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (heating): 2.5 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 800 W Test chamber dimensions: Width 560 mm, Depth 570 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Electrical connection: 1/NPE AC 230 V ± 10% 50 Hz Rated power approx. 1.8 kW, rated current 12 A Refrigerant: R404A and R23 Weight: 355 kg For your safety as a buyer, please note the following information! The following procedures are performed on the chambers we offer, in advance: 1. Functional check and replacement of necessary components Nljdpfxsziiw Ij Aqwef 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the details!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Weiss Type: WK3-340/70 Weiss Climate Test Chamber, Air-Cooled Control Panel: "Touch Panel" All control and operating commands can be initiated on the "Touch Panel" control panel by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and to ensure adequate ventilation of the machine, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber. Feedthroughs installed as standard: R1: 125 mm diameter L1: 85 mm diameter Volume: 335 liters Test chamber dimensions: Height: 750 mm, Width: 580 mm, Depth: 765 mm External dimensions: Height: 1775 mm, Width: 870 mm, Depth: 1600 mm Data for temperature tests: Minimum temperature: -72°C Maximum temperature: +180°C Temperature deviation, over time: ± 0.1 to ± 0.5 K Temperature homogeneity, spatially: ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Data for climate tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation, over time: ± 0.1 to ± 0.3 K Temperature homogeneity, spatially: ± 0.5 to ± 1 K Humidity deviation, over time: ± 1 to ± 3% RH Data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A, Rated power: 4.9 kW Fuse: 16 A slow-blow (to be provided by the customer) Nljdpfxjziiwue Aqwef Refrigerant: R-452A/R23 Weight: Approx. 585 kg For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Dr. Wiesner Type: INTEGRA DDV -1...1 bar Item Description: Dr. Wiesner Integra leak testing system The classic – for all common testing methods The leak testing system for industrial leak and flow tests with a fully graphic color display up to three independent test circuits can be operated 255 test programs can be stored automatic process optimization autoTune (option) Communication via flexibly interchangeable bus coupling modules freely programmable fixture control freely programmable special test sequences The device is suitable for tests using the relative and differential pressure methods with overpressure. Special versions: none Technical data: Electrical supply: 110 ... 230V~; 50 ... 60Hz (connection via power cable to plug XO) Pneumatic: clean and dry compressed air max. 7 bar (to connection P) Pressure range: 0 ... 1000 mbar, electronically controlled Measuring ranges Relative pressure: 0 ... 1000 mbar Differential pressure: +20 mbar Resolution: 0.1 Pa Internal volume: 13 cm³ test circuit 15.0 cm³ reference circuit Electrical interfaces: 3x serial RS232 (COM1; COM2; COM3) 1x digital I/O (X1) Pneumatic: Connection for test object (Test) Njdsziiv Dopfx Aqwslf Connection for reference circuit (Ref.) Housing Degree of protection: IP40 Dimensions: 450x185x380mm (WxHxD) Weight approx. 15.5kg Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 1990, condition: good (used), Offer 25223 Njdjwu Sxnopfx Aqwjlf Technical data: (non-binding) - Test panel for wall mounting with various test devices - Space requirement: W 600 x H 850 x D 300 mm - Weight: 40 kg

Year of construction: 1990, condition: good (used), Offer 26136 Technical data: (non-binding) - Test panel for wall mounting with various testing devices - Required space: W 600 x H 750 x D 300 mm Njdpfxjy Nldgo Aqwjlf - Weight: 40 kg

Condition: excellent (used), max. wheel diameter 200 mm gear width 300 mm module 0,5 - 25 centre distance 750 mm weight of the machine ca. 0,2 t dimensions of the machine ca. 0,8 x 0,6 x 0,6 m Nsdpsy Umi Isfx Aqwelf worm testing roll-machine

Condition: excellent (used), EDAG EDAG Huf Endurance Test Stand Intended use: This test stand is intended exclusively for testing components that are capable of rotational and/or translational movement within the scope of an endurance test and within the limits of the following technical specifications. Technical data: Dimensions: Width 1565 mm x Depth 615 mm x Height 1655 mm Weight approx. 450 kg Operating voltage 400V / 50Hz Control voltage 5, 24 Preliminary fuse 16 A Testing device: Nedpfx Aqjzh U Rdowolf Maximum stroke 194 mm Maximum axial force 500 N Maximum torque 5 Nm Breakaway force (manually operated slider) 15 N Displacement force (manually operated slider) 10 N Other equipment: P4, 24" TFT monitor (1900 x 1080) Operating system: Windows XP Measurement and control software: LabVIEW 2011 PC plug-in cards: 1 card, NI PCI-6251, 1 card, N1 PCI-7044 Drawer: 500 mm (full extension with automatic closing) Additional load: 500 N Drawer cabinet, lockable: 3 drawers The teach-in endurance test stand is a device for carrying out endurance tests on test objects that can rotate and/or move translationally, e.g., cylinder locks, door handles, key functions. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports Nlsdpfx Ajzh Huhsqwjf The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chamber-type testing equipment with a 1000-liter test chamber volume for salt spray tests. Constamatic® TR This series includes automatically controlled chamber-type testing equipment of type A-TR. The internal device control is operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical data: Device type: S 1000 A-TR External dimensions of the housing: (W x D x H in mm) 2600 x 1120 x 1210 Internal dimensions of the test chamber: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. load of the sample holder: 10 kg / shelf 10 kg Operating voltage: 230 V +6/-10% Connected load S: 2700 W Nodpfx Aszh Ht Rsqwelf Control range for humidification S: up to 70°C Control range for test chamber K: up to 50°C Control range for test chamber S: up to 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Over-temperature protection: yes Volume of test chamber: 1000 liters Stock of test solution: approx. 150 liters Test solution consumption / hour: approx. 0.7 – 1.0 liters Water filling of the base pan: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), CTS Type: T-40/600 /011232 Nledpozh Htwjfx Aqwjf CTS Temperature Test Chamber, Water-Cooled Including metal struts to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in the stabilized state according to IEC 60068-3-5, depending on the test chamber temperature ± 1 K over time Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Nlodpozh D S Rsfx Aqwsf Water level = -10 mm The water level is below the support grid Water level = 0 mm The water level is at the top edge of the support grid Data for spray device, standard Number of spray nozzles 6 Spray volume per nozzle 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles 6 Spray volume per nozzle 4.5 l/min Additional flooding nozzles 2 Spray volume additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Data for water tank with preheating Volume approx. 2000 l Temperature range for preheating +5°C to +40°C Temperature change duration Cooling from +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left Test chamber volume: approx. 500 liters Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, on-site Weight approx. 890 kg net For your safety as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Zwick / Roell Type: LTM10 Maximum testing frequency: 100 Hz, depending on the amplitude Dynamic testing force in tension/compression: 10 kN Nedpfx Aqjzh D R Howolf Static testing force in tension/compression: 7 kN Piston stroke: 60 mm Positioning and repeatability accuracy: +/- 2 µm Speed range: 1 mm/min - 1 m/s Testing space height without force sensor: 1170 mm Weight with linear motor: 1065 kg (without control unit) Maintenance: according to maintenance instructions, partially performed by Zwick/Roell Accessories: Screw chucks, software (TestXpert research) Connection: 400V 50/60 Hz 32A 3Ph/PE Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Chamber, Water-Cooled (Test chamber, explosion-proof) INERTIZATION WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Test chamber volume: approx. 600 liters Cold/Heat operation: -70 to 180°C Climate operation: 10 – 95°C Humidity: 10...98 % RH Temperature change per unit of time: Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Fuse (on customer's side): 32 A, slow-blow Permissible weight of test specimens: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (Evaporator of the air conditioning system has been replaced) For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: Nodpfxozh D Rys Aqwjlf 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Weiss Type: SWT 200/400 Weiss spray and splash water test cabinet This cabinet is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Features Glass door with wiper Pneumatic drive of the swivel nozzle Adjustable swivel angle Replaceable swivel nozzles Nozzle holder swivels and is replaceable Nljdpfx Ajzh D Rmoqwjf Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Max. load with test specimen (evenly distributed over the area) Permissible test specimen weight for the test specimen holder (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection class tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Weight: 375 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: good (used), CTS Type: T-70/600/S Water-cooled temperature testing chamber Refrigerant: Converted to R-452A Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Nsdpfx Aszh D E Roqwelf Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions: height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions: height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: good (used), Year of construction: 2022, functionality: fully functional, overall weight: 125 kg, input voltage: 230 V, total length: 1,500 mm, total height: 1,000 mm, total width: 700 mm, Equipment: documentation/manual, Siemens S7 PLC training and testing system AP2, electronics technician for automation technology – conveyor system Manufacturer: Stepp Fabrikautomation GmbH & Co. KG Year of manufacture: 2022 Control system: Siemens S7 PLC Description: For sale is a complete, professionally manufactured training and testing system for training in the field of electronics/automation technology. The system was manufactured by Stepp Fabrikautomation GmbH & Co. KG as a special machine and is used for the practical execution of tasks for the final examination, part 2 (AP2), for electronics technicians for automation technology. The module enables the complete execution of an automation task, from electrical wiring to PLC programming, commissioning, and troubleshooting. Technical equipment: Siemens S7 PLC control system Complete control cabinet with industrial wiring Voltage supply and protection technology Input/output circuitry Control of a conveyor system Motor drive with power unit Sensors and actuators Operating and signaling elements Terminal and documentation system Nljdpfxezp Iqmo Aqwef Areas of application: Training for electronics technicians for automation technology AP2 examination preparation Vocational schools and technical training centers In-house training and further education Advantages: Industrial design based on special machine construction Not a simple training system, but a practice-oriented machine design Realistic simulation of an automation task Ready for immediate use Ideal for training apprentices Condition: Very good condition, year of manufacture 2022, fully functional. Scope of delivery: Complete testing/training module Control cabinet Conveyor system PLC control system Existing documentation

Condition: excellent (used), Kübrich Kübrich Test Systems 48V Belt Starter Generator - Component Test Bench Details of the test bench: (See Figure 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for control, interface panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measuring technology box (9) H4: Interface box Intended use: The test bench is used for conducting tests on belt starter generators during development. Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (briefly, less than 1 s) Control voltage: 24 V Mechanical performance data according to the data sheet of the load machine Note that a gear ratio of 1:2 to the test specimen shaft must be observed. Rotational speeds: Load machine: Manual operation: 0 - 50 1/min Automatic operation: 0 - 10,000 1/min Test specimen motor: Manual operation: 0 - 100 1/min Automatic operation: 0 - 20,000 1/min Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Condition: used Nlodpfx Ajzhkb Sjqwjf Scope of supply: (See Figure) (Changes and errors in the technical data and details are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), H. Köhler HK 300 S Condensation Water Test Device Manufacturer: H. Köhler GmbH Type: HK 300 S Machine Type: Condensation Water Test Device / Corrosion Test Chamber Test Chamber Volume: approx. 300 l For sale is a used H. Köhler HK 300 S condensation water test device. The device is suitable for condensation water climate tests according to DIN 50 017, corrosion tests, coating tests, paint tests, material testing, and quality assurance. Technical Data Test chamber volume: approx. 300 l Temperature range: Room temperature to approx. +55 °C Humidity range: Saturation operation possible Test chamber heating: 1,000 W Power connection: 230 V / 50 Hz Connected load: 1,000 W Compressed air consumption during ventilation: approx. 3 Nm³/h Compressed air connection: 4.5 - 7.0 bar Deionized water connection: 2.5 - 4.0 bar Dimensions (W x D x H): approx. 1,200 x 600 x 1,750 mm Weight: approx. 100 kg Control HK PC102 control unit LCD display Programmable test sequences Condensation water climate DIN 50 017 Manual operation / test operation Alarm display Equipment Stainless steel test chamber Large glass door with seal Test chamber thermometer Manometer Ventilation system Compressed air connection Deionized water connection Drain connection Stainless steel base with rollers Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Display shows condensation water climate DIN 50 017. No documentation available. Scope of supply H. Köhler HK 300 S Condensation Water Test Device Stainless steel base Accessories as shown in the pictures Njdpszhadcsfx Aqwjlf Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.