Used Material testing for sale (495)

Year of construction: 2022, Condition: excellent (used), White Type: T/800/70/10 Water-cooled External dimensions (HxWxD): 2085 x 1415 x 2810mm Test room dimensions (HxWxD): 950 x 1100x 800 mm Volume: 800 liters Minimum temperature: -72 °C Maximum temperature: +180 °C Temperature change rate, cooling: 12.0 K/min Temperature change rate, heating: 12.0 K/min Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±2.0 K Temperature gradient: ≤2.0 K Heat compensation, at +20 °C: 8000 W Power connection 3/N/PE AC 400 V ±10% 50 Hz or 3/N/PE AC 440 V ±10% 60 Hz Csbevxrwgs Hn Tn Regt Rated power: 30 KW Rated current: 57 A Operating hours: approx. 10 (never used) Condition: used Weight 1600 kg Scope of delivery: (See picture) Sold ex location! (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Smoke extraction hood with burner, gas furnace, laboratory furnace, kiln Cjb Hewhbgzjn Tn Rjgt -Smoke extraction hood: with burner, without extraction fan -Interior: W/D/H 690/400/580 mm -Accessories: see photos -Dimensions: 730/425/H1015 mm -Weight: 71 kg

Condition: good (used), Robust universal hardness tester suitable for Rockwell, Vickers, and Brinell measurements. Sturdy machine stand designed for rugged everyday use. Measuring systems: - Measuring head with ground glass - Rockwell with dial Test height 300 mm Test depth 150 mm Hardness tester dimensions L x W x H 610 x 350 x 940 mm, without base frame Cob Hswg R Then Tn Rjgt Machine weight approx. 260 kg

Year of construction: 2020, Condition: excellent (used), machine/vehicle number: 112033, Information: Cgeb Hnswhaw Se Tn Rst - including reference database of the Lüdenscheid Plastics Institute (2021)

Year of construction: 2024, Condition: as good as new (ex-display), Universal testing machine PM10 Force: 10 kN cross beam stroke: 700 mm Installation space: 400 mm total height: 1230 mm Cgeb Hned R Dpme Tn Ret Weight: ca.85 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 10kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: excellent (used), Vötsch Type: VTL 60/60 The Vötsch VTL 60/60 is an industrial heating and drying cabinet, specifically designed for the safe drying of coated materials, such as paints and resins. It meets the safety requirements of EN 1539 and is therefore suitable for processes where flammable solvents may be released. Technical specifications: Usable volume: 0.216 m³ (600 × 600 × 600 mm) Nominal temperature: 250 °C Cgeb Hn Tswgcxcjn Rot Maximum heating surface temperature: over 750 °C Nominal power: 7.2 kW Connected load: 8 kW Minimum exhaust air flow rate: 102 m³/h External dimensions (L × W × H): 1150 × 1000 × 1700 mm Weight: approx. 250 kg Safety features: The VTL 60/60 is equipped with a powerful recirculation fan, which ensures even temperature distribution and effective dilution of solvent vapors. This prevents the formation of explosive atmospheres and ensures safe operation. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2025, Condition: new, Universal testing machine PM50 Force: 50 kN cross beam stroke: 1200 mm Installation space: 400 mm Overall height: 1817 mm Weight: ca.380 Kg Travel resolution: 0.01 mm Testing speed: 0.03-1000 mm / min Return speed: 1000 mm / min Force transducer: 50 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: Cgebjd R Dp Ej Hn Tn Rst - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: used, Heraeus Vötsch Type: VT 4021 Heraeus Vötsch Temperature Test Chamber, Air-Cooled Housing dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Interior: Width 560 mm, Depth 570 mm, Height 630 mm Temperature range -40°C to +180°C Temperature deviation over time ±0.2 to ±0.5 K Temperature deviation over space ±0.5 to ±1.5 K Temperature change rate cooling: 3.1 K/min Temperature change rate heating: 2.5 K/min Rated voltage: 1/N/PE AC 230V±10% 50Hz Rated power: 1.5 kW, Rated current: 7 A 1 x side feedthrough 90 mm Refrigerant: R-404A Weight approx. 325 kg / Volume 210 liters For your safety, please note the following information! The following steps are carried out on our chambers in advance: Cob Hnewga Rco Tn Regt 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2024, Condition: as good as new (ex-display), Universal testing machine PM5 Force: 5 kN crosshead stroke: 520 mm Cgobsd R Dqbo Hn Tn Ret working chamber depth: 66 mm total height: 1036 mm Weight: approx.48 Kg travel resolution: 0,01 mm test speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 5 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, so that a "quick test" can also be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This enables you to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & Commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping fixtures: Pressure plates, bending fixtures, shear fixtures, wedge grips, shear grips, peeling grips, screw grips, pneumatic grips and hydraulic grips.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Cgsb Hjwgayken Tn Rjt Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2024, Condition: as good as new (ex-display), Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Cgeb Hn Tod R Dpuon Rot Travel resolution: 0.01 mm testing speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: good (used), White Type: SC/KWT 450 Salt Spray Chamber Technical Specifications: Test chamber capacity: 450 liters Max. load: 100 kg Brine storage tank: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Areas of application: Corrosion tests: Salt spray test: Room temperature up to +50°C Condensation test: Room temperature Up to +45°C Humidifier +75°C Temperature stability The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW, Rated current 8.7 A Combination: Salt spray test SS: DIN 50021 Condensation test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Cob Hn Tnewganns Rsgt Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Cgsb Hn Tewf Dzvsn Ret Chest-mounted units with a 1000-liter test chamber volume for salt spray testing. Constamatic® TR This series includes automatically controlled chest-mounted units of type A-TR. The internal controls are operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical specifications: Device type: S 1000 A-TR External housing dimensions: (W x D x H in mm) 2600 x 1120 x 1210 Internal test chamber dimensions: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. sample holder load: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Power consumption S: 2700 W Humidity control range. S: up to / 70°C Test chamber control range K: up to / 50°C Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution storage capacity: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 - 1.0 liters Water filling of base pan KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chest-mounted units with a 1000-liter test chamber volume for salt spray testing. Constamatic® TR This series includes automatically controlled chest-mounted units of type A-TR. The internal controls are operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical specifications: Device type: S 1000 A-TR External housing dimensions: (W x D x H in mm) 2600 x 1120 x 1210 Internal test chamber dimensions: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. sample holder load: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Power consumption S: 2700 W Humidity control range. S: up to / 70°C Test chamber control range K: up to / 50°C Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Cgebewf Dh Ne Hn Tn Ret Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution storage capacity: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 - 1.0 liters Water filling of base pan KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Includes metal struts to increase the floor load-bearing capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety, please note the following information! Cgeb Hewfdnijn Tn Ret The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), TIRA Type: TCC 7120 Temperature range: -75°C / +180°C Air-cooled condenser Temperature stability (over time and in the center of the usable space) ±0.1°C ... ±0.3 °C Maximum temperature change rate Heating: 4°C/min Cooling: 3°C/min Humidity range: 10% to 98% relative humidity Humidity stability over time ±1% ÷ ±3% Dew point range for long-term tests +2 / +94 °C Dew point range for short-term tests -20 / +2 °C External dimensions (L x D x H) 1320 x 2235 x 2137 mm Test space dimensions (L x D x H) 1000 x 1130 x 1020 mm Test chamber volume: approx. 1152 liters Max. load per grid: 50 kg Maximum floor load of the test chamber: 100 kg Refrigerants: R404A and R23 Power supply: 400V + 6%/-10% / 50Hz / 3P+N+PE Rated power: 10.2 max. 17.5 kW Cgob Howfddwjn Tn Rjt Rated current: 19.5 max. 32.0 A Noise level: approx. 80 dB(A) Weight: 1180 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Air-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Ceb Hn Tewd Iizsn Rogt Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 4.1 kW Nominal current: 14.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VT 4034 Vötsch Temperature Cabinet VT 4034 Air-Cooled Refrigerant: Converted to R-452 A Internal dimensions: Height 750 mm, Depth 765 mm, Width 580 mm External dimensions: Height 1780 mm, Depth 1595 mm, Width 865 mm Temperature range: -40°C to +180°C Temperature deviation: temporal ± 0.1 to ± 0.5 K spatial ± 0.5 to ± 2.0 K Heating 3.2 K/min Cooling 3.5 K/min Maximum load (evenly distributed across the surface) of the test chamber floor: 60 kg per insert: 30 kg Total load of the grate supports: 80 kg Test chamber lighting: 24 V halogen bulb 50W Rated voltage: 3/N/PE AC 400V ± 10% 50 Hz Rated power: 4.1 kW Ceb Hnewd Hpas Tn Rsgt Rated current: 12.5 A Fuse provided by the customer: 16 A slow-blow Refrigerant: R-452A Weight: 490 kg / 335 liters For your safety, the following information! The following steps are carried out on our chambers in advance: 1. Functional test and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Espec Type: TSA-202E-W Temperature Shock Chamber, Water-Cooled Cold Chamber: -55°C to 0°C Hot Chamber: +50°C to 200°C System: Two-zone test with damper control Temperature fluctuation ±0.5°C Hot Chamber: Temperature heating time: Ambient temperature (20°C) to +200°C within 15 minutes. Cold Chamber: Temperature reduction time: Ambient temperature (20°C) (20°C) to -55°C within 35 minutes. Temperature recovery: within 5 minutes. Internal dimensions (W x H x D mm): 650 x 460 x 670 External dimensions (W x H x D mm): 1550 x 1900 x 1670 Approx. 200 liters Power supply: 400 V AC 50Hz: 65 A Refrigerant: R404A 5 kg R23 2.0 kg Weight: Approx. 1200 kg For your safety as a buyer, please note the following: The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate Cebewc R A Is Hn Tn Rsgt 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Cgeb Howc Nvgjn Tn Ret Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Zwick Roell Type: Z100 TEW Technical Data Item No.: 1004501 Test force Fmax: 100 kN Test Chamber Test chamber height: Total height: 1934 mm Cob Hjwcqrpjn Tn Rjgt Height of lower test chamber, without fixtures: 1755 mm Height of upper test chamber, without fixtures (additional crosshead required): 1800 mm Test chamber width: 640 mm Load frame Load frame height: Height without support profiles: 2169 mm Height with support profiles: 2284 ... 3094 mm Load frame width: Width without support profiles: 960 mm Width with support profiles: 1136 mm Width with support profiles and machine electronics: 1329 mm Load frame depth: Depth: 140 mm Depth without Stand profiles, with drive base: 584 mm Depth with stand profiles: 781 mm Weight: with machine electronics without stand profiles, approx.: 470 kg optional stand profiles (one pair), approx.: 34 kg with typical fixtures, approx.: 570 kg Installation area: pure footprint: 0.01 m2 Load frame footprint: 0.867 m2 Specific floor load: based on typical fixtures: 559 kN/m2 with 50% safety: 839 kN/m2 Ceiling load: based on typical fixtures: 6 kN/m2 with 50% safety: 9 kN/m2 Paint finish: RAL 7021 and RAL 7038 Ambient temperature: +10 ... +35 °C Relative humidity (non-condensing): 20 ... 90% Average sound pressure level At vmax measured at a distance of 1 m from the front of the machine: 66 dB(A) Drive Crosshead speed vmin ... vmax 0.0001 ... 1500 mm/min Crosshead return speed, max.: 2500 mm/min Deviation from the set drive speed, max.: 0.05% of vact Drive travel resolution: 0.484471 nm Positioning repeatability (without direction reversal): ±2.0 μm Controller: adaptive Remote control testControl II Safety device Force transducer 100 kN Type: Xforce K Hydraulic power unit Height: 584 mm Width: 502 mm Depth: 817 mm Hydraulic specimen holder Max. test force (Fmax): 70 kN Max. clamping force (at 300 bar): 110 kN The hydraulic specimen grips are designed for tensile, compression, and alternating load tests (static, tensile, pulsating) and are suitable for the following applications: Application Area - Specimen Material: Ferrous and non-ferrous metals, structural sheets, sintered metal materials, hard metals, metal-ceramic composites, hard and reinforced plastics, composite materials, similar materials - Specimen Shape: Flat specimens, round specimens (strips and shoulder specimens), especially small specimens with short clamping lengths - Loading Type: Tensile, compression, alternating load MakroXtens Extensometer Drag Force: ≤ 0.05 N Clamping Force of the Sensor, Manually Adjustable: 0.1 ... 2 N Resolution in conjunction with: 300 mm lever arm length: 0.006 μm 450 mm lever arm length: 0.009 μm 600 mm lever arm length: 0.012 μm Maximum initial gauge length: up to 100 mm Maximum sample width: 60 mm Maximum sample thickness/diameter: 30 mm Dimensions: Height: 375 mm Width: 167 mm Depth: 375 mm Test software: testXpert 3 v1.2 Year of manufacture: 2018 Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VC 7034 Climatic Test Chamber with Humidity and Air-Cooled Touch Panel Powerful 32-bit Control, Monitoring, and Regulation System Technical Description: Characteristics for Temperature Tests: Temperature Range -70°C to +180°C Temperature Deviation in Steady State according to IEC 60068-3-5, depending on the test chamber temperature temporally ±0.1 to ±0.5 K spatially ±0.5 to ±2.0 K Temperature Rate of Change according to IEC 60068-3-5 Heating: approx. 3 K/min. Cooling: approx. 2 K/min. Heat compensation max. approx. 1000W Characteristics for climatic tests: Temperature range +10°C to +95°C Temperature deviation in steady state according to IEC 60068-3-5 depending on the test room temperature temporally ±0.1 to ±0.3 K spatially ±0.5 to ±1.0 K Distance between measuring points and wall: 100 mm Humidity range 10% to 98% RH Dew point range -3°C to +94°C Humidity deviation in steady state, depending on the climatic value temporally ±1.0% RH to ±3.0% RH Heat compensation 400W at 25°C to 90°C Humidity up to max. 90% RH F. is maintained Data for installation and operation: Cgsb Hnowck Dls Tn Rst Test chamber: Width 580 mm, Depth 765 mm, Height 750 mm Housing (installation dimensions): Width 865 mm, Depth 1595 mm, Height 1780 mm Penetrations 1 50 mm diameter penetration installed on the left 1 125 mm diameter penetration installed on the right Test chamber volume: approx. 335 liters Refrigerant R-452a + R23 Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 5.9 kW Nominal current approx. 12.0 A (neutral conductor loaded) Fuse protection 16 A slow-blow, on-site Weight approx. 500 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS Type: TW -60/9 Temperature test cell water-cooled CTS temperature test cell type TW -60/9 T means: Temperature W means: Walk in -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and Cgjb Hsvb E Uqjn Tn Rst with heat radiation measured in the supply air. Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: TW -60/9 Temperature test cell water-cooled CTS temperature test cell type TW -60/9 Cebovb Hanj Hn Tn Rogt T means: Temperature W means: Walk in -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and with heat radiation measured in the supply air. Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VT 7012 S2 Water-cooled Two-chamber design Hot chamber: The temperature range of the hot chamber is from +50°C to +220°C. Temperature deviation over time in the center of the chamber is ± 1 K. Temperature deviation over space is ± 2 K. Temperature change rate: Heating: 11 K/min. Cold chamber: The temperature range of the cold chamber is from -80°C to +70°C. Cjb Hn Towb Dqion Rsgt Temperature deviation over time in the center of the chamber is ± 1 K. Temperature deviation over space is ± 2 K. Temperature change rate: Heating: 2 K/min. Cooling: 3 K/min. Test chamber volume: 125 liters. Hot chamber temperature range: +50°C to +220°C. Cold chamber temperature range: -80°C to +70°C. Test chamber dimensions: Width: 470 mm. Depth 650mm Height 410mm External dimensions: Width 930mm Depth 2115mm Height 1970+mm Plug-in diameter 67mm Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 10 kW Rated current 25 A Refrigerant R404A / R23 Weight: 1000 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.