Used Tb 13 5 E for sale (99,786)

Condition: excellent (used), Year of construction: 2018, operating hours: 1,888 h, functionality: fully functional, overall weight: 1,070 kg, load capacity: 110 kg, arm reach: 3,010 mm, pivoting range: 360 °, input voltage: 500 V, input current: 38 A, type of input current: three-phase, Equipment: documentation/manual, 2x Comau C5G ACC3-E with Comau Smart-5 NJ 110-3.0 Robot Arm Two industrial Comau robots, manufactured in 2018, offered as a complete set. Dkjdezzw Ufspfx Acysw Asking price for the complete set: €15,000 Operating hours: Robot 1 – C5G hour meter: 1,888:56 hours Robot 2 – C5G hour meter: 2,035:58 hours Controller specifications: Controller: Comau C5G ACC3-E Robot arm: Comau Smart-5 NJ 110-3.0 Protection rating: NEMA 12 / IP54 Controller weight: 125 kg Main switch interrupting capacity: 6 kA Interrupting voltage: 500 V Power supply: 400–500 V Phases: 3 Frequency: 50/60 Hz FLA cycle/max.: 15/38 A Transformer rating: 12 kVA Both robots are currently in operational condition. If you have any questions or require additional information, please feel free to contact us.

Condition: ready for operation (used), Year of construction: 2018, L&Z Lathe / DMTG - Dalian CW6163E / 5 - Meter Turning Length -Year of manufacture: 2018 -CE marking -Turning diameter over bed: 630mm -Turning diameter over cross slide: 350mm -CENTER DISTANCE: 5000 mm -Spindle bore: 100mm -Bed width: 550mm -Spindle nose: C11 -Spindle speeds: 7.5 - 1000 RPM -Number of speed steps: 18 -Automatic longitudinal / crossfeed -Rapid traverse in bed slide / longitudinal & crossfeed -Thread cutting / Metric / Inch / Module etc. -Main drive: 11 KW -Tailstock quill diameter: 100mm -Tailstock quill stroke: 250mm Dodpfxo Ah E I Ho Acyekw -Coolant system -3-jaw chuck: 300mm -2 x Steady rests -Chuck guard Dimensions: L x W x H: 7.4 x 1.4 x 1.6 meters / Weight: 6700 KG Errors and omissions excepted.

Year of construction: 2014, condition: repair required (used), functionality: limited functionality, • Production freeze dryer, Parker Freeze Dry 5-945-135, custom model, made to order for client’s specification; CE-marked, 400V 50Hz three-phase power. Nominal condensercapacity 453kg of ice. • Dual phase vacuum pump cluster, Busch, RA0255 main pump (max. 25A 400V) + WV1500 booster pump (max. 20A 400V), serviced 2023, overhauled 2021. • Heat control system, programmable, West ProVU + 4 x 6100+ • Five product carts, 27 heated shelves and approx.100kg capacity each (max. 50A 400V). • 2 Full tray sets (2x135 pieces), 18x26 inch, aluminum. • Outdoor cooling unit, cooling + hot gas de-icing, compressor rebuilt and overhauled 2022/2025. Dsdpfx Acez Dz Rteyokw Max power consumption 50A 400V. cooling face measurements 4.6mx2.4mx1.3m measurements of the carts 20cmx120cmx70cm

Condition: used, Year of construction: 2002, overall weight: 8,000 kg, total length: 6,700 mm, total width: 2,400 mm, total height: 1,900 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Based on the following description, here is the machine description in Hungarian: We offer a used Schwarze-Robitec CNC 80/60 E TB MR tube bending machine, manufactured in 2002. Serial number: 2002-0410 Type: CNC 80/60 E TB MR Year of manufacture: 2002 Tool sets: 40x 2R 60, 90, 120, 150. 38x 2 R 107.5 Dkjds Aarryjpfx Acysw If you have any questions or require further information, please send us a message or call us.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, operating hours: 100 h, input voltage: 415 V, input frequency: 50 Hz, pressing force: 120 t, stroke length: 500 mm, table width: 1,300 mm, table length: 2,500 mm, throat depth: 1,000 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 1,000 mm, total length: 3,000 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 2,900 kg, Equipment: CE marking, SCM Sergiani PF Cold Platen Press, New 2021, Model PFH DIGIT 25/13 Platen area 2500 x 1300 mm, with 6 x 90 mm dia chromed hydraulic cylinders giving 120 tons pressure via a double rack and pinion Dsdpfx Aj Ad Hatecyskw system connected by a torsion bar to grant a planar movement of the movable press platen. Controlled by Siemens colour touch screen control panel. Suitable for pressing plasics, composites, wood inc door panels etc and some light sheet metalwork.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Sheet metal width: 2050 mm Sheet metal thickness: 4 mm Stroke: 41 mm/min Table height: 850 mm Machine weight (approx.): 2,900 kg Dimensions: 2700 x 2200 x 1400 mm Djdpfxozbarns Acyjkw

Condition: good (used), electric motor, drive motor, engine -Manufacturer: Einhell, electric motor from column drill TB 13/5 EK -Power: 0.25 kW / 1420 rpm Dkodpfx Acsw S Tg Teyjw -Shaft: Ø 14 x 30 mm -Number: 6x motor available -Price: per piece -Dimensions: 185/123/165 mm -Weight: 4.6 kg/piece

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Dksdpfxsz Iqdqo Acysw Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Waste conveyor belt Automatic lubrication system Remote console 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 bars and 24 cups with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for panel lift Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. BiesseWorks Advanced Machine Chain tool magazine with 33 places - centre distance 120 mm (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Dedpfjy U Naiox Acyokw Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Year of construction: 2022, condition: excellent (used), 2022 Versafire EP 135 High End Professional Print Production Line Including: Versafire EP 135 A4/min Or 4,500 A3 Sheets/Hour (Simplex) Engine Unit, Media Identification Unit, Fuser Unit, Automatic Colour Diagnosis & Image Quality Monitor Unit, EFI Fiery Colour Controller E-86, EFI Impose (Streamlines & Automates The Imposition Process) & Fiery ES-3000 Spectrophotometer. Versafire Engine S/No. 5022F130003 (2025). LCIT RT5120 A3 Vacuum Feeder (A3 Large Capacity Tray With Vacuum Feeder, 2 Trays, Capacity Up To 4,400 Sheets (80 g/m2)). BY5020 Multi Bypass Unit (Additional Feeder (No Vacuum Support) For Up To 500 Sheets, Maximum 216 g/m2 Uncoated; e.g. For Banner, Special Stock, Envelopes, Overhead Transparencies, Labels, Letterhead & Postcards). LCIT Vacuum Feed Banner Sheet Tray (Vacuum Supported Banner Pile Feeder Option, Max. Capacity 730 Sheets (Top Tray Front Loading Will Be Disabled), Media Format 489-700mm Up To 300 g/m2). LCIT RT5120 Multi Bypass Attachment Kit For Vacuum Feeder (Must Be Installed When Attaching Multi Bypass Unit To Vacuum Feeder). Multi Bypass Banner Sheet Tray (Mechanical Support For Long Sheets (Banner). Roll-Away Cart Type 5010/5040 (Additional Roll-Away Cart For The High Capacity Stacker). SK5040 High Capacity Stacker (Receives & Holds Up To 5,000 Sheets, One Roll-Away Cart 5010 Comes Standard For Easy Removing Of Large Stacks Of Printed Material). Output Tray For Banner Sheet Type (Mechanical Support For Long Sheets (Banner). SR511 0 Standard Finisher (Up To 3,000 Sheets Capacity (80 gsm), Stapling Up To 100 Sheet With Automatic Shortening Of Staples). NOTE: A loading fee will be added to buyer's invoice of £200 + VAT. Dsdpo Ad D Afsfx Acyokw With TCRU/ORU (Sets A & B) Spare Parts To Increase Uptime; Includes Charging Unit, Drum Cleaning Unit, Image Transfer Belt Cleaning & Lubrication Unit, Infeed-, Transfer & Paper-Separation-Rollers, (4) Photoconductor Drum, Fuser Belt Smoothing Roller Unit, Dust Filter, Fuser Cleaning Unit, Fusing Unit And Fusing Refresh Roller Unit, Versafire EP Toner (Black), Versafire EP Toner (Yellow), Versafire EP Toner (Magenta), Versafire EP Toner (Cyan), (3) Waste Toner Bottles, Empty Toner Bottle Collection Box, Matt Fuser Assembly Unit, Dell Optical USB Mouse, Dell Qwerty USB Keyboard, Cables, Versafire EP Branding Kit & Operating Instruction Manuals. Please note: Printer is now in storage and not under power. NOTE: A loading fee will be added to buyer's invoice of £200 + VAT.

Condition: ready for operation (used), Year of construction: 2013, Suitable for thin materials, wood and painted surfaces. Working width: 1650mm, feed rate: 5-25m/min, sanding belt dimensions: 1650mm/2620mm, connected load: 33kW, length: 1800mm, width: 2200mm, height: 2500mm, weight: 4.5t, operating hours: approx. 200h. The machine is technically fully functional. On-site inspection is possible. Dsdpfouqac Dex Acyskw

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,269 h, load capacity: 1,250 kg, lifting height: 3,975 mm, free lift: 1,900 mm, load center: 500 mm, fuel type: electric, mast type: free lift with telescopic boom, construction height: 2,450 mm, motor manufacturer: STILL, gearing type: automatic, battery manufacturer: MIDAC, battery model: 24V 875 AH, battery capacity: 875 Ah, remaining battery capacity: 64 %, battery voltage: 24 V, DGUV certified until: 03/2027, fork length: 1,200 mm, tire condition: 100 %, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), color: orange, Equipment: CE marking, UVV, head guard, lighting, sideshift, Fully operational STILL electric forklift, 1250 kg load capacity Completely overhauled according to manufacturer's specifications Duplex full free lift mast, 3975 mm lift height, 2450 mm overall height Battery and matching charger included Machine location: 90518 Altdorf near Nuremberg Djdoyr Dkpepfx Acyjkw Price: €9,900 + VAT Available for nationwide rental Transport can be arranged

Year of construction: 2006, condition: ready for operation (used), 2 x Müller Martini Warenkkeber 423 with Robatech Hotmelt Concept B 5/2, year of manufacture 2006 for Müller Martini Tempo saddle stitcher. Good condition Dedpfx Acexfwvqoyokw

Condition: used, TECHNICAL DETAILS - spindle speed : 400 - 4.500 [Rpm] - drilling capacity in steel / cast iron : 10 / 13 [mm] - drilling depth : 60 [mm] - column / spindle distance : 185 [mm] - useful table volume : 220 x 300 [mm] - motor power : 0.5 [kW] Dkedpfsuhabtex Acyjw - supply : 220 [V] - speed selection through display of drilling diameter and material - electronic adjustment of the spindle speed - continuous adjustment of the spindle speed between 400 and 4500 Rpm - steady loading speed - drilling head with adjustable height through pneumatic compensator - fine adjustment of the drilling depth through millimetric vernier - electronic protection motor - base plate entirely machined (220 x 300 mm)

Condition: reconditioned (used), Year of construction: 2017, machine/vehicle number: SN48357, functionality: fully functional, Chamber furnace with exhaust hood, fully refurbished, 12-month warranty, available for immediate delivery - Max. temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch Djdpfx Aetbq Eqjcyjkw - 5-sided heating - Supply and exhaust air with electrically actuated dampers (driven by Belimo actuators) - Supply air fan with frequency converter, controlled via regulator - Stainless steel exhaust hood - Bentrup 507 control system with thyristor control - Note: Controller language is German only; switching to other languages is not possible! - Additional drag element Type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current rating: 26 amperes - Supply voltage: 3/N/PE 400VAC - Connection type: prepared for fixed connection, 32 A plug - Documentation, CE declaration - Electrically tested and supplied with current DGUV test protocol Inspection by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, curing furnace, tempering furnace, laboratory furnace, hardening furnace, ceramic furnace

Condition: used, Year of construction: 2019, Highly flexible vertical machining center for milling, drilling and cutting. The BREMA patent for processing vertically, allows this series of machines to be the most flexible and productive machine par excellence to a very high quality level. Furthermore, the automatic return / rotation system of the panel makes it fully automated. Possibility of working in height up to 1300 mm, working on all 6 sides of the panel. Working dimensions: * length 300 - 2500 mm * height 60 - 1300 mm * thickness 10 - 80 mm * max weight 50 kg Machine programming and control system with PC - TPA Albatros software. Programming editor with a high-level software interface allows you to program the machine easily and intuitively and also allows: * linear, circular and helical interpolation * double zero reading * mirror program management * optimizer for revolver tool diameter * optimizer for independent spindle diameter * DXF file conversion (geometric conversion) * import of work lists in ASCII format * extra key for programming from the office * gun barcode reader * 17” LCD monitor * Windows 7 professional operating system Panel introduction and handling by means of motorized vertical transfer with rollers and rubber-coated pressers for sealing of the panel during the workings, with a motorized carpet length of 2000 mm, with speed regulation electronically adjustable with converter. The photocells and the NC program guarantee the introduction of one or more panels in sequence using selector. Panel height reading system consisting of an independent axis able to read the panel height before getting into the car. Size reading tolerance +\- 0.15 mm. In case the tolerance is exceeded a message will inform the operator and the machine will stop the operation in progress. Panel thickness reading system using a mechanical feeler Horizontal vice - M.O. axis which allows the thickness of the workpiece to be established from the program. Vertical vice - M.V. axis which allows the program to establish the height dimension of the piece being processed. Chain - X axis - patent double section with laser photocells able to read the reference zero of the panel before carrying out the work. The double section allows you to carry out machining on the lower side of the panel thus having the possibility of work the panel on 6 sides. Brushless motors with programmable speed regulation by NC. Drilling unit with independent spindles 7 + 17 x 32 mm 24 independent spindles with 32 mm pitch arranged as follows: * 7 spindles aligned in X axis * 17 spindles aligned in Y axis Unit driven by a high-frequency motor that allows the rotation change of the spindles up to 7000 RPM The Brushless motor allows drilling depth control and forward speed control. Upper revolver milling group with 10 positions and tool change controlled by NC. 11 KW motor with direct transmission of movement to the tool up to 18000 RPM. The rotation of the revolver generated by controlled axis with Brushless motor allows quick tool change. Djdpfx Asl Ikzgjcyokw 10 aggregate heads included in the revolver Automatic lubrication 180° panel translation and rotation system Movement and rotation system of the panel arriving from the machine which allows unloading or rotation of the panel and the return to the machine for machining on both surf

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 5,500 h, Takeuchi TB 235 Year: 2008 Dkjdpfoy Hxquex Acysw Approx. 5500 operating hours Martin Powertilt Hydraulic quick coupler 3 buckets Immediately ready for use Not the best visually Delivery possible

Condition: used, Year of construction: 2008, number of axes: 3, working width: 1,300 mm, working length: 3,200 mm, TECHNICAL DETAILS Working area, X-axis: 3,200 mm Working area, Y-axis: 1,300 mm Number of controlled axes: 3 Total number of drilling spindles: 36 Tool change stations: 10 MACHINE DETAILS Power of main electric spindle: 11 kW Djdpfxez Ekchs Acyjkw EQUIPMENT Type of machining: Drilling and milling The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7468

Year of construction: 2011, condition: excellent (used), I sell the Stacking / Destacking device MEINERT (IMA Group) P620 E/S - 2500 / 1300 System, year 2011. Stacking device one side feeding / also suitable for pallets. Vacuum-System (including pump) Rotating head Automatic loading. Infeed table motorised roller-system Outfeed table with lifting mechanism motorised roller-system Outfeed table front roller-system Outfeed feeding station for stacked material Security fence system fully complete ! Djdpfx Aceh Hp Dtsyjkw Working capacity apprx 16 tacts / min Material thickness 10 - 50mm Min. Material size 250 x 320 mm Max. Material size 1300 x 3000 mm Total area covered L.10.200mm x W.8700mm Total power 45kW Year 2011. Available immediately. Ready for work, possible to test. With CE Certificate and full manuals.

Condition: good (used), functionality: fully functional, power: 22 kW (29.91 HP), empty load weight: 3,605 kg, Year of construction: 2014, operating hours: 5,000 h, Equipment: rubber tracks, Mini excavator TAKEUCHI TB235 Year of manufacture: 2014 According to the hour meter: 5,000 hours 3,605 kg 22 kW - POWERTILT - Hydraulic quick coupler - All hoses - 3 buckets (including 1 bucket + slope bucket in new condition) - Cabin with heating - Lighting system - Ready for immediate use! Dsdez Du E Rspfx Acyokw Selling price: €24,900 net Affordable delivery also possible!

Condition: ready for operation (used), Year of construction: 2011, number of axes: 7, pressing force: 133 t, This 7-axis TRUMPF TruBend 5130 was manufactured in 2011. It has a capacity of 3100 mm and 130 tons, featuring a Wila hydraulic upper and lower clamping system and a bending aid. The machine is equipped with CNC-controlled back gauge for X, R, Z1, and Z2 axes. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 5130 press brake we have for sale. Contact us for further details. Dkedpfx Aco Aifl Ioysw • Capacity: 3100 x 130 tons • CNC-controlled back gauge: X, R, Z1, Z2 Additional equipment • Wila hydraulic upper and lower clamping system • Bending aid Technical Specification Bending Length 3230 mm

Condition: like new (used), functionality: fully functional, SCM SERGIANE STV 12-13-250 edge banding press Maximum pressing length: 12,000 mm Maximum pressing width: 250 mm Maximum pressing height: 1,300 mm Number of vertical clamps: 56 Number of front clamps: 12 Dkedpezlhnwofx Acyjw Pressing force: 5–15 kg/cm² CE certified DTR documentation included Overall length: 16 m Year of manufacture: 2019

Condition: good (used), 1 x Bench drill with threading attachment. Solid TB 13 in good technical condition. Technical data: Chuck: BT 16 Speeds: 200 - 3200 rpm Table clamping surface: 260 x 330 mm Accessories: 1 x Röhm drill chuck 1 - 13 mm with key 1 x Threading chuck Dkodpfx Acowyw Apjysw The machine can be inspected while powered on.

Condition: excellent (used), Year of construction: 1997, operating hours: 48,889 h, functionality: fully functional, center width: 1,000 mm, center height: 280 mm, spindle speed (max.): 2,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dodpfxj Afxxbe Acyekw Maximum height: 280 mm Distance between centers: 1000 mm Swinging diameter: 500 mm Diameter of rotation over bed: 570 mm Diameter of rotation over support: 340 mm Spindle speed max.: 2500 RPM MACHINE DETAILS Operating hours: 48,889 h EQUIPMENT Chuck

Condition: excellent (used), Year of construction: 2009, operating hours: 44,561 h, functionality: fully functional, machine/vehicle number: 173072, clamping force: 3,000 kN, screw diameter: 55 mm, Equipment: documentation/manual, Here, as a dealer of injection molding machines, we offer the following well-maintained used injection molding machine: Of course, we also purchase well-maintained injection molding machines from model year 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Engel Type: VC 1350/300 spex plus Viper 12 Robot Serial number: 173072 Year of manufacture: 2009 Operating hours: 44,561 h Control system: CC200 Fully functional Condition: very well maintained Machine comes from a German first owner Extras: - Handling system Viper12 (z-axis 2240 mm, x-axis 600 mm, y-axis 1200 mm) - Core puller: 1x - Mounting plate, vertically enlarged - Mounting plate, standard centering 160 mm - Approved for use up to 350°C - Nozzle control, 1-fold hydraulic - Injection unit, swiveling - Screw S8, highly hardened, wear-resistant / for thermoplastics - Screw length L/D20 - Hydraulic system HV1 for sequential motion sequence - Interface for color dosing - 4 sockets 10A/16A, mold closing side - Interface for ejector locking - Interface for potential-free contacts - Freely programmable, 4x digital output Injection unit: Screw diameter: 55 mm Injection weight: 570 g/shot Injection pressure: 1763 bar / increased to 2183 bar Injection volume: 618 cc Dedpfsz Ng Rwex Acyekw Clamping unit: Clamping force: 300 tons / 3000 kN Tie bar distance: tie-barless Mounting plates: 1100 x 700 mm (h x v) Tool opening stroke: 900 mm Tool installation height: 400 mm Max. distance between platens: 1300 mm Ejector force: 90 kN Clamping unit: hydraulic Weight: 19,400 kg Dimensions: 7.06 x 2.13 x 2.45 m ✅ Available immediately from our warehouse in Hanover/Germany or delivered to your location against reimbursement of freight costs. Worldwide delivery possible. The machine is in our sole ownership. ✅ The requested machine is now available in our warehouse in Hanover and is offered after functional testing and can be inspected while powered. For information about the machines we offer and our company: - We only sell machines that we have purchased ourselves from current production and that are stored in our Hanover warehouse. - All offered machines are checked and tested before dismantling. - We do NOT sell insolvency goods. - We are NOT an intermediary that trades with third-party property. - All offered machines come from successful companies for which maintenance and care are a matter of course. - All offered machines can be inspected in our warehouse.