Used Hydraulic Test Bench for sale (27,418)

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Stand – Fully Functional Bedpfezimb Dex Ac Todg Description: For sale is a Sincotec Power Flow servo-hydraulic test stand from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g., in the automotive, mechanical engineering, or research sectors. Technical Highlights: - Max. test force: 100 kN (up to ±150 kN) - Max. torque: ±2000 Nm (up to ±4000 Nm) - Linear stroke: ±50 mm (max. ±75 mm) - Max. rotation angle: ±50° - Servo-hydraulic control - Control via Sincotec TestPilot / CoPilot software - Includes large hydraulic power unit Dimensions & Test Stand: - Test table: approx. 1.20 × 1.00 × 1.20 m (H) - Total stand height: approx. 3.30 m Hydraulic Power Unit (separate): - Height: 2085 mm - Length: 2714 mm - Width: 1820 mm Fully functional before dismantling Power Supply / Electrical (from nameplates): - Single units / Motors - 230 V / 50 Hz - Drain oil pump: 0.18 kW / 1.5 A - 400 V / 50 Hz (three-phase current) - Traverse: 0.25 kW / 0.79 A - Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Delivery includes: (see photos) (Specifications and details subject to change or error!) For further questions, feel free to contact us by phone.

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Bdsdpfozimcbex Ac Tog Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: 7001922, input voltage: 400 V, Equipped with 4 M-20iD/12L Fanuc robots. Bdedpfsy T Ulzjx Ac Tjg Installation dimensions: 16,000 x 4,000 x 3,400 mm.

Condition: used, Year of construction: 2013, functionality: fully functional, total width: 1,000 mm, total length: 2,500 mm, total height: 1,020 mm, Optical table Perforated plate made of stainless steel (11 cm) Frame: 80x82x155 cm (H x W x L) Bedpfx Aezrfl Hjc Todg

Condition: excellent (used), functionality: fully functional, Granite measuring table Bodpjxwp Icofx Ac Tjdg without height measuring device! Condition: very good (like new) With low-vibration base, ideal for precise measuring tasks in production and quality assurance. Dimensions: L/W/H 660 mm x 660 mm x 800 mm; thickness of the granite plate 160 mm.

Condition: good (used), Material test stand / final inspection  consisting of the following main components   Keyence XG-H500M Digital 5 million pixel B/W camera  Keyence XG-7701P Multi-camera image processing system/controller Keyence CA-DC21E Illumination Controller   Opto Engineering TC23096 Bi-telecentric lens  Keyence XG-H500M Digital 5 million pixel B/W camera  CCD: 2/3-inch monochrome CCD, squareElement all pixels 11x reading speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), interlace (40.3 ms)Interlace is a binning process that sums the odd lines and even lines. Model CA-DC21E Illumination Controller   Type Illumination Controller For XG/CV-5000/CV-X200/CV-X100 Series only Input: Forced lighting cut-off: Input voltage max. 26.4 V, min. 2 mA Output Light control method (1) Constant voltage control method (DC lighting) (2) Pulse-width modulation method (emission frequency: 100 kHz) [Change of control unit setting]. Brightness levels 255 levels digital [change of control unit setting] Number of connections Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC/24 VDC [setting via DIP switches] Power Max. 40 W (30 W per channel) Synchronisation Synchronisation via FLASH output/continuous illumination [change of control unit setting] Response time (1) Constant voltage regulation: Max. 10 ms for 12 V output, Max. 20 ms for 24 V output (2) Pulse width modulation method: Max. 1 ms with 12-/24-V output. Display LED display Supply voltage 24 VDC ±10 % Current consumption 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence xg-7701p Multi-Camera Image Processing System/Controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093 x, C-mount Magnification (×) 0.093 Image circle Ø (mm) 11.0 Max detector size 2/3" Working distance (1) (mm) 278.6 wF/# (2) 8 Typical telecentricity (max) (3) (deg) < 0.06 (0.08) Typical distortion (max) (4) (%) < 0.04 (0.08) Depth of field (5) (mm) 77 CTF 70 lp/mm (%) > 40 Image area of the object (6)     with 1/3″ detector (4.8 x 3.6 mm) (mm × mm) 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm) 61.29 x 46.02 with 1/2″ detector (6.4 x 4.8 mm) (mm × mm) 68.82 x 51.61 with 1/1.8″ detector (7.13 x 5.33 mm) (mm × mm) 76.67 x 57.31 with 2/3″ - 5 MP detector (8.50 x 7.09 mm) (mm × mm) 91.40 x 76.24 Dimensions Mount C Phase adjustment (7)         Length (8) (mm) 336.6 Diameter (mm) 143 Weight (g) 2500 Complete factory closure, Bedpjg Sxmfefx Ac Tsdg large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), For sale is a solid, planed, and precision-ground metal layout and measuring table with a sturdy steel frame. The massive, machined work surface is ideally suited as a precise reference and work surface in mechanical engineering, toolmaking, mold making, quality assurance, as well as in locksmithing and metalworking. Due to its robust design, the table offers a very stable and durable work base. Features: Bdjdpfezwv Hxox Ac Teg * Solid metal plate * Planed / finely machined surface * Sturdy steel frame * Additional storage space in the frame * Very heavy and robust design * Lateral holes in the plate * Used, condition appropriate for its age Suitable for, among other things: * Layout work * Measuring and inspection work * Aligning and checking workpieces * Use with height gauges and dial indicators * Tool and fixture construction * Mechanical engineering and metalworking The surface shows signs of wear and tear due to age and use, but is overall in good used condition. Plate dimensions: Length: approx. 1000 mm Width: approx. 1000 mm Due to the massive and heavy design, only pickup is possible. An inspection is possible by appointment. The stated selling price is NET, plus 20% VAT. VAT can be shown separately. Subject to prior sale and errors.

Condition: good (used), Inspection table / Measuring table Manufacturer: STOLLE Tabletop dimensions: (mm) 3,000 x 3,000 x 350 Bdedpozwpucsfx Ac Teg Accuracy class 1 Tolerance 0.04 mm Plate weight approx. 6,100 kg Equipped with 13 legs for leveling.

Condition: used, Shaker Fixture Cube / Clamping Cube made of Aluminum Bdjdpfx Acozp E Dkj Tsg Manufacturer: Unknown Type: Shaker Fixture Cube / Fixture Block / Clamping Cube Material: Aluminum Machine Type: Clamping cube for vibration test benches / vibration testing External dimensions: approx. 240 × 240 × 240 mm For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube was developed for use on electrodynamic vibration test benches and serves for the secure fastening of test specimens, measuring setups, and special devices. Due to the precision-machined clamping surfaces and the numerous threaded holes on all sides, the fixture cube is ideally suited for testing laboratories, research institutions, mechanical engineering, the automotive industry, and aerospace technology. Technical data: Manufacturer: Unknown Material: Aluminum Design: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 mounting holes: Ø approx. 80 mm Central through hole Precision-machined clamping surfaces Threaded holes on all side surfaces Heavy-duty industrial design Dimensions: External dimensions (W × D × H): approx. 240 × 240 × 240 mm Material: Aluminum Features: Precision-machined clamping surfaces Threaded holes on all side surfaces Four large mounting holes Central through hole Heavy-duty aluminum construction High stiffness for dynamic loads Suitable for individual test setups Application areas: Vibration test benches Vibration testing Environmental testing Testing laboratories Research and development Mechanical engineering Automotive industry Aerospace technology Shipping data: Dimensions (W × D × H): approx. 240 × 240 × 240 mm Shipping via parcel service possible by arrangement. Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Scope of delivery: Shaker Fixture Cube made of aluminum Scope of delivery as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Year of construction: 2023, condition: excellent (used), machine/vehicle number: 0293, We are selling the test bench from the aircraft manufacturing sector. Bedpfxjyl S Eue Ac Todg

Condition: used, LDS V790-335T Vibration Test System with HPA-K CE Amplifier Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V790-335T with HPA-K CE Amplifier Machine Type: Electro-dynamic Vibration Test System / Shaker System Cooling: Air-cooled Vibrator For sale is an industrial vibration test system from the manufacturer LDS (Ling Dynamic Systems). The system was designed for professional vibration and shock testing and is suitable for research and development, quality assurance, environmental simulation, electronics testing, as well as industrial stress and endurance tests. Technical Data Shaker Manufacturer: Ling Dynamic Systems Ltd. (LDS) Product: Air-Cooled Vibrator Model: V790-335T Armature diameter: 335 mm Frequency range: DC to 3,000 Hz Resonant frequency: approx. 2,250 Hz Max. continuous displacement: 50.8 mm pk-pk Max. velocity: 1.5 m/s Sine force peak: approx. 6.67 kN / 1,500 lbf Random force RMS: approx. 6.67 kN / 1,500 lbf Half-sine shock force peak: approx. 26.69 kN / 6,000 lbf Effective moving mass: approx. 13.08 kg Internal load capacity: approx. 160 kg Compressed air supply required: Load support: approx. 5.52 bar / 80 psi Optional air isolation: approx. 5.52 bar / 80 psi Power Amplifier Manufacturer: Ling Dynamic Systems Ltd. (LDS) Product: HPA-K Amplifier Model: HPA-K CE Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 V Current setting according to nameplate: 400 V Maximum connection power: 9.3 kVA Weight of amplifier: approx. 750 kg Equipment LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control and rack units PC workstation with monitor, keyboard, and mouse Cables and connection accessories as shown in the pictures Emergency stop units and safety accessories Existing documents and documentation Areas of Application Vibration testing Shock testing Environmental simulation Electronics testing Automotive industry Aerospace Research and development Quality assurance Industrial stress tests Scope of Delivery LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control and rack units as shown in the pictures PC workstation as shown in the pictures Cables and accessories as shown in the pictures Existing documents / manual Condition Used System from industrial use Optical condition as shown in the pictures Normal signs of wear and tear and storage Bdedpsy Uigcjfx Ac Tjg Inspection and testing on site are possible and expressly desired after prior arrangement. Due to the size and weight, professional dismantling, loading, and transport organization are recommended. Availability: by arrangement. Scope of delivery as shown in the pictures. Changes and errors in the technical data as well as prior sale are reserved.

Condition: good (used), Siga Type: GS-517-400 External dimensions L x W x H: 4960 x 2500 x 2400 mm. The complete system is calibrated according to DAKKS standards and is therefore approved for tests relevant to type approval. Butane loading rate - Continuously adjustable from 5 g/h to 77 g/h Fuel loading rate - Continuously adjustable from 5 g/h to 100 g/h Fuel temperature control - Continuously adjustable from 20°C to 50°C Gasoline quantity selectable - From 0 l to 8 l Selectable breakthrough criterion - From 1 g to 10 g Temperature of purge air flow - Continuously adjustable from 25°C to 30°C Precision scales for test specimen and reference AKF - Measuring range up to 6 kg, 0.1 g resolution Purge underpressure - Continuously adjustable from 0 hPa to 30 hPa Purge air flow - Continuously adjustable from 1 l/min to 60 l/min Humid purge air flow - Continuously adjustable from 10% RH to 85% RH Number of cycles from 1 to 999 (loading/purging) Condition: used Sale from our location! Bdjdpezg Ex Nefx Ac Teg Scope of supply: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), EDAG EDAG Huf Endurance Test Stand Intended use: This test stand is intended exclusively for testing components that are capable of rotational and/or translational movement within the scope of an endurance test and within the limits of the following technical specifications. Technical data: Dimensions: Width 1565 mm x Depth 615 mm x Height 1655 mm Weight approx. 450 kg Operating voltage 400V / 50Hz Control voltage 5, 24 Preliminary fuse 16 A Testing device: Maximum stroke 194 mm Maximum axial force 500 N Maximum torque 5 Nm Breakaway force (manually operated slider) 15 N Displacement force (manually operated slider) 10 N Other equipment: P4, 24" TFT monitor (1900 x 1080) Operating system: Windows XP Measurement and control software: LabVIEW 2011 PC plug-in cards: 1 card, NI PCI-6251, 1 card, N1 PCI-7044 Bjdpfx Acszh U Rde Todg Drawer: 500 mm (full extension with automatic closing) Additional load: 500 N Drawer cabinet, lockable: 3 drawers The teach-in endurance test stand is a device for carrying out endurance tests on test objects that can rotate and/or move translationally, e.g., cylinder locks, door handles, key functions. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), For sale is a professional measurement station, the Wentworth Laboratories MP-0900, designed for testing and performing measurements on semiconductor components, circuit boards, and microelectronics. Bdsdpfxszu Tnzo Ac Teg The device is equipped with a Wild Heerbrugg Epizoom 1:5 stereoscopic microscope with smooth magnification adjustment and a precise, movable measuring table. The design also features color-coded measurement ports. Data from the nameplate: Manufacturer: Wentworth Laboratories, Inc. Model: MP-0900 Serial number: 123A Power supply: 230 V Frequency: 50 Hz Weight: approximately 34.6 kg Wild Heerbrugg microscope – manufactured in Switzerland Used condition, with normal signs of wear visible in the photos.

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: CRi PC singelline, Well-functioning Common Rail diesel injector test bench. The machine is equipped with a new PC and recent software. It is supplied with a large selection of clamping blocks, test cables, return connections, and high-pressure pipes. Bedpfsxiyxvex Ac Tedg

Condition: like new (used), Carbon Zapp GDU.2R (45F) – 2021 – Excellent Condition For sale: a professional Carbon Zapp GDU.2R (45F) diagnostic unit designed for testing and diagnosing gasoline direct injection (GDI) injectors. The unit is from 2021 and is in virtually factory-new condition – it has only been used for 1.8 hours, making it almost like new. Technical specifications: * Manufacturer: Carbon Zapp * Model: GDU.2R (45F) * Year of manufacture: 2021 * Operating hours: only 1.8 hours * Maximum test pressure: 450 bar * Tests 1 injector at a time * Power supply: 100–240 V AC, 50/60 Hz * Required compressed air: 6.5–10 bar (dry and oil-free) Application: The unit enables professional diagnostics and performance checks of gasoline GDI injectors used in vehicles such as: Bsdpfx Acjzkkk Ej Tedg * Volkswagen / Audi / Škoda / SEAT (TSI, TFSI, FSI) * BMW * Mercedes-Benz * Ford EcoBoost * Opel SIDI * Hyundai / Kia GDI * Mazda Skyactiv-G * Toyota D-4 / D-4S * Honda Earth Dreams * Nissan DIG * Volvo Drive-E and many other manufacturers using injectors from Bosch, Denso, Delphi, Continental/VDO, and Hitachi. Key advantages: * Professional diagnostics of gasoline GDI injectors. * Precise measurement of injector parameters and performance. * Automatic test procedures. * Intuitive software. * High accuracy and repeatability of results. Condition of the unit: The unit is in excellent technical and visual condition. Thanks to only 1.8 hours of operation, it can be considered practically new. An ideal offer for a workshop or company specializing in the diagnostics and refurbishment of gasoline injection systems.

Year of construction: 2019, condition: ready for operation (used), A Niehues hydraulic testing system is available. 1) TP pump, motor power: 315kW, liter capacity: 13.94l-41.83l/min, max. operating pressure: 25bar, nominal delivery head: 28m. 2) NKG pump, motor power: 315kW, liter capacity: 5.61l-16.83l/min, max. operating pressure: 16bar, nominal delivery head: 80.7m. 3) Tank, volume: 11400l, permissible pressure: 0.5bar-10bar, operating pressure min./max.: 1bar-5.5bar, medium: drinking water without additives, temperature min./max.: -10°C-50°C, permissible load rating: 1000. Bdsdpfxst Daq Us Ac Tjg

Condition: excellent (used), Kübrich Kübrich Test Systems 48V Belt Starter Generator - Component Test Bench Details of the test bench: (See Figure 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for control, interface panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measuring technology box (9) H4: Interface box Intended use: The test bench is used for conducting tests on belt starter generators during development. Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (briefly, less than 1 s) Control voltage: 24 V Mechanical performance data according to the data sheet of the load machine Bsdpfx Aszhkb Sec Tedg Note that a gear ratio of 1:2 to the test specimen shaft must be observed. Rotational speeds: Load machine: Manual operation: 0 - 50 1/min Automatic operation: 0 - 10,000 1/min Test specimen motor: Manual operation: 0 - 100 1/min Automatic operation: 0 - 20,000 1/min Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Condition: used Scope of supply: (See Figure) (Changes and errors in the technical data and details are subject to change!) We will gladly answer any further questions you may have by telephone.

Year of construction: 1999, condition: good (used), The machine has been produced in the late 1990's. Very little usage (it has been stored in a warehouse). Located in Tata, Hungary. No warranty. 1800 bar Cr pump with injector Test bench with 15 kW power, 12 measuring points, flow-through water cooling KMA flow meter system with 2 flow meters. The bench has a separate lubricating oil pump with lubricating oil supply Speed range from 0 to 4000 f/min. Equipment: - Bosch Cr pump control test in safety, protective cage - Bosch magnet coil injector testing, coding - optional testing of piezo injectors - option to repair and test CP2 pumps Testing and coding is performed using Bosch factory software and database. Bosch Esi subscription required Bjdpfx Acstw S Awj Tsdg The test bench is in good condition and has been operated with regular calibration. For sale due to site closure.

Year of construction: 2011, condition: used, functionality: limited functionality, machine/vehicle number: 8802L1280, We offer this used Instron 2527-113 / 104999 servo-hydraulic dynamic testing machine, model 8802, manufactured in 2011. Bsdpjzgvrtofx Ac Todg Manufacturer: Instron Model: 2527-113 / 104999 Serial number: 8802L1280 Control type: Digital control electronics Force: 160 tons Working width: 1120 mm Stroke: 0 - 200 mm Stroke rate: 0 - 6000 1/min Table area: 800 x 560 mm Ram adjustment: 0 - 1100 mm Weight: 2.5 tons Space requirement (W x D x H): 1.1 x 1.2 x 3.6 m If you have any questions or require further information, please feel free to contact us.

Condition: used, 10 containers dedicated to hydrogen testing L 6058 x W 2438 x H 2896 mm Ready to be connected to cooling/electrical/H2-N2 systems Cooling capacity: 100 kW Electrical capacity: 40 kW (can be increased to 100 kW) Bench automation software provided (Horiba STARS) Durability testing Characterization testing EU declaration of conformity available Bodpfxjzgv Rve Ac Tedg

Condition: excellent (used), KSE Leakage Testing System Bsdpfx Acozdzile Todg Here we offer a KSE leakage testing system. Testing system for automotive applications Testing of electric drives Insulation/leakage testing of electric motors Supply voltage: 400 VAC Control voltage: 24 VDC Connected load: 0.75 kW Type: KSE I/SB-3 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2018, Nominal power in kilowatts 7,7 MW Bdsdsrr Ammspfx Ac Tog Maximum power 8,47 MW Nominal turning speed 1150 1/min Maximum turning speed 2200 1/min Nominal torque 63940 Nm Maximum torque 70330 Nm 8 MW test bench for gears, closed loop

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread Bjdjtrpiijpfx Ac Tjdg - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: not inspected (used), functionality: unexamined, NC-125 diesel injection pump test bench in used condition. This is a classic mechanical test stand designed for testing and calibrating diesel fuel injection pumps and injectors. Unit features a rotating pump mount, multiple high-pressure test lines, analog gauges, and manual control panel. Ideal for diesel repair shops, agricultural equipment service, or restoration projects. Machine shows signs of normal use (oil, wear, aging components) but appears complete. _____ Specifications (typical for this type) • Model: NC-125 • Type: Diesel injection pump test bench • Operation: Mechanical / analog • Applications: Inline injection pumps Rotary/distributor pumps • Includes: High-pressure lines Bjdpfx Aeyx Sihsc Tedg Gauge cluster Pump mounting platform _____ Condition • Used / untested • Cosmetic wear, oil residue • Sold as-is