Used Gear Tester for sale (7,370)

Condition: used, max. wheel diameter 0-200 mm max. module 25 min. module 0,5 Djdpfxetuxa Uo Acnjkr

Year of construction: 2019, condition: ready for operation (used), A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible. Dkedpsy Ax Thjfx Acnjr

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Djdpfx Ajzma Tbjcnekr Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: excellent (used), DAGE Series 4000 PXY – Bond Tester / Shear & Pull Tester for Connection Strength Testing Dedszma Skepfx Acnjkr

Condition: excellent (used), Electrical installation tester from the renowned German manufacturer Gossen Metrawatt The PROFITEST MXTRA model is designed for professional measurement of electrical installations and safety inspections. The device is used by electricians, service technicians, and for routine installation inspections. ⸻ TECHNICAL SPECIFICATIONS Dsdpfx Aoywcr Docnokr Manufacturer: Gossen Metrawatt Model: PROFITEST MXTRA Supply voltage: 230 V Measurement category: CAT III 600V, CAT IV 300V Professional electrical installation tester ⸻ INCLUDED IN THE SET PROFITEST MXTRA tester measurement cable adapter carrying bag The exact set is shown in the photos ⸻ APPLICATIONS electrical installation measurement safety testing installation inspections electrical service ⸻ CONDITION used visually in good condition

Condition: excellent (used), Electrical safety tester from the renowned German manufacturer Gossen Metrawatt The SECUTEST Pro model is designed for testing electrical devices in accordance with the IEC 62353 standard. The set includes several devices along with measuring leads and carrying bags. TECHNICAL DETAILS Manufacturer: Gossen Metrawatt Model: SECUTEST Pro Standard: IEC 62353 Power supply: 230 V Professional tester for electrical device safety SET INCLUDES Djdpjywcrwefx Acnekr Several testers Measuring cables Adapters Carrying bags Exact condition as shown in the photos APPLICATIONS Testing of electrical devices Service and maintenance Safety inspections Medical and industrial use CONDITION Used Visually in good condition Technical condition not fully checked IMPORTANT Sale as a set as shown in the photos No additional accessories except those pictured SHIPPING

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 48,651 h, Mazak Space Gear-510 MKII 2.5 kW Dkodpfx Ajwqr Tdocnsr Year of manufacture December 2002 - after renovation!!! Very good condition! Meter reading 48651 hours Operating system Fanuc L-64

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 41,417 h, Mazak Hyper Gear 510 4.0 kW Year of production February 2007 Meter reading 41417 hours MAZATROL operating system very good condition Technical data of the MAZAK HYPER GEAR 510 laser cutter - laser power: 4 kW - feeds in the X/Y/Z axes: 3070/1545/100 mm - dimensions of the work table (length x width): 3000 x 1500 mm - maximum weight of the workpiece: 930 kg - maximum dimensions of the workpiece (length x width x height): 3050 x 1525 x 25 mm - laser type: CO2 Dsdjwqr Twspfx Acnjkr

Condition: ready for operation (used), Year of construction: 1959, functionality: fully functional, machine/vehicle number: 80, total height: 1,900 mm, overall weight: 2,500 kg, total width: 2,200 mm, total length: 1,500 mm, power: 5 kW (6.80 HP), TECHNICAL DETAILS Power: 5 kW MACHINE DETAILS Drive system: Conventional Dimensions & Weight Dimensions (L x W x H): 1,500 x 2,200 x 1,900 mm Unladen weight: 2,500 kg Number of transport packages: 3 EQUIPMENT Documentation New Dathan knife sets Tools Measuring accessories Dkedpfx Acjzrmvtonsr

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Fully reconditioned milling head from a Gleason Pfauter P210L – manufactured in 2004. Dodpezr Hd Rsfx Acnekr

Condition: good (used), Geared motor, electric motor, electric geared motor, spur geared motor Dkedpoy Tka Iofx Acnjr Manufacturer: Nord, geared motor -Gearbox: Type SK12-71 L/4 i= 31.19 -Speed: 45 rpm -Engine: Nord type SK 71 L/4 -Power: 0.37 kW -Protection class: IP54 -Shaft: Ø 25 x 50 mm -Dimensions: 455/190/H170 mm -Weight: 16.4 kg

Condition: good (used), Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 59 rpm -Power: 0.18 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 55 Dedpfxjb R Ubce Acnskr -Number: 1x motors available -Price: per piece -Dimensions: 330/160/H160 mm -Weight: 10 kg

Condition: good (used), Year of construction: 2020, Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, spur gear motor -Type: RF47 DRN80M4/DI/KD1/TF/E18Z i 47.75 Dsdoxl Sbnopfx Acnokr -Speed: 30 rpm -Power: 0.75 kW -Shaft: Ø 30 x 60 mm -Protection rating: IP54 -Number: 4x geared motors available -Price: per piece -Dimensions: 510/230/H200 mm -Weight: 28 kg/pc.

Condition: good (used), Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Manufacturer: SEW Eurodrive, variable speed geared motor Dedpfszrfbzsx Acnokr -Type: R40 D16 DT71D4 -Motor power: 0.37 kW -Adjustable speed range: 8.5-42 rpm -Drive shaft: Ø25 x 50 mm -Design: B3 -Protection rating: IP54 -Dimensions: 595/160/H290 mm -Weight: 28.4 kg

Condition: good (used), Year of construction: 1998, Max. Pitch circle diameter External gearing 300 mm Max. Pitch circle diameter internal gearing 300 mm Max. Outer diameter of workpiece (equipment) 450 mm max. module 6 gear hobbing width -max. 100 mm Max. Helix angle (with tool Ø 125 mm) +/- 45 ° strokes - infinitely variable 130 - 1300 Hub/min workpiece weight 1000 kg Minimum distance table top - tool spindle -55 / +300 mm Maximum distance table top - tool spindle 200 mm Maximum distance table top - tool spindle 350 mm Manual Upright side shift +/- 25 mm Manual swivelling angle of the tool spindle +/- 0,5 ° Max. Tool speed 15 UpM Max. Workpiece speed 27 UpM Max. Tool diameter 7 Zoll voltage 400 V frequency 50 Hz Max. Line power 70 A total power requirement 48 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,27 x 3,11 x 2,87 m taper in main spindle SK 45 table hole 40 mm control Siemens Sinumerik 840 C Gleason PFAUTER gear shaping machine Mod. PSA 300 Djdpfevu E Nujx Acnekr The CNC modular gear shaping machine with skiving cutter for the machining of external and internal cylindrical gears, with straight or helical involute with straight or helical involute toothing, as well as any other profile splitting process. The work cycle is controlled by a CNC unit, with specific software for machining the gears, machining. Field of application --> The PSA 300 has been designed for the production of: - Gears with straight external teeth - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth

Condition: excellent (used), max. wheel diameter 50 mm Dkedsztf A Ijpfx Acnsr gear width 0 - 80 mm max. module 1 min. module 0,1 turning speeds 660 - 5300 U/min min. number of teeth 6 - 200 clamping length max. 80 mm total power requirement 1,2 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 0,8 x 0,8 x 1,4 m Highest precision for gear cutting, specifically for the watchmaking industry, instrument manufacturing, and mechanical engineering. With W 20 loader.

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor, crane motor -Manufacturer: ABM Greiffenberger -Engine: Type 3G225F/132 / D 80 b-4 -Power: 0.75 kW -Speed: 4 rpm -Design: B5 -Shaft: Ø 65 x 105 mm Dedpfexamghex Acnskr -Protection class: IP 54/55 -Dimensions: 705/305/H400 mm -Weight: 106 kg

Condition: ready for operation (used), functionality: fully functional, One used CNC gear grinding machine OERLIKON Opal 800 Max. tip diameter: 1000 mm Min. root diameter: 40 mm Min. module: 1 Max. module: 16 Number of teeth: 999 Max. gear width: 630 mm Opal grinding wheel and diamond disk Only single profile grinding possible, see photo. Djdpfxoyucd He Acnekr

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, CNC Spiral Bevel Gear Cutting Machine Gleason No 631 Year of manufacture: 2011 Dkjdpfx Acjw Tfb Sjnor Control: SIEMENS 840d Retrofitted in 2011/2012 with new control, drives, etc. The machine was fully overhauled in 2011. A new control system and drives were installed.

Condition: ready for operation (used), Max. Gear Diameter: Approx. 100 – 110 mm Max. Rack Length: 1460 mm Max. Stroke Length: 55 mm Max. Module: 5 Stroke Rate: Clamping Table Size: 160 x 1550 mm Spindle Diameter: Approx. 70 mm (Tool bore diameter ø44.45 mm) Dkedpfx Acoy R Sxtonjr

Condition: ready for operation (used), Used bevel gear lapping machine Manufacturer: Oerlikon Model: SL 2 Dksdpfx Asycc Rijcner The machine is available for immediate collection.

Condition: ready for operation (used), thread length: 3,000 mm, Maximum spindle bore is Ø 80 mm. The possible diameter from the traverse path is max. Ø 250 mm and min. Ø 20 mm. Machining length: 3000 mm. Comes with accessories: change gears, steady rest. For further technical data, please refer to the PDF file. Dksdpfov Huihex Acnsr

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Grinding worm dimensions: Dedpfx Aeyfnlkecnskr Min./Max. outer diameter: 280/350 mm Width: 84/104 mm Max. pitch with limitations: MOD 8.0 (DP 3.2) Number of threads: up to 3 with limitations Max. usable width (shift distance): 90 mm For detailed technical information, please refer to the attached PDF file. Accessories: Several Fässler diamond wheels Dressing device Grinding stones Turbo separator

Condition: used, Scale: 22 mm Technical data: - Mounting shaft: 5 mm Dodpfx Acezrxwcsnekr

Condition: used, As-new T-angle gearbox or bevel gearbox, Tandler Type O1-III, made of steel, with a gear ratio of 2:1 Technical data: - Manufacturer’s number: 151227 - Width: 222 mm - Height: 190 mm Dedpfezrxvrjx Acnekr - Depth: 110 mm - Ratio: 2:1 - Teeth: 22 x 6