Used Concentricity Test Instrument for sale (12,080)

Year of construction: 2019, condition: used, Manufacturer : ACS Instrument Model: 7400S Year : 2019 Type : Leak test bench / automatic and autonomous leak detector Application: Integrity test for flexible containers (flexible packaging, pouches, envelopes, etc.) Kodjx R Dfxopfx Ag Ujdg EM delta P: +- 5000 Pa Pressure test: -55 hPa to 950 hPa Motor power : 0,75 kW The cup is placed in a sealed enclosure. A vacuum is applied in the enclosure, causing the cup to inflate. The inflated cup is clamped between the two horizontal walls of the enclosure and exerts a force on the internal pressure sensor. The force exerted on this sensor is the image of the internal pressure of the cup. The leak test consists of measuring a variation in the force on the internal pressure sensor between the start and end of the stage. A touch screen for controlling and setting the instrument parameters. A USB key for exporting results. Documentation available

Condition: used, Instrument Systems Instrument Systems LED Testing Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices are from a laboratory environment, manufactured in 2007–2008, featuring high-quality industrial measurement technology. Scope of delivery / Included components - CAS 140C-152 spectrometer (2008) - Integrating sphere ISP250-110 & ISP250-211 (2008) - LEDGON 100 goniophotometer (2007) - CSD315 3-axis controller + emergency stop control panel (2007) - Keithley 2611 SMU / SourceMeter - PC system including software: - SpecWin Pro Kdsdpfx Aox Da Awsg Usg - SpecWin Light - Goniometer module - Original license CDs - User manual "LED test sockets" - Cables & accessories as per photos Technical features - Measurement of total luminous flux (lumens) - Spectral analysis (color temperature, CRI, chromaticity coordinates xy, spectrum) - Goniophotometric angular measurement - Analysis of radiation characteristics - Electrical control and IV measurements with Keithley 2611 - Fully automated test procedures with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Total dimensions/weight: approx. 40–45 kg Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: excellent (used), functionality: fully functional, Universal testing machine for material testing / material inspection Testing of tensile strength, bond tensile strength, and shear strength of masonry & wood joints, and similar applications. - Nail pull-out test - Compression test on cement and mortar prisms - Flexural test on cement and mortar samples - Compaction test - Flexural test on wood, concrete - Shear strength test on wood - Splitting tensile strength test on wood Kodpfx Asxmv H Rjg Uodg - Scaffold connection test - Shear strength test on masonry - Tensile test on masonry - Tensile test on reinforcing steel - Tensile test on wood - Pull-out test on reinforcing steel - Reverse bending test on reinforcing steel - Dowel pull-out test - Adhesion tensile test I have made a video demonstrating the machine's operation. I can send this video to a mobile number via WhatsApp or Signal!

Condition: used, Concrete sample press for concrete and material testing Flexural strength test Kjdpexb Nv Usfx Ag Uedg Determination of compressive strength

Condition: excellent (used), For sale: precision measuring instrument UNIVERSAL CONCENTRICITY GAGE, manufactured in the USA, designed for measuring concentricity, runout, straightness, and inspection of rotating components. The set comes complete with a Blankenhorn 0.01 mm or Käfer 0.01 mm dial gauge (Made in Germany). Features a stable base, precise guides, and a holder with micrometric adjustment. The technical condition is very good – the equipment is fully operational, sourced from a German quality control department. Technical data: • Manufacturer: Universal Gage Co., USA • Model: Universal Concentricity Gage • Accuracy: 0.01 mm • Measuring range: approx. 0–100 mm • Gauge: Blankenhorn / Käfer – Made in Germany • Condition: used, functional, very good Ksdpfx Agoxtwxue Ujdg

Condition: good (used), Hardness tester functional Kdjdpfxsxr Atbo Ag Ujg

Condition: used, SLA5800 Biotech - MFC - Digitally controlled mass flow controller for gas, Mass Flow Controller elastomer-sealed mass flow controller, flow control, flow meter, flow controller, thermal mass flow BROOKS INSTRUMENT Type SLA585081BAB1A2S1 Ser. No. 01C00500222 Year of manufacture 2020 (new / unused in original packaging) SLA5800 Biotech series Option package Biotech Premium Packet Code T Mains connection 13.5 - 27 VDC (plug M8, 5 pin, male) Power consumption max. 10 watts PROFINET interface (2x RJ-45) Visual display 2 LEDs (NET / MOD) Gas connection 6 mm Swagelok Valve design Normally closed User gas O2 (oxygen) Active - Multiple / O2 (oxygen), N2 (nitrogen), CO2 (carbon dioxide), AIR (air) Calibration gas N2 (nitrogen) Kdjdpfeuqgbyjx Ag Ujg Flow control ranges (full scale) 20000 sccm (20 liters / minute) Maximum inlet pressure 4500 psi (300 bar) Normal operation Pressure differential 60 psig (4 bar) Control range 2% to 100% of full scale (range of mechanism) Typical accuracy from 20 to 100 % ± 0.9 % of set point for 20 to 100 % of full scale Typical accuracy from 2 to 20 % ± 0.18 % of full scale for 2 to 20 % of full scale Repeatability ± 0.2 % of the measured value Resolution 0.1 % of full scale Typical response time of the controller

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 4NTV88BXIHR, overall weight: 848 kg, fuel type: diesel, tank capacity: 190 l, color: red, power: 16 kW (21.75 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 16 kW (21.75 HP), nominal power (apparent): 20 kVA, continuous power: 16 kW (21.75 HP), continuous power (apparent): 20 kVA, total length: 2,150 mm, total width: 1,040 mm, total height: 1,550 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yanmar, type of cooling: water, fuel consumption (combined): 3 l/100km, fuel consumption (urban): 3 l/100km, fuel consumption (extra-urban): 3 l/100km, fuel: diesel, fuel tank capacity: 190 l, battery capacity: 100 Ah, battery voltage: 12 V, input voltage: 380 V, input frequency: 50 Hz, input current: 32 A, operating temperature: 25 °C, ambient temperature (min.): -25 °C, ambient temperature (max.): 45 °C, control cabinet height: 1,550 mm, control cabinet length: 2,150 mm, control cabinet width: 1,040 mm, noise level: 65 dB, protection type (IP code): IP65, rotational speed (min.): 1,500 rpm, temperature: 25 °C, type of input current: three-phase, warranty duration: 12 months, Equipment: documentation/manual, mobile diesel tank, De Bredenoord 20 KVA generator is een betrouwbare en veelzijdige oplossing voor tijdelijke en langdurige stroombehoeften in diverse omgevingen. Het aggregaat is ideaal voor mobiel gebruik en voldoet aan de emissie-eisen van Stage V. De efficiënte Yanmar motor, gecombineerd met een Stamford generator, levert uitstekende prestaties en lage operationele kosten. De generator is uitgevoerd in een geluidsisolerende omkasting die zorgt voor een minimale geluidsuitstoot, ideaal voor gebruik in geluidsgevoelige omgevingen (super silent). De kast is voorzien van dikke, oliebestendige geluidsisolatie en externe stekkerdozen met zekeringautomaten voor extra veiligheid. Met een brandstoftank van 190 liter heeft de generator een autonomie van maximaal 48 uur bij continu gebruik. Het systeem werkt op diesel, HVO of GTL brandstof, wat zorgt voor flexibele brandstofopties. ### Technische Specificaties: - Model: Bredenoord 20 KVA - Nom. vermogen: 20 KVA - Max. vermogen: 20 KVA - Motor: Yanmar 4TNV88BXIHR - Generator: Stamford borstelloze alternator (AVR) - Vermogen: 20 KVA - Voltage: 230/400 V, 50 Hz - Toerental: 1500 tpm - Geluidsniveau: 65 dB(A) op 7 meter - Brandstoftank: 190 liter - Autonomie: - 100% PRP: 40 uur - 70% PRP: 56 uur - Motorvermogen: 16 KW - Batterijlader en motorverwarming: Standaard aanwezig - Control panel: Comap MRS16 (auto start/stop) - Afmetingen (L x B x H): 3,38 m x 1,03 m x 1,5 m - Gewicht: 848 kg - Emissieklasse: Stage V ### Brandstofverbruik: - 100% PRP: 4.7 L/h - 70% PRP: 3.42 L/h - 50% PRP: 2.3 L/h ### Opties: - Motorverwarming Kdjdpfx Aev Rncisg Usg - Batterijlader - 3-weg brandstofkraan - XXL brandstoftank Geluidsdemping: De generator is ontworpen met geoptimaliseerde luchtinlaten en speciale isolatiematerialen die geluid minimaliseren. De geluidsisolatie is versterkt met wol van verschillende diktes om geluid over een breed frequentiespectrum te reduceren. Dit maakt het ideaal voor gebruik in geluidsgevoelige gebieden. Duurzaamheid: De omkasting is bestand tegen corrosie dankzij een verflaag die getest is voor meer dan 2000 uur (C5I-H). Dit zorgt voor een lange levensduur, zelfs in de meest uitdagende omstandigheden. Veiligheid: De generator is uitgerust met versterkte sloten en roestvrijstalen scharnieren. De deuren zijn ontworpen met een afgeschuinde hoek van 20 graden om waterophoping te voorkomen en oxidatie te minimaliseren. Transport en Verplaatsing: De generator is gemakkelijk te verplaatsen dankzij versterkte hijsogen en stalen balken, die zorgen voor eenvoudig transport op bouwlocaties. Het ontwerp zorgt voor een stabiele en veilige verplaatsing van de generator zonder risico op schade. Klantspecifieke Aanpassingen: De Bredenoord 20 KVA generator is beschikbaar in verschillende uitvoeringen, van 20 KVA tot 500 KVA. Klantspecifieke aanpassingen zijn mogelijk, waardoor de generator kan worden aangepast aan specifieke eisen en toepassingen. Certificeringen: - CE-gecertificeerd - Europese makelij Toepassingsgebieden: De generator is geschikt voor diverse sectoren, waaronder de bouw, industrie en andere toepassingen waar betrouwbare en efficiënte stroomvoorziening vereist is.

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Kdjdpfeya Ev Njx Ag Uog Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climatic Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for temperature and humidity testing of multiple test specimens simultaneously. Kjdpjx Eabpjfx Ag Uodg Device Description: This climatic test cell enables you to evaluate the function or material properties of test items under the influence of temperature and humidity. Efficient air circulation with a high recirculation rate ensures optimal environmental transfer to the test samples. The air treatment section is positioned at the rear of the chamber interior. The refrigeration units are accessible in a separate frame located behind the device. The control system is housed in a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber features a self-regenerating compressed air dryer. A blower system allows the chamber to be purged with fresh air as needed. Technical Performance Data: Temperature Testing: - Temperature range: -60°C to +100°C - Temporal temperature deviation: ±0.5 to 1 K - Rate of temperature change (linear, with test item and thermal radiation, measured at supply air): - Heating: 2 K/min from -40°C to +85°C - Cooling: 2 K/min from +85°C to -40°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +89°C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±1% to ±3% r.h. Technical data is based on an ambient temperature of +25°C, nominal voltage 400 V, without samples, without radiation, and without additional equipment. Dimensions: - Internal dimensions (test chamber/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm - External dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Configuration: - Cooling unit: Water-cooled, low-noise, semi-hermetic, infinitely variable power regulation via electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A Notes: - Inspection by appointment possible (46325 Borken) - Shipping via freight forwarder possible – costs and arrangements upon request - Scope of delivery: (See image) (Specifications subject to change and errors excepted!) We will be happy to answer additional questions by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description: This climate test chamber allows you to evaluate the performance or material properties of a test item under the influence of temperature and humidity. Efficient air circulation with a high recirculation rate ensures optimal temperature and humidity transfer to the test specimen. The air treatment compartment is located at the rear of the interior chamber. The system units are housed in a separate frame behind the chamber and are easily accessible. The control system is installed in a separate control cabinet, with the operator panel integrated into the cabinet door. For humidity control, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be flushed with fresh air via a blower. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and radiant heat measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point area: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3 % RH over time The technical data apply to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, radiant heat, or additional features. Dimensions: Interior (Test Chamber/Usable Space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm External dimensions: - Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: Kdodpfx Asx Eaxbjg Ujg - Refrigeration unit: water-cooled, low noise, semi-hermetic, with stepless capacity adjustment via electronic monitoring and control system - Environmentally-friendly refrigerants: R 23 / R 404 A Notes: - Inspection available by appointment (46325 Borken) - Shipping by freight carrier possible – costs and arrangements upon request - Scope of delivery: (see picture) (Subject to technical modifications and errors in specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in and drive-in climatic chamber designed for simultaneous temperature and humidity testing on multiple test specimens. Device Description The climate test chamber allows for functionality or material property testing of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high level of recirculating air volume ensures excellent transfer to the test item. The air treatment compartment is located at the rear of the test chamber. The aggregates are positioned behind the unit in a separate frame for easy access. The control system is integrated into a separate control cabinet. The control panel is mounted in the door of the control cabinet. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air via an internal blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and heat radiation, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3% rH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test item, without external radiation and without additional devices. Dimensions: Internal dimensions (test space/usable volume): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection rating: IP 54 Technical Execution: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: Inspection by appointment possible (46325 Borken) Shipping by forwarding agent possible – Costs & organization upon request Scope of delivery: (see photo) (Subject to change and possible errors in the technical data; information provided without liability!) For further questions, we are happy to assist you via telephone. Kdedpfsx D Abpox Ag Ueg

Condition: excellent (used), Pfeiffer Pfeiffer Vacuum HLT 560 Helium Leak Detector Professional Leak Testing, Sniffer & Vacuum Operation Description: For sale is a professional helium leak detector Pfeiffer Vacuum HLT 560. The device is designed for highly precise leak detection using helium and is typically used in industry, manufacturing, quality assurance, laboratories as well as technical service. It is suitable for safe detection of even the smallest leaks. The HLT 560 operates using mass spectrometry and can be used in both vacuum and sniffer modes. With the sniffer probe, leak locations can be specifically pinpointed, while in vacuum mode, entire assemblies or systems can be tested. An integrated turbopump and forepump make the device a complete, mobile test system. Applications (examples): - Leak testing of components and assemblies - Testing of vacuum chambers, pipelines, valves, heat exchangers - Quality control in production - Service and maintenance work on vacuum equipment Technical Data: Manufacturer: Pfeiffer Vacuum Model: HLT 560 Test gas: Helium Measuring principle: mass spectrometric helium leak detection Operating modes: vacuum operation / sniffer operation Reference leak rate: (7.4 ±15 %) × 10⁻⁷ mbar·l/s Dimensions (approx.): Kdodpfsyaxu Ssx Ag Ujg Height: 110 cm Width: 50 cm Depth: 60 cm Interfaces: RS232, RS485, Relay I / II, Gauge port Power supply: 230 V / 50 Hz Power consumption: approx. 400 VA Weight: approx. 44 kg Condition: used Scope of delivery: (see picture) (Specifications and information subject to change and error!) Further questions can gladly be answered for you by phone.

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) Kdsdpfjrt U Nuox Ag Uog We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 1997, Technical details: max. wheel diameter: 5 - 350 mm max. module: 20 weight of the machine ca.: 0,8 t min. module: 0,5 dist. between centers: 5 - 750 mm table diameter: 260 mm z-axis: 600 mm y-axis: 185 mm max. helix angle: 45 ° Kodpfxjx Uzvve Ag Usdg

Condition: excellent (used), Year of construction: 1975, Breaking device . bar material dia. 10 - 45 mm bar material stranggepreßte NE-Stangen Kedpeit Ev Tefx Ag Uedg weight of the machine ca. 3 t Bending and breaking device simple and sturdy device to detect internal flaws in extruded non-ferrous metal rods +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Binder Model MKF 115 E3.1 Binder Climatic Test Chamber Model MKF 115 E3.1 Temperature range: -40 °C to +180 °C Humidity range: 10 % RH to 98 % RH Integrated 20 L water reservoir 4 potential-free relay contacts APT.line™ preheating chamber technology Programmable condensation protection for samples Heated viewing window with LED chamber illumination Humidity control with capacitive humidity sensor and steam humidification BINDER Multi Management Software APT-COM™ Basic Edition Fault diagnosis system with visual and audible alarms Intuitive touchscreen controller with time-segment and real-time programming Internal data logger, measurement data exportable in open format via USB 50 mm access port with silicone stopper, left side Class 2 temperature safety limiter (DIN 12880) with visual alarm 4 casters (2 with locking brakes) Computer interface: Ethernet 230 V outlet on right side control panel Adjustable ramp function Integrated strip chart recorder Real-time clock Door heating Alarm notification on low water level in the fresh water tank 2 stainless steel shelves Hose burst protection, incl. water supply and drain up to 1m height Kdedpex Ux Ivofx Ag Ueg Interior chamber made of stainless steel Cooling by compression refrigeration unit TECHNICAL DATA: Cabinet dimensions: Width 1000 mm Height 1725 mm incl. feet/castors Depth 865 mm incl. lugs &/connections Interior dimensions: Width 600 mm Height 480 mm Depth 400 mm Volume: Chamber volume 115 liters Net device weight (empty) 280 kg Max. total load 60 kg Max. load per shelf 30 kg Performance data Temperature: Temperature range -40...180°C Temporal temperature deviation 0.1...0.6 ± K Spatial temperature deviation 0.1...1.3 ± K Average heat-up rate according to IEC 60068-3-5: 5.5 K/min Average cool-down rate according to IEC 60068-3-5: 4.5 K/min Max. heat compensation 2500 W Climate performance data: Temperature range 10...95°C Humidity range 10...98 % RH Temporal temperature deviation depending on setpoint 0.1...1.3 ± K Max. heat compensation 400 W Electrical data: Rated voltage 400V 3N~ ±10% 50Hz Rated power 4.5 kW 7.5 A Energy consumption at 25°C / 60% RH 1.25 kW Fittings: Number of shelves 4/4 (std./max.) Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors!) If you have further questions, we would be happy to answer them by phone.

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Kdodpfsx Up Igox Ag Ujg Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: used, Tool measuring instrument Make Mitutoyo Type quick set R Kedpfjddtuyjx Ag Ujdg

Year of construction: 2014, condition: new, digital length measuring device make Heidenhain ID 355 533-04 measuring bar type LF 481 - signal 1Vpp - measuring length 200mm Kedpfsb T Uqiox Ag Usdg

Condition: excellent (used), Test beams Kdedpfog N Achex Ag Usg Test beams Make Mauser defective, see picture length 350 mm width 190 mm Height. 60 mm in wooden case

Year of construction: 2000, condition: used, Sold for parts, ADU card missing. Automatic tablet testing system - Laboratory measuring equipment - Tablet tool Enables testing of: Hardness Diameter Thickness Weight Precision balance Sartorius WZ64S Scale : 10 à 50 g Unit : mg / 0,5 mg / 0,1 mg adjustable Thickness Drive: stepper motor. Measuring principle: linear potentiometer. Unit of measurement: mm or inch. Tolerance: +/- 0.1 mm Hardness Kedpex Rz I Djfx Ag Uedg Drive: stepper motor. Measurement: load cell (lmz) Measurement principle: dynamometric gauge Unit: N, Kp or Sc Diameter Drive: stepper motor. Measuring principle: stepper motor. Unit of measurement: mm or inch. Scale: 3 - 18 mm / 3 - 30 mm (manual) Tolerance: +/- 0.1 mm Tension : 100 / 240 V, 50Hz / 60 Hz The UTS is a universal, fully automated testing system developed for use in industry. This tool is the approved model of a series of test systems that have been tested over many years. It was developed in close collaboration with the pharmaceutical industry. The UTS 4.1 can be used to test round, oval, square and oblong tablets, as well as many special shapes. For delicate oblong tablets, the proven oblong centring system (OZB) can be integrated. All parts requiring cleaning can be removed quickly and easily without any tools. The test system can be supplemented with various options, such as a distributor and/or sample collector with a different number of stations. Use the UTS as a laboratory tester or an online control device connected to a tablet press. Sampling can be triggered either in the production machine or using the TTS11 software.

Condition: used, This listing is for a European Instruments Oxford F1 200g Weight. The unit is in full working condition and is ready for immediate release. The European Instruments Oxford F1 200g Weight is a high-precision weight used for checking the accuracy of balances and scales. Here are some key features and facts about this weight: Weight Class: The Oxford F1 200g Weight belongs to the F1 weight class, which is a high-precision weight class. Material: The weight is made of stainless steel, which is a durable and corrosion-resistant material. Kodpfxjxxzcuo Ag Uodg Weight Denomination: The weight is available in a denomination of 200g, which is a common weight denomination for laboratory and industrial applications. Supplied in: The weight is supplied in an ABS plastic box, which provides protection and convenience for storage and transportation. Serial Number Identified: Each weight is serial number identified, which ensures traceability and accountability.

Condition: used, This listing is for a Hanna Instruments HI 9060 Waterproof Thermistor Thermometer The unit is in full working condition and is ready for immediate release. The Hanna HI 9060 is a high-performance thermistor thermometer specifically engineered for use in challenging wet and humid environments. Its robust design and advanced features make it an essential tool for professionals in the food industry and other applications requiring precise temperature monitoring. Key Features: Waterproof and Rugged Design: Built to withstand harsh conditions, the HI 9060 is waterproof and can endure the rigors of busy environments, ensuring reliability in various settings. Dual-Level LCD Display: The intuitive dual-level LCD display shows the current temperature alongside the highest and lowest temperature extremes recorded during the session, allowing for quick assessments. Temperature Measurement: Measures temperatures in both degrees Celsius and Fahrenheit, providing flexibility for diverse applications. Interchangeable Probes: Compatible with a range of interchangeable probes (sold separately), enabling users to customize the thermometer for specific tasks or environments. Advanced Memory Functions: Equipped with memory capabilities that store high and low temperature readings, facilitating easy tracking and reporting of temperature variations. Kdjdsxxz Htspfx Ag Usg Long Battery Life: Enjoy an impressive battery life of up to 3000 hours, minimizing the need for frequent replacements and enhancing operational efficiency. Auto-Off Capability: The thermometer features an auto-off function that conserves battery life by shutting down after a period of inactivity. Low Battery Detection: Alerts users when battery levels are low, ensuring that the thermometer is always ready for use. Ideal Applications: Food Services: Essential for monitoring temperatures in kitchens, ensuring food safety and compliance with health regulations. Food Preparation: Perfect for checking temperatures during cooking and baking processes, helping to maintain quality and safety. Packaging: Ideal for verifying temperature conditions during food packaging, ensuring that products meet safety standards. Storage and Transport of Food: Crucial for monitoring storage temperatures in refrigerators and freezers, as well as during transit, to prevent spoilage. Wet and Humid Environments: Designed to thrive in damp settings, making it suitable for various applications beyond food service, such as laboratories or agricultural environments.

Condition: used, This listing is for a Grant Instruments QBD2 Heatblock. The unit is in full working condition and is ready for immediate release. The Grant QBD / QBH series are a versatile range of high quality digital dry block heating systems with excellent temperature control and a wide choice of interchangeable blocks for maximum flexibility. The outstanding performance of the QBD / QBH series is based on advanced digital temperature control combined with high quality, precision-engineered blocks providing excellent thermal contact. The result is accurate, reproducible and safe heating of your samples. There is a full range of models and options to cater for basic through to more sophisticated applications - choose from three digital systems with 1, 2 or 4 interchangeable blocks (QBD models) and one digital high-temperature system (QBH2) with 2 blocks. These are complemented by an extensive range of interchangeable heating blocks to accommodate your sample tubes - from our standard range of blocks or tailored to suit your application. In addition, for 2-block systems QBD2 and QBH2 we offer accessory blocks for accommodating microplates and microtube strips. Heating range ambient + 5°C to 130°C (all three QBD models) or ambient + 5°C to 200°C (QBH2). - Rapid heat-up time. - Stability and uniformity ± 0.1°C. Ksdsxv Dwpspfx Ag Ujdg - Integral timer function optional external probe for in-sample or in-block temperature control. - Robust, compact, contemporary design. - Block extraction tool included as standard, for easy and safe removal of blocks.