Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Specification: Feed Speed 814m/min Workpiece Thickness: 8-60mm Dsdpfx Ae Afxuleb Aokw Edge Material Coil: 0.4-3mm Edge Material Strip: 0.4-8mm Joint Trimming 2x2.2kw Workpiece Pre heating EVA Gluepot Airtec Unit AT15 Edge Magazine Pneumatically Driven pressure Roller End Trim Unit Chamfer/Straight Top & Bottom Trimming Unit with Pneumatic Adjustment Contour Trimming Unit Profile Scraping Unit with Quick Change Heads Glue Joint Scrapers Buffers CE

Condition: used, operating hours: 335 h, total height: 2,100 mm, total length: 6,500 mm, total width: 1,500 mm, Year of manufacture: 2009 Colour: White Weight: 2.200 kg - Year: 2009 - Documentation available: Yes - CE marking present: Yes - Serial number: 74 - Operating hours: 335 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Type/Brand: 1856 - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Type/Brand: 1913 - - Tools available: Yes - └ 4th unit type: Cap unit - - Type/Brand: 1918 - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Type/Brand: 1826 - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Type/Brand: 1833 - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Type/Brand: 1929 - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Type/Brand: 1964 - - Tools available: Yes - └ 9th unit type: Brushing unit - - Type/Brand: 1940 - - Tools available: Yes - Max. edge band thickness [mm]: 8 - Min. panel thickness [mm]: 6 - Max. panel thickness [mm]: 60 - Min. panel width [mm]: 60 - Min. panel length [mm]: 180 - Min. feed speed [m/min]: 10 - Max. feed speed [m/min]: 18 - Glue system: Glue pot - Type of glue: PUR - Voltage [V]: 400 - Current consumption [A]: 56.95 - Fuse [A]: 80 - Transport dimensions: 6500mm x 1500mm x 2100mm (l x w x h) - Transport weight [kg]: 2200kg - Transport packages [pcs.]: 1 Dsdpj Ahygnofx Ab Aokw Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Specification: Vector Speed: X/Y= 50m/min Vector Speed: Z = 15m/min Workpiece length: min. 200 mm Workpiece length: max. 3050 mm Workpiece width: min. 70 mm Workpiece width: max. 850 mm Workpiece Thickness min: 8mm Workpiece Thickness max: 56mm Drill Block with 13 Vertical Spindles Drill Block with 4 Horizontal drills in the X Direction Drill Block with 2 Horizontal drills in the Y Direction Grooving Saw X Direction Plausibility Check 5Kw Tool Change Spindle 4 Position Tool Changer Energy Saving Mode 400V 50Hz Djdpj Acw Hnofx Ab Askw CE Marked

Condition: like new (used), Year of construction: 2021, functionality: fully functional, operating hours: 100 h, input voltage: 415 V, input frequency: 50 Hz, pressing force: 120 t, stroke length: 500 mm, table width: 1,300 mm, table length: 2,500 mm, throat depth: 1,000 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 1,000 mm, total length: 3,000 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 2,900 kg, Equipment: CE marking, SCM Sergiani PF Cold Platen Press, New 2021, Model PFH DIGIT 25/13 Platen area 2500 x 1300 mm, with 6 x 90 mm dia chromed hydraulic cylinders giving 120 tons pressure via a double rack and pinion Dkodpe Ad Hatefx Ab Aow system connected by a torsion bar to grant a planar movement of the movable press platen. Controlled by Siemens colour touch screen control panel. Suitable for pressing plasics, composites, wood inc door panels etc and some light sheet metalwork.

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 457256, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 5,100 m³/h, Equipment: CE marking, documentation/manual, VACUMOBIL JZ300-L Anti-static material surcharge Suction nozzle, Ø220mm - PZR Dedpe Ad I Nvofx Ab Ajkw "Online" dust extraction surcharge, Jx300 French documentation

Condition: good (used), Year of construction: 2003, used edge banding machine Model Hebrock AKV 3003 DKF Year of manufacture 2003 Direct glue application to the workpiece including joining unit Support divider for edge material High-frequency miter saw Chip collection box (miter saw) Pneumatic roller trimming Transport chain with permanently screwed-on special chain plates Double roller pressure (ball-bearing mounted) Outrigger (extendable towards the front) Automatic central lubrication (miter saw, corner milling cutter) Dkedpfxs Ahpbqj Ab Ajw Quick-heating glue tank (maintenance-free, Teflon-coated) Maintenance-friendly and operator-friendly design Corner milling cutter Surface trimming blade Chip collection box (trimming blade) Max. edge thickness 8 mm min/max. workpiece thickness 10 / 40* mm Min. workpiece length approx. 200* mm Min. workpiece width approx. 70* mm Feed speed approx. 10 m/min Ready for operation in approx. 6 min Max. power consumption 12 kW Electrical connection 400 V / 3 phases / 50 Hz Dimensions (length x width) 4300 x 1400 mm Dimensions (height) 1620 mm Weight 1250 kg

Condition: used, total length: 3,500 mm, total width: 1,500 mm, total height: 1,800 mm, Year of manufacture: 2008 Colour: White Empty weight: 1.400 kg - Year: 2008 - CE marking present: Yes - Serial number: 0040108 - Main motor power [kW]: 1.5 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Total stroke [mm]: 500 - Number of work zones [pcs]: 1500 - Number of levels [pcs]: 1 - Plate material: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 55 - Total pressure [Ton]: 30 - Voltage [V]: 400 - Current consumption [A]: 3.6 - Fuse [A]: 16 - Power [kW]: 75.0 - Transport dimensions: 3500mm x 1500mm x 1800mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information Dodpfx Abj Ahyp Ee Ajkw VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2020, machine/vehicle number: 931/20 TS90, functionality: fully functional, operating hours: 50 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, cutting width (max.): 4,300 mm, overall weight: 3,500 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, We offer this used Macmazza TS90 Beam Saw, year of construction 2020. Dkedpfxozzdyzo Ab Aew Manufacturer: Macmazza Model: TS90 Year of construction: 2020 Condition: used Category ID: 1426 Type ID: 844 Type: Beam Saw 2020 MACMAZZA TS90 4300 × 4300 CNC BEAM SAW – ONLY 28 HOURS OF ACTUAL WORKING TIME Price: €39.900net – negotiable An exceptional opportunity to purchase a 2020 Macmazza TS90 automatic horizontal CNC beam saw with extremely low operating hours. The machine was originally supplied in the United Kingdom as an ex-demonstration machine and has subsequently seen very limited use in our bespoke joinery workshop. It is in excellent condition, fully operational and currently installed. RECORDED OPERATING DATA • Total Hours Machine in Operation: 49 hours 46 minutes • Total Hours Machine in Working: 28 hours 31 minutes • Total Saw Blade Cutting Distance: 571.5 metres • Total Production Recorded: 129.6 m³ All operating data can be verified directly through the machine’s control system. TECHNICAL SPECIFICATION • Manufacturer: Macmazza • Model: TS90 • Year of manufacture: 2020 • Serial number: 931/20 • Cutting length: 4,300 mm • Pusher stroke: 4,300 mm • Maximum cutting height: 90 mm • Installed power: 15 kW • Power supply: 400 V, 50 Hz, three-phase + N + PE • Control voltage: 24 V DC • Full-load current: 30 A • Machine weight: 3,500 kg • Computer-controlled operation • Integrated cutting optimisation software • Automatic rear pusher • Pneumatic grippers • Scoring unit • Air-float front supporting tables • CE marked ADDITIONAL ORIGINAL MACMAZZA GRIPPER The machine has been upgraded with an additional genuine Macmazza pneumatic gripper, supplied and professionally installed through R&J Machinery. The additional gripper and professional installation cost £2,685.90 + VAT. Supporting invoice available. CONDITION AND INSPECTION The machine is in excellent condition and has completed only 28 hours and 31 minutes of actual working time. It is currently installed and can be inspected and demonstrated under power by prior appointment. Further photographs, videos, operating-hour records, original documentation and invoices are available upon request for serious enquiries. LOCATION AND COLLECTION Located in Perivale, West London, United Kingdom. Sale terms: EXW – Ex Works. Dismantling, loading, transport and recommissioning are the responsibility of the purchaser. PRICE €39.900 net – negotiable Serious enquiries only. Please contact us to arrange an inspection or request further you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with a jointing unit (planing unit) and a veneer support table. Robust machine construction by Langzauner. A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer. Cutting length max. 3500mm. Cutting and jointing height max. 40mm. Easily guided unit, runs on two hardened, ground linear guide shafts. Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display. The support table is very robustly constructed and runs on parallel round guides; it is slightly offset to the right so that cross-cuts can be made on the left side of the veneer packs. Angle stop on the support table and on the front support for end cuts of the veneer packs. Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from warping. Pneumatic workpiece clamping, also holds in the center position. Drive motor saw 2.2kW, milling unit 1.1kW. Dkjdpo Afznuefx Ab Aow The motors can be conveniently switched on at the handle and only run when needed. When switched on, the saw and milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions via a turret stop. Carbide-tipped precision cutting blade, sharpened. Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included. Practical front veneer support, which is automatically extended pneumatically when using the planing unit. Extraction connection 150mm with extraction duct. V-belt renewed. CE marking. Emergency stop cord. Operating manual. Onboard tools. Original paint, only a few spots have been touched up. The machine is in excellent condition and has clearly been used only rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: used, Year of construction: 2015, Length 12000 mm Width 9000 mm Used manual overhead conveyor system with a SCHUKO paint mist extraction unit and a warm-air supply system. Includes a cross-flow heat exchanger (heat recovery) and a manual overhead conveyor; in very good, well-maintained condition. Manufactured 2015–2016. ----- Sold on behalf of a client! The system is still in operation and available for inspection. Price is ex-site; dismantling to be performed by the buyer ((Scissor lift and forklift available on-site)). Group 1: Dry-type paint mist extraction system, model FARBMEISTER: ----- Dedpfxj Ahkkhj Ab Aekw Model FARBMEISTER-25/30, including a stationary paint mist extraction wall with dry-type filtration. Baffle/filter area: H x W 2,790 x 3,140 mm (cardboard filter cells). Features a centrally positioned, solid baffle panel designed to reduce the maximum required airflow, tailored to the specific frames and casements being painted. Includes an additional pull-down pre-filter. This reduces the effective extraction area—and consequently the total airflow—from a standard ~14,000 m³/h to the required 10,500 m³/h. Also includes a 250 mm deep extension around the perimeter (left, right, and top) to improve the capture of overspray. A high-performance centrifugal fan (model L-EX 500) with a 5.0 kW motor, capable of an exhaust air volume of 10,500 m³/h (free-blowing), including all necessary ductwork and components to construct and install the extraction system—extending through the wall to the outside—as well as a manually adjustable exhaust air damper. Group 2: Warm Air/Supply Air System for the Spray Booth: ----- BB 1,100 warm air/supply air system for the spray booth, including a supply air unit (model WZL110-com) equipped with an integrated heating coil (hot water connection, supply temperature +80°C). The unit has an air capacity of 10,500 m³/h and a 5.0 kW motor. The required heating capacity, based on a temperature differential (Delta-T) from -15°C to +22°C, is 137 kW. The system features an automatic louver damper at the air intake to seal off the ductwork and prevent cold air from entering when the system is not in operation. It also includes an explosion-proof warm-air thermostat designed to shut down the system in the event of a loss of heating capacity (hot water supply). This group encompasses all ductwork and supply air components, spanning from the external air intake to the air outlets in the distribution ceiling located above the spray wall. A cross-flow plate heat exchanger for heat recovery from the exhaust air duct leading outdoors, while simultaneously preheating the fresh air drawn in from outside. With an exhaust air temperature of +20°C and a fresh air temperature of -12°C, this results in an energy saving of approximately 58 kW of heating capacity. Includes all necessary duct and pipe components for integrating the exhaust and supply air lines with the plate heat exchanger, in accordance with the attached planning drawing. Also includes a maintenance/repair switch and a differential pressure monitor for supervising the intake filter. Please note that the heat exchanger core must remain easily accessible for routine maintenance and cleaning. Group 3: Electrical System Control for Paint Mist Extraction: ----- Electrical system control for paint mist extraction...

Condition: used, operating hours: 19,216 h, total width: 2,300 mm, total height: 2,400 mm, total length: 2,420 mm, Year of manufacture: 1998 Colour: White Empty weight: 2.000 kg - Year: 1998 - CE marking present: Yes - Serial number: 98055541 - Operating hours: 19216 - Number of units [pcs]: 3 - └ Unit 1: - - Position: Right - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 250 - - Roller material: Rubber - - Motor power [kW]: 18.5 - └ Unit 2: - - Position: Right - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 170 - - Roller material: Rubber - - Motor power [kW]: 15 - └ Unit 3: - - Position: Top - - Type of unit: Texturing brush - - Roller diameter [mm]: 140 - - Motor power [kW]: 0.55 Dsdpo Aazaaofx Ab Ajkw - Max. working width [mm]: 1300 - Min. working height [mm]: 2 - Max. working height [mm]: 165 - Infeed table length [mm]: 120 - Outfeed table length [mm]: 800 - Feed motor [kW]: 1.5 - Feed speed: Manual - Min. feed speed [m/min]: 5 - Max. feed speed [m/min]: 25 - Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 35 - Fuse [A]: 63 - Power [kW]: 37.0 - Transport dimensions: 2420mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1966, functionality: fully functional, Milling fence with fine adjustment Sliding table Crosscut saw Aigner table extension with Holz-Her ETZ feed unit, 8 speeds 380 Volt Dodpfsx U Dfgex Ab Ajkw Shipping possible at extra cost!

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide-belt sanding machine with electronic segmented sanding pad and finish sanding capability. Ideal sanding machine for interior finishing companies, also suitable for intermediate sanding of lacquered surfaces. Edge banding machine with combination unit and electronic articulated pressure bar, with edge segments that can be switched on and off. Segment width of the pressure bar: 35mm. Djdpozqvmrefx Ab Aekw Contact roller pneumatically adjustable, low wear due to ribbed steel roller. Grain size compensation. Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency converter from 2 - 18 m/s. Belt feed speed steplessly adjustable via frequency converter from 2.5 - 13 m/min. Pneumatic workpiece-controlled belt blowing device. Cleaning brush at the outlet. Constant working height of 900mm by adjusting the upper part of the machine, thus also integrable into sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340mm. Workpiece height approx. 3 to 150mm. Common sanding belt dimension: 1360 x 1900mm. 3 rubberized pressure rollers. Infeed roller table and foldable outfeed table. Preparation for vacuum blower. The carpet is perforated and connectors for an optional blower are available. Alternatively, the carpet can also be connected to the extraction system. Extraction connection: 1 x 200mm, 1 x 140mm, and 2 x 100mm. Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar contact points at the front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller. CE marking. Operating manual. Without the illustrated connecting cable. Original paint, only spot-repaired in places. Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (LxWxH). Weight approx. 2400kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this supplier".

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Weinig Powermat 700 (Solid Profile P700) 6 spindle four-sided planer machine * Machine as new, 0 operating hours * 6x Weinig Powerlock with 8000 RPM Bottom - right - left - top - top - bottom Feed speed 5-40 m/min Infeed table 2 meters Axial and radial CNC adjustments for spindles 2, 3, and 5, 6 Djdpfx Abs Ahifhs Aekw Radial CNC adjustment for spindle 4 Table surfaces with Marathon coating Automatic Waxilit pump Operating concept Comfort Set Powercom Plus

Condition: good (used), Year of construction: 1989, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 530 mm, tool diameter: 110 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, total length of planing tables: 880 mm, total width: 880 mm, total height: 1,150 mm, overall weight: 660 kg, S530i thickness planer, - Planing width 530 mm, - Planing height 300 mm, - Table length 880 mm, - Feed rate 5/8/12.5/19.5 m/min, - 4-knife cutterhead, diameter 110 mm, Dedpfe Ahnlijx Ab Askw - Speed 5000 rpm, - Motor 4.0 kW, - Electrically adjustable table height, - Digital display for reading the thickness, - L x W x H 1070 x 880 x 1150 mm, - Weight 660 kg.

Condition: used, functionality: fully functional, working height: 950 mm, working width: 400 mm, type of input current: three-phase, total length: 3,000 mm, overall weight: 300 kg, total height: 1,500 mm, total width: 650 mm, The Leif & Lorentz Angled Curtain Coater is an industrial coating machine designed for the fast and consistent application of coatings to wood and other suitable workpieces. With a coating width of 400 mm and an inclined conveying system, the machine is particularly suitable for coating long wooden workpieces and profiles. Depending on the shape of the product, the angled design allows two sides to be coated in a single pass. Dsdpfx As Ahqpyjb Ajkw The coating quantity and feed rate can be adjusted to achieve the desired result. This specific Leif & Lorentz Angled Curtain Coater is available as a used machine. The machine is in fully working condition and has been completely inspected in our workshop.

Condition: excellent (used), Year of construction: 1999, Veneer saw and precision cutting saw with a scoring unit and veneer stop table. A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick-cut veneer. Cutting length max. 4200mm. The saw unit and scoring unit are combined in a single unit, so that only one unit needs to be moved. Easy-to-guide saw unit, runs on ground and hardened shafts. The function of the scoring blade with two diamond cutting edges is comparable to that of a planing head. Rear support table with a continuous finger stop, adjustable from approx. 2 - 50cm, with pneumatic clamping. Pneumatic workpiece clamping. Veneer support made of wear-resistant hard plastic. Drive motor 2.2kW. Carbide-tipped precision cutting blade, sharpened. Scoring blade with PKD (polycrystalline diamond) tips, sharpened. Practical front veneer support. Angle stop on the left. Dust extraction connection 80mm. Dust extraction hoses and V-belts renewed. Maintenance unit and compressed air hoses renewed. CE marking. Operating manual. Onboard tools. Dkodpj Ahrgajfx Ab Aow Saw blade and re-cutting blade freshly sharpened, so ready for immediate use. Partially repainted. Dimensions approx. 5550 x 1200 x 1600mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this supplier".

Condition: used, total width: 2,100 mm, total height: 2,400 mm, Year of manufacture: 2002 Colour: Blue Empty weight: 3.000 kg Dimensions (LxBxH): 410 x 210 x 240 cm Price: On request - Details: - └ Description: Needs repair - Year: 2002 - CE marking present: Yes - Serial number: 96164 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Tool present: No - └ Spindle 5: - - Spindle type: Top - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 6: - - Spindle type: Bottom - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 Dkedpfxj Ahx Tqs Ab Aow - - Tool present: Yes - Feed table length [mm]: 945 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 14 - Tool type: Standard - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 400 - Fuse [A]: 63 - Transport dimensions: 4100mm x 2100mm x 2400mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 1999, Double-sided multi-purpose edge sanding machine with oscillation and 200mm sanding height. Langzauner LZK 4-S with veneer edge sanding side and solid wood sanding side. 200mm sanding width. Motorized sanding belt oscillation, therefore no compressed air connection required. Drive motor 400V / 3kW. Front work table for sanding veneer edges with grooved stop guide (for veneer overhang). Dedjz I T Apspfx Ab Askw Veneer sanding attachment with fine adjustment, foldable. Spring-loaded table, height adjustable and can be positioned laterally. Angle stop. Rear, inclinable work table for sanding solid wood. Both tables are height adjustable to utilize the sanding belt. Belt dimensions 3000 x 200mm. Side extension table for radius sanding on the 150mm belt roller. Feed stand holder 68mm. Central dust extraction connection 140mm. Very stable chassis, 2 swivel casters, 2 steering casters and lever brake for locking. CE marking. All graphite pads and dust extraction hoses have been replaced. Original paint, only touched up in places. Excellent condition from a small restoration workshop. Some sanding belts are included. Dimensions approx. 1800 x 1000 x 1250mm (L x W x H). Weight approx. 650kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this seller".

Condition: used, Year of construction: 2004, Composition: Lower jointer 15kW Planer straight 11 kW Gauche planer 11 kW Top planer 15 kW Planer straight 11 kW Gluing left? Wait: 'Raboteuse gauche 11 kW' in French means 'Left planer 11 kW'. Dodpfx Abe Agpc He Aekw Planer for top finishing 15kW Planer/planer horizontal lower finishing 11kw Drive power 11 kW 8 workstations Digital positioning Chrome table Counterplayers Lubrication 400 V

Condition: good (used), Year of construction: 2016, Experience seamless operation with all movements meticulously controlled by NC technology, ensuring swift and precise cuts every time. Boasting CNC controlled cutting height as standard, this machine provides unmatched versatility and precision in your cutting operations. Tailored for the demands of the roof truss and timber frame industries, this 3-axis CNC upstroke crosscut saw sets the standard for accuracy and reliability with a 700mm saw blade and 7.5hp motor. Whether you're tackling compound angle cutting or executing long scarf cuts, the HMZ-3 delivers flawless results with every cut due to its large cutting height of up to 250mm and capability to handle even the most intricate cutting tasks. An onboard optimisation package is included which allows cutting lists to be test optimised against timber lengths to generate a pre-optimised cutting list. Specification Dksdpfx Ae Agnz Nob Aow 6000mm infeed capacity Right-to-left feed orientation HM-Z saw unit with 700mm blade and centre-line cutting 4000mm outfeed table Onboard optimisation Outfeed monitor

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Bargain due to business closure Dkjdpfx Abe Ah D Hfj Asw Striebig Standard 3 TRK

Condition: good (used), Year of construction: 2020, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, spindle diameter: 30 mm, pivoting range: 45 °, actuation type: electric, table width: 780 mm, table length: 2,500 mm, overall weight: 660 kg, 5.5 kW, -45/+45° tiltable, electric height and swivel adjustment, left/right, 6 speeds, Aigner stop, 2 x 500 mm, digital display on the fence, table 2500 mm x 780 mm, Djdpsykar Hsfx Ab Aekw mechanically programmable fence with two displays, system for quick removal from the work table, including Felder 3-roller feed system. New price: €18,700.00 Available approximately September 2026. Shipping possible for an additional charge!

Condition: like new (used), Year of construction: 2019, operating hours: 137 h, T45 thicknesser from Martin with Tersa cutterhead Planing width approx. 630 mm Planing height adjustable electrically from 2.8 to 300 mm, with digital display for reading in 1/10 mm accuracy with positioning control. Dksdpfx Aez Icvlsb Aew The control system also offers the possibility of incremental adjustment, i.e., you can, for example, set a value of 1 mm and then repeatedly press the start button to change the planing height by 1 mm each time, without having to set a new absolute height each time. Furthermore, 99 fixed values can be saved as a program. Drive motor 5.5 kW with automatic motor brake 4-knife Tersa cutterhead with new knives Feed rate 6 + 12 m/min Rubber-coated infeed roller Rubber-coated outfeed roller Planed machine table guided on four leadscrews and guides for optimal stability Low-noise design with soundproof hood Dust extraction port 160 mm Emergency stop at the front and rear New Tersa knives Operating manual CE marking Original paint, not repainted Carpet in original condition No scratches on the table!! Only 137 operating hours, i.e., only 25 minutes per week!!! Dimensions approx. 1200 x 1300 x 1250 mm (L x W x H). Weight approx. 1200 kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this seller".

Condition: used, Year of construction: 1989, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 530 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 4,900 rpm, total length of planing tables: 2,752 mm, total width: 900 mm, total height: 1,100 mm, overall weight: 810 kg, PF 530i surface planer, - Year of manufacture: 1989, - Planing width: 530 mm, - Table length: 2752 mm, Djdpfxe Ahnr Ee Ab Aekw - Electrically adjustable infeed table - Speed: 4900 rpm, Diameter: 125 mm, - 4-knife cutterblock, planing knives 530x30x3 mm - Adjustable fence, swivels 45°, - Motor: 4.0 kW / 5.5 hp, 400V, - Control panel located on top, - Dust extraction port: 160 mm.