Used Wood splitters for sale (42)

Condition: good (used), Year of construction: 2017, Functionality: fully functional, pto shaft: Yes, overall weight: 8,500 kg, type of motor: three-phase motor, fuel: diesel, feed length X-axis: 6,000 mm, cutting length (max.): 1,100 mm, Equipment: front-end loader, trailer coupling, Pinosa CPE 1200 Semi Automatic Firewood Processing Machine Machine Type: Firewood Processing Machine Year: 2017 Condition: Very Good, has had very little use. Powered By: 3 Phase, Diesel Generator or PTO. Includes FG Wilson P110 110kVA Diesel Generator Feeding Deck Extraction Conveyor with Sieve and Cyclone for Sawdust Machine Description This is a mobile, self-contained wood cutting and splitting machine. It allows you to saw and split sizes of wood from 50 to 480mm diameter, while being movable. The machine can thus be transported on a truck, then installed on demand autonomously using 4 jacks. It is therefore suitable for both the service provision market and for on-site production. Finally, note that it only requires a single operator to produce up to 16T of firewood per hour . Technical Specifications Dqm23T Blade Diameter: 1200mm Max Length of Tree Trunk: 6000mm Min Length of Tree Truck: 800mm Max Diameter of Tree Trunk: 480mm Min Diameter of Tree Trunk: 50mm Max Cut Off Length: 1100mm Min Cut Off Length: 200mm Splitting Possibilities: 2-4-6-8-10-12-14-16 Splitting Cylinder Power: 35T Max Hourly Throughput: 16T/H Power Connection Options: Electric Motor/Electric Generator/PTO Motor Power: 37kW Machine Weight: 8500kg

Condition: like new (used), Hydraulic log splitter, working Kn0Yziaf Details on request

Condition: new, High-performance Firewood Processor with 20 Tons of Splitting Force - Brugger SA48 Pro! The Brugger SA48 Pro log splitter is the perfect solution for quickly and effortlessly processing logs with a diameter of up to 48 cm into high-quality firewood. Its well-thought-out yet simple design distinguishes this machine, which not only requires low maintenance but also facilitates repairs. This impressive device is equipped with either a powerful 14 HP Kohler petrol engine or a 9.5 kW 400V electric motor. The SA48 Pro does not rely on electronic control but is operated purely by mechanical components such as hydraulic valves with levers. Specifications: Maximum cutting length: 55 cm Maximum diameter: 48 cm Splitting force: 20 tons 55 cm bar Extra-wide 3.2 m conveyor belt Hydraulic feed up to the chainsaw Pivoting conveyor belt Automatic chain lubrication Despite its high splitting force and large diameter capacity, the log splitter remains relatively compact. Equipped with a drawbar, it can be attached to any trailer hitch, allowing for easy transportation. Additionally, two people can easily move the log splitter by hand on a flat surface without the need for a vehicle. Bfzp0Ehmdlc The length of the firewood can be adjusted continuously up to 55 cm. The splitting wedge can be manually adjusted in different positions using a lever, allowing for 2-way, 4-way, or even 6-way splitting, depending on the thickness of the wood. Optional equipment such as the log lifter or chain conveyor further facilitates the work process. The chain conveyor allows for loading multiple logs using a forklift, crane, or front loader, eliminating the need to lift one log at a time. Prices: Brugger SA48 Pro: €9,749 6-way knife: €199 8-way knife : €299 Additional PTO drive (for electric or gasoline): €949 Log lifter: €1,498 Chain infeed log deck: €1,898

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, For sale automatic saw splitter self-made The splitting diameter goes up to 52cm The splitting cross and the guide are original parts from Binderberger type SSP520 Pro Dpee0F Logs up to 5m can be processed I also have a crane that drives the hydraulic pump with a diesel engine, which could also be used to drive the splitter Details can best be explained on the phone The splitter can be demonstrated at any time Videos are at you Tube Price ,-NetVB

Condition: good (used), Year of construction: 2011, operating hours: 9,700 h, Functionality: fully functional, Operating hours: 9700 Splitting force: 35 t max. log diameter: 55 Posch automatic saw splitting machine Spaltfix K 540 Year of construction 2011 approx. 9,700 operating hours log diameter max 55 cm 35 tons splitting force approx. 18 logs per operation Max. Length: 8.00 m Width: 3.60 m Height: 2.90 m Weight: 4,400 kg Log length adjustable from 20 to 50 cm Split Control Cvbpk3Ob including various saw chains, blades, spare splitting wedge, various spare parts such as sensors etc.

Condition: good (used), Year of construction: 2006, overall weight: 1,600 kg, I sell a saw and splitter for wood HAKKI-PILKE BIG X-47 simple to use and very fast and powerful machine. Maximum thickness of cutting and splitting 47 centimeters. Length adjustment by photocell, splitting force up to 30 tons. The machine used in good technical condition. I will provide more information by email or phone. Cvcednzp8U

Condition: new, Year of construction: 2024, Functionality: not functional, overall weight: 550 kg, fuel: super 95, Our latest model 2024 RM 480 B-T20 now has a hydraulic saw blade, a hydraulic log hold-down device and a hydraulic splitting crosscut height adjustment, it is a useful helper when processing firewood, sawing and splitting in one operation and simultaneous removal via the adjustable conveyor belt simplifies the work. Logs up to 3 meters long can be placed on the standard table and logs with a diameter of 48 cm can be cut steplessly into lengths of up to 60 cm and are split with 20 tons. Price with electric motor 10 HP RM 480 E-T20 7150,- net with petrol engine 15 HP RM 480 B-T20 7050,- net The splitter has a 15 HP gasoline engine The firewood processor weighs 550 kg with its trailer and can be easily moved by hand, Features: log diameter 48 cm maximum cut length 60 cm Infeed conveyor 1.8 m long goes up to the saw blade Outfeed belt width 25 cm and can be swiveled 15° to the side As standard: Hydraulically lowerable blade (pressure and sawing speed can be individually adjusted) Hydraulic log hold-down device Hydraulic gap cross height adjustment Infeed conveyor 1.8 m long Br2Pwwn89Oq Outfeed conveyor 0.25 m wide, swivels sideways 4 + 6 gap crosses With the optionally available lifting table or chain conveyor, log lengths of up to 6 meters are possible. The splitting machines are mounted in an iron transport frame without hydraulic oil part Final assembly approx. 4 hours Minor paint damage may occur during transportation.

Condition: refurbished (used), Wood waste and bark shredder ERJO. Completely renovated. Yan knives and counter knives installed. 7Rtarp7O9X

Condition: new, High-performance Log Splitter with 20 Tons of Splitting Force - Brugger SA48 Pro! The Brugger SA48 Pro log splitter is the perfect solution for quickly and effortlessly processing logs with a diameter of up to 48 cm into high-quality firewood. Its well-thought-out yet simple design distinguishes this machine, which not only requires low maintenance but also facilitates repairs. This impressive device is equipped with either a powerful 14 HP Kohler petrol engine or a 9.5 kW 400V electric motor. The SA48 Pro does not rely on electronic control but is operated purely by mechanical components such as hydraulic valves with levers. Specifications: Maximum cutting length: 55 cm Maximum diameter: 48 cm Splitting force: 20 tons 55 cm bar Extra-wide 3.2 m conveyor belt Hydraulic feed up to the chainsaw Yywrnk82 Despite its high splitting force and large diameter capacity, the log splitter remains relatively compact. Equipped with a drawbar, it can be attached to any trailer hitch, allowing for easy transportation. Additionally, two people can easily move the log splitter by hand on a flat surface without the need for a vehicle. The length of the firewood can be adjusted continuously up to 55 cm. The splitting wedge can be manually adjusted in different positions using a lever, allowing for 2-way, 4-way, or even 6-way splitting, depending on the thickness of the wood. Optional equipment such as the log lifter or chain conveyor further facilitates the work process. The chain conveyor allows for loading multiple logs using a forklift, crane, or front loader, eliminating the need to lift one log at a time. Prices: Brugger SA48 Pro: €9,749 6-way knife: €199 8-way knife: €299 Additional PTO drive (for electric or gasoline) : €949 Log lifter: €1,498 Chain conveyor: €1,898

Condition: new, Year of construction: 2024, Vertical design for splitting short and metre logs Low base plate for easy, low-fatigue loading of large logs Mechanical log lifting device brings heavy logs into position without strain on the operator's back With splitting material catcher Fast, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety circuit Comfortable transport with hand drawbar due to standard chassis with hard rubber wheels and additional support wheel Shock and scratch resistant due to high quality powder coating Space-saving storage due to easily lowerable cylinder Dimensions and weights Length approx. 1440 mm Width/depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type electric motor Input power 3,5 kW Electrical data Supply voltage 400 V Mains frequency 50 Hz Equipment data Splitting force max. 14 t splitting length min. 560 mm splitting length max. 1040 mm splitting material diameter min. 100 mm splitting material diameter max. 300 mm Hydraulic system Bxcwsibk Tank capacity hydraulic oil 7,5 l Location: ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Horizontal X-splitter model FAM 500 For processing round timber segments with a max. diameter of 500 mm or with a max. passage height of 500 mm. With hydraulic hold-down device and a conveyor belt with hydraulic motor. The splitting force is 18 tons. Electric drive with 15 kW motor. A height-adjustable infeed belt with a robust 3-ply rubber mat (7 mm) driven by an oil-hydraulic motor. Dgm28Sc7R

Condition: new, Year of construction: 2024, HOW WASTE BECOMES IMMEDIATE PROFIT Cvxf903E9P TRV 1200L Ø550 The practical and fast all-rounder in the sawmill, TRV 1200L Ø550 is used in environments that mainly produce firewood. Saw mills that need to dispose of large quantities of laminated trimmings and lateral logs have found in the TRV 1200 the ALLY to process all the daily waste produced nonstop, transforming it into FIREWOOD. Here’s WASTE TRANSFORMED INTO PROFIT. Strengths: – Trimmings and waste are simply loaded haphazardly onto the low-wear conveyor belt. – A locking system allows working with overlapping pieces of different thicknesses and shapes. – Each sector (TOTAL SECTORS 5) has an independent pneumatic cylinder with dampers. – Automatic cutting control from PLC with timing for the length of cut pieces. Safety First: – Access door to moving parts protected by safety micro switch with forced opening. – Unique, non-duplicable sealed key commercially. – Protective cover tunnel complete with safety micro switch with sealed key. – Blade motor with rapid stop (less than 10 seconds). – Thick blade protection cover. – Drip air lubricator. For the most demanding: with dedicated accessories, the full potential of the TRV 1200L is utilized. We suggest a motorized inclined WASTE DISCHARGE BELT - COMBINED TRANSFERS to low-wear belts. TRV 1600L Ø700 The largest version of the wood cutter produced by Cursal is the TRV 1600L Ø700: practical and fast, it is used in environments that mainly produce firewood. Saw mills that need to dispose of large quantities of laminated trimmings and lateral logs have found in the TRV 1600 the ALLY to process all the daily waste produced nonstop, transforming it into FIREWOOD. Here’s WASTE TRANSFORMED INTO PROFIT. Strengths: – Trimmings and waste are simply loaded haphazardly onto the low-wear conveyor belt. – A locking system allows working with overlapping pieces of different thicknesses and shapes. – Each sector (TOTAL SECTORS 6) has an independent pneumatic cylinder with dampers. – Automatic cutting control from PLC with timing for the length of cut pieces. Safety First: – Access door to moving parts protected by safety micro switch with forced opening. – Unique, non-duplicable sealed key commercially. – Protective cover tunnel complete with safety micro switch with sealed key. – Blade motor with rapid stop (less than 10 seconds). – Thick blade protection cover. – Drip air lubricator. For the most demanding: with dedicated accessories, the full potential of the TRV 1600L is utilized. We suggest a motorized inclined WASTE DISCHARGE BELT - COMBINED TRANSFERS to low-wear belts.

Condition: new, Year of construction: 2024, Functionality: fully functional, overall weight: 550 kg, type of motor: electric motor, Our latest model 2024 RM 480 E-T20 now has a hydraulic saw blade, a hydraulic log hold-down device and a hydraulic splitting crosscut height adjustment, it is a useful helper when processing firewood, sawing and splitting in one operation and simultaneous removal via the adjustable conveyor belt simplifies the work. Logs up to 3 meters long can be placed on the standard table and logs with a diameter of 48 cm can be cut steplessly into lengths of up to 60 cm and are split with 20 tons. Price with electric motor 10 HP RM 480 E-T20 7150,- net with petrol engine 15 HP RM 480 B-T20 7050,- net The splitter has a 10 hp electric motor The firewood processor weighs 550 kg with its trailer and can be easily moved by hand, Equipment: log diameter 48 cm maximum cut length 60 cm Infeed conveyor 1.8 m long goes up to the saw blade Outfeed belt width 25 cm and can be swiveled 15° to the side As standard: Hydraulically lowerable blade (pressure and sawing speed can be individually adjusted) Hydraulic log hold-down device Br2G7Oekjqe Hydraulic gap cross height adjustment Infeed conveyor 1.8 m long Outfeed conveyor 0.25 m wide, swivels sideways 4 + 6 gap crosses With the optionally available lifting table or chain conveyor, log lengths of up to 6 meters are possible. The splitting machines are mounted in an iron transport frame without hydraulic oil part Final assembly approx. 4 hours Minor paint damage may occur during transportation.

Condition: good (used), Line for cutting and splitting firewood PINOSA Brand - PINOSA Italy Model - EPC 3300 Construction year - 2004. G0Cp7Qr The condition is excellent, the machine is in operation and it is possible to test it. Cutting with a circular saw from Vidia material. Fully automated with the possibility of cutting only, as well as cutting and splitting. Max cutting diameter 40cm. Max log length 4m. Pressure force 35 tons. Electric motor power - 2x22 kW.

Condition: new, The Brugger SA38 impresses with an impressive splitting force of 12 tons and is the ideal solution for the quick and uncomplicated transformation of tree trunks into high-quality firewood. Logs up to 38 cm in diameter can be transformed into firewood with ease. The SA38 is characterized by its simple yet sophisticated design, which not only ensures high reliability, but also facilitates maintenance and repairs. Technical data - Up to 38cm diameter - Splitting power of 12 tons - 50cm Oregon sword - Log length from 20 - 50cm - Optional log lifter or chain conveyor - Weight 450kg Depending on your individual requirements, various drive options are available, a powerful 14 HP Kohler gasoline engine, a 7.5 kW 400V electric motor or a PTO drive with three-point linkage. Dmbtcz Prices Brugger SA38 - 5.499€ infeed conveyor 100cm - 590€ discharge conveyor 350cm - 895€ 6-way splitting knife - 199€

Condition: good (used), Firewood cutting saw Jcfkqxn

Condition: new, The log splitter is currently in stock. Delivery possible immediately. Bobguwqhm8K Viewing possible by appointment

Year of construction: 2024, Condition: new, - Tubular screw Ø 10/15/20cm - Standard screw: Ø 15/20/25/30/40/50/60/80cm - Screw with carbide teeth: Ø 20/30/40/50/60cm Doenur - Screw for vine cultivation: Ø 50 cm - Screw for planting: Ø 50 cm

Condition: new, The Brugger SA38 impresses with an impressive splitting force of 12 tons and is the ideal solution for the quick and uncomplicated transformation of tree trunks into high-quality firewood. Logs up to 38 cm in diameter can be transformed into firewood with ease. The SA38 is characterized by its simple yet sophisticated design, which not only ensures high reliability, but also facilitates maintenance and repairs. Depending on your individual requirements, various drive options are available, a powerful 14 HP Kohler gasoline engine, a 7.5 kW 400V electric motor or a PTO drive with three-point linkage. Technical data - Up to 38cm diameter - Splitting power of 12 tons - 50cm Oregon sword - Log length from 20 - 50cm - Optional log lifter or chain conveyor - Weight 450kg Prices Brugger SA38 - 5.499€ Bfzpzao9Akw infeed conveyor 100cm - 590€ discharge conveyor 350cm - 895€ 6-way splitting knife - 199€

Condition: new, Year of construction: 2024, - Simple three-point attachment - Very robust, welded, machine-made chassis Bmavb2I7Xdh - Versatile, powerful transmission from 30 to 90 hp - Vines from 10 cm to 80 cm in diameter and a maximum height of 1.80 m can be used - Offset of 1.30 m on each side of the axle - Chassis with a length of 245 cm

Condition: new, With the Brugger Power Split S22, we present a powerful vertical log splitter with an impressive splitting force of 22 tons. This robust machine is ideal for a wide range of applications and offers maximum drive flexibility - whether via the electric motor or the PTO shaft. The splitting process takes place at two speeds, which enables the wood to be processed quickly and efficiently. Special features: - 22T splitting pressure - Combined drive: 5kW electric motor & PTO drive - Weight: 335kg - up to 110cm log length - Log lifter - Two speeds A log lifter is included in the scope of delivery to facilitate the handling of heavy logs. A hydraulic cable winch is available as an option, which offers additional application options and makes work even easier. With a maximum splitting length of 110 cm, the Brugger Power Split S22 offers the flexibility to process even larger pieces of wood with ease. A support table for shorter pieces of wood is also available. The Brugger Power Split S22 is the ideal choice for anyone looking for a reliable and powerful solution for splitting wood - whether for professional or private use. Prices: Power Split S22 = 2.670€ Support table for short logs = 125€ 4 compartment splitting wedge = 99€ Hydraulic cable winch = 595€ Contact us for your customized offer! Drcposm8

Condition: new, Year of construction: 2024, - Weight: 470kg - Dimensions (WxH): 1.46x3.20m Bmau93Wgz0S - Pressure: 170bar - Enables working on the left, right and in the axle of the tractor

Condition: new, With the Brugger Power Split S30, we present a powerful vertical log splitter that impresses with a splitting force of 30 tons. This robust machine is extremely versatile and offers maximum flexibility in terms of drive, whether through the electric motor or the PTO shaft. The splitting process takes place at two speeds, which enables the wood to be split quickly and efficiently. Special features: - 30T splitting pressure - Combined drive: 5.5kW electric motor & PTO drive - Weight: 386kg - up to 110cm log length - Log lifter M077Liv3M - Two speeds A log lifter is included in the scope of delivery to facilitate the handling of heavy logs. A hydraulic cable winch is available as an option, which offers additional application options and makes work even easier. With a maximum splitting length of 110 cm, the Brugger Power Split S30 offers the flexibility to process even larger pieces of wood with ease. A support table for shorter pieces of wood is also available as an option. The Brugger Power Split S30 is the ideal choice for anyone who needs a reliable and powerful solution for splitting wood, whether for professional or private use. Prices: Power Split S30 = 2.960€ Support table for short logs = 125€ 4 compartment splitting wedge = 99€ Hydraulic cable winch = 595€ Contact us for your customized offer!

Condition: new, Year of construction: 2024, - Weight: 690kg / 740kg - Dimensions (LxWxH): 2.20x1.00x3.25m - Maximum impact force due to 140 kg weight - Enables working on the left, right and in the axle of the tractor Ibc2I2Bcp

Condition: new, Year of construction: 2024, - Weight: 155kg Doenqz - Dimensions (LxWxH): 1.30x1.30x2.30m - Beat frequency: up to 2400 beats per minute - Bell inner diameter: 80mm