saw-blade dia. 1 mm
Cutting height 160 mm
Motor output 7,5 kW
Control ja
SALVADOR SUPERANGLE 600 OPTIMUS from our demonstration room in Oberkochen
-----
Automatic sliding saw for angle cutting, wood optimization and
Defects capping.
Material length before cutting max = 6,100 mm, min = 1000 mm
Cross sections max.
at 0 degrees: 100 x 380 - 160 x 310 mm
at +/- 45 degrees: 100 x 260 - 160 x 220 mm
at +/- 70 degrees: 100 x 120 - 160 x 100 mm
For a detailed description, see the adjacent PDF.
...
NOT AVAILABLE UNTIL END AUGUST 2021
With a high speed upstroke saw action which depending on cutting paterns can give up to 40% more production than the standard machine. The machine is primarily designed for programmable and repetitive cutting from standard and / or random lengths of timber.
The new high speed pneumatic saw unit with variable speed control, can also be set to limit the saw stroke when cutting smaller boards, helping to increase production even further.
The pusher is fitted...
Cross-cut saw centre
Optimizing cross-cut saw Dimter OptiCutS 90 XL
Automatic cutting out of wood defects and cutting of fixed lengths (defect cutting + optimization) with one quality.
The saw optimizes the measured wood length, taking into account the chalk markings, according to the given cutting list and thereby maximizes the wood yield.
Positioning slide for higher performance through continuous loading. While one board is still being processed, the next board can be placed in the proces...
infeed 6.600 MM for chalk marking, 10 HP crosscut saw
Outfeed 5.000 MM with two ejectors
Bxtt00x8zh
Dimter cross-cut system for sawing and optimizing wood and subsequent sorting.
Consisting of:
- Feed roller conveyor with marking station
- cross conveyor
- infeed
Pkuip
- saw
- Outfeed with sliders
- compressor
- For self-dismantling and self-collection.
Microtec GoldenEye 501 / 502 X-ray
Multisensor scanner for determining the quality of sawn timber in the inline transport
Scope: Capping
Type of wood: Spruce, pine
Length of the slat: 2000mm - 6000mm
The slat width: 45mm - 190mm
Bd82u9gkrd
Thickness of the plate: 18mm - 80mm
Wood surface: Rough (circular saw cut, clean surface)
Moisture content: 8% - 18%
Wood temperature: up to + 40 ° C
Maximum feed rate GOLDENEYE: from 80 m / min. up to 150 m / min (depending on the cross section)
Board gap in ...
saw-blade dia. 600 mm
Cutting height 160 mm
Motor output 5,5 kW
SALVADOR SUPER ANGLE 600 OPTIMUS
Automatic pushfeed for angle cutting, wood and optimization
Defects capping.
Detailed description see accompanying PDF.
Benqmf9yj3
(Technical data according to manufacturer - without guarantee!)
Optimizer PAUL 11 MKL
- German production
- year of production 2001
- full optimization
- cutting cycle time 0.4 s
TECHNICAL SPECIFICATIONS:
main engine power 5.5 kW
cutting width max. 180 mm
Bx89cumeyc
cutting height max. 90 mm
blade diameter 500 mm
cutting cycle time 0.4 s
max. material length 3500 mm
min. material length 300 mm
feed speed max. 200 m / min
acceleration of 25 m / s2
automatic feeding system
seven ejectors
4000 mm long cross chain feeder
length of the receiving table 11500 m...
Paul optimizing saw with Woodeye scanner and complete mechanization
Year of manufacture 2000
consist of:
Pos Description Dimensions Lx W x H
Pos 1 Cross conveyor with accelerator for feeding the workpieces into the Woodeye scanner 5,5m x 2,2m x 1,8m
Pos 2 Woodeye scanner 1,5 x 2,0 x 2,5m
Pos 3 Paul belt conveyor from Woodeye scanner with 3 ejectors 7,8m x 2,5m x 2,5m
Pos 4a Paul MKL 11m optimizing crosscut saw 2m x 1,7m x 1,8m
Pos 4b Spare parts machine Paul MKL 11
Bduu290pm
Pos 5 Belt conveyor ...
Effective machining length - 4000mm
Effective processing width - 30-230mm
Effective processing thickness - 40-80mm
Bxkrmcyx0t
Effective machining in the cross-section - 250x30mm
Scanning speed - 80m / min
Scanning device - Infrared sensor
Scanning / catching defects - Fluorescent sensor
Table height - 900mm
Feed speed - 60m / min
Servo drives - DELTA
Cutting saw - H450xD30
The diameter of the stub pipe - 100mm x 1
Total power: 9kW
Overall dimensions - 6750 x 1450 x 1800mm
Transport dimensions: 5...
Semi-automatic optimising crosscut saw with electronic positioner with push/stop mode
COSTCUTTING OPTIMIZING SAW
Superpush 150 is the centre for the cutting and entry level optimisation. It is designed as the true technological evolution of traditional cutting methods, able to increase productivity and improve wood yield.
EXTREMELY ROBUST
Very robust and reinforced steel structure.
Horizontal plane with mobile protection to favour the loading of the work piece.
Carriage with custom-made stop f...
CURSAL TRV OPTIMIZATION LINE
marking table
input conveyor - transverse
automatic machine loading
Bfaq2enw
TRV 2200 - CROSS SAW
automatic longitudinal optimization machine
program entry computer and machine control
optimization at prices, in multiple quality classes
max sawing cross section
minimum sawing cross section
minimum processing length
camera for determining width and recording errors
sawing machine
conveyor belt for cutting elements
pressure pneumatic chains
sawing unit - table saw
sa...
saw-blade dia. 500,550 mm
Cutting height 120,150 mm
Motor output 5,5-7,5 kW
Benqmzcdr8
SALVADOR SUPERPUSH 200 OPTIMUS
-----
Pusher saw with optimizing and failure recognizing and cutting
Maximum entrance length: 6.200 mm
Maximum thickness 120 mm, optional 150 mm
Maximum width 300 mm
Detailed description in german see pdf-file.
!!!! We have showroom machine available - see stock number 1305-2332 !!!!
Inspection in showroom Oberkochen always possible.
(technical details according to manufa...
Customizable according to your requests
The principle of our loading and unloading systems is:
All “stupid” actions and movements can be done automatically with solutions that can be amortized within a limited time.
THE CURSAL AUTOMATION SYSTEMS ARE PERFECTLY INTEGRATED TO THE VARIOUS TYPES OF CROSS-CUT SAWS CREATE FULLY AUTOMATIC CYCLES.
The perfect solution for optimizing the entire production process, reducing labor costs.
The feeding of the tables, first manual with idle times and very slo...
The Slim Line SL 110 is designed for automatic cross cutting of workpieces in single cut, program cut or package cut. The computer control allows for a single cut, more complex cuts and recurring program cuts for production runs.
It is actually a SlimLine 170 and can also be easily converted to the 170 with the larger saw blade and therefore larger cutting area.
The cross-cut system is designed as a speed version with a faster feed motor.
Hb9y9zpl0
Price net basis for negotiation.
Further techni...
Crosscut saw with electronic pusher and controlled axis.
Combines the reliability of the pneumatic under table crosscut saws with electric pusher and the feed system with pinion and rack and motorization with brushless motor and planetary gear, precision encoder.
3 versions for 3 integrated solutions BASE/OPTI/OPTI PLUS
BASE: designed for machining material with constant lengths and single or pack feeding. 3 optimisation options (maximum length, sequence and workpiece sequence).
OPTI: function f...
Grecon optimisation crosscut saw 2004
5 METER infeed chain with measuring station
Saw Grecon 2004 full optimization
Srkpe0
(But we also have the same machine complete again)
Optimization crosscut saw OPTICUT 104 R CE 1997 max entry length 6 mt
Bwyo7iqxft
saw-blade dia. 550 mm
Cutting height 150 mm
Motor output 7,5 kW
Dimensions (L/W/H) 11300x1800x1800 mm
SALVADOR SUPERPUSH 200 OPTIMUS, out of out exhibition room
-----
Pusher saw with optimizing and failure recognizing and cutting
Maximum entrance length: 6.200 mm
Maximum thickness150 mm
Maximum width 300 mm
Detailed description in german see pdf-file.
Machine can be seen producing in our showroom!
Ntnyv
(technical details according to manufacturer - wihout guarantee!)
Customizable cross cutting saw according to your requests
TRSI Ø600 CUTTING 90 °
THE SOLUTION FOR BEECH SAWMILL
Sturdy, automatic and optimizing cross-cut saw with pusher feeding and modular monobloc structure, equipped with a Ø 600 blade.
The big cutting widht makes this cross-cut saw is suitable for cutting beech boards, normally with constant thickness and variable widths.
It uses two types of software for:
– PROGRAMMED CUT (sequences of fixed measures)
Pbfepp8
– OPTIMIZED CUT (optimizat...
DIMMER OPTICUT S90
Year of production: 2009
Machine serial number: 4514.33
Ytwymo
Circular saw blade ∅ 450x4,4/3,2x30mm 5100 r.p.m.
Power of the saw electric motor 13.5 kW
Total Power : 20 kW / 40A
The maximum length of the board : 7000 mm
Saw stroke on the servo motor (low air consumption )
Opticom direct control panel -control Polish and German language
Machine with full optimization
The machine is in very good condition
WS was born from the experience and professionalism of STROMAB. 1.
The WS.1 continuous cross-cut system with controlled axis, completely designed and built in Italy, has excellent features such as resistance, quality and reliability, and is an ideal tool for cross-cutting and removing defects on wood of any length.
Iplt00y2m
WS. 1 cross-cut system of the latest generation, which is an asset to any production cycle thanks to its high precision and speed combined with extremely easy operation. Com...
Description: CNC cross-cut system Paul MKL
Manufacturer: Paul
Year of manufacture: General Overhauled with latest technology
Condition: As good as new
Technical data: Cutting width 320 mm
cutting height 140mm
Saw blade diameter:600mm
Saw motor 5,5KW
Input length 1500mm-5400mm
Consisting of:
Marking station
Measuring station with fault detection
Crosscut saw Paul 14 MKL
CNC Maxi 5 control with optimization
Approx. 10m sorting belt with 3 pushers
Machine would be completely overhauled, all bearing...
New Optimizing saw SALVAPUSH 2000 by SALVAMAC
Bfxulyzsq9
The Salvapush 2000 comes with a brand new version of software that allows anyone to manage it in a simple and complete way like a smartphone, with a website graphic and all the practicality of setting data of a large touch screen, in digital communication between all the electronic components. New exclusive mechanical solutions are also present both for the cutting system and for that of the pusher, solutions that are demonstrating all t...
Weinig Dimter Opticut 200 Classic optimizer
- after the technical review
- year of production 2004
- declaration of conformity, DTR
- German production
TECHNICAL PARAMETERS:
min./max. entry length of the element 800/3500 mm
min./max. entry width of the element 80/200 mm
min./max. element input thickness 12/80 mm
type of wood hard / soft
dash cutting
wood classification
max. feed speed 120 m / min
acceleration 5 m / s
saw blade diameter fi 500 mm
saw hole diameter 30 mm
saw spindle speed 460...
TROA: CUT TO MEASURE
TROE: DEFECTS ELIMINATION
Customizable cross cutting saw according to your requests
Work autonomously. Cursal has studied this parting line with the aim of automating all board handling operations including the collection of separator strips.
The TROA-TROE cross-cut saw has been specially designed for parting off twisted and cracked unedged boards.
THE LOWER TOW KNOWS NO INTERRUPTIONS AND HAS A SELF-LIMITED SPEED OF 120 ML/MIN.
U0znqahm
(Towing characteristics: 5 rollers ...
Push feed optimizing saw with automatic loading chain system for the complete optimization of the wood and the elimination of the defects.
COSTCUTTING OPTIMIZING SAW
Biar0mux0y
Superpush 250 is a true technological evolution of traditional cutting methods. It is able to increase productivity considerably, reduce staff usage to a minimum, and improve wood yield.
EXTREMELY ROBUST
Very robust and reinforced steel structure.
Group to move up and down all the loading chain system.
The chain system ...
SECOND-HAND CROSS CUTTING SAW AGAZZANI T17A
- infeed and outfeed rollers
C3qwkyi8
- CE rules year 2002
Model 11 completely overhauled
Description: CNC cross-cut system Paul MKL or K or KE as desired
Manufacturer: Paul
Year of manufacture: General overhauled with newest technology
Condition: As good as new
Technical data: Cutting width 150 mm
Cutting height 85 mm
Saw blade diameter:450 mm
Saw motor 5,5KW
Input length as required
Bnvagoz
CNC Maxi 5 control with optimization
Sorting belt as desired
Machine would be completely overhauled, all bearings new motors new with latest eff
Class, new cont...
SALVAPUSH_2000
Innovative automatic and optimizing cross-cutting saw
A technological evolution of wood cutting systems.
The automatic optimizing saw SalvaPush_2000 is born from over twenty years of experience in wood optimizing saws.
The machine is the ideal solution to increase the yield of wood, to reduce the worked hours, facilitate staff activity, cut costs and increase profits. The operator has just to mark the quality of the wood and the presence of defects, the optimizing saw will do th...
Weinig Dimter OptiCut S90 optimizer
- after the technical review
- German production
- year of production 2005
TECHNICAL PARAMETERS:
max. length of the cut material 4500 mm
max. width 360 mm
max. height 160 mm
automatic length measurement
optimization in 4 quality classes
total power 13 kW
blade motor power 7.5 kW
pneumatic side and top pressure
disc diameter max. 500 mm
OptiCom Assist control
receiving conveyor 5600 mm
two ejectors
total length 13 m
element marking printer
cutting accuracy ...
MAXIMUM SPEED FOR LEADING COMPANIES IN THE WOOD MARKET
Customizable cross cutting saw according to your requests
We present you the jewel of high speed made by Cursal, TRV 2700EB, where experience, passion and know how are all included.
TRV 2700EB is the perfect solution for the company
– THAT MUST optimize big quantities of timber with varied qualities.
– THAT MUST definitively eliminate the indirect costs, to get a maximum profit from the precious wood raw material.
> Advanced brushless han...
Push feed angles cutting optimizing saw for the complete optimization of the wood and the elimination of the defects
PUSHER ANGULAR OPTIMIZING COST CUTTING SAW
Superangle 600 is the ideal cutting centre for angles optimized cutting. Direct technological evolution of traditional cutting methods, Superangle 600 is able to increase productivity, to guarantee the maximum precision and keep.
EXTREMELY ROBUST
Very robust and reinforced steel structure.
Pusher carriage dimensions mm. 300x345x25.
Too...
Optimizing cross-cut saw KP 500 Optim is designed for woodworking companies, which process massive wood and put maximum emphasis on the quality and yield of their production. Optimizing saw KP 500 Optim is used for cutting out defects and optimizing fixed lengths of blades in the production of glued blocks, boards, massive furniture parts, floor, floorboards, boards, packages, etc.
The stable and robust design of the optimization saw ensures accurate and rapid cuts in wood. Feeding equipment m...
Have been developed for the CNC- controlled cutting of large cross sections of waney or square-edged solid wood or glue-laminated sections.
Bgo0l3i2kx
Segmented top and continuous bottom feed rollers of a large diameter ensure precise guidance of even dificult timber- a prerequisite to the millimeter-accurate timpber positioning and the resulting high cut to length accuracy.
Movable measuring carriage for the non-contact cutting point and defect marking
Modern CNC control with touch screen
O...
Customizable cross cutting saw according to your requests
THE IDEAL OPTIMIZING SAW FOR SMALL AND MEDIUM SIZES.
– Full optimizing with quality defects selection
– Defecting
– Fixed measures sequences.
• Optimized in an ultra – fast and intelligent way, and you will process the most various orders without any stress for the operators. TRV 1200 permits you to cut single rude/painted boards with continuous cycle in a practical and fuctional way.
• Once inserted the cutting lists by the touch-scr...
Push feed optimizing saw for the complete optimization of the wood and the elimination of the defects.
COSTCUTTING OPTIMIZING SAW
Superpush 200 is a true technological evolution of traditional cutting methods. It is able to increase productivity considerably, reduce staff usage to a minimum, and improve wood yield.
EXTREMELY ROBUST
Very robust and reinforced steel structure.
Special 30° inclined plane to favour the loading and keep the work piece squared.
Pusher carriage dimensions mm. 300x345...
Optimizing cross-cut saw KP 900 Easy Cut is designed for companies that process solid wood and put maximum emphasis on the quality and yield of their production. Optimizing cross-cut saw KP 900 Easy Cut is used for cutting out defects and optimizing fixed lengths of blades in the production of woodblocks, boards, massive furniture parts, floors, floorboards, planks, packages, etc.
Solid and robust design of optimizing saw ensures accurate and fast cutting of wood.
Feeding equipment moves short...
HIGH SPEED OPTIMIZATION IN A SAWMILL?
WITH TRV 2000 NOW YOU CAN
Customizable cross cutting saw according to your requests
TRV 2000, it’s a trimmed/no trimmed boards optimizer, that includes – high precision – big cutting section – working speed.
Available in optimizing version (it uses the Cursal’s tested software used by the other set of optimizing saws) and it is the ideal ally to speed up the work cycle in sawmills.
It optimizes the external side of trunks from the defects – that with tr...
Through-feed optimizing saw controlled by numeric control and personal computer for the optimization of the wood and the elimination of the defects.
COSTCUTTING OPTIMIZING SAW
Supercut 300 is an extremely fast optimizer able to revolutionize your firm's production system. Really Fast: an exclusive dual workpiece feed system combined with an ultra-rapid cutting unit make Supercut 300 unique.
Bh9txy8270
EXTREMELY ROBUST
Very robust and reinforced steel structure.
The in-feed belt conveyor is syn...
ANGLED CUTTING FROM 20° TO 160° FOR SINGLE AND PACKS OF TABLES
Customizable cross cutting saw according to your requests
As for the pushing TRSI cut saw, the TRGSI is also structurally a monobloc (speed of installation, anti-vibration system, to cite few of the benefits)
Cutting program for individual boards and packs
• Cutting in fixed sizes – Sequence of measures
• By a CNC industrial computer you can quickly create and store a variety of cutting plans, while working up to 25 different siz...
Through-feed optimizing saw controlled by numeric control and personal computer with Brushless cutting system for the optimization of the wood and the elimination of the defects.
COSTCUTTING OPTIMIZING SAW
Supercut 500 is a high-speed optimizer able to meet the highest production capacities with utmost reliability.
EXTREMELY ROBUST
Very robust and reinforced steel structure.
The in-feed belt conveyor is synchronized and managed by the same motor of the advancing rollers. Exclusive system with ...
MONOBLOCK INCORPORATED PUSH-SYSTEM: THE MOST SOLD IN EUROPE AND WORLWIDE
Customizable cross cutting saw according to your requests
AUTOMATIC, CHEAP, SIMPLE AND INTUITIVE TECHNOLOGY (skilled staff is not needed).
Depending on your need, TRSI can be provided for programmed cutting or optimization, and can be used in many SECTORS such as:
> PACKAGING: Cutting to size for single plank or in packages, also perfect for cutting squares.
U03dks2v
> DOORS/WINDOWS: Optimizing and selecting qualities an...
Cursal was born 40 years ago, producing semi-automatic cross-cut saws, projected to select and cut single and packs in small – medium– big sections. Which is the main difference between a semi-automatic and an optimizing cross-cut saw? The difference consists in the cutting impulse that is given from THE USER, and in the other one comes from an internal computer.
Factotum cross-cut saw:
WIDE USAGES. It can do all the semi-worked types of wood and assailable materials such as: window frames, out...
Used Optimization Cross Cut lines
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
10 valuable tricks for buying used machines online
Sample sales contract for used machines in nine languages
Olympic Games: Machineseeker sponsors Team Germany
Machineseeker still biggest sponsors of 2nd German football league
Morlock Motors official partner of Machineseeker and Truckscout24
Sell now on Machineseeker! Over 220,000 inquiries per month
