Used Complete factories / machine bundles for sale (16)

Condition: used, consisting of the individual sub-items 1a-1j listed below: 1a) Production line: Panel sizing saw, make HOLZMA, year of manufacture: 2013 1b) Production line: Board on Frame (BOF), make: BÜRKLE, year of manufacture: 2012 1c) Production line: Board on Stripe (BOS), make: BÜRKLE, year of manufacture: 2012 1d) Production line: Lamination, make: BÜRKLE, year of manufacture: 2012 1e) Production line: Powerline 3: Line for 4-sided edge processing, make: HOMAG/ WEEKE, year of manufacture: 2013 1f) Production line: Powerline 4: Line for 4-sided edge processing, make: HOMAG/ WEEKE, year of manufacture: 2013 1g) Production line: Surface line 3, make: BÜRKLE/ BÜTFERING, year of manufacture: 2012 1h) Production line: Packaging line A and B, make: BARGSTEDT and others, year of manufacture: 2012 1i) Production line: Packaging line 7, make: HOMAG and others, year of manufacture: 2019 1j) Production line: Packaging line Multiboxstation1, make: GO GMBH and others, year of manufacture: 2020 as well as the right of first refusal for the necessary extraction systems and the compressed air technology of the KALLAX- production A SURCHARGE OF 10% IS CALCULATED FOR ITEM 1 (CONTRARY TO THE 13% SURCHARGE MENTIONED BELOW) ##### Complete Kallax production consisting of the individual sub-items 1a-1j listed below: 1a) Production line Panel dividing saw, make: HOLZMA, year of manufacture: 2013 1b) Production line Board on board, make: HOMAG and others, year of manufacture: 2019 2013 1b) Board on Frame (BOF) production line, manufactured by BÜRKLE, year of manufacture: 2012 1c) Board on Stripe (BOS) production line, manufactured by BÜRKLE, year of manufacture: 2012 1d) Lamination production line, manufactured by BÜRKLE, year of manufacture: 2012 1e) Powerline 3: Line for 4-sided edge processing, HOMAG/ WEEKE, year of manufacture: 2013 1f) Production line Powerline 4: Line for 4-sided edge processing, HOMAG/ WEEKE, year of manufacture: 2013 1g) Production line Surface line 3, make: BÜRKLE/ BÜTFERING, year of manufacture: 2012 1h) Production line Packaging line A u. B, make: BARGSTEDT and others, Year of manufacture: 2012 1i) Production line packaging line 7, manufactured by: HOMAG and others, Year of manufacture: 2019 1j) Production line packaging line Multiboxstation1, manufactured by: GO GMBH and others, Year of manufacture: 2020 as well as a right of first refusal for the extraction systems and compressed air technology required for the operation of KALLAX production FOR POSITION 1 A SURCHARGE OF 10% WILL BE CALCULATED (AGAINST THE 13% SURCHARGE REFERRED TO BELOW) Bqxcvskd

Condition: good (used), Year of construction: 1992, Complete size cutting line with cross cut saw Paul 20 E, Dividing saw Paul BK 34/800, Multi rip saw BK 34/800 Year of manufacture: 1992 The cutting line has already been dismantled by our employees and is ready for loading at our warehouse. All documentation is available. -Chain transporter with lifting platform -Cross cut saw Paul, type 20 E, 14 kW -Roller track -Transport band with sorting roll -Throw out station for short pieces -Transport band with centering facility -Dividing saw Paul, type BK 34/800, 25 kW -Cross measuring line Paul type AKA -Multi rip saw Paul, type BK 34/800, 75 kW -Safety channel -Sorting band for manual sorting -stacking station Ckr0c0qgg8 -synchronous run machine hydraulic pump 11 kW and other units 15 kW The line is completely in good working condition, incl. control cabinets, aprox. 6 saw spindles with saws, distance rings, and full documentation The line was used to cutting hardwood with the following sizes: Wood thickness 26 mm – 42 mm Infeed length at the cross cut saw 2500 – 5000 mm Working Length Dividing saw/Multi rip saw 350 – 1000 mm Strip width 6 – 30 mm depending on the number of sawblades on the sawspindle Working process: Start material: Beechwood 42 mm thickness dried to 8 % The operator lays the board on the roller track and the roller track transports the wooden board to the cross cut saw. The control is programmed with one main length and several short sizes. On this line length from 350 mm to 1000 mm can be cut. After the board is shortened it runs on a transport band to a roller track. Between transport band and roller track is a mangel roll to sort out short piece for burning wood. After the mangel roll is a throw out station. The main length are running into the dividing saw with the centering unit. After the centering unit the wooden boards are divided in the middle by the dividing saw. This production step avoids blockage of bend boards in the multi rip saw. Another advantage is the possibility to cut exactly along the tree edge of the board and the loss of narrowest board strip is now in center of the board. After the dividing saw the half board is transported on chain strings into the multi rip saw. During this transport the board runs below some measuring skids. This measuring skids determine the tree edge of the boards and by the separate adjusting chain strings the board is aligned in a way that it runs directly along the tree edge of the board into the multi rip saw. The mulit rip saw has a motor of 75 kW and can cut a thickness from 26 to 42 mm and length from 350 mm up to 1000 mm in strips from 8 mm to 25 mm depending on the equipment of the sawspindle. After the multiripsaw the wooden strips run on a transort band into a safety channel and from there they run on a chain transport on a sorting band where a worker does a quality sorting. After this band the wooden strips are stacked automatic by a chain transport into transport racks.

Condition: used, Year of construction: 2000, For sale is a machine package; partially in need of repair; consisting of: Nailing machine/template machine self-made; functional in connection with Holz Her magazines E8lvr37 Circular table saw Altendorf (n.a.) Block saw with burning station (in need of repair) Nailing table / stencil table Cross-cut saw / pull saw Bäuerle (n.a.) Weinmann Palettomat VK 260 with many accessories (functional but battery deeply discharged --> control unit must be replaced) Only for sale complete or individually against bid!

Condition: ready for operation (used), Year of construction: 1993, Production line, to produce sawdust support for pallets (2 briquetting machines, 2 BOGE compressors, multi-saws, grinders, IMAL sealer, 3 dryers, etc.). Dlpshpms Ready to use.

Condition: excellent (used), Year of construction: 1980, Complete line to make handles inclufing lathe - boring and sanding machine composed of : 1°machine : rotating machine for cutting the pieces. Max. length of pieces to cut : 1500 mm. The machine has a circular saw which cut the pieces up the max. length of 300 mm . 2°machine , Drilling macchine with automatic hopper feed. The cutting pieces by the 1st machine are loaded manually in the magazine (hopper ffeed) of the drilling machine and automatically transfered to the 3rd machine Y8u7l2 3°machine: HEMPEL mod. FED 25 – Automatic rotating milling machine with shaped tools which make the handels. The type of handel depend of the tools mounted in the machine. 4° Machine : HEMPEL PB 300 Automatic totating sanding machine with automatic hopper feed . The pieces are manually insert on the hopper feed Daily production , from 5000 to 7000 pieces in 8 hour. Max length of working pieces 300 mm There are many shaped tools for different handle shape Machine are in perfectly working conditions.

Condition: used, No. 3110 woodworking machine package Sales take place on behalf of the customer, from the Saarland location consists of the following used machines: - Dowel and row hole drilling machine SCHEER DB 22 2 drilling beams, adjustable in width up to 1100 mm - WÜRTH hardware drilling machine - Milling machine Bäuerle With feed device, not pivotable, spindle speed 2800 - 12000 rpm - Edge banding machine BLAICH - standing panel saw HOLZ-HER 1220 Cutting area: 5200 x 2100 mm, automatic feed - ALTENDORF F 45 III sliding table saw Sliding table 3000 mm, cutting width 1300 mm - CNC, saw blade diameter max. 500 mm, saw motor 5.5 kW - Vario, 2-axis scoring unit - Edge banding machine SUDHOFF K 73 Cross-cut saw, flush milling, copy milling, scraper, polishing unit - Drilling and assembly machine dowel machine HOLZMA HBM 26/1 TOPMATIC control, automatic drilling and assembly machine for concealed hinges and connectors, door and side drilling, etc. Iihaxz9vb Sale On behalf of the customer, ex works, without dismantling, without transport and assembly Subject to errors in the description and price Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale takes place in the ACTUAL condition Technical information, description of condition, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the rule is "bought as seen" Terms of payment: Prices plus statutory VAT, payment before pickup or shipping Terms of delivery: ex site

Condition: like new (used), The automatic line for the production of PVC foil wrapped MDF panels consists of. 1. Sittex pre-pressing line: - panel feeding belt - brush grinding machine - machine for cleaning and treating panels on flat surfaces and edges before gluing Cjw8o9ps8r - 5-axis automatic gluing robot with 2 spray heads, scanner at the entrance of the cabin, automatic self-cleaning - oven with 6 drying trays for adhesive drying 2. Orma Macchine hydraulic membrane press with automatic pin system 3. Sittex post-pressing line: - automatic system with vacuum for turning parts - bi-directional transport trolley - surplus foil cutting machine - surplus adhesive cleaning machine

Condition: good (used), Year of construction: 1998, Complete size cutting line with cross cut saw Paul GE 18 Year of manufacture: 1998 The cutting line has already been dismantled by our employees and is ready for loading at our warehouse. All documentation is available. 3nyuslvv -Chain transporter with lifting platform -Roller track -Cross cut saw Paul, type 18 E, 12,5 kW -Roller track -Transport band with sorting roll -Throw out station for short pieces -Transport band -Centering station -Multi rip saw Paul, type K 34 O/800 GL, 90 kW working width 800 mm, sawblade diam. 210 mm, 5200 rpm, synchronous run machine, saw spindle diameter 60 mm hydraulic pump 5,5 kW and other units 5 kW The line is completely in good working condition, incl. control cabinets, aprox. 6 saw spindles with saws, distance rings, and full documentation

Condition: ready for operation (used), Year of construction: 2011, HOMAG HIGH PERFORMANCE SURFACE AND EDGE LAMINATING LINE Consisting of: 1. BARGSTEDT PROFI TBH 599/D/30/12 Feeding system without pit, double-sided, longitudinal min. work piece size 950 x 240 x 3 mm max. work piece size 3000 x 1200 x 60 mm max. work piece weight 100 kg max. stack weight 5000 kg transport speed 30 to 100 mpmin 2. FRIZ PROFI FKF 200/1/13/DH/R Homag surface laminating machine for continuously single-sided laminating a top web onto flat core materials, Core materials: chip board (sanded) and MDF boards, Laminating decorative papers from 40 g/scm on rolls EVA hot-melt adhesive, application by slot nozzle max.1300 mm 3. KONTRA Diagonal Saw 4. BARGSTEDT TTF 899/4/25/12 Bargstedt fan turner to turn over work pieces in transport direction around the incoming longitudinal edge 5. HOMAG POWER FPL 620/22/15/PK Double-sided machine for Sizing, Milling/ Profiling, Sanding, Trimming and Edge Sealing 6. HOMAG POWER TRL100/43/13/PK Cel9bjv79p 7. FRIZ PROFI FKP 200/1/13/DH/R Homag Surface and Edge Laminating Machine for continuously laminating the top workpiece surface and wrapping the profiled longitudinal edges. 8. KONTRA Diagonal Saw 9. BARGSTEDT PROFI TSP 420/40/30/12 GR Stacking system, without pit, double-sided, longitudinal Capacity up to 16 cycles/min

Condition: ready for operation (used), Year of construction: 1993, Production line (pallet supports) with machinery (briquetting machine, wrapping machine, multi-saws), sawdust yard, truck scale, office building, warehouses and land. Possibility to erect a photovoltaic installation and expand the production hall. Bxhvkjib The total area is 6.72 ha. (28,278 m2 agricultural area + 3.89 ha industrial area; offices + halls + sheds: 5,511.17 m2).

Condition: excellent (used), Year of construction: 2019, We sell our complete briquette production. Ruf briquette press RB1500 Bj.2019 with only 1300 operating hours. Lasco hot air furnace LA 750 Bj. 2013 with only just 6000 operating hours, Modesta extraction 45 KW, Nestro vacuum filter house 18.5 KW with discharge and as good as new rotary valve,drum dryer 2021 newly built 5.4 meters diameter 21 meters long, various screw conveyors and storage tanks. If desired, a sawmill property with a large residential house can also be purchased. Bprfcnapdk

Condition: used, Year of construction: 2011, Finger jointing line for cross sections up to 200 cm² (80/240 mm or 100/200 mm), with the following. components: 1. HOWIAL tilt unstacking - SH/4t - 1,75x1,75x6,00m - 4t - short. Length 2,50 m, semi-automatic separation of the package. For tilting the wood pile up to 45°. Electric motor drive. stack dim. max. 1,75 x 1,75 x 6,00 m max. stacking load 4 t shortest wood length 2,5 m 2. HOWIAL - VE 1 lamella separator for crosscut saw. With pneum. controlled tongues, on which the material is marked for defects, deposited on the roller conveyor below. 3. HOWIAL - evaluation roller conveyor RO-1 digital wood moisture measuring, control and recording system for autom. recording and control of wood moisture in cycle measuring method according to electric resistance principle. Ckdrx9ss9x 4. gann DMT-8 dig. Wood moisture measuring, control and recording system for automatic detection and control of wood moisture in the cycle measuring method according to the electrical resistance principle. Plant in large switchboard complete with ink jet printer. 5. HOWIAL - crosscut saw AS-30 B pneum. Under table crosscut, with 2 autom. feed units, autom. crosscut. Special photocell control for detection of fluorescent line markings. Automatic waste disposal possible. Saw motor power 7,5 kW saw blade diameter 700 mm feed drive approx. 2 x 1,5 kW Air pressure 8 bar feed speed max. approx. 60 m/min. 6. HOWIAL - conveyor belt cut off waste, with studded belt and guide plates belt width 350 mm belt 2000 mm long belt speed 0,4 m/sec. 7. HOWIAL - double roller conveyor RO-2 6,00 m long incl. transversal transport, drive by round belt, all rollers driven. Cross transport chain conveyor. Ejection ± moisture right Transport speed adjustable 100 m/min. length approx. 6,00 m Width of rollers approx. 400 mm Diameter 112 mm 8. compact finger jointing machine Cook Bolinder The technical data are original from Cook Bolinder: wood width from 75 to 245 mm Timber thickness from 20 to 105 mm Input lengths from 1m to 6 m Cross sections from 30 cm² to 200 cm² Pressing force 5 - 22 to Spindle diameter 50 mm tine profile 15/15 spindle speed approx. 6000 upm Total electrical connected load approx. 62 kW Machine weight approx. 9 to. Gluing OEST comb system for PU Modern Telemechanique SPS control. 9. HOWIAL - Roller conveyor with destacking system Driven roller conveyor with autom. ejector and hydr. driven destacking arms. Technical data: H: 920 mm L: approx. 12.000 mm 10. safety fences incl. circuit breaker 11. finger joint testing machine BSPLT-100 Testing machine for finger joint bending test according to DIN 1052-1/A1 and EN 385 Support distances freely adjustable, attached dimension scale, autom. calculation of support distances in the software. Fully automatic test procedure by mouse click on PC (not included). Alternatively, the test procedure can be started by key operation on the front panel. Connection of any commercially available PC or laptop (Win 2000/XP) via the supplied RS232 serial cable. Fully automatic measured value logging as well as automatic logging in MS-Excel with graphical display. Representation max. wood width: 300 mm max. wood thickness: 140 mm max. compression force: < 100 kN max. support length: 2100 mm Measuring accuracy WITHOUT DISMANTLING

Condition: not inspected (used), consisting of: - Upsetting device SAMCO type RP for upsetting the slat ends - Slat grooving machine. MUNZ, year 1984 for milling of grooves for shutters, working on both sides - frame press ITALPRESSE type Program 30 length of folding shutters max. 3000 mm width max. 700 mm Cjqqpahz9k vertical pressure adjustable up to 8000 kg Horizontal pressure 2500 kg

Condition: reconditioned (used), Year of construction: 2009, Complete plant for the production of wood wool/wood shavings out of logs with a lngth up to 3,0 m. Total capacity about 4 to/h. Complete control system including knife grinding machine, several planer heads, conveyor system for wool transport. Exhausting system. very good condition. B7ql3cq3

Condition: like new (used), Year of construction: 1995, Woodworking machinery used for production of wooden frames for upholstered furniture an coffee tables. Cijtj3uefi List includes: Crosscut saw, formatting saw, bandsaw, planer, thinner, contact grinder, surface grinder, edge grinder, table milling machines, CNC Cosmec, CNC Exakta, Tennoning machine, Mortising macine, 4-sida planner/profiler and more. Complete manufacturing documentation, machining templates and some semi-finished products.

Condition: as good as new (ex-display), Year of construction: 2019, machine/vehicle number: 318203002, We are selling Cefla Finishing Performa multiple line spray machine This machine contains several sections : 1. Cefla Peroforma 28c belt - Linear spraying machine for painting mouldings and narrow boards 2. Cefla Lt belt 1500 - Painted profiles transporter 3. Cefla Cross oven - Transversal cross oven for mouldings 4. Cefla TLF Pro UV Oven - UV-R is a UV radiation curing oven which combines all parts of the process in a single module: conveyor, UV unit and control panel. Available in a large number of configurations for all curing requirements, for both roller and spray painting lines. 5. Dalso automation technology - Automatic profile transporter exhibitor B8v9har7j9 6. Cefla GPA/30/ Generator for fresh air intake This is latest and most advanced machinery from Cefla spray series. Currently this machine as new cost around 400.000 euros + 6 months waiting for delivery. Buying this machine you will reduce cost and automate your process increasing speed drastically.