Used Wood shredder for sale (362)

Condition: good (used), Year of construction: 2016, Operating hours: 4,550 h, Machine/vehicle number: 1530216004, Compacto Shark - Model 153 Single Shaft Shredder, ideal for wood shredding, but could also be used for plastics, copper cable, cardboard, paper etc. The machine was supplied new in 2016 via BF Engineering (UK Agent), costing over £70,000. Fitted with a 75kW drive motor and Bonfiglioli main gearbox, it is in good used condition having occasional use producing biomass boiler feed from waste timber. Recorded hours on the control panel currently showing 4,550. The machine is offered for sale on an ex-site basis in the south of the UK and is available immediately. Can be seen running and tested on request. Finance possible subject to status through our partner company. Sale is to upgrade to a larger Genox machine. Urmqcnjobx Model: Shark 153 Hopper Opening: 1,530mm x 1,235mm Hopper Volume: 2.5m3 Motor Power: 75kW Dimensions: 2,450mm x 2,100mm x 1,750mm Weight: Approx. 4,000kg

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, Machine/vehicle number: 18-16-128, Power: 55 kW (74.78 HP), Number of blades: 82, Rotor diameter: 368 mm, Rotor speed: 100 rpm, Rotor width: 1,500 mm, USED VOTECS EZ15/55KW SINGLE-SHAFT SHREDDER CONDITION Excellent pre-owned condition. Benefitting from a full and comprehensive service including: • ROTOR: rebuild, with new knife holders (where necessary) and all new knives/fixings. • DRIVE: overhauled, with new fluids and seals (gearbox and hydro-dynamic clutch). • TRANSMISSION: replacement, with new drive belts. • BEARINGS: serviced. • HYDRAULICS: overhauled, with new filters, seals, fluids and gauges (valves, solenoids and cylinders fully tested). • CONTROLS: checked, tested and serviced, to ensure fully functional fail-safe control. TECHNICAL Machine Model: EZ15/55kW Standard Hopper Volume: ~ 2.3 m³ Feed Opening: 1,500 x 1,500 mm Operating Width: 1,500 mm Rotor Diameter: 368 mm Rotor Speed: ~100 rpm Main Motor: 55 kW No. of Knives: Triple-row, totalling 123 pieces for knife dimensions, 40mm² octagonal quad tip Screen Perforation: 15/20mm Suction Port Diameter: 250mm Cccojso Suction Velocity: 28 m/sec (recommended) Colour: WEIMA Standard RAL 2002 / 7016 Connected Load: 400 V +/- 5 % / 50 Hz Weight: ~ 4200 kg DESCRIPTION The EZ15 is capable of shredding all types of timber such as hardwoods, softwoods, MDF-board, particle board and veneer into a desired shred size of 12-15mm, dependant on the motor power and screen size used. FUNCTION The shredder is manufactured with a heavy-duty reinforced plate steel filling hopper. The hopper is gravity fed which ensures a continuous supply of the material being shredded without any manual assistance. The material can be loaded by forklift tilt type bins, conveyor belt or by hand. The filling hopper can be adapted to suit the customer’s individual requirements, including extending the height or with a winged hopper extension and fitting a manually or hydraulically operated hinged or sliding top lid, complete with safety interlock system. The hydraulically controlled ram feeds the material automatically into the rotor using load-related controls. The smart ram system is load related on the control cabinet by key switch. The internal ram guides are made of extremely non-abrasive plastic (Polyamide) and can be adjusted. The hydraulic cylinders are mounted on universal joints in order to avoid lateral forces on the piston cups. The patented V: Rotor is made of solid steel and has a diameter of 368mm. It operates at ~ 100 rpm. The tough concave four-way rotating knives are mounted onto special holders located in small pockets. This unique system allows a reduced cutting gap between the counter knife and the rotor, ensuring maximum throughput and lower power consumption. The screen mounted beneath the rotor determines the size of the required fraction (stepped 15/20mm). Power is transmitted from the electromotors by belts via a high-dimension gearbox, which is located on the shaft end on one side of the rotor. INCLUDES • Electrical control system (PLC on request). • Control cabinet (Rittal/Sarell). • Star-Delta starter. • Anti-vibration foundation. • V: Rotor (patented) with knife pockets cut in the mounting section. • Concave ground reversible cutting knives (40 x 40mm). • Safety package “reverse counter”. • RAM comb facility. • Winged hopper extension. • RAM pulse function. • Fast RAM function.

Condition: good (used), Year of construction: 1997, Operating hours: 1,929 h, Single-shaft shredder Reinbold AZR 600, year of manufacture 1997, for waste wood etc. Technical data: Manufacturer: Reinbold Type: AZR 600 Year of construction: 1997 Motor: 11 kW Total connection: 12,1 kW Filling opening: 570 x 1184 mm Hopper capacity: 0.6 cbm Throughput: 2-4 hopper fillings per hour Rotor diameter: 250 mm Rotor speed: 63 rpm Number of knives: 28 Sieve hole: 15 mm Dimensions: approx. 2151 x 1175 x 1825 mm Weight: approx. 1150 kg Materials: Packaging material, pallets, plywood, chipboard, cardboard The operating instructions and CE declaration are available in German. Remark: The machine is in good condition. Viewings, also under power, are possible at any time by arrangement. On request, we can also carry out tests with your material for a fee. We will be happy to answer any questions you may have about the machine by telephone from Monday to Thursday from 08.00 to 14.00 hours. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and revocable at any time. Viewings are possible by arrangement. E2Pqcti The sale against prepayment is ex works, without warranty and guarantee.

Condition: good (used), Hydraulic press TCS - 150T MACH-ID 8821 Manufacturer: TCS Type: 150T Control system: Siemens SIMATIC OP7 Year of manufacture: 1999 Table load sliding table 20000 Kg Table load upper table 9000 kg Table out feed stroke 2100 mm Column diamater 180 mm Closing force 1500 Kn Opening force 700 Kn Laser safe CE Safety Power 15 kW Specifications Metric US Standard Distance between uprights 2000 mm Installation height 2000 mm Table length 1500 x 2000 mm ram stroke 1800 mm Starting speed 50 mm/min. Working speed 8 mm/min. Return speed 50 mm/min. Table rotation 0 - 270 rpm Table rotation 0 - 180 ° Dimensions (estimation) length 4800 mm width D7Vxnfk 5600 mm height 5200 mm Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, SMART 600 S Year of manufacture end of 2019 Commissioning 2020 Very few operating hours!!! Rrlou83Snf Inlet hopper (mm) 580 x 840 Rotor diameter (mm) 250 Rotor width (mm) 600 Rotor speed (rpm) 80 - 100 - 120 Drive (kW) 22 Rotor blades (pcs) 26 Hydraulics (kW) 0.75 Screen perforation (mm) 30 Suction nozzle Ø (mm) 150 Weight approx. (kg) 1400 Machine dimensions: Length (approx. mm) 1671 Height (approx. mm) 1692 Width (approx. mm) 1285 Hopper (approx. mm) 840 x 580 The throughput capacity depends on the feed material and the screen perforation. List new price - 19.780,00€ net Can be tested under power at our premises. Forklift available for loading

Condition: repair required (used), Shredder Hammel NZS 700 E 250 kW The machine needs repair. Ugad7Kxpzh The electric cabinet is missing.

Condition: excellent (used), Year of construction: 1992, Functionality: fully functional, Complete Klöckner CBK chipper system from small business Consisting of: Stable 23 m long vibrating chute, with reinforced eccentric drive and suspension, as well as screening zone, Metal detector with metal-free zone in the vibrating chute Ul0Vwhfhml Drum chipper type KTH 120 x 400 L 2 WV. Inlet 120 x 400 mm. Chipping width 430 mm. Chipping rotor with 2 knives. 2 feed gears. Hydraulic lifting and damping of the upper roller rocker. Drive motor 22 KW ( also more possible ) Scraper conveyor KKF ascending to the scraper conveyor. 5 m straight, then curve, 10.5 m ascending with ejection. Scraper conveyor approx. 7 m long. Complete with electrical control cabinet and accessories. Dismantled and loaded free on truck.

Condition: used, Year of construction: 2016, Anzahl Messer Z = : 28 Stk Wellenanzahl : 1 Stk Wellendurchmesser : 252 mm Wellenbauform : V- Rotor Drehzahl Motor : 60-100 U/min Iswhe8U Trichterlänge : 1050 mm, Logspacer, freischneidender Trichter Trichterbreite : 600 mm Trichterhöhe : 1050 mm Schublade : vierseitig segmentiert Steuerungsart : Siemens SPS Steuerung und 5 m Kabel Motorenart : Langsamläufer Gewicht ca. : 1300 kg Motorleistung : 18,5 kW Absaugdurchmesser : 160 mm Zusatzausstattungen: Schnelle Hydraulilk rückwärts mit Schockventil

Condition: good (used), Year of construction: 2018, Operating hours: 1,011 h, GROSS single-shaft shredder, type GAZ 82 S, year of construction 2018 Technical data: Manufacturer: GROSS Apparatebau Type: GAZ 82 S Year of construction: 2018 Operating hours: 1011 Drive: 37 kW Filling opening: 800 x 1200 mm Hopper capacity 1 m³ Rotor diameter: 368 mm Rotor length: 800 mm Rotor speed: 60-120 rpm Suction nozzle diameter: 200 mm Dimensions: approx. 2100 x 1700 x 1750 mm (LxWxH) Weight: approx. 2500 kg Material: wood, cardboard, plastic Accessories: Funnel The shredder is in good condition. Inspections, also under power, are possible at any time by arrangement. On request, we can also carry out tests with your material for an expense allowance. We will be happy to answer any questions you may have about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: Ulzhedoj3X All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale against prepayment is ex works, without warranty and guarantee.

Condition: used, 0 800x600 mm Motor output 18,5 kW 0 0,6 m³ Diameter of the motor 252 mm Dimensions (L/W/H) 1700x1130x1595 mm Weight 1300 kg Number of working hours 1741 h WEIMA shredder WL 4, machine will be checked by us ----- The Weima high-performance shredders with their flexible application options Can be used with all types of wood materials (hardwood, softwood, chipboard, MDF Materials, plywood, veneer scraps, etc.) into fuel chips and achieve an enormous volume reduction with bulky materials materials. Functionality : The machine is equipped with a large filling hopper and can be used using a conveyor belt or can be fed by hand. This funnel can do that can be adapted to individual needs and guarantees continuous and cost-effective material feeding without requiring manual assistance must be taken. The hydraulically controlled pusher guides the wood waste to be shredded Cutting area of the rotor and becomes automatic and load-dependent controlled. The internal slide guides are made of highly abrasion-resistant Plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended on gimbals to exert lateral forces on the piston sleeves avoid. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and works with a rotor speed of 80 - 120 rpm. The concave ground, aggressive and 4-way rotating knives/cutting turning crowns are located in milled knife pockets on special knife carriers. This patented system guarantees that this is possible for the first time Reduction of the cutting gap between counter knife and rotor, high Throughput performance, low energy consumption and optimal discharge of the shredded material. The sieve mounted under the rotor determines the chip size (10 - 100 mm). A sieve basket that can be opened hydraulically is also available upon request. The power is transmitted from the electric motors via V-belts heavily dimensioned gearbox, which is located on one side of the rotor Shaft stub is attached. Technical data WL 4 / 18.5 kW ----- Feed opening: 600 x 800 mm Standard funnel content: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Paint finish: Weima standard RAL 2002/7016 Dpr89H Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,300 k included: Electrical control (Moeller/Siemens/Allen-Bradley) Control cabinet (Rittal / Sarell) concavely ground cutting turning crowns (40 x 40 mm) Sern triangle approach Vibration-damping foundation V-rotor (patented) with knife pockets milled into the profile (technical information according to the manufacturer - no guarantee!)

Condition: good (used), Year of construction: 2011, Power: 18.5 kW (25.15 HP), Empty load weight: 1,300 kg, Weima WL4 Year 2011 V-rotor Number of blades 28 Motor power 18,5kW Rotor length 600mm Iswgrkq Length 2045mm Width 1190mm height 1640mm Weight 1300kg

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm AVAILABLE AND READY TO WORK Ugac9Rb7I7

Condition: good (used), Year of construction: 1999, Functionality: fully functional, Machine/vehicle number: Kom.-Nr. 2739, Power: 55 kW (74.78 HP), Chipper Rudnik & Enners consisting of: Chipper RE-TH 250/650/5, year 1999, No. 2739 Infeed width 700 mm, infeed height 250 mm, rotor-Ø 800 mm, 5 feed rollers 3 at the bottom, 2 at the top Clvdn9Ji3O MESUTRONIC electronic metal detector R&E vibro chute VR 560/763x15,000 mm long R&E trough chain conveyor KF 50/60x23,000 mm with new spare and counter blades, V-belt

Condition: used, Year of construction: 1989, Operating hours: 4,501 h, Functionality: fully functional, Machine/vehicle number: 89 A-2650, Power: 15 kW (20.39 HP), Overall weight: 2,000 kg, Color: green, ZENO shredder ZTLL used, functional Year of manufacture 1989, only 4501 operating hours, can be installed at floor level, hopper flap, replacement teeth, V-belt as good as new TECHNICAL DATA Inlet cross-section L 1000 / W 800 mm, hopper volume 0.8 m³ Suction nozzle 200 mm Chipping capacity 1.5 rm/h with 20 single teeth double cutting edge, chipping length 0-10 mm Motor power main drive 15 kW, 1500 rpm, B3 Hydraulic motor power 0.75 kW, 1500 rpm, B5 Rotor speed 110 rpm, rotor diameter 300 mm External dimensions W ~1350 / H ~1830 (incl. wooden beam H 175 mm) / D ~1750 mm Weight 2000 kg Rvwmtcok

Condition: like new (used), Year of construction: 2021, Operating hours: 650 h, Functionality: fully functional, First registration: 09/2024, Overall weight: 1,430 kg, Fuel type: diesel, Color: yellow, Chopper vandaele tv1823d 611 hours Year of construction 2021 Uchj93Tnyb In perfect condition 22500 euro ex vat

Condition: new, Technical specification: Ztgueze3 Hopper opening: 600 x 800 mm Hopper capacity: 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 260 mm Drive power: 15 kW Rotor speed: 90 rpm. Number of knives: 14 pieces 2 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns concave / 30 x 30 mm, broaching knives Screen perforation: 15/20 mm Paint finish: frame in RAL 5010, hopper in RAL 7016 (HoKuTech standard paint finish) Connected load: 400 V /- 5 % / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (PLC Siemens) Star-delta start Rubber oscillating elements E-rotor with knife pockets milled into the profile Gear limit switch 1. Knife row Hold-down device on pusher for long and large parts Large 40 x 40 mm knives for optimum material feed Very robust gearbox Special broaching knives to prevent lateral jamming Machine number: 510-5238

Condition: good (used), Four-shaft chipper UNTHA RS30 4S Few operating hours Blades in very good condition !!!, will be re-sharpened by us on request. Drive power : 2 x 7,5 kW Operating voltage : 400 V; 50 Hz Cutting unit opening : 460 x 570 mm Number of cutting shafts : 4 Rotation main shaft : approx. 23 rpm / 4,600 Nm Secondary shaft rotation : approx. 35 rpm / 3,100 Nm Hole sieve Ø : 15 Chopping capacity with sieve hole diameter: Fzje3Tg 15-20 mm : 350-550 kg/h 25-30 mm : 550-850 Kg/h 35-40 mm : 850-1250 Kg/h without sieve over 1250 Kg/h Suction nozzle 200 mm Overall dimensions : Length x width x height: 1,300 x 1,000 x 1,970 mm Weight: approx. 1,300 kg

Condition: good (used), Year of construction: 2007, - Hammel NZ 700 E - Year of manufacture 2007 Hu3Ocrc - electric drive 250 kW - with magnet - with metal detector and outlet - with infeed conveyor and outlet conveyor - good condition

Condition: excellent (used), Year of construction: 2018, Weima shredder WLK 800/37 kW Year 2018 Technical specification: Hopper clearance: 800 x 1,450 mm Cutting chamber dimensions: 720 x 700 mm Hopper capacity: approx. 0.8 m3 Working width of the rotor: 800 mm Rotor diameter: 260 mm Pusher path with segment floor: 700 mm Drive power: 37 kW Rotor speed: 100 rpm Number of blades (2-row): 42 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 40 mm with secondary crusher bars Paint finish: Weima standard RAL 2002 / 7016 Connected load: 400 V +/- 5 % / 50 Hz including: V-rotor with knife pockets milled into the profile Two rows of blades on V-rotor Welded blade carriers and screwed blades with countersunk blade screws Super Cut (adjustable counter blade) for regulating the cutting gap Bwu3Vxmi0U Reversible counter blade K-bearing, offset, closed, low-maintenance self-aligning ball bearings Fast hydraulics for pusher backwards with various adjustment options Shock valve sits directly on the slider cylinder Slide chamber unpainted Switch cabinet (Rittal) with 5 m cable SPS control / Siemens Cardanically suspended pusher cylinder with load-dependent controlled drawer Machine frame on rubber suspension elements Segmented floor on 2 sides Safety package Gear limit switch and reversing counter Electromechanical drive with Weima WAP gearbox Manually swiveling screen basket Quick access screen (door) Gearbox oil cooling prepared Hydraulics fast forward Heavy duty" feed hopper Hydraulic oil preheating Hydraulic oil cooling Plug for conveyor belt + electrical integration Conveyor belt cut-out 600 mm Imro Maschinenbau Used discharge conveyor belt with 1.1 kW Type: 500 x 1200 / 4900 Year 2015 Machine number: 510-2770 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, voltage: 400 V / 50 Hz Feed opening: 600 x 800 mm Hopper capacity: 0.6 m³ Bixy2Spg Throughput capacity: depending on material and sieve Rotor diameter: 252 mm Rotor length: 600 mm Rotor speed: 60 - 100 rpm Engine power: 18.5 kW Cutting system: 28 knives 40x40 mm (incl. 2nd row of knives) Sieve perforation: 25/30 mm Suction nozzle: 160 mm Dimensions: L = 1,800 mm, W =1,230 mm H = 1,640 mm Weight: approx. 1.300 kg incl.: - autom. star-delta start-up - Control cabinet electronic, completely wired - automatic stop at idle - CE-conform - GS-sign "dust-tested - vibration-damping machine feet - 2nd measuring row = 14 knives 40x40mm - bar magnet length 590mm  

Condition: excellent (used), Year of construction: 2018, Weima shredder WLK 800/37 kW Technical specification: Hopper clearance: 800 x 1,450 mm Cutting chamber dimensions: 720 x 700 mm Hopper capacity: approx. 0.8 m3 Working width of the rotor: 800 mm Rotor diameter: 260 mm Pusher path with segment floor: 700 mm Drive power: 37 kW Rotor speed: 100 rpm Number of blades (2-row): 42 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 40 mm with secondary crusher bars Paint finish: Weima standard RAL 2002 / 7016 Connected load: 400 V +/- 5 % / 50 Hz including: V-rotor with knife pockets milled into the profile Two rows of blades on V-rotor Welded blade carriers and screwed blades with countersunk blade screws Super Cut (adjustable counter blade) for regulating the cutting gap Reversible counter blade K-bearing, offset, closed, low-maintenance self-aligning ball bearings Fast hydraulics for pusher backwards with various adjustment options Shock valve sits directly on the slider cylinder Slide chamber unpainted Switch cabinet (Rittal) with 5 m cable SPS control / Siemens Cardanically suspended pusher cylinder with load-dependent controlled drawer Machine frame on rubber suspension elements Segmented floor on 2 sides Dpfm0F Safety package Gear limit switch and reversing counter Electromechanical drive with Weima WAP gearbox Manually swiveling screen basket Quick access screen (door) Gearbox oil cooling prepared Hydraulics fast forward Heavy duty" feed hopper Hydraulic oil preheating Hydraulic oil cooling Plug for conveyor belt + electrical integration Conveyor belt cut-out 600 mm Imro Maschinenbau Used discharge conveyor belt with 1.1 kW Type: 500 x 1200 / 4900 Year 2015 Machine number: 510-2770 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Voltage: 400 V / 50 Hz Feed opening: 600 x 800 mm 7Fijeub Hopper capacity: 0.6 m³ Throughput: material and sieve-dependent Rotor diameter: 252 mm Rotor length: 600 mm Rotor speed: 60 - 100 rpm Motor power: 18.5 kW Cutting system: 28 knives 40x40 mm (incl. 2nd row of knives) Sieve perforation: 20/25 mm Suction nozzle: 160 mm Dimensions: L = 1.800 mm, W =1,230 mm H = 1,640 mm Weight: approx. 1,300 kg incl.: - automatic star-delta start - electronic control cabinet, fully wired - automatic stop at idle - CE-compliant - GS mark "dust-tested" - vibration-damping machine feet - 2nd row of knives = 14 knives 40x40mm

Condition: used, Year of construction: 1981, used make Weima type R 500 year of construction 1981 machine no. 450008 motor 30 kW hopper opening 500 mm x 300 mm rotor width 500 mm sieve hole size 25 mm Ccc9Zexlfs space requirement approx. 2000 mm x 1000 mm x 2000 mm weight approx. 1000 kg total connected load approx. 30 kW storage location 97447 Gerolzhofen, free loaded, unpacked handover in actual condition as inspected, without guarantee and warranty

Condition: used, Year of construction: 2017, Operating hours: 1,345 h, used, top condition, low mileage make Gross type GAZ 62 year of manufacture 12/2017 machine . 01117144 Cg2Nf0Gw0 hours 1345 CE type-tested GS wood dust tested motor 18.50 kW slow speed with hydraulic push floor hopper opening 600 mm x 800 mm cutting unit width 600 mm rotor width 600 mm automatic switch-off vibration damper number of knives 2 x 14 pieces suction connection D 160 mm space requirement approx. 1800 mm x 1250 mm x 1700 mm weight approx. 1600 kg storage location 97447 Gerolzhofen, free loaded, unpacked delivery as seen without guarantee and warranty

Condition: new, Available from around December 2022belongs to shredder type GAZ 62V 18,5 kWLength 590mm Ce7E7Pvmqs