Used cutting machines for sale (120)

Condition: used, machine/vehicle number: 008158, Max. panel width: 4300 mm Itolhcdjw Tiv Howwjb Max. panel length: 2200 mm Main saw blade projection: 120 mm No of Grippers: 9 Second flexible pusher: yes Panel Rotation Station: yes Thin sheet loading: yes

Condition: used, machine/vehicle number: 008177, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 125 mm Iolhcdwox A Tamewetb No of Grippers: 7

Condition: used, machine/vehicle number: 008357, Max. panel width: 4400 mm Max. panel length: 4300 mm Ieljx A Tk Eshcdwwjtb Main saw blade projection: 75 mm No of Grippers: 9

Condition: used, machine/vehicle number: 008384, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 95 mm No of Grippers: 9 Iolhcdjx Swcmowwotb

Condition: used, machine/vehicle number: 008392, Max. panel width: 4500 mm Max. panel length: 2200 mm Itslhjx Swb Njcdwwob Main saw blade projection: 127 mm No of Grippers: 7 Panel Rotation Station: yes Thin sheet loading: yes

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: ZH-3316, overall weight: 3,000 kg, table length: 2,680 mm, table width: 1,450 mm, Purchased new in 2021. Very good overall condition. Ideal for cutting veneer, cardboard, paper, etc., and suitable for high production volumes. All essential settings for cut quality and precision are conveniently located on the front of the machine. Highly precise motorized rear stops, controlled via the digital display on the control console. Cutting parameters are adjusted on the console and can be fine-tuned using a handwheel, allowing for quick and accurate setup. Photoelectric safety: safety sensor protects the operator during blade operation. Emergency stop with access at the front of the machine. Cutting line illumination. Stroke counter. Technical specifications: • Maximum cutting length (mm): 2680 • Maximum cutting width (mm): 1450 • Maximum cutting thickness for wet veneer (mm): 60 • Maximum cutting thickness for dry veneer (mm): 30 • Blade size (mm): 2680*140*12.7 • Motor power (kW): 4.37 Ijlhcdjxzrfxswwetb • Machine dimensions (mm/inch): 4200*2300*1700 • Weight (kg): 25 • 380V 3PHASE 50HZ Extras: Sold with new spare blade and a new Teflon plate.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 32664, collet bore: 40 mm, saw blade diameter: 220 mm, main saw diameter: 220 mm, overall weight: 1,200 kg, table length: 5,000 mm, positioning accuracy: 0.1 mm, table width: 250 mm, working range: 250 mm, pressure: 6 bar, type of input current: three-phase, total width: 250 mm, cutting width (max.): 250 mm, compressed air connection: 6 bar, cutting diameter: 220 mm, extraction nozzle diameter: 120 mm, working height: 30 mm, Friulmac Randomat E 001 Serial No: 32644 Year 2001 in excellent condition specially made for End Matching all types of wood flooring. Fitted with a Sound & Safety Enclosure with front sliding doors and an entrance door at each end. 2 x 4kw motors do the cutting of the tongue & groove. Will machine random or fixed lengths from 250m/m up to 6m. long. 6m. Long Infeed Belt Conveyor, and a 6m. Long Outfeed Belt Conveyor. Siemens Simatic OP7 Control System. Complete with documentation for Operating and Programming. Itjlhox Ec Hnjcdwwjb

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, overall weight: 10,200 kg, positioning accuracy: 0.1 mm, type of input current: three-phase, total height: 2,300 mm, total length: 6,000 mm, total width: 2,000 mm, cutting width (max.): 450 mm, machine base height: 850 mm, working height: 850 mm, Double blade guillotine, electric movement of the movable blade via ball screw, lower rear movable blade, electric rear stop, 2 lasers, 10° cutting angle for improved cutting quality and better veneer penetration, weight: 10,200 kg, new PLC. Itjlhcdswy Irbswwob

Condition: good (used), Morsoe miter punch, machine number 48706, in good condition, available immediately. If you are interested, we will also inform you about other machines in our house. You are welcome to visit the machine in our house by appointment. Itelhceh Aka Iodwwjb

Condition: good (used), Year of construction: 1991, machine/vehicle number: 1313, Intended Use The automatic high-performance longitudinal circular saw KMS is designed for precise finish and joining cuts. It features a robust, durable construction and is engineered for continuous industrial operation in wood, plastic, or metal processing applications. Machine Design - Sturdy, welded heavy-duty steel construction. - Motor protection switch with automatic star-delta start-up. - Carriage guidance via precision-ground round steel rails and ball-bearing rollers; rails are mounted on easily replaceable supports. - The entire carriage unit is positioned beneath the front machine table. Sawing Unit - Lowerable circular saw unit, electro-pneumatically lifted. - Cutting height adjustment manually via a threaded spindle. - Infinitely variable feed rate from 1–60 m/min, powered by a frequency-controlled motor. - Return speed constant at 60 m/min, independent of feed rate. - Cutting length adjustment for varying cut lengths via selector switch. Machine Table - Front machine table made from reinforced longitudinal beams, adjustable and mounted for stability. - Table surface constructed from profiled steel sheets with recessed grip handles. Ijlhcdjrt H Ddswwjtb - Cantilevered width stop, seated and guided on three sides. - Spindle drive with fine adjustment via handwheel, directly readable scale. - Usable width: 400 mm (standard version). - Electro-pneumatically controlled fence rail with automatic retraction for unobstructed drop of cut material. - Rear machine table is narrow and can be swiveled downward electro-pneumatically for free fall during longitudinal cuts. Saw Blade and Extraction - Designed for saw blades Ø 400 mm, bore Ø 30 mm, mounting flange Ø 80 mm. - Maximum cutting height: 70 mm. - Integrated extraction duct, Ø 150 mm. Double Circular Saw Unit “DUO” - For pre- and post-cuts, consisting of two saw blades Ø 400 mm and two 11 kW (15 HP) motors each. - Total cutting length: 3200 mm. - Pressure beam with torsion-resistant construction and parallel guidance, stroke movement electro-pneumatically controlled. - Integrated finger safety contact bar.

Condition: used, machine/vehicle number: 006645, Max. panel width: 5600 mm Max. panel length: 2850 mm Main saw blade projection: 125 mm Itolhsv Ir Scscdwweb No of Grippers: 11

Condition: excellent (used), Year of construction: 1989, HYDRAULIC VENEER CUTTER Brand : TORWEGGE Model : 3200 Hydro Year : 80'S Machine brought up to standard (DEKRA inspection 03/2023), functional, offered as is, without overhaul. A video of our tests July 2024 MACHINING CAPACITIES : - Cutting length: 3200 mm - Max. cutting width: 60 cm - Passage height 100 mm - 50-70 kP/cm² pressure COMPOSITION : - Robust welded steel-mechanical frame - Ground cast-iron support table Front clearance 40cm Floor height (working height): 0.9-1m depending on installation Front lighting - Control panel mounted on articulated bracket - Rear table with 2 auxiliary extensions (PxL) 1x1.35m Electrically controlled pusher guide Working length 2.12m Distance between supports 30cm Manual precision adjustment Dimension indicator on ruler 2 flow recovery ejectors ELECTRICAL CHARACTERISTICS : - Power supply : 400v.Triphasé+N 50Hz - Installed power: 15 kW approx. (2 motors, hydraulic pump and pusher) Machine supplied with electrical diagrams 2 boxes with knives OPERATOR SAFETY : - Lockable disconnect switch - Mushroom-type stops - Two-hand safety control device - Frontal light curtain - Key lock for blade change - Safety contacts on removable housings - Ejectors at end of cycle to advance workpiece onto table Dimensions for transport (WxDxH): - Main frame: 4800 x 1300 x h.1750 mm. Estimated weight: 3000 Kg Itolhcdjrx S Ucowwjb - Rear guide, on pallet: 2.20 x 1.20 x h1.00mm Estimated weight: 300 kgs Functional machine offered without overhaul.

Condition: used, machine/vehicle number: 008206, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 125 mm No of Grippers: 9 Itslex A Tizehcdwwjb

Condition: used, machine/vehicle number: 008236, Max. panel width: 3200 mm Itolex A Hc Uehcdwwjb Max. panel length: 3200 mm Main saw blade projection: 65 mm No of Grippers: 7

Condition: used, machine/vehicle number: 008113, Max. panel width: 3800 mm Ielhcow Iddhjdwwjtb Max. panel length: 3200 mm Main saw blade projection: 75 mm No of Grippers: 7

Condition: used, machine/vehicle number: 007569, Max. panel width: 2200 mm Ijlhcdwovrrldswjtb Max. panel length: 4500 mm Main saw blade projection: 152 mm No of Grippers: 11 Thin sheet loading: yes

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains Islhcdwexvc N Dowetb 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130 Itolhexvc Rzecdwwjb

Condition: used, Year of construction: 2021, YEAR OF MANUFACTURE 2021 MAIN ENGINE 60 HP (45 kW) Itelhcdsyaplbswwob CUTTING HEIGHT 120 mm CUTTING WIDTH 400 mm

Condition: used, machine/vehicle number: 007504, Position 1: Vertical Storage Systems IMA + SCHELLING-AH 6 Position 2: Angular Beam Panel Saws IMA + SCHELLING-AH 6 Itolhcewuucisdwwsb Position 3: Panel Feeding and Loading IMA + SCHELLING-AH 6

Condition: new, Year of construction: 2025, The most appreciated solution. Itslhcouii Rgodwwjb The Legend_500 has a completely painted, thick and reinforced steel structure. The blade with a diameter of 500 mm, the power of 5.5 kW and the rotation speed of 2800 rpm make it the ideal machine for those who work with wood up to a maximum of 125 mm thick and 310 mm wide (optional up to 375 mm).

Condition: used, machine/vehicle number: 006211, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 135 mm Itolhcdsiwbfujwweb No of Grippers: 10 Second flexible pusher: yes Panel Rotation Station: yes

Condition: new, Year of construction: 2024, Automatic length measuring and positioning system for all STROMAB crosscut saws, as well as similar machines from other manufacturers. It serves both as a stop and for workpiece positioning. Consists of: Aluminium profile 105 x 90 mm, anodized Toothed belt drive 32 mm, reinforced with steel wire Itjlsxraucehcdwwob Stepper motor 6 Nm, multi-voltage 115 - 230 V, 50/60 Hz Repeatability +/- 0.1 mm Positioning speed 60 m/min SMART 7 Control Unit with 7-inch touch screen Absolute and incremental processing mode 8 pre-set standard values 2 software versions with different optimization levels available optionally. ZM 415 – Usable working length 4,500 mm ZA333 – Roller table 4,500 x 280 mm, RD 32 mm ZA341 – Front support 4,500 x 260 mm ZA373 – Locking cable for customer’s own crosscut saw

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, workpiece length (max.): 2,600 mm, workpiece height (max.): 45 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. machining length: 2,600 mm Max. machining height: 45 mm MACHINE DETAILS Installed total power: 6.5 kW Itjlhcdwoxxapgewsb

Condition: used, machine/vehicle number: 007618, Max. panel width: 4400 mm Max. panel length: 4400 mm Itolhou N Slijcdwwob Main saw blade projection: 75 mm No of Grippers: 7