Used Combined machines for sale (108)

Condition: excellent (used), Year of construction: 2022, HOLZKRAFT CU 410c F 26 N Tersa 4-way combi Year 2022 - little run - -- Technical data -- - circular saw - saw blade length 2.600 mm max. saw blade Ø 315 mm max. cutting height at 90°/45° 100 / 79 mm max. clearance width to the left of the saw blade 2,310 mm Cutting width at rip fence 900 mm Saw blade inclination 90° -45° - Jointer - Working width 410 mm Jointer table length 1,660 mm Planing shaft Ø / number of planing knives 72 mm / 3 pcs. - Thickness - Table dimensions 410 x 605 mm min./max. working height 3 / 230 mm max. chip acceptance 4 mm Feed speed 7 m / min -Table milling machine usable spindle length 100 mm Beizmii max. tenoning tool Ø 275 mm max. tool Ø 210 mm spindle speed 3,500 / 6,000 / 10,000 rpm Spindle Ø 30 mm - General - Motor power Motor power 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Suction nozzle Ø 4 x 120 mm Suction nozzle Ø saw blade guard 60 mm Location: Ex stock 54634 Bitburg

Condition: good (used), Year of construction: 1995,

Condition: used, jointer planer, dresser, flat planer, planer, jointer -Manufacturer: SCM surface planer type F4L -Working width: 400 mm L0Mfs28Qwr -Number of knives: 4 pieces -Chip removal: 0 - 10 mm -Motor: 3 kW -Planer knife speed: 5500 rpm -Table: 2605 x 400 mm -Dimensions: 870/2605/H980 mm -Weight: 695kg

Condition: ready for operation (used), Technical characteristics Router-tenoner equipped with tenoning carriage, work table extension and support bar Working table dimensions : 1100 x 700 mm Cuy8Xeulb2 Max. tool diameter : 300 mm Router spindle diameter : 30, 40 and 50 mm Spindle vertical travel : 220 mm Motor : 7,5 kW Rotation speed: 2900, 4400, 6000 and 8000 rpm Machine with a specific protection housing for both uses (shaping and tenoning) Power and Motors Voltage: 400 V Pluging: Three-phased Power: 7,5 Kw Overall dimensions Weight: 740 Kg

Condition: good (used), Code: 0081 Brand: SCM Model: FS 520 CLASS - CE Standard Combined surface/thicknessing planer - CE Standard With tersa shaft Simultaneous table lifting Motorized lifting of thickness table Electronic digital readout of thickness removal quota Technical data: Max working width mm 520 Total table length mm 2300 N ° 4 knives Motor power Hp 10 Thickness working height mm 250 Dpswkn Thickness feed speed mt/min 5/8/12/18 Exhaust outlet diameter mm 120 Overall dimensions: mm 2300 x 1000 x 1100 h Weight kg 980

Condition: new, - New - Description: - For sawing, milling, surface planing, thickness planing and optional slot drilling - The work tables made of heavily ribbed gray cast iron and the underframe made of welded steel guarantee Torsion resistance and vibration-free work - Unique in this performance class: smoother Aluminum format slide, anodized, with ball contact system - Swiveling saw blade from 90 ° - 45 ° - Table bracket with graduated scale and aluminum crosscut fence for angled cuts on plates and large workpieces - Planing unit with TERSA quick change system with three planer knives - Helical-toothed steel feed roller for constant Workpiece infeed when thicknessing - curved milling protection hood for profiling, with fine adjustment as standard - Milling unit with two speeds - The units are driven by three independent motors - Made in Italy quality Technical specifications: Dimensions and weights Weight (net) approx. 245 kg Dressing Planing table width 300 mm Planing table length 1200 mm Angle of inclination saw / planer fence 90/45 ° Chip removal ssing 3 mm Connection suction Extraction nozzle diameter 4 x 120 mm Suction nozzle diameter of the saw blade guard 60 mm Installation information Required space length 2460 mm Space requirement width / depth 2155 mm Explanation of space requirements: Take the dimensions into account maximum travels or useful lengths. thickness Thickness table length 450 mm Thickness table width 300 mm Working height thickness min. 3 mm Working height thickness max. 200 mm Chip removal max. Thickness 3 mm Daxxd2E Electrical data Connection voltage 400 V Mains frequency 50 Hz Nominal operating mode drive motor S6 Duty cycle of drive motor 40% Drive motor power 3 x 1.8 kW Sliding carriage and table Format sliding carriage length 1140 mm Format sliding carriage width 201 mm Format sliding carriage height 70 mm Table length 1024 mm Table width 224 mm Table height 900 mm Milling spindle Spindle inclination 0 ° Spindle mandrel diameter 30 mm Usable length of the spindle 75 mm Spindle speed (s) 5000 - 7500 min? ¹ Milling tool diameter max. Tool diameter max. 160 mm Tool diameter can be lowered 180 mm Tool diameter max. Tenon milling 275 mm Planer knife shaft Planer shaft type TERSA Plane shaft diameter 62 mm Number of planing knives 3 pcs Circular saw unit Trimming length 1200 mm Cutting width with rip fence 540 mm Max. Cutting width to the left of the saw blade 1200 mm Saw blade inclination 90 - 45 ° Max. Cutting height at 90 ° 67 mm Max. Cutting height at 45 ° 40 mm Max. Saw blade projection 90 ° 75 mm Max. Saw blade projection 45 ° 60 mm Feed Feed speed 6 m / min Scope of delivery: - Tersa quick-change planer knife shaft - anodized aluminum sliding table - Multifunctional stop for parallel cuts and surface planing - Table extension arm with crosscut fence and stop jaw - Eccentric clamping arm Item no .: 5500030

Condition: excellent (used), PART NUMBER 7472 Technical specifications: Milling machine - spindle diameter 30mm - spindle height 140mm - interchangeable spindle, blocked - adjustable up/down - guide - 2 types of rotation speed + right/left - dimensions of table top 960x740mm - diameter of the suction nozzle 120mm Circular saw - max blade diameter 400mm - spindle diameter 30mm - max cutting height 100mm - spindle lock - blade adjustable up/down - blade guard - cutting width at the guide bar 650mm - cast iron table top - 2 types of rotation speed - with side carriage (material pressure + guide) - motor 3kW Drilling machine - max drilling depth 150mm - max drilling width 200mm - worktop adjustable top/bottom, front/rear - dimensions of worktop 410x210mm - material pressure - dimensions L/W/H 2770x1840x1370mm - weight 720kg ATTRIBUTES - german production - used machine, very good condition Gxc2S8M Net price: 8500 PLN Net price: 1900EUR depending on the price 4.4 EUR (Prices may change with higher fluctuations)

Condition: new, Year of construction: 2023, Power: 0.003 kW (0.00 HP), FAHD Planer thicknesser 410 x 1800 mm. with tiltable fence. TERSA cutter block. Bo9Ujwhyr

Condition: ready for operation (used), SCM ST4 W combined saw/milling machine sliding table 2600 mm saw axially adjustable 2 motors feed wood 3 rollers price 3000.- Ccco8Cw Condition checked for function

Condition: ready for operation (used), Technical characteristics 5-operation combination (planer, jointer, router, saw and mortiser) Thicknes planer : Usable width: 310 mm Useful height: 230 mm Surface planer : Usable width: 310 mm Table length 1400 mm Shaft diameter 70 mm, common to the robot and jointer Router : Shaft diameter 30 mm, length 125 mm Table width: 800 mm Saw: Blade diameter 250 mm, tiltable at 45°. Cdv8Rapfyy Cutting height with 250 mm blade: 80 mm Table width 800 mm Rip fence length: 635 mm Mortising machine : Wick mortising (0 to 16 mm) Power and Motors Voltage: 220 V Pluging: Singlephased Overall dimensions

Condition: good (used), Year of construction: 2016, Code: 0375 Brand: MACO 2/L Model: 400/C - CE Standard 3-works Combined machine (Surface planer/Thickness planer/Mortiser) for wood, composite materials, plastics - CE Standard - Year 2016 Technical data: Surface planer: Milled and rectified cast iron tables Worktable dimensions mm 400 x 1800 C93Bqte Knife shaft diameter mm 70 N° 3 knives Thickness planer: Wood passage mm 4-220 Feed speed 7 mt/min Work table mm 400 x 760 Mortiser: Work table mm 250 x 500 Longitudinal/transverse/vertical stroke mm 205/95/90 Spindle mm 0-16 Single-phase motor Hp 3 Overall dimensions mm 1950 x 1100 x 1100 h Weight kg 390

Condition: new, Description Work table made of heavily ribbed gray cast iron and base frame made of welded steel guarantee torsional rigidity and vibration-free operation Unique in this performance class: Format sliding carriage made of anodized aluminum for highest cutting precision Cutting plane directly on the saw blade Swiveling saw blade from 90° - 45 Trimming frame with aluminum crosscut fence and adjustable fence jaw for panels and large workpieces Milling protection hood for profiling Two independent motors for each working unit TECHNICAL DATA Dimensions and weights Weight (net) approx. 190 kg Suction connection Suction port diameter 120 mm Suction port diameter saw blade guard 60 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Nominal operating mode drive motor S6 Duty cycle drive motor 40 Power of drive motor 2 x 1.8 kW Sliding carriage and table Length of sliding table 1140 mm Format sliding carriage width 201 mm Boej0N0 Height of format sliding carriage 70 mm table length 1040 mm table width 224 mm Milling spindle spindle mandrel diameter 30 mm useful length of spindle 75 mm spindle speeds 5000/7500 min?¹ Milling tool diameter max. Tool diameter max. 160 mm tool diameter max. tenon milling 200 mm Circular saw unit trimming length 1200 mm Cutting width with rip fence 700 mm Max. Trimming width to the left of the saw blade 1200 mm Saw blade inclination 90 - 45 Max. Cutting height 90° 75 mm Max. cutting height Cutting height 45°60 mm Max. Saw blade projection 90° 67 mm Max. saw blade Saw blade projection 45°40 mm Diameter (main) saw blade 250 mm Speed (main) saw blade 4000 min?¹ Equipment Anodized aluminum sliding carriage Trimming frame with angle-adjustable crosscut fence with a folding stop and degree scale Saw parallel stop Eccentric clamp Table widening Trimming fence with wooden fence jaws Manual height adjustment of the spindle Saw blade height adjustment manual saw blade tilt adjustment manual  

Condition: good (used), Year of construction: 1999, For sale is a used Holzprofi KPSFN2000 circular saw-milling machine with a cutting length of 2000 mm. The machine is in good condition and has been checked and reconditioned by our specialist staff. (Fully functional) - Cutting length 2000mm - Cutting width 1150mm - cutting height 95mm - max. saw blade Ø 315mm - 3 cutting speeds - height adjustable + swiveling D7V2K2G - Extractable Ø 100 or 80mm - 2 motors á 3kw - year of construction 1999 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299 Related terms: circular saw, milling machine, milling machine, circular saw-milling machine, combined machine, combination machine Reference: R-E0375

Condition: excellent (used), SCM CU 350 The machine is tested and ready for immediate use. The machine can of course also be tested on site. Dpsguh You will find the technical data in the pictures. Price net plus VAT

Condition: good (used), Planing width: 350 mm, Casadei 350 multifunction machine tool . Five functions in one. 1- GRADING machine shaft width 350 mm , 3-knife shaft , 2- GRADING machine shaft width 350 mm , 3-knife shaft , max .planing height 200 mm , 3- Lift-lowering saw and saw carriage , 4- Milling machine spindle 30 mm . 5- Horizontal drilling machine . (Machine in nice technical and aesthetic condition .) Dprd77

Condition: ready for operation (used), Technical characteristics Shaft 50 mm Length 200 mm Cast iron frame Ov3K3Lr8Xp Table 800 mm Lateral tenoning carriage Max. workpiece width 400 mm Presser Max. tool Ø 250 mm 3 speeds Power and Motors Voltage: 380 V Motor: 5 CV Overall dimensions

Condition: new, Year of construction: 2024, For sawing, milling, planing/thickness planing and optional slot drilling in confined spaces High-precision format sliding carriage made of anodized aluminum, various lengths Large extension arm (1200 x 650 mm) with material roller and extendable aluminum telescopic fence up to max. 3200 mm with professional fence flaps Ceypq3Yghj Max. Saw blade Ø 315 mm, tiltable from 90° to -45°. Large swivel range of the milling spindle from 90° to -45° backwards Four milling speeds up to 10000 min-¹, manually adjustable With right-left rotation of the milling spindle Heavily ribbed dressing tables made of stress-free gray cast iron for decades of stability and flatness 2-stage feed for thickness planing Three independent industrial motors for continuous operation With lockable main switch, motor protection switch Fixed hand wheels Dimensions and weights Weight (net) approx. 857kg Dressing table Dressing table width 410mm Dressing table length 2000mm chip removal max. dressing 5mm Connection suction Suction port diameter 3 x 120mm Suction port diameter saw blade guard 60mm Installation information Required space length 5960mm Space requirement width/depth 5140mm Explanation of space requirements The dimensions take into account maximum travel distances or useful lengths. Working area length 1600mm Working area width/depth 1600mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Thickness Thickness table length 757mm Thickness table width 423mm Working height thickness min. 3mm Working height thickness max. 230mm Chip removal max. thickness 5mm Electrical data Supply voltage 400V Mains frequency 50Hz Rated operating mode drive motor S6 Duty cycle drive motor 40% Power drive motor 3 x 5,0kW Sliding carriage and table sliding table length 2660mm Format sliding carriage width 360mm format sliding carriage height 142mm table length 1250mm table width 430mm table height 900mm Milling spindle spindle inclination 0 - -45 spindle mandrel diameter 30mm useful length of spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min⁻¹ Milling tool diameter max. Tool diameter max. lowerable 210mm tool diameter max. lowerable 45° 150mm tool diameter max. tenon milling 275mm Planer cutterhead Type of cutterblock TERSA planing shaft diameter 87mm Number of planing knives 4pcs planing shaft speed 5200min-¹ Circular saw unit trimming length 2600mm Cutting width with rip fence 900mm Max. Cutting width left of saw blade 3260mm saw blade inclination 90 - 45 Max. Cutting height at 90° 90mm Max. Cutting height at 45° 63mm Max. Saw blade projection 90° 100mm Max. saw blade Saw blade projection 45° 71mm Diameter (main) saw blade 315mm Explanation Diameter (main) saw blade with scoring device Speed (main) saw blade 4000min-¹ Feed rate Feed speed 6 - 12m/min Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, combined with:- Slot drilling device- heavy roller table second handMake RexStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Q0Pmn

Condition: good (used), SICAR 300 multifunction machine tool . .Four functions in one. 1- GRADING machine shaft width 300 mm , 3-knife shaft , 2- GRADING machine shaft width 300 mm , 3-knife shaft , max .planing height 190 mm , 3- Saw lifting-lowering and 45 degree angle + saw carriage , 4- Milling machine spindle 30 mm . (Machine in nice technical and aesthetic condition) Dpnu8V

Condition: ready for operation (used), Technical characteristics 5-operation combination (planer, jointer, router, saw and mortiser) Thicknes planer : Usable width: 310 mm Useful height: 230 mm Surface planer : Usable width: 310 mm Table length 1400 mm Shaft diameter 70 mm, common to the robot and jointer Router : Bm9700Q2 Shaft diameter 30 mm, length 125 mm Table width: 800 mm Saw: Blade diameter 250 mm, tiltable at 45°. Cutting height with 250 mm blade: 80 mm Table width 800 mm Rip fence length: 635 mm Mortising machine : Wick mortising (0 to 16 mm) Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions

Condition: as good as new (ex-display), Year of construction: 2024, Combi 4-fold HOLZKRAFT CU 300 Classic F 23 N -- Technical data -- - Circular saw - circumference 2.250 mm max. saw blade Ø 315 mm Vogwugujg max. cutting height at 90°/45° 103 / 82 mm max. clearance width left of saw blade 2.310 mm cutting width at rip fence 820 mm saw blade inclination 90° -45° - Dressing - working width 300 mm planing table length 1.510 mm planing shaft Ø / number of planing knives 72 mm / 3 pcs. - Thickness table dimensions 300 x 585 mm min./max. working height 3 / 230 mm max. chip intake 4 mm feed speed 7 m / min -table milling machine - useful length spindle 100 mm max. tenon tool Ø 275 mm max. tool-Ø 210 mm spindle speed 3.500 / 7.000 / 10.000 rpm spindle-Ø 30 mm - general - motor power 400 V / 50 Hz, 3 x 5,0 kW (6,6 PS) Suction nozzle-Ø 4 x 120 mm suction nozzle-Ø saw blade protection 60 mm - Special offer price - Location: ex stock 54634 Bitburg

Condition: used, combined with:- spindle moulder- heavy sliding tableused, good conditionmanufactured by Rextype KFZ / 4mach.-No. 11.022cut width 600 mmsliding table length 1400 mmspindle moulder:motor 4.5 / 5.5 PSmotor 2 revs/motor pole switchrevs 4right hand-left hand rotationspindle diameter 30 mmcutter fence with fine adjustmentweight ca. 1100 kglocated in 97447 Gerolzhofensale in current condition as seen on fotos- free on truck - Fl7Dnp70U

Condition: as good as new (ex-display), Year of construction: 2024, minimax c 26g TERSA - multiple combination for sawing, milling, planing/thicknessing The work tables made of heavily ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free working. Unique in this performance class: lightweight aluminum sliding table, anodized, with ball contact system Swiveling saw blade from 90° - 45 Table extension arm with aluminum crosscut fence for panels and large workpieces Planing unit with TERSA quick change system with three planing knives Helical toothed steel feed roller for constant workpiece feed during thickness planing Curved milling hood for profiling, standard with fine adjustment Milling unit with two speeds Three independent motors for each working unit Quality Made in Europe Equipment details Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail Durably lightweight M802B Saw unit adjustment Manual height and angle adjustment of the saw unit via star knob Precise positioning by means of a scale TERSA planer cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Particularly low noise Table planer The milling unit has two speeds for flexible tool use Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helical toothed infeed roller guarantees constant infeed. The planing table can be folded towards the inside of the machine to save space. The conversion from planer to thicknesser is done in seconds with one handle. Surface planer Standard with TERSA planer blade quick change system Large dimensioned jointer tables The planing and thicknessing tables are made of grey cast iron and guarantee extremely smooth running and vibration-free operation. Saw unit Saw swivels up to 45 With saw blade 250 mm Ø at max. 80 mm cutting height On the rip fence can be cut up to 500 mm width. Table extension With degree scale and aluminum fence for angular cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer cutterhead Anodized aluminum format sliding carriage Table extension arm with crosscut fence and a folding fence Multifunctional fence for parallel cutting and planing Eccentric clamping arm Model minimax c 26gTERSA Article no. 5500027 Cutting length 1200 mm Cutting width with rip fence 540 mm Max. Cutting width on the left side of the saw blade 1200 mm saw blade inclination 90 - 45 degrees Max. Cutting height at 90° 80 mm Sizing slide length 1140 mm Format sliding carriage width 201 mm Height of sliding table 70 mm Saw table length 1024 mm saw table width 224 mm saw table height 900 mm Cutterblock type TERSA Cutterblock diameter 62 mm Number of planing knives 3 pcs Planing table width 260 mm Dressing table length 1040 mm Angle of inclination of sawing/planing fence 90/45 degrees Dressing chip removal max. 3 mm Thicknessing table length 450 Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Holzkraft Minimax ST 5es - Maximum equipment for professionals Saw-milling combination with miter cutting device and swiveling milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring unit with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be tilted from 90° to -45 High-precision format sliding carriage made of anodized aluminum Large extension arm (1200 x 650 mm) With material roller and extendable aluminum telescopic fence up to 3300 mm Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds With right-left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch With separate saw-parallel fence and separate jointing fence for dressing as standard Equipment details: Sliding carriage with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double cradle milling unit Swiveling, made of cast iron Fixing points directly on the table, thus optimal running smoothness Milling spindle mounted far up on precision ball bearings, thus low bearing load and longest possible service life Powerful industrial motors Milling stop Heavy-duty professional version The high-quality milling fence made of cast iron is supplied with fine adjustment as standard 3-fold positionable for quick return of the setting With fine adjustment via toothed rack, numerical display and aluminum milling stop jaws Rip fence With fine adjustment and quick clamping Sturdy round bar guide made of ground steel Conveniently folds down for cutting large workpieces Reversible aluminum ruler for narrow workpieces Bqmbuubk Cast iron double weigh saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, mounted on both sides Height and up to 45° inclination adjustable Scoring unit with separate scoring motor 0.55 kW as standard Boom with angle-adjustable telescopic crosscut fence with degree raster graduation Dimensions and weights weight approx. 900 kg Connection dust extraction diameter of dust extraction nozzle 3 x 120 mm Suction port diameter saw blade guard 80 mm Drive power scoring motor 0,55 kW main motor 2 x 5,0 kW Electrical data Supply voltage 400 V Format sliding carriage and table Width of sliding table 360 mm height of sliding table 142 mm Table length 1380 mm table width 465 mm Milling spindle spindle inclination 0 - -45 ° useful length of spindle 125 mm spindle speeds 3500/6000/8000/10000 min-¹ Milling tool diameter max. lowerable 240 mm tenon milling 320 mm Circular saw unit and scoring unit trimming length 3200 mm Cutting width with rip fence 900 mm Max. Trimming width to the left of the saw blade 3300 mm saw blade inclination 90 - 45 °. Max. Cutting height 90° 104 mm Max. Cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2024, minimax c 26g TERSA - multiple combination for sawing, milling, planing-thicknessing. The work tables made of heavily ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free working. Unique in this performance class: lightweight aluminum sliding table, anodized, with ball contact system. Swiveling saw blade from 90° - 45 Table extension arm with aluminum crosscut fence for panels and large workpieces Planing unit with TERSA quick change system with three planing knives Helical toothed steel infeed roller for constant workpiece infeed during thickness planing Curved milling hood for profiling, standard with fine adjustment Milling unit with two speeds Three independent motors for each working unit Quality Made in Europe Equipment details Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail Durably lightweight Saw unit adjustment Manual height and angle adjustment of the saw unit via star knob Precise positioning by means of a scale TERSA planer cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Particularly low noise Table planer The milling unit has two speeds for flexible tool use. The machine is equipped with a finely adjustable bow cutter for profiling. With the aluminum slide tenoning is possible without any problems. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helical toothed infeed roller guarantees constant infeed. The planing table can be folded towards the inside of the machine to save space. The changeover from planer to thicknesser is done in seconds with one handle. Surface planer Standard with TERSA planer blade quick change system Large dimensioned jointer tables The planing and thicknessing tables are made of grey cast iron and guarantee the smoothest running and vibration-free operation. Saw unit Saw swivels up to 45 With saw blade 250 mm Ø at max. 80 mm cutting height On the rip fence can be cut up to 500 mm width. Table extension With degree scale and aluminum fence for angular cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer cutterhead Anodized aluminum format sliding carriage Miter fence with one folding stop Multifunctional fence for parallel cutting and planing Eccentric clamping arm Model minimax c 26g TERSA Article no. 5500027 Cutting length 1200 mm Cutting width with rip fence 500 mm Max. Cutting width left of saw blade 1200 mm saw blade inclination 90 - 45 degrees Max. Cutting height at 90° 80 mm sliding carriage length 1140 mm Format sliding carriage width 201 mm Height of sliding table 70 mm Bav0Qcwv88 Saw table length 1024 mm saw table width 224 mm saw table height 900 mm Cutterblock type TERSA Cutterblock diameter 62 mm Number of planing knives 3 pcs Planing table width 260 mm Dressing table length 1040 mm Angle of inclination of sawing/planing fence 90/45 degrees Dressing chip removal max. 3 mm Thicknessing table length 450 mm Thicknessing table width 260 mm Thickness working height min. 3 mm Location: Ex stock 54634 Bitburg - immediately available -