Used veneer presses for sale (121)

Condition: ready for operation (used), electrically heated Press dimensions 2,200 x 1,100 mm 4 press cylinders, diameter 80 mm Temperature of upper and lower plate separately adjustable Hfsdpfx Aeygg Imsaljd

Condition: excellent (used), Catalogue number 7740 TECHNICAL SPECIFICATIONS - heating plate dimensions: 3000x1350 mm - number of loads: 1 - electrically heated shelf - clearance: 340 mm Hedsyk E Nqopfx Aaljfd - number of cylinders: 6 - cylinder diameter: 80 mm - total power: 20.7 kW - pump motor: 1.1 kW - dimensions (L/W/H): 3570x1600x2200 mm - weight: approx. 3500 kg ADVANTAGES – made in Germany – electrically heated shelves – unpainted – in impeccable condition – used press Net price: 48,900 PLN Net price: 11,650 EUR at an exchange rate of 4.2 EUR (Prices may vary with significant fluctuations)

Condition: refurbished (used), functionality: fully functional, Refurbished six-piston hydraulic platen press of Italian manufacture. Branded multi-layer press designed for easy wood veneering, supplied with warranty and service support. Veneering plate dimensions: 3000 x 1300 mm Pressure at full surface: 2.2 kg/cm² Total maximum pressure: 80 tons Number of hydraulic pistons: 6 Teflon MYLAR film on the plates Piped for water-based heating of the plates Option to install a hot water boiler Hodpfx Asvvbbcealjfd Price includes a fully refurbished machine Price: 10,000 EUR excl. VAT The machine will be refurbished, set up, and tested. The refurbishment status and machine readiness for collection must be confirmed in advance! In stock at Telnice near Brno, Czech Republic Testing, demonstration, and operator training included as standard.

Condition: used, total width: 1,300 mm, total length: 2,600 mm, total height: 2,000 mm, overall weight: 2,800 kg, pressing force: 65 t, opening width: 300 mm, cylinder diameter: 80 mm, transport width: 1,300 mm, space requirement width: 1,300 mm, space requirement length: 2,600 mm, transport height: 2,000 mm, transport length: 2,600 mm, space requirement height: 2,000 mm, empty load weight: 2,800 kg, plate width: 1,100 mm, table width: 1,100 mm, table length: 2,200 mm, No. 04486 Veneer press Ott JU 60 Used Heating plates 2200 x 1100 mm LW Plates gold anodized, in very good condition Electric heating 2x 6 kW 4 hydraulic cylinders, diameter 80 mm each Total pressing pressure 65 tons Specific pressing pressure at full capacity 2.7 kg/cm2 Opening width 300 mm Button control for close - open - stop Circumferential emergency stop safety pull cord Transport dimensions approx. 2600 x 1300 x 2000 mm LWH Weight approx. 2800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Hfsdpfx Aoyfw D Ajalod For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: good (used), Code: 0276 Hsdsx Iu Hujpfx Aaljfd Brand: ORMAMACCHINE Model: NPC - CE Standard Hot press for carpentry, furniture, custom-made furnishings, veneering, panels, doors, wooden window frames, composite materials and various - CE Standard Technical data: Working platens dimensions 3000 x 1300 mm Opening between platens 400 mm N° 6 pistons Total thrust 90 ton Platens with coils Platens heating with hot water via boiler complete with circulation pump and expansion tank Motor 2 Hp Overall dimensions mm 4600 x 1600 x 2000 h Weight 3800 kg

Condition: used, Year of construction: 1970, Year of manufacture: 1970 Total pressing force at 320 atü: 80 tons Pressing cylinder: 6 pistons Motor power: 1.1 kW Heating-up time approx. 20 min. Hfsdpfxjwx Rrnj Aalod Price ex works.

Condition: excellent (used), Fully functional veneer press by OTT, model JU60. Plates: 225x120 cm. 2x6 kW electric heating. Test run possible at any time. Hjdpfx Aajytyk Islsfd

Condition: excellent (used), Fully functional veneer press by OTT, model JU2511/70. Plates: 255x110 cm (excellent condition). 2x6.8 kW electric heating. Test run possible at any time. Hfsdjytykujpfx Aaled

Condition: good (used), Year of construction: 2000, total width: 4,000 mm, total length: 4,000 mm, total height: 3,200 mm, overall weight: 43,000 kg, type of input current: three-phase, temperature: 160 °C, pressing force: 500 t, continuous press with mylar belt dimensions: 2700 x 3200 mm Hodeycxvuspfx Aaljfd

Condition: excellent (used), functionality: fully functional, Shelf length: 3000 mm Shelf width: 1300 mm Number of pistons: 6 Electric heating Piston diameter: 75 mm Teflon film on the shelves Hodeyt I Ibspfx Aalsfd External dimensions: 3700x1700 mm Year of production: 2001

Condition: ready for operation (used), shelf length: 2500 mm shelf width: 1200 mm number of pistons: 4 clearance between shelves: 49 cm cold pressing motor power: 1.1 kW Hfsdpfoytfa Uex Aaled

Condition: as good as new (ex-display), Year of construction: 2024, new heating plate press, hydraulic ITALPRESSE type XL/6 30-13 with gold anodized plates Touch display control - electric heating plates 3.000 x 1.300 mm - Total pressure 90 to. - Number of heating plates 2 pcs. - Number of shelves 1 pc. - Cylinder stroke 350 mm - Shelf opening 350 mm - Loading from all sides - Number of impression cylinders 6 pcs. - Diameter of pressure cylinders 85 mm - Power requirement of hydraulic unit 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity 22 KW - High-pressure insulating plates - Working temperature 90° C. - max. temperature 120° C. - Operating voltage 400 V/50 Hz - Safety regulations according to CE standard Hfsdpodx R Tfjfx Aalod Standard equipment: - Movement of the press table with rack and parallel guides at 2 corners of the press table made of self-lubricating material - Touch screen electronic control unit for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnosis and display of fault messages - Safety circuit with two-hand operation - Safety rip cord - Safety bracket for lower pressing table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold anodized heating plates (Busse) Location: From stock 54634 Bitburg - immediately available-

Condition: excellent (used), Year of construction: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control system - Electric heating platens 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs. - Number of levels: 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-around loading possible - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V, 50 Hz - Safety specifications according to CE standard Standard equipment: - Movement of the press table with rack-and-pinion and parallel guides at 2 corners of the press table made from self-lubricating material - Electronic control unit with touch screen for machine control and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for adjusting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Safety pull cord Hfjdpfsxgbxfjx Aalsd - Safety support for lower press table Accessories included: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Ex stock - Immediately available -

Condition: new, Year of construction: 2025, functionality: fully functional, PLATEN LENGTH MM. 3000 PLATEN WIDTH MM. 1300 PRESS STROKE MM. 400 VERTICAL CYLINDERS 6 - DIAM. 70MM. INTERMEDIATE PLATENS CONFIGURATED TOTAL THRUST 90 TON TOTAL POWER KW 21 Hfjdpfx Aaji E Tz Holed HEATING DIATHERMIC OIL

Condition: excellent (used), Shelf length: 250 cm Width: 130 cm Four actuators Hfedsxgnp Dspfx Aalsd

Condition: good (used), Code: 0283 Brand: ITALPRESSE Model: 25/13 Fabricated platen for diathermic oil press Hfedjyazdiopfx Aalsd Technical data: Platen dimensions: mm 2500 x 1300 Max temperature up to 120° Max working pressure: 3/5 kg/cm2 Heating medium pressure 0,5 ate Composition: Aluminium - Flat gauged steel sheet - Coil of piping for fluid circulation - Reinforcement piping - Flat gauged steel sheet - Insulating material

Condition: excellent (used), Shelf press for veneering Cooper 3000×1300, water-heated Hfsdpjyi Sfcsfx Aaljd

Condition: ready for operation (used), working length 3300 mm Hfedpfx Aeypcxtealsd working height 1800 mm 3 vertical cylinders 2 horizontal cylinders manual operating mode

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Hjdpfxsxgpaqe Aalefd Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. Hfedswd N Rmepfx Aaljd • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Hfedpfxsfh Tmme Aalod Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: used, OTT 300K100 Shelf Press Shelf length: 255 cm Hedpjyh H Uyefx Aalsfd Width: 135 cm Clearance between shelves: 350 mm Shelves are in nice gold color but have a single dent of approximately 3 cm diameter Electric heating Piston diameter: 100 mm, 4 pistons Weight approximately 3.2 t Machine in stock, inspection possible

Condition: used, Shelf Press Tiger TM/6 Shelf length: 300 cm Hfodpfox S Nbbex Aalsd Width: 130 cm Clearance between shelves: 650 mm Nice, straight aluminium shelves Water heating system; the machine has its own heaters and circulation Option to connect to external central heating Piston diameter: 85 mm, 6 pistons Emergency stop switch (pull cord) Pressure: 5 kg/cm2 Weight: approx. 6.5 t

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Minimum thickness: 4.0 mm Maximum width: 1300 mm Hsdpfow A Nh Asx Aalsfd Maximum length: 3000 mm Hydraulic pressing on thickness and width. Pneumatic pressing on length. Mechanically driven feeding table, gravity roller discharge. Both plates have been reconditioned, both the suffusion plate and the copper coating have been changed. 30kW high frequency generator

Condition: used, used Manufacturer Joos Machine no. 790 1 level Plate size approx. 2200 mm x 1100 mm Opening width approx. 280 mm Aluminum plates Piston diameter 80 mm Space requirement approx. 2800 mm x 1300 mm x 1850 mm Weight approx. 3000 kg Total connected load 13.2 kW heating power Storage location 97447 Gerolzhofen, free loaded, unpacked Hsdpfx Aewrtlqealofd Handover in as-is condition as inspected, without guarantee and warranty