Used Veneers for sale (546)

Condition: ready for operation (used), Year of construction: 2023, This ORMA NPC/DIGIT 6/95 30/13 AS-BO was manufactured in 2023. A used hot press, it features a press area of 3000x1300 mm, six cylinders, and a maximum press opening of 400 mm. It delivers a total pressure of 90 tons and includes an 18 kW electro-heater for thermo-oil heating up to 120°C. Consider the opportunity to buy this ORMA NPC/DIGIT 6/95 30/13 AS-BO veneer press. Contact us for more information about this machine. Application Types Dodpsxtgmhjfx Af Iowd Pressing / Laminating

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4607269, total width: 2,100 mm, total height: 2,400 mm, total length: 2,830 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 2,850 kg, grinding height: 160 mm, power: 22 kW (29.91 HP), height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 20,500 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, pass-through height: 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, table height adjustment: 157 mm, power of feed motor: 1,500 W, input frequency: 50 Hz, air demand: 1 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, 🪵 2002 Viet Challenge 223 Wide Belt Sander – Heavy-Duty Finishing, Very Good Condition Take your wood finishing to the next level with this 2002 Viet Challenge 223 Wide Belt Sander – a high-performance sanding solution for woodworking professionals. Built in Italy for precision and durability, the Viet Challenge 223 is trusted by cabinetmakers, joiners, and production workshops across Europe. Now available in very good condition, this twin-head sander offers consistent results on solid wood, veneered panels, and composite materials – ideal for both calibration and fine finishing. ✅ Key Features – Viet Challenge 223/20 Year of Manufacture: 2002 Condition: Very good – clean, well-maintained, fully operational Sanding Heads: 2 (roughing + finishing) Working Width: 1,350 mm Working Thickness: 3 – 160 mm Minimum Workpiece Length: Approx. 400 mm Abrasive Belt Dimensions: 1,380 mm x 2,620 mm Main Motor Power: 11 kW + 11 kW (approx.) Feed Speed: Variable, 3.7 to 20.5 m/min Powered Height Adjustment Emergency Stop and Safety Features Feed Motor: 1.5kW Lifting Motor: 0.37kW Suction Speed: 25m/s Compressed Air: 6 bar Air Consumption: 17 l/min Machine Dimensions: 2830 x 2100 x 2400mm Machine Weight: 2850kg 🧱 Ideal For: Solid wood panel calibration Veneered panel sanding MDF and composite board finishing Flat panel furniture components General wood surface preparation and finishing Dwedpfx Afswnr A Hs Iod 📦 Machine Includes: Viet Challenge 223 main sanding unit Twin sanding heads for combined roughing & fine finish Integrated feed table and dust extraction ports Original manuals and safety guards Fully tested and ready for operation 📍 Availability & Delivery This machine is in stock and available for immediate inspection and delivery. Shipping support available throughout Ireland, UK, and Europe. 📞 Enquire Now Looking for a dependable wide belt sander with professional-grade features? This Viet Challenge 223 is a rare find at this price and condition. Viet Challenge 223 Wide Belt Sander for sale Used wide belt sander in very good condition Heavy-duty industrial sander for woodworking Woodworking sanding machine for panels Twin-head wide belt sander for solid wood Viet wide belt sander UK / Ireland / Europe Wide belt sander for furniture and cabinetry production

Condition: used, Veneer press continuous press gluing press plate press Bürkle HSO 240/D 340/140 Press dimensions: 3400x1400mm Max discharge pressure 240T Max pressing pressure 6 kg/cm² Cylinders 8 pcs. with diameter 110mm Stroke 150mm Solid plates 40mm Water heated with boiler up to 60 degrees. Plates can be heated up to 150 degrees with the right boiler. Press dimensions: 2500x3900xH2800mm, 8500kg Input conveyor dimensions: 2200x3600mm, 500kg Documentation still available, first owner! Sold as one unit including conveyor belts Djdpfxowng Tyj Af Iewd - Documentation available: No - Max. workpiece length [mm]: 3400 - Max. workpiece width [mm]: 1400 - Number of cylinders [pcs]: 8 - Total working pressure [ton]: 240 - Working pressure [kg/cm²]: 6 - Heating type: Water heated - Max. working temperature [°C]: 150 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Veneer unit and feed console – quick conversion between veneer sanding and solid wood sanding. • Large sanding belt – 2600 x 200 mm. • Electromechanical oscillation – maintenance-free, separate oscillation motor. • Auxiliary table with contour sanding attachment – included in the standard scope of delivery. Height-adjustable idle disc table with adapter for dust extraction for sanding at the belt tensioning roller. Additionally equipped with a sanding arbor. Supplied with rubber rollers and sanding sleeves Ø 30, 40, 50, and 60 mm. • Digital display – for precise adjustment of sanding unit inclination. • Torsionally rigid, heavy machine stand made of solid steel – high running smoothness and stability (machine weight: 405 kg). • Large, heavy worktable with sliding coating – very smooth operation, easy height adjustment with handwheel, additional adjustment towards or away from the sanding belt, table size 935 x 460 mm. Dwsdjxvnn Sspfx Af Ied • Sanding unit tiltable by handwheel – from -10° to 90°, easy and precise thanks to a digital angle display. • Exact angular precision – sanding unit with mechanical locking. • Large mitre stop – with stepless angle adjustment and sliding ruler. • Adapter for dust extraction – on both sides: 1x at the idle disc table, 1x each at the right and left extraction hood, each Ø 100 mm. • 2 x 400V sockets on machine stand – one for machine connection and one for feed unit (included in delivery). • Cutout in the machine stand for pallet truck – facilitates easy in-plant transport and repositioning of the machine. Belt dimensions: 2600 x 200 mm Worktable: 935 x 460 mm Auxiliary table at belt tensioning roller: 350 x 350 mm Sanding arbor with rubber rollers Oscillation (can be switched on/off) Table height adjustment by handwheel Sanding unit tiltable -10° to 90° via handwheel Digital display for sanding belt inclination Motor: 2.2 kW Belt speed: 15 m/sec Feed console with 3-roller feed unit with veneer attachment Extraction: 2 x 100 mm External dimensions: 1700 x 1000 x 1100 mm Weight: approx. 415 kg Availability: approx. mid-April 2026 Location: Wetterau

Condition: used, Veneer Press BÜRKLE U 80 - used - Emergency stop rope, control via push button ----- Technical specifications ----- Pressing area: 2,550 x 1,300 mm, power per heating plate: 9,100 W, max. opening height: 4,000 mm, number of cylinders: 6 units, dimensions LxWxH: 3,150 x 1,450 x 1,785 mm, weight: 3,700 kg Dwodpsxfg A Hefx Af Isd

Condition: as good as new (ex-display), Year of construction: 2023, Demonstration machine with approximately 10 operating hours Another machine available immediately (ex works in Neckartailfingen) *Options available for an additional charge - see below Included: + Profile rotor for higher throughput We would be happy to conduct a free test with your material. I invite you to visit us in Neckartailfingen. You can also send us your material via freight forwarding, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Blades: 15, multi-rotatable, Double row of blades available for an additional €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Funnel volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 40 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg Dimensions (l x w x h): approx. 1,737 x 1,167 x 1,650 mm Moisture content: < 30% dry matter . Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start-up - Fast hydraulics - Automatic OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . Shredder options available for an additional charge: - Raise the shredder by 30 cm (prepared for conveyor belt) + €2,080 net - Eco-Rings: + €1,980 net (recommended for more than 20% hardwood) Dsdpfx Afsb Ny Eyo Iewd - Double row of blades + €995 net - Special scraper + €990 net (recommended for shredding veneer or paper, or items with a material thickness of less than 3 mm) - Bent conveyor belt + €8,770 net Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm - Automatic overhead magnet + €5,980 net Alternatively, a fixed magnetic block above the conveyor belt for regular manual scraping + €990 net (for low-volume shredding) Metal parts) - Conveyor belt and overhead magnet control + €2,750 net (Start and stop synchronized with the chipper) or manual start and stop of the belts + €595 net . Raw material requirements: - Moisture content (absolute dry matter) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, VERY WELL-MAINTAINED MULTIPURPOSE SURFACE SANDING AUTOMATON WITH CROSS AND LONGITUDINAL BELT; SUITABLE FOR WOOD CALIBRATION SANDING, WOOD SURFACE SANDING, AS WELL AS INTERMEDIATE COAT SANDING. Maximum working width: 1,300 mm Conveyor belt with vacuum system Conveyor extraction unit with pressure regulator Feed motor: 1.5 kW Dwodsxrdk Uspfx Af Ijd Feed speed: 3 - 15 m/min CSD – computer-controlled selective pressure regulation technology with 2 mm tolerance compensation Distance between control rollers: 16 mm Pressure shoe spacing: 48 mm Switch spacing: 82 mm Unit configuration: 1) Cross sanding unit Belt dimensions with lamella intermediate belt Abrasive belt dimensions: 15 x 4,800 mm Abrasive belt speed continuously variable, therefore suitable for surface and lacquer sanding 2) Longitudinal sanding unit with combined sanding roller and sanding shoe, hence suitable for both calibration sanding as well as wood and veneer surface sanding Abrasive belt speed continuously variable, therefore also suitable for lacquer sanding Abrasive belt dimensions: 1,350 x 2,620 mm Control: Machine operation control on the right-hand machine side Up to 20 programs storable Transport dimensions: 2.4 x 2.2 x 2.35 m Weight approx. 5.4 t Large selection of sanding belts included

Condition: used, Year of construction: 1996, Press size: 2550 x 1350 mm, Total pressing force: 90 t, Specific pressing force: 2.8 - 4.0 kg/cm², Hydraulic cylinders: 4x 90 mm, Opening width and press stroke: 400 mm. Storage location: Supplier. Dsdpjxugzbofx Af Iowd

Condition: used, Dimensions (LxBxH): 135 x 55 x 102 cm Boe-Therm Temp 300 – Oil Heating Unit Serial number: 83054 Type: Temp 300-36-4 VE General Data - Medium: Thermal oil - Oil capacity: 98 liters - Max. temperature: 300 °C - Heating capacity (kW): 36 kW - Voltage: 3 x 400 V / 24 V - Frequency: 50 Hz - Power consumption: approx. 54.8 A - Control system: Electronic panel with digital display and control buttons - Safety features: Overtemperature, oil level, and pressure monitoring Dwjdpsxpva Aofx Af Ied Applications - Temperature control in plastics industry (injection moulding, extrusion) - Metal processing (heating systems, forming presses) - Woodworking (veneer presses, laminating presses) - Other processes requiring stable and high temperatures Function The unit heats thermal oil and circulates it through external circuits (such as moulds, press plates, or installations). This ensures a constant temperature up to 300 °C, with high precision and reliability. - Documentation available: No - Serial number: 83054 - Transport dimensions: 1350mm x 550mm x 1020mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Used machine Dwedpfx Afexvnnxo Ijd with ELKOM gold-anodized energy-saving plates Equipment and technical data: Pressing surface: 2500 x 1300 mm Total pressing force: 80 t Specific pressure: 2.5-3.0 kg/cm² 6 pressing cylinders, 68 mm diameter Opening: 300 mm Weight: approx. 4700 kg Machine dimensions (LxWxH): approx. 3080x1550x1800 mm Availability: approx. mid-April 2026 Storage location: Wetteau

Condition: used, Johannsen T 94 long-belt sander for precise sanding of solid wood and veneer surfaces. The machine is ideal for joineries and high-end interior finishing and, thanks to its robust construction and sensitive belt control, ensures a consistent sanding pattern. Includes a large supply of sanding belts. Grinding length: approx. 2,600 mm Grinding width: about 850 mm clearance height: approx. 340 mm Dwsdpfx Afoxtbvdo Ijd height adjustment: electrical engine: 4 kW LBH: approx. 4 x 2.2 x 1.5 m mass: about 700 kg

Condition: as good as new (ex-display), Year of construction: 2024, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Dedpfx Asdwktksf Iswd Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: used, Year of construction: 2015, total width: 1,800 mm, total length: 3,600 mm, total height: 2,100 mm, Empty weight: 3.750 kg Veneer press Steton P 70 E Year of construction 2015 Press size 3100x1300mm Opening 450mm Number of cylinders 6pcs. Dwjdpfownh R Tex Af Iod Cylinder diameter 70mm Electric heating 19.6kW, max. 120 degrees Max. pressing pressure 70 tons Pressure 2 KG/cm² Dimensions. 3600 x 1730 x 2060mm, weight 3750kg - Year: 2015 - Documentation available: Yes - Transport dimensions: 3600mm x 1800mm x 2100mm (l x w x h) - Transport weight [kg]: 3750kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Used machine Technical data: Plate size: 2200 x 1100 mm Max. opening: 315 mm Heating medium: Electric Pressing pressure: 2.7 kg/cm² Dwedpfx Afexuxhaj Iod Cylinders: 4 Dimensions: 2540 x 1220 x 1850 mm Weight: Approx. 2500 kg Availability: End of January 2026 Location: Frankfurt

Condition: as good as new (ex-display), Year of construction: 2024, Special price for our prefeeder Another machine, available immediately (ex works Neckartailfingen) approx. 24 operating hours. Including: + profile rotor for increased throughput Options: Double row of knives + 895 € net Veneer and paper scraper + 970 € net * Recommended for extremely thin materials with a thickness of less than 3 mm Our mütek MRZ 530 single-shaft shredder shreds a wide variety of materials such as all types of waste wood, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cable, paper, cardboard and plastics. The machine is characterized by its robust design, which guarantees consistent quality in continuous operation. We will be happy to carry out a free test with your material. We invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we can document the test with pictures and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 ph, Blades: multi-rotatable, Rotor diameter: 260 mm, Control: PLC Siemens S7-1200, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 qbm, throughput 1 - 5 hopper fillings / h, hydraulically operated pusher, Screen perforation of your choice (10 - 40 mm), suction nozzle Ø 160 mm, Weight approx. 1,000 kg, Dwodpsd Db N Iofx Af Ijd Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of the raw material: must be below 30 % atro. Included as standard: - Fast hydraulics - Profile rotor - Switch cabinet with Siemens PLC control - Automatic star/delta start - Automatic OFF when the rotor is idling - Removable suction chute - Speed 70 - 100 rpm for higher throughput capacity - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Stable guides for the hydraulic slide Other shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net - Folding conveyor belt +8,770 € net Horizontal part: 1200 mm Rising part: 2500 mm Angle: 0-60 degrees adjustable Discharge height: approx. 2000 mm + - 100 mm - Overbelt magnet + 5.980 € net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) . Requirements for the output or raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear

Condition: used, Price: On request Veneer press Feed-through press HOT Colombo Dedpfxjwnhvvo Af Iewd Machine dimensions: 4400x1400 Oil heated input/output is included 8 cylinders Complete with glue roller etc. - Documentation available: No - Number of stages [pcs]: 1 - Number of cylinders [pcs]: 8 - Heating type: Oil heated Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical specifications: - Grinding unit can be swiveled via hand crank - The machine base is made of welded steel, ensuring high torsional rigidity and vibration-free operation - Oscillating sanding belt with a separate geared motor for improved sanding results - Oscillation can be optionally switched on - Graphite-coated sanding shoe for longer sanding belt service life - Height-adjustable sanding table allows use of the full sanding belt width - Additional table for sanding radii with integrated extraction ports - Spring-loaded belt tensioning system automatically compensates for differences in belt length - Equipped with adjustable stops, making it ideal for veneer sanding - Veneer overhang can be easily sanded down - With mobile undercarriage Dwsdpfxjwkbcbs Af Isd - Oscillation motor power: 0.11 kW - Mains voltage: 400 V - Frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Sanding surface length: 800 mm - Sanding surface width: 150 mm - Grinding unit swivel range: 0–45° - Worktable length: 950 mm - Worktable width: 450 mm - Worktable height adjustment: 110 mm - Dimensions: 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: short-term Location: Flörsheim

Condition: as good as new (ex-display), Year of construction: 2023, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (15 - 40 mm) Dsdpfx Afsgmfa Aj Iewd Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment base + € 3,750 net (prevents blocking of the pusher. Recommended for shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We are happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: used, - Documentation available: No - Number of glue rollers [pcs]: 2 - Roller material: Rubber - Roll diameter [mm]: 200 - Max. working width [mm]: 1300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Dwedpowivv Tjfx Af Ijd

Condition: new, Year of construction: 2025, one machine ready produced Your advantages: + extremely large cutting unit opening with 1300x1200mm + special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW at start-up Technical specifications: Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Tools: 37/70 knives Extraction nozzle Ø (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: Dedpfx Afjgbkkrs Iswd * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request --- Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: used, total width: 3,960 mm, total length: 1,600 mm, total height: 2,300 mm, Empty weight: 5.000 kg Price: On request Dsdownhulspfx Af Ijwd - Documentation available: No - Max. workpiece length [mm]: 1300 - Max. workpiece width [mm]: 3300 - Number of cylinders [pcs]: 6 - Transport dimensions: 1600mm x 3960mm x 2300mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1991, High frequency press Brand: Italpresse Type: GB/13 Max pressure: 120T Pressing area 2500x1300mm Pressing height 200mm 6 cylinders diameter 90mm Speed 12m/min. Dodpfx Afowng Tme Iewd Complete line with loading system, gluing machine, destacker and High frequency cabinet (separate for sale) Machine needs some maintenance. Probably the PLC lost his parameters, and some small parts needs to be changed.  - Year: 1991 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total width: 1,500 mm, total length: 3,000 mm, total height: 2,350 mm, Empty weight: 1.000 kg Veneer press Orma P25/2 Press dimensions 2500x1200mm Daylight 570mm Motor 2hp 2x cylinder 45mm diameter Dimensions 3000x1500x2350mm (LxWxH), weight +/- 1000kg Dwodpownha Isfx Af Ied - Documentation available: No - Transport dimensions: 3000mm x 1500mm x 2350mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Cold Veneer Press Italpresse Jolly/F Press surface 2500x1200mm Press opening 510mm 4 cylinders Total dimensions 2900x1400x2000mm (LxWxH), weight 1300kg - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Dwodpfxewnhg Is Af Ied

Condition: used, Price: On request Veneer press continuous press gluing press plate press Colombo Machine dimensions: 4500x1300 Oil heated to a maximum of 140 degrees input/outpu t6 cylinders Dwedpswnhabjfx Af Ijd Solid plates 40mm Glue roller: Osama S4R/P-1400 Year of construction 2000 Working width max. 1400mm Working height max. 100mm Roll diameter 250mm 4 rolls Sold as one whole including conveyor belts and glue roller. - Documentation available: No - Material of press plates: Steel - Number of cylinders [pcs]: 6 - Heating type: Oil heated - Max. working temperature [°C]: 140 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels