Veneer press

Cooper 3000×1300

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. Rbodpfx Aewd N Rmjcvjw • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: used, Year of construction: 1990, No. 04502 Veneer press Ott JU 2511/70 Used, year of construction 1990 Electro-hydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm LW Heating electric 4 hydraulic cylinders each 80 mm diameter Total pressing pressure 70 tons Specific pressing pressure 2.5 - 3.5 kg/cm2 Opening width 400 mm Button control for opening - closing - stop Pressure monitoring with automatic readjustment Adjustable limit switch for specific opening width HAWE pump Safety rip cord Incl. electric cable and plug 32 A Incl. electric plans, operating instructions as .pdf file Transport dimensions approx. 2900 x 1400 x 2000 mm LWH Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Redpfx Ajxwp S Ijcvjbw Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 alternate top bevel teeth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement readout for: Rbodpswka Ntefx Acvow - horizontal cuts: via scale and strip cutting stop - vertical cuts: via scale from 0 - 1,300 mm Extraction port: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Twist-resistant, freestanding machine frame Pneumatically retracting slatted frame Round bar guide vertical and horizontal Fine-adjustable folding stop Fine adjustment for horizontal cuts via handwheel Strip cutting stop Manual programming rail with 5 T-nuts Pneumatic plunge of the saw unit Pneumatic saw head lock Control unit at the saw assembly: start button, stop button Operator panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swiveling saw head Location: Flörsheim Availability: short-term

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Rjdpfx Aevvkd Tocvsbw Storage location: Nattheim

Condition: new, Year of construction: 2023, total width: 1,300 mm, total length: 3,000 mm, pressing force: 120 t, opening width: 400 mm, operating temperature: 120 °C, cylinder diameter: 85 mm, Good morning, We offer for sale a brand new shelf press manufactured by the Italian company OMC model PL 105 Logic Control 30/13 To begin with, some useful information about the machine: * working area 3000x1300mm * opening width 400mm * 6 cylinders with a diameter of 85mm * total pressure of 105 tons * maximum heating temperature 120 degrees * logic control system * machine control from touch panel Rodpfxjqu U Hqj Acvjbw * readings of temperature, pressure force, shelf opening time, loading area calculator, programming of gluing processes - we will set it all from the panel * power 21KW * CE certificate * 2023 year of production * heating medium: oil with built-in heater. Machine brand new, available from stock.

Condition: excellent (used), SCM Flex 1 Tenoning Machine Spindle diameter 40mm Total spindle height 200mm Two-speed motor with a power of 6.6/8kw Variable speed on belts: 3250/6500 and 5000/10000r.p.m Electric spindle lifting Maximum cutter size 270mm 2.2kw cutting saw unit Automatic side trolley Rjdpfxewtf Ade Acvjbw Pneumatic material clamps Four-roller feed

Condition: ready for operation (used), motor power 11kW working pressure 10bar capacity 1,59m3/min Redpfenr Hhijx Acvjbw

Condition: used, Year of construction: 2025, operating hours: 1 h, Operating hours: 1 _____ New tractor with dealer’s day registration prior to handover Standard equipment / technical data Engine Rated power (ISO) 82 / 110 kW/hp at 2200 rpm Max. power 86 / 115 kW/hp at 2000 rpm Max. torque 460 Nm at 1600 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4-cylinder / 4.4 l, 4V, STAGE 5 Regulated turbocharger, SCR catalyst DOC – Diesel oxidation catalyst SC particulate filter One-piece tilting engine hood Exhaust outlet right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation left with powershuttle, 4-step powershift Permanently cooled wet plate clutches with independent lubrication system 2-speed selectable PTO: 540 / 540E / 1000 Switchable electrically in the cabin PTO START/STOP button on the rear left fender Hydraulics / Rear linkage Open-center system 58 l/min total flow rate, max. 200 bar 2 control valves with hydraulic couplers: 1x single/double-acting, MR + 1x single/double-acting, NL, SST Quick couplers Cat. 3 with balls and catch bowls Cat. 3/2 Lower link sensing 5,200 daN max. lift capacity, 2 external lifting cylinders Adjustable stabilizers on both sides and 2 side stabilizers EHR with external control on both fenders Electrical equipment Thermostart, 120 A alternator Electric battery isolator Power supply (12 Volt) for external devices with plug Axles / additional weights Rear axle ND with flange hub Oil-cooled disc brakes Quick-adjust automatic hitch Rear fender outside width 2.00 m, without extensions Front weight carrier with integrated towing device and towing pin Operator’s area Low-vibration mounted standard cab with standard roof, ventilation and heating, air conditioning Integrated safety frame with tinted glazing Doors with safety steps on both sides Adjustable steering column (height and angle) Air-suspended driver’s seat with armrests, swivel adapter, seat belt 2 large telescopic external & wide-angle mirrors Interior mirror Analog-digital dashboard (SIS) Radio pre-installed with antenna and speakers 4 work lights each front and rear on cab roof 2 headlights each in the engine hood and on handrails, 2 rear work lights on fenders Rear window wiper and washer All-wheel drive front axle with switchable differential lock Special equipment Includes fuel tank guard PowerControl & brake-to-neutral (clutch effect) 100 l/min, open center hydraulic system with combined oil flow (58+42 l/min) Leakage oil collector at quick couplers 3 control valves: 1x MR, double-acting, EA, SST + 1x double-acting, NL, SST + 1x double-acting, NL, SST + free return 2.5 t front linkage, 1 hydraulic line set, electric socket 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ Wide rear mudguard extensions Air conditioning Cab with mechanical suspension Telescopic external & wide-angle mirrors Passenger/instructor seat with belt Air-suspended driver’s seat, automatic adjustment with seat belt, swivel adapter & armrests Rear window wiper and washer Automatic battery isolator, 12 Rbedjyvmq Iopfx Acvew

Condition: ready for operation (used), Year of construction: 2009, Travel ranges working area 1: X: 6450mm, Y: 1535mm, Z: 250mm, working area 2: X: 6200mm, Y: 1535mm, Z: 250mm, working area 3: X: 6200mm, Y: 1520mm, Z: 275mm, axis travel configuration 1: X: 6820.5mm, Y: 1963mm, Z: 350mm, axis travel configuration 2: X: 6820.5mm, Y: 1963mm, Z: 350mm, axis travel configuration 3: X: 6820.5mm, Y: 1963mm, Z: 663mm (5-axis head), Z: 350mm (additional machining units), control: Biesse XP600. Maintenance: complete C-axis was replaced in 2015 including accessories, vacuum pump was fully replaced in 2016 including bellows, hoses and additional components, in 2021 the machine was equipped with a new high-performance control PC running a current Windows 10 operating system. With extensive documentation. An on-site inspection is possible. Rbsdpfx Acoylziisvjw

Condition: excellent (used), Panel saw STRIEBIG COMPACT TRK 5207 C - used - Welded frame with extremely high rigidity, automatically retracting support grid, stable locking of the saw carriage at top and bottom, control panel at eye level ----- Technical data ----- Cutting length: 4,600 mm Cutting height: 2,070 mm Cutting depth: 60 mm Saw blade diameter: 250 mm Motor: 3 kW Extraction connection diameter: 100 mm Required space (LxWxH): 5,716 x 1,500 x 2,814 mm Weight: 850 kg Quality information: Rbsdowyap Eopfx Acvsw - Folding support rails renewed - Fence bars renewed / overhauled - Complete basic inspection performed - Complete basic cleaning - Electrical system checked - Immediately ready for operation