Veneer press

Ott Junior 90

Condition: reconditioned (used), functionality: fully functional, power: 9 kW (12.24 HP), Ott veneer press connected load 380V 9kW Panel size 2250 x 1350 mm Elkom heating plates, gold anodized Hnsdpfx Ajtwp Iwjg Usg Plates and hydraulics in order

Condition: excellent (used), Motor power 1.2 HP, 400 V, 50 Hz Speed 2800 rpm Drilling table size 650 x 330 mm Cross adjustment 300 mm Depth adjustment 150 mm Hnedsvzramopfx Ag Uog Height adjustment 170 mm Table height 880 mm Weight approx. 280 kg

Condition: used, Holz Her Auriga 1308 FÜ + PU Compact design - Edge thickness 0.4 - 8 mm PLC screen control Edge-Control PPC 221 color display Pre-milling unit for edge preparation before the gluing section Fully automatic edge magazine for both coil and strip material Gluing unit GLU JET cartridge + PU bonding - multi-system Adhesive application via nozzle technology Workpiece height 6-65 mm Automatic glue height adjustment Pressure unit 1912-3 pneumatic End trimming unit 1918 pneumatic for coil and strip material up to 8 mm edge thickness With pneumatic adjustment from 0-10° mitre for trimming saws Milling unit for flush trimming 8 mm, corner rounding, bevel trimming at 15° via control panel Profile trimming unit 1832 pneumatic, rounds corners up to 3 mm edge thickness in throughfeed Scraper unit for bevels and radii Flat scraper unit – finish Spraying device – PU Complete set of DIA tools included Machine is WORKSHOP-REFURBISHED in TOP CONDITION Available from stock in Lieboch Hodpfoxrr Uzox Ag Ueng

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width: 1,350 mm, Costa calibration machine Hnjdpfxswmxh To Ag Ueg

Condition: used, functionality: fully functional, saw band length: 5,550 mm, saw band width: 80 mm, type of input current: three-phase, cutting height (max.): 400 mm, table width: 1,060 mm, table length: 800 mm, working height: 400 mm, input voltage: 400 V, - Italian manufacture - Lamella band saw - Unpainted - Very good condition - Used saw Band Saw: Hedpfxow H Rq Ho Ag Ueng - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Hjdpfx Aewd N Rmjg Ujng Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: used, Year of construction: 1993, machine/vehicle number: 4610.17, - Manufacturer Bürkle - Type DAL 1-1300 R - Year of manufacture approx. 1990 - 1993 - Working width 1300 mm - Machine is being overhauled, then in very good condition - Working height 870 mm - Part height 3 - 80 mm - Operating side right - Paint application roller 50 Shore - Dosing roller hard chrome-plated approx. 174 mm - Counter-pressure cylinder rubberized - Belt transport Hnsdpfx Agsumvkvj Ueg - Length 1050 mm - Feed adjustable via handwheel 6 - 30 m/min - Total connection approx. 2 kW - Weight 3250 kg - With control cabinet - Volt, Hz 400 / 50 - Machine number 4610.17 - Product number 8479 8997 - Voltage fluctuations max. +/- 5 %

Condition: like new (used), Working width 1350 mm Hsdpfx Agsuuitgs Uong The machine is in excellent, new condition as shown in the pictures.

Year of construction: 2006, condition: used, Technical data: Type: P2M L 24/09 Year of production: 2006 Factory number: 94600105 Voltage: 400 V Frequency: 50 Hz Power consumption: 53 Kw Current: 81 A Weight: 8150 kg Hedeg Ty Twjpfx Ag Uong Machine Dimensions : Machine width : 410 cm Machine length: 160 cm Machine height : 330 cm Dimensions of control cabinet: Width of control cabinet : 100 cm Length of control cabinet: 50 cm Height of control cabinet: 160 cm

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: - Fixed milling spindle; newly fitted bearings - with table extension and extendable frame support 2500 mm - Motor 5.5 kW - Speeds 3000/4500/6000/8000/10000 rpm - Milling fence with 2 adjustment options: Hnsdpow I Uinofx Ag Usg - complete fence - rear take-off jaws - Extraction hoods: 2 x 120 mm - Automatic motor brake - Right/left rotation - with Haffner power feed with 4 rollers Weight approx. 700 kg Availability: by arrangement Location: Flörsheim