Condition: excellent (used), Panel saw HOLZ-HER Cut 70 6110 - used - PC control with optimization, scorer, automatic cut length detection, side pressing device, air cushion tables, infinitely variable feed of the saw carriage, touchscreen, label printer ----- Technical data ----- Cutting length: 3900 mm, Cutting width: 3100 mm, max. cutting height: 70 mm, Number of clamping devices: 6 pieces, Feed rate saw unit max.: 0-70 m/min., Feed rate width guide max.: 25/70 m/min., Motor power main saw: 11 kW, Motor power scorer: 1.1 kW, Saw blade main saw Ø: 350 mm, Saw blade scoring saw Ø: 180 mm, Extraction port Ø bottom: 120 mm, Extraction port Ø on the pressure beam: 3 x 120 mm, max. fuse rating: 35 A, Rated current of the largest consumer: 20.6 A Hsdpfx Apoyu N Rgjnenp Quality information: - Saw spindle newly bearinged - Scorer newly bearinged - complete basic inspection - complete basic cleaning - electrical system checked - ready for immediate use

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Hjdpfev Nhg Sjx Apnenp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Condition: used, Year of construction: 2021, Year: 2021 Hnsdpfx Apezix U Njnjp Dimensions: 107 cm 230v Motor: 2,2 kw SERIAL NR: 18/3 51753 Good condition. More in stock! Price: € 450,- incl. VAT

Condition: used, Year of construction: 2021, Year: 2021 Dimensions: 107 cm Hnjdozix Tlopfx Apnsp SERIAL NR: 18/3 51753 Good condition. Price: € 450,- incl. VAT

Condition: used, Year of construction: 2010, functionality: fully functional, surface conditioning machine equipped with: 4 brushes, 400 mm diameter electric height adjustment for the brushes oscillation capability reinforced motor Hsdszi Iivopfx Apnenp variable speed control for the brushes

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 0-240-14-3022, functionality: fully functional, cutting width (max.): 5,600 mm, saw blade diameter: 450 mm, cutting length (max.): 5,600 mm, stack height: 580 mm, TECHNICAL DETAILS Maximum cutting length: 5,600 mm Maximum cutting width: 5,600 mm Maximum panel dimensions with rear loading using a lifting platform: 5,600 mm x 2,240 mm Maximum stack weight on the platform: 10 tons Maximum stack height: 580 mm Saw blade projection: 125 mm Saw blade diameter: 450 mm Saw carriage feed rate during cutting: 5 to 150 m/min Hedpszhm Rijfx Apnsnp Saw carriage return feed rate: 150 m/min Program slider feed rate: 80 m/min Number of clamping devices: 9 Spacing of clamping devices: 75 mm / 275 mm / 475 mm / 1,075 mm / 1,775 mm / 2,475 mm / 3,275 mm / 4,075 mm / 4,875 mm MACHINE DETAILS Connected power of the main saw motor: 13.5 kW Connected power of the scoring saw: 2.2 kW Voltage: 400 V Frequency: 50 Hz Phases: 3 Air cushion tables: 5 units, each 2,810 mm x 650 mm Control system: CAD-matic 4.0

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 208.025, functionality: fully functional, cutting width (max.): 4,200 mm, cutting length (max.): 4,200 mm, stack height: 2,000 mm, Auction of a panel dividing saw with automatic magazine! TECHNICAL DETAILS Capacity: 4,200 mm x 4,200 mm Saw blade overhang at 90°: 72 mm Saw blade overhang at 45°: 50 mm Saw carriage feed rate (forward): 0-100 m/min Saw carriage feed rate (reverse): 0-100 m/min Feed rate of program slider: 0-25 m/min Program slider return speed: 80 m/min Collet maximum opening: 84 mm Collet positions: 65/245/395/985/1,605/2,225/2,845/3,465 mm Cross-pressure range: 50 - 1,250 mm Hnodpfx Aezhm E Hspnop MACHINE DETAILS Main saw motor: 14 kW Scoring saw motor: 1.5 kW Electrical supply: 400 V, 50 Hz, 3-phase Automatic magazine Magazine dimensions: 33.1 x 9.4 m Magazine height: 3,600 mm Stack height: 2,000 mm Input stack height: 1,900 mm Magazine speed X: 0-150 m/min Magazine speed Y: 0-150 m/min Magazine speed Z: 0-60 m/min Maximum panel weight: 300 kg Length adjustment of vacuum lifter: 2,000 - 4,200 mm Width adjustment of vacuum lifter: 1,000 x 2,100 mm Vacuum pump: 40 m³/h Rotating device: 90°

Condition: used, Year of construction: 1976, Description to follow! Hjdpfswqrw Asx Apnsnp

Condition: used, Year of construction: 1992, Offer in progress! Hodswh Uhfepfx Apnonp

Condition: good (used), Year of construction: 2004, Sawblade tiltable 0-45° ° Length of the rolling table 3.000 mm Hnjdpfx Apezkl H Ijnsp cutting width 1.100 mm Motor output 5,5 kW Cutting height 170 mm Saw blade diameter 250 - 500 mm Speed 2.800/4.000/5.500 U/min. weight of the machine ca. 1.950 kg

Condition: ready for operation (used), Year of construction: 2011, total width: 4,200 mm, total height: 2,900 mm, overall weight: 700 kg, Panel saw manufactured in 2011. This HOLZHER 1255 3858/1-101 features a maximum cutting length of 3,300 mm and a cutting height of 2,200 mm, providing versatile cutting capabilities. With a powerful 4.0 kW saw motor and integrated control system, it ensures precision and efficiency. Consider the opportunity to buy this HOLZHER 1255 3858/1-101 panel saw. Contact us for further details. • Cutting capacity: horizontal 3,300 mm; vertical 2,200 mm; cutting depth 60 mm • Saw motor power: 4.0 kW • Electrical: 400 V, 50 Hz • Blade diameter: 250 mm • Blade speed: approx. 5,450 rpm • Cutting directions: vertical and horizontal • Angle cutting device: 0°, 22.5°, 45° Hsdpey Nxkyofx Apnsnp • Dust extraction interface: port diameter 120 mm; required capacity approx. 1,400 m³/h • Control system: Integrated HOLZ-HER control (electronic positioning system) • Safety equipment: full blade guarding; two-hand safety control; mechanical hold-down system Dimensions Machine Depth 1600 mm

Condition: excellent (used), Year of construction: 1989, Elektra Beckum Bandsaw BAS 450 DB Year of manufacture: 1989 Cutting height: 300 mm Blade length: 3,380 mm Motor power: 1.5 kW Weight: approx. 120 kg Hnedpfx Ajyy U Txspnop Location: ex stock 54634 Bitburg - immediately available - Subject to prior sale

Condition: excellent (used), Sprossen Punching Machine 12 mm used, in excellent condition Hsdpeyza Anjfx Apnjnp Brand: Jeyden Sprossen blade 12 mm Right-hand support table with adjustable stop Space requirement approx. 1100 mm x 600 mm x 1100 mm Weight approx. 65 kg Storage location: 54634 Bitburg, loaded free onto transport, unpacked Sold as seen in current condition, without warranty or guarantee

Condition: excellent (used), Year of construction: 1986, Scheer circular cutting system Stable base frame Portal design allows workpiece to pass through Fully automatic control with skip function Height-adjustable drilling unit Cutting diameter: Min: 70 mm Max: 305 mm Depth: Max. 40 mm Up to 2 panels per cut Central bore: 7–10 mm Possible center bore: 15–35 mm Hnjdpfx Apeyy St Aenjp Drill motor BM 602 Machine cycle times: Beech: diameter 220 mm, depth 40 mm – 40 sec Plywood: diameter 220 mm, depth 40 mm – 20 sec Chipboard: diameter 350 mm, with bore D: 35 mm – 30 sec Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2002, Very well-maintained Striebig Automat III machine with pre-scoring unit 5300/2200. Feed is automatic. Cutting depth: 80 mm. Many spare parts included. Annual maintenance performed. Hnjdpfxozkubhs Apnsp

Condition: used, Präzision Kapp- und Gehrungssäge  / Precision Miter Saw OMGA T55 300 Baujahr / Year ca. 2009 mit Absaugung / with suction Sägeblattdurchmesser / Saw blade Diameter 300mm Schnittbreite / Cutting width max. 90° 135 mm Hjdpfsxvh E Rsx Apnenp Schnittbreite / Cutting width max. auf 45° 90 mm Schnitthöhe / Cutting high  max. 98 mm Festpunkte bei / Fixed Points on a 45°- 30° - 22°30' - 15° - 10° rechts und links Sehr guter Zustand / Very good condition Verstellbare Präzisionskapp- und Gehrungssäge mit Drehtisch, selbstzentrierender Blockierung in den Hauptwinkeln 45°, 30°, 22°30’, 15°, 10° und 0° rechts und links, manueller Blockierung der Zwischenwinkel, Winkelablesung von Gradskala. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Outside Rollers table for pre-loading (mm 5600 x 2200) Lifting scissor table (mm) 5600 x 2200 Rear pusher with 13 clamps / grippers (1 x Power Concept / Twin Pusher) With clamps / grippers - RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Turning device (rotating unit) at 90° Max. cutting width (mm) 5600 - Useful stroke of the pushing system (mm) 5600 Max blade projection (mm) 130 Scoring Unit (max saw diameter / power) mm 200 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 480 / Kw 30 Hodpfx Aszl S Nfspnonp Adjustable speed of the saw carriage (m/min) 1 - 150 N° 5 Front supporting tables with Air blowing system OPTION: Printer for labels - PICA

Condition: excellent (used), Omac B440 Lobe pump Hjdpfoy Tbgrex Apnenp Stainless, durable and efficient lobe pump, complete with 3Ph Seipee motor, 1475Rpm, 15Kw motor, on stainless skid, 120mm inlet and outlet, on mobile stainless skid

Condition: used, Year of construction: 2010, Sliding carriage: 3000 mm CNC parallel guide, cutting width 1000 mm. Motor: 5.5 kW electric motor for height and swivel adjustment. Swivel range: 0.5 - 47°. Digital display for swivel angle and cutting height. Saw blade diameter: max. 550 mm. Cutting height: max. 200 mm. Prepared for a scoring saw. Control panel at eye level, swiveling. Front table, swiveling. Table extension 840 mm. Angle/miter fence 3200 mm. Location: Supplier. Hnedpfszccg Dex Apnop

Condition: excellent (used), Year of construction: 1995, operating hours: 123 h, functionality: fully functional, Holtec ES 120 Log Infeed and Cut-to-Length System This system is a powerful complete solution for the infeed, inspection, and cut-to-length processing of logs. It is ideally suited for sawmills, wood processing plants, and biomass facilities, ensuring a continuous and efficient material flow. Holtec ES 120 Cut-Off Saw (Year of Construction 1995) The Holtec ES 120 is a proven industrial cut-off saw for the precise cut-to-length processing of logs. It processes logs with a maximum cutting cross-section of 1,200 × 600 mm. The powerful chainsaw drive with a motor output of approximately 11–15 kW ensures fast and clean cuts, even with larger log diameters. The machine is designed for continuous operation and is characterized by its robust construction and high operational safety. Cassel Metal Shark Octa Metal Detector The integrated Cassel Metal Shark Octa reliably detects metallic foreign objects in the wood before they enter subsequent processing machines. Thanks to the octagonal detector opening and modern DSP technology, even small metal parts are reliably detected. This protects machines from damage, reduces maintenance costs, and prevents production downtime. Advantages of the System • Robust industrial design for continuous operation • Precise cut-off cuts up to 1,200 mm log diameter • Integrated metal detection to protect subsequent machines • High operational safety and low maintenance requirements Hjdpfx Apszh Tykonjnp • Ideal for sawmills, the wood industry, and biomass plants.

Condition: good (used), Code: 0347 Brand: CENTAURO Model: CO 800 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames, plastics, aluminum, composite materials and various - CE Standard Hnjdpfx Aeyxmm Iepnop Technical data: Cast iron flywheel diameter mm 800 Max cutting height mm 520 Height of table from floor mm 960 Table dimensions mm 1170 x 800 Max blade length mm 5670 Motor Hp 5,5 Tilting work table Telescopic blade guard N° 2 suction inlets diameter 120 mm Overall dimensions: mm 1550 x 850 x 2500 h Weight kg 630

Condition: good (used), Code: 0228 Brand: OMS SALVARANI Model: 300 INVINCIBILE Pneumatic double croscutting machine for cutting wood, frames, fixtures, joinery, furniture, and various other materials Technical data: Working length mm 3000 Blade diameter mm 300 Motor power Hp 2,5 - Rpm 3000 Hnjdexnxumspfx Apnop Manual movement of the 2 heads Cutting from 0 to 45° right and left Pneumatic pedal for lowering the heads N° 2 pneumatic clamps for locking workpieces N° 2 suction ports diameter mm 50 Compressed air 6 bar Overall dimensions mm 4000 x 700 x 1250 h Weight kg 520

Condition: good (used), Code: 0445 Brand: LANDONI - ITALY Model: AGM 1 - CE Standard Portable electric sawig machine for heading and dividing of packed boards and logs - CE Standard This pack cutter is also suitable for the cutting of rolls of paper with the specific Widia chain, and for the cutting of plastic blocks or tubes Technical data: Straight-tooth chain DLC-type with pitch 1" Chain tensioner for automatic chain tensioning Hsdpozl Dn Hofx Apnonp Guide bar lenght cm 240 Useful cutting cm 200 Electric motor Hp 12,5 three-phase Automatic oiling of the chain Overall dimensions: mm 1800 x 900 x 3000 h Dimensions for transport: mm 3900 x 900 x 1900 h Weight kg 300

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 22-11-12-038, functionality: fully functional, operating hours: 77 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, actuation type: electric, rotational speed (max.): 6,000 rpm, rotational speed (min.): 2,000 rpm, table height: 910 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, saw blade guard, scorer, We are offering this very well-maintained Altendorf F45 EvoDrive panel saw, manufactured in 11/2022. Minimum saw blade diameter: 300 mm Maximum saw blade diameter: 450 mm Electrical power: 8.374 kVA Voltage: 400 V Frequency: 50 Hz Speed range: 2,000 – 6,000 rpm Current consumption: 20.33 A Motor: 5.5 kW (7.5 HP) VARIO - DUPLEX 1350 mm - Front support roller - CNC parallel fence - Angle/miter fence DIGIT L - On/off switch on the double roller carriage - STEG, second support on the double roller carriage - Double roller carriage with carriage length 3,200 mm - TPL 1,200 mm reinforced Hedpjy Hi Hgofx Apnonp - LED lighting If you have any questions or require further information, please feel free to send us a message or give us a call. Removal and transportation must be organized by the buyer and are not included in the price.

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Hodpoxg Igiofx Apnonp