Used Used Gang Saw for sale (44,395)

Condition: used, Mitre Saw REINHARDT RKP 160 S - used - Two-hand operation ----- Technical Specifications ----- Max. cutting height: 210 mm, Max. saw blade diameter: 600 mm, Infeed roller conveyor length: 3,500 mm, Outfeed roller conveyor length: 2,500 mm, Motor: 5.5 kW Ppedpfxoy Egxkj Ahlot

Condition: excellent (used), Panel Saw HOLZ-HER 1255 -used- Welded frame with extremely high rigidity, pneumatically retracting shifting grid, Pjdpsyyzp Hsfx Ahlopt stable latching of the saw carriage at both top and bottom, latch monitoring in vertical cut electrically controlled, foldable plunge lever on the saw unit, retractable riving knife for cut-outs, operator panel at eye level, digital display on the longitudinal fence, digital display for horizontal cut, strip cutting device, roller lift transport system, trim-capable support surface, dust extraction device TRK, dust-tested. ----- Technical Data ----- Cutting length: 5200 mm, Cutting height: 2200 mm, Trimming height: 2100 mm, Cutting depth: 60 mm, Minimum height on folding rail: 120 mm, Saw blade Ø: 250 mm, Motor: 4 kW, Extraction port Ø: 120/100 mm, Compressed air: 6 bar, Required space (LxWxH): 6500x1650x3050 mm, Weight: 900 kg Quality Information: - Fence strips replaced / refurbished - Comprehensive basic inspection - Complete basic cleaning - Electrical system checked - Immediately operational

Condition: used, Cross-cut saw BERG & SCHMIDT Junior 275 -used- Underframe, carriage ----- Technical data ----- Cutting height: 60 mm, Ppedpfou R S I Hjx Ahljt Voltage: 230 V

Condition: used, FORMAT 4 Kappa V60 Panel Saw - used - Welded frame with extremely high rigidity, automatically retracting support slats, stable locking of the saw carriage at top and bottom, control panel at eye level, digital readout on the longitudinal stop, Pjdpfsy Sazrsx Ahlopt digital display for horizontal cuts, strip cutting device, lift-roller transport system, edgable support surface, dust extraction unit TRK, dust-tested ----- Technical Data ----- Cutting length: 4,300 mm, Cutting height: 2,200 mm, Cutting depth: 60 mm, Saw blade Ø: 250 mm, Motor: 3 kW, Extraction port Ø: 2x 100 mm, Space requirement (LxWxH): 5,600 x 1,700 x 3,000 mm

Condition: excellent (used), Panel Saw ELCON ADVANCE 215 DSX-A - used - Automatic clamp system for trimming the lower edge, Pneumatically retractable support grid, Sturdy locking positions for the saw carriage at the top and bottom, Electrically monitored locking for vertical cuts, Retractable riving knife for cut-outs, Control panel positioned at eye level, Digital display at the longitudinal stop, Digital display for horizontal cuts, Scoring saw unit with counter-rotation, TRK extraction system, Psdpfeyq Rwyjx Ahlspt Certified dust extraction, Strip cutting device ----- Technical Data ----- Cutting length: 6,300 mm, Cutting height: 2,100 mm, Edging height: 2,000 mm, Cutting depth: 80 mm, Saw blade Ø: 300 mm, Motor: 4 kW, Extraction port Ø: 200 mm, Compressed air: 6-8 bar, Required space (LxWxH): 7,700x2,000x3,000 mm Quality Information: - Guide rails renewed - Complete basic inspection - Thorough cleaning - Electrical system checked - Immediately ready for operation

Condition: excellent (used), Panel Saw HOLZKRAFT SI400es - used - Scoring unit, tilt-able, parallel fence with fine adjustment, outrigger table, speed display, angle/miter fence, overhead guard (narrow and wide), automatic brake, dust-tested ----- Technical Data ----- Tilting range: 0-45°, carriage length: 3,200 mm, cutting width: 1,270 mm, cutting height: 130 mm, max. saw blade diameter: 400 mm, scoring saw blade diameter: 120 mm, crosscut fence extendable up to: 3,200 mm, miter fence tilting range: 0-45°, speeds: 3,500/5,000 rpm, motor power: 7 kW, scoring motor power: 0.55 kW, table height: 900 mm, extraction port diameter: 120/80 mm, dimensions (LxWxH): 3,650 x 2,000 x 1,600 mm, weight: 630 kg Quality Information: Ppedpfx Ahjy Dhukoljt - Sliding table checked / readjusted - Clearance cuts checked / readjusted - Set to manufacturer's specifications - Brake checked - Complete basic inspection - Complete basic cleaning - Electrics checked - Ready for immediate use

Condition: excellent (used), Panel saw STRIEBIG COMPACT TRK 5207 C - used - Welded frame with extremely high rigidity, automatically retracting support grid, stable locking of the saw carriage at top and bottom, control panel at eye level ----- Technical data ----- Cutting length: 4,600 mm Cutting height: 2,070 mm Cutting depth: 60 mm Saw blade diameter: 250 mm Motor: 3 kW Extraction connection diameter: 100 mm Required space (LxWxH): 5,716 x 1,500 x 2,814 mm Weight: 850 kg Quality information: - Folding support rails renewed - Fence bars renewed / overhauled - Complete basic inspection performed - Complete basic cleaning - Electrical system checked Pjdpfx Ahewyap Eslept - Immediately ready for operation

Condition: used, Panel saw ALTENDORF F45 - used - double roller carriage, tilting, parallel fence with fine adjustment, outrigger table, table extension, anodized aluminium, table width extension, anodized aluminium, mitre fence, overhead guard, narrow and wide Pedew Nv I Uopfx Ahlopt ----- Technical specifications ----- Tilting range: 45°, Carriage length: 2,500 mm, Cutting width: 800 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Extraction nozzle Ø: 80 / 120 mm

Condition: used, Panel Saw ALTENDORF F45 -used- Double roller carriage, Scoring unit, Rip fence with fine adjustment, Support table, Hydraulic height adjustment, Hydraulic tilting adjustment, Digital tilt angle display, Speed display, Table extension, aluminium anodized, Table width extension, aluminium anodized, Angle/miter fence, Overhead guard, narrow and wide, Automatic brake, Dust tested ----- Technical Data ----- Tilting range: 45°, Carriage length: 3,200 mm, Cutting width: 1,300 mm, Cutting height: 125 mm, Max. saw blade Ø: 400 mm, Speeds: 3,000/4,000/5,000/6,000 rpm, Ppsdpfxew Nx A Ie Ahlst Motor power: 5.5 kW, Weight: 1,040 kg

Condition: excellent (used), Bandsaw HOLZKRAFT Techno Max S45 N - used - tiltable table, upper blade guide, lower blade guide, cutting height adjustment via handwheel, operating pressure indicator ----- Technical Data ----- Wheel diameter: 450 mm, Max. cutting height: 305 mm, Pedpfxeym Umqs Ahlspt Max. cutting width: 435 mm, Table size: 600x520 mm, Blade length: 3,724 mm, Motor: 2.2 kW, Extraction port: 120 mm, Weight: 165 kg, Dimensions: 1,850x800x830 mm Quality Information: - Blade run / imbalance checked - Band tires checked - Guides checked - Fully cleaned - Electrical system checked - Immediately ready for operation

Condition: excellent (used), Pressure beam saw PANHANS ECOPAN -used- PC control with optimization, scoring unit, automatic cut length detection, side pressure device, air cushion tables, movable tables, infinitely variable feed rate of the saw carriage, label printer ----- Technical Data ----- Cutting length: 4,200 mm, Cutting width: 4,200 mm, Max. cutting height: 72 mm, Number of clamps: 6 pcs, Feed rate saw unit max.: 100 m/min, Feed rate for width stop max.: 80 m/min, Main saw motor power: 11 kW, Scoring saw motor power: 1.5 kW, Main saw blade Ø: 300 x 30 mm, Ppsdpoyrqrtsfx Ahljt Scoring saw blade Ø: 180 x 30 mm, Extraction port Ø bottom: 140 mm, Extraction port Ø on pressure beam: 3x100 mm, Airflow volume: 5,000 m³/h, Compressed air connection: 6 bar, Air consumption: 140 l/min, Nominal current: 38 A, Max. circuit breaker: 50 A Quality information: - complete basic inspection - complete basic cleaning - Electrics checked - immediately ready for operation

Condition: excellent (used), Pressure beam saw HOLZ-HER Cut 70 6110 -used- PC control with optimization, scorer unit, automatic cut length detection, side pressure device, air cushion tables, infinitely variable feed of the saw carriage, touchscreen, label printer ----- Technical Data ----- Cutting length: 3900 mm, cutting width: 3100 mm, max. cutting height: 70 mm, number of grippers: 6 pcs, max. saw unit feed: 0-70 m/min, max. rip fence feed: 25/70 m/min, main saw motor power: 11 kW, scorer motor power: 1.1 kW, main saw blade Ø: 350 mm, scorer saw blade Ø: 180 mm, dust extraction port Ø below: 120 mm, dust extraction port Ø on pressure beam: 3 x 120 mm, nominal current largest consumer: 20.6 A, max. fuse: 35 A Quality Info: Pjdpoyu N Rgefx Ahlept - Saw spindle newly mounted - Scorer newly mounted - Complete basic inspection - Complete basic cleaning - Electrical system checked - Immediately ready for operation

Condition: excellent (used), Panel Saw-Spindle Moulder KNAPP KFS Profi T -used- Sliding table saw with format sliding carriage, with outrigger table, tilt-adjustable circular saw, mitre and angle fence, tilt-adjustable spindle moulder, moulder spindle with reversible rotation (clockwise/counterclockwise), fine-adjustable moulder fence ----- Technical Data ----- Cutting length (sliding table): 2,000 mm Cutting height: 103 mm Cutting width: 700 mm Max. saw blade Ø: 315 mm Saw blade tilt range: 45° Spindle moulder diameter: 30 mm Spindle tilt range: 45° Spindle speeds: 2,850 / 4,000 / 7,800 rpm Saw extraction port: 120 + 40 mm Spindle extraction port: 120 mm Dimensions (LxWxH): 2,010 x 1,230 x 83 mm Weight: 590 kg Quality info: - All settings checked - Adjusted according to manufacturer specifications - Complete basic inspection - Thorough basic cleaning - Electrical system checked Pedpfjyyzqdsx Ahlopt - Immediately ready for operation

Condition: excellent (used), Panel Saw HOLZ-HER 1255 SECTOR pro – used – • Welded frame with extremely high rigidity • Pneumatically retractable support grid • Sturdy saw carriage latching mechanism at top and bottom • Electrically monitored latching in vertical cutting mode • Foldable plunge lever on the saw unit • Retractable riving knife for cut-outs • Operator control panel at eye level • Digital display on longitudinal fence • Digital display for horizontal cut • Strip cutting device • Lift roller transport system • Trimmable support table • TRK extraction unit • Dust tested • Only used for 2 months ----- Technical Data ----- Cutting length: 5,300 mm Cutting height: 2,200 mm Cutting depth: 60 mm Saw blade Ø: 250 mm Motor: 4 kW Extraction port Ø: 120 +100 mm Podpfx Ajy N Rihshlept Compressed air: 8 bar Year of manufacture: 2025 Quality info: - Complete basic inspection - Complete basic cleaning - Ready for immediate use

Condition: good (used), Saw frame, guide rails, connecting rods, feed rollers, new roller shafts, racks, new rack heads, roller lifting hydraulic unit, gang saw frame stand with overhang plates, gang saw flywheel assembly, tight pulley and free-running pulley with bushing and many more parts Ppjdpfswhv Rnjx Ahlet

Condition: refurbished (used), 2 pieces 135 mm Ø x 180 mm Ø x 180/130 mm long suitable for Esterer S 71 and SS 56 gang saw Podju Rn Uiopfx Ahlept

Condition: refurbished (used), 2 pieces 125 mm Ø x 170 mm Ø x 173 mm long 1 piece 140 mm Ø x 190 mm Ø x 173 mm long Podpfx Asngz N Iehlept

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: Pjdpfjzabi Eox Ahlopt - track width: 340mm - shaft width: 360mm - blade bore diameter: 70mm - max. blade diameter: 315mm - max. cutting height: 180mm * from above - feed shaft, toothed, pneumatically pressed - 2 rows of kickback fingers - 3 smooth pressure slip rollers - kickback fingers - shaft with saw blades - 3 smooth pressure slip rollers - kickback fingers * from below - infeed traction shaft, toothed - track - shaft with saw blades - track - stepless feed speed regulation via inverter - main motor 2x55kW - feed motor 4kW - electric lifting of upper body up/down - electric adjustment of saw blade shafts - central lubrication - extraction port diameter: 2x150mm - dimensions (L/W/H): 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES – Italian production – double shaft – ideal for large elements – used multi-blade saw, in very good condition Net price: 145,900 PLN Net price: 34,740 EUR based on 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER S 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Psdpfjywh Hmsx Ahljpt

Condition: excellent (used), passing width 1.000mm, stroke 800 mm, saw motor 22 kW or 30 kW, high adjustment by gear motor with brake, automatic lubrication pump, clamping carriage 6 m with 7 m rack, 6 mechanical clamping stations Podpfx Ahetzlrfoljpt

Condition: excellent (used), CATALOG NUMBER 7901 Technical specifications: - track width: 300mm - working width of roller: 300mm - max saw blade diameter: 350mm - saw blade bore diameter: 70mm - max cutting height: 120mm - table width with extension: 750mm - table length: 1530mm - from above: - kickback prevention barriers (safety barrier against material reverse) - metal sliding roller - kickback prevention barriers - metal sliding roller - shaft with saw blades - 2 smooth metal sliding rollers - from below: - guide rail - kickback prevention barriers - track Ppsdpfsy S Aakjx Ahljt - central track lubrication - stepless feed speed adjustment - feed motor: 1.5kW - main motor: 22kW - brake - suction nozzle diameter: 200mm - overall dimensions (L/W/H): 2300x1370x1570mm - weight approx.: 1700kg ADVANTAGES – Italian manufacturing – very good condition – technical DTR documentation – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR (calculated at 4.2 PLN/EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Guide plates 1250 mm long x 460 mm high, strong steel base frame with 2 guide shafts and 4 adjustment spindles each, can be mounted behind any type of gang saw, also 2 robust, toothed pressure roller devices with 4 ball bearings each to complement it Ppodpfxeui Ifco Ahlst

Condition: excellent (used), 2 complete sets of white metal main bearings, each set consisting of 4 bearing shells, bearing inner Ø = main shaft Ø 140 mm, bearing outer Ø 200 mm or 220 mm, width of each shell 100 mm Ppedpfx Ahswv Rpholot

Condition: new, pinion heads for gang saw complete with ball joint pins and red brass bushes, spare part number 23 a + b or 235254-01 Ppjdpfx Aetq Eq Rjhlot

Condition: good (used), Year of construction: 1971, Esterer frame saw with many spare parts and at least 40 new and used saw blades. The gang saw is in a good, ready to use condition with minimal bearing play. After agreement the saw blade grinders can be sold with the saw. Psdpfx Asncfiyohlept