Used panel saws with a cutting length from 4000 to 4999mm for sale (63)

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-240-10-3388, functionality: fully functional, operating hours: 565 h, cutting width (max.): 4,250 mm, controller model: POWER CONTROL CADmatic 4 PROFESSIONAL, section length (max.): 4,300 mm, working height: 920 mm, Lightly used machine! TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Working height: 920 mm Nedpfxeyla I Re Agnjwc Speeds Saw carriage feed forward: 1–150 m/min Saw carriage feed backward: max. 150 m/min Program pusher speed forward: 90 m/min Program pusher speed backward: 90 m/min Angle cutting package Maximum panel thickness: 48 mm Leg length at 45°: min. 115 mm Angular accuracy at 1,000 mm: 0.1° Cutting angle: min. 0.0° MACHINE DETAILS Control system: POWER CONTROL CADmatic 4 PROFESSIONAL Main unit motor power: 13.5 kW Scoring unit motor power: 2.2 kW Mains voltage: 400 V Frequency: 50 Hz Required air pressure: 6 bar Compressed air consumption: 120 NL/min Extraction connection speed: approx. 26 m/s Negative pressure: 1,200 Pa Exhaust air volume: 3,800 m³/h Extraction connection—chip duct: 1 x 200 mm Extraction connection—pressure beam: 1 x 150 mm Operating hours: 565 h EQUIPMENT Power Concept Angle cutting package Groove-cutting package Automatic ejector rule Labelling package Data linkage to storage systems Note: Further details regarding machine configuration can be found in the attached document.

Condition: excellent (used), Year of construction: 2011, Used horizontal panel saw Manufacturer: Holzma Model: PROFI HPL 430/43/22 Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rail (double track): 9 pieces Clamps: 7 pieces, first 3 are 2-fingered Air cushion table, width 650 mm: 4 pieces, each 2160 mm long Central blower: 1 unit with increased air output - 3 angled lift clamps (2-fingered) - 1 angled lift clamp (1-fingered) - 1st air cushion table: 800 mm wide - Speed package: -> Saw carriage feed: 1 – 150 m/min Technical specifications: Nwjdjymx S Dopfx Agnec Blade projection: 95 mm Saw carriage feed: forwards 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle pressure device, min. pressure width 0 mm; max. pressure width full cutting length Main saw motor: 18 kW, frequency controlled Scorer saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection value with HS motor 18 kW: 28 kW Power Control CADmatic 4.0 control unit with 17" flat display Labeling with part graphics / label software / label printer PICA 104

Condition: excellent (used), Year of construction: 2021, Sale on behalf of customer. Machine details to follow… Location: Friedeburg area Dismantling and delivery available at extra cost. Nedpfx Agjylp S Eonowc

Condition: ready for operation (used), Year of construction: 2019, cutting length (max.): 4,300 mm, cutting depth: 4,300 mm, This MAYER Otto Meyer Type PS80P was manufactured in 2019. A robust panel saw with a cutting length and width of 4300 mm each, powered by a 9 kW main motor. Features include optimized travel speeds via an additional frequency converter and an automatic electronic clamping detection for panel corners. Consider the opportunity to buy this MAYER Otto Meyer Type PS80P panel saw. Contact us for more information. • Main motor power: 9 kW • Optimized travel speeds of the main saw via additional frequency converter • Automatic electronic clamping detection for detecting panel corners • Note: The technical data and descriptions are copies of the order confirmation at the time. Data is for information purposes only and is not binding. Nedpoygw Aujfx Agnjwc Additional equipment • Label printer

Condition: good (used), Year of construction: 1994, Panel saw Manufacturer: Striebig Model: Standard 3 TRK 6220A Year of manufacture: 1994 Cutting length: 5,300 mm Cutting height: 2,200 mm Cutting depth: 80 mm Power: 4.4 kW Speed: 4,750 rpm Nsdpfxjyiazvj Agnewc Two small notches in the rear area of the saw blade shaft. Lower guide for the saw blade guard is missing.

Condition: excellent (used), Year of construction: 2009, Machine Data: Panhans S 45 All in One Year of manufacture: 2009 Cutting length: 4200 mm Cutting width (programmable pusher travel): 4200 mm Angle stop on the left Roller tracks: 9 pieces, first 3 are dual-lane Clamping grippers: 8 pieces Air cushion tables: 4 pieces Central blower: 1 unit Technical Data: Saw blade protrusion: 70 mm, at 45°: 50 mm Saw carriage feed rate: forward 1-120 m/min, reverse constant 120 m/min Programmable pusher speed: forward 0-80 m/min, reverse 100 m/min Automatic cutting height adjustment; pressure bar height control Angle alignment device: min. alignment width 0 mm; max. alignment width full cutting length Main saw motor: 14 kW, main saw 350 mm diameter Scoring saw motor: 1.5 kW, saw 180 mm diameter Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connected load: 20 kW Total weight: 6200 kg Control: VISIOLINE with PIOS Professional V2.0.0.x Nedpfeyhnmgox Agnjwc Labelling package incl. label printer

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, cutting width (max.): 3,500 mm, saw blade diameter: 320 mm, overall weight: 4,800 kg, cutting length (max.): 4,200 mm, Equipment: scorer, TECHNICAL DETAILS Cutting area: 4,200 x 3,500 mm Saw blade projection: 80 mm Saw blade diameter: 300-320 mm Scoring saw blade diameter: 150 mm Saw carriage feed, forward: 5-100 m/min Saw carriage feed, return: 130 m/min Material pusher, forward: 25 m/min Material pusher, return: 80 m/min MACHINE DETAILS Motor power: 9 kW Scoring motor power: 1.2 kW Dimensions & Weight Weight: approx. 4,800 kg EQUIPMENT Label printer Control panel on left side 4 air cushion tables AV license dongle for Ardis optimization Nwsdpfxeyc Sggo Agnoc Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: used, Panel saw, panel dividing saw, horizontal panel circular saw, dividing saw -Motor power: 6 kW -Speed: 2880 rpm -Diameter max. Saw blade: 340 mm -Cutting height: 100 mm Njdjb R Addepfx Agnjwc -Saw motor laterally adjustable on dovetail guide: approx. 1000 mm -Saw motor pneumatically adjustable in height -with cleaning brush: 1000 mm wide -Max. Intermediate width: 1700 mm -Dimensions: 2200/1500/H2100 mm -Weight: 1220 kg

Condition: excellent (used), Longitudinal Cutting Saw MZ Project LC 5000 Nedpsxcx Sbofx Agnewc Cutting length: 5000 mm Cutting height: 100 mm Cutting speed: 0–60 m/min Saw blade size: 350–500 mm Saw blade bore diameter: 35 mm Saw blade rotational speed: 3000 rpm Main motor power: 11 kW Machine dimensions: 6900x1700x1840 mm Weight: approx. 3000 kg

Condition: new, Year of construction: 2025, TECHNICAL DETAILS: -Max. length of horizontal cut :mm 4200 Nodoq Rvymjpfx Agnewc -Max. length of vertical cut :mm 4200 -Max. height of cut :mm 2200 -Max. height of horizontal cut :mm 2080 -Max. depth of cut :mm 60 -Motor output :HP 5 (3.7 KW) -Blade diameter :mm 250 -Blade speed :rpm 5300 -Manual shifting frame, with visual reminders. -N° 4 positioners for horizontal cuttings. -N°1 Stop for vertical cuttings. -Short piece cutting device (L. 2340 mm), to support small panels. -Lift-up Rollers. -SELF-BRAKING motor. -V.400/3/50Hz. - pre-arranged for independent dust extraction -All standard accessories: safety device, soundproofing, set service tools, user’s manual. Optionel (not included in the price) Electronic Vertical measuring display Euro 1000,00 Optionel (not included in the price) Electronic Horizontal measuring display Euro 1000,00 ( not installed on the machine )

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Saw dimensions: 4300 × 4400 mm Blade projection: 95 mm Carriage feed: 5 – 120 m/min Carriage return: 120 m/min Pusher: 60 m/min 4 air cushion tables: 2000 × 600 mm 5 clamping grippers Nwsdpfeynkuaex Agnsc Available July 2026

Condition: new, Year of construction: 2025, functionality: fully functional, power: 20 kW (27.19 HP), cutting height (max.): 110 mm, cutting width (max.): 4,300 mm, overall weight: 7,200 kg, cutting length (max.): 4,300 mm, table width: 4,300 mm, warranty duration: 12 months, Equipment: scorer, New Panel Dividing Saw / Saw Center – New Machine For sale is a new, high-performance panel dividing saw (saw center) designed for the industrial processing of wood-based materials, particle boards, MDF, HDF, and coated panels. This machine stands out for its high precision, powerful drives, and fast feed rates—ideal for professional furniture manufacturing and interior fittings. Technical specifications: • Maximum cutting length: 4,300 mm • Maximum cutting width: 4,300 mm • Minimum gripper opening during cutting: 34 x 45 mm • Maximum cutting height: 110 mm • Feed speed, saw unit (work cycle): 95 m/min • Return speed (rapid traverse): 120 m/min • Feed speed, program pusher: 95 m/min • Main saw blade: Ø 450 mm (bore 75 mm) • Scoring saw blade: Ø 200 mm (bore 50 mm) • Main motor power: 18.5 kW • Scoring unit power: 2.2 kW • Program pusher power: 2 kW • Saw carriage power: 2 kW • Total installed power: 33 kW • Pneumatic working pressure: 0.6 MPa • Number of clamps: 12 • Machine dimensions (LxWxH): 7,901 x 6,656 x 1,890 mm Nodpfx Aeyhhx Asgnowc • Weight: 7,200 kg The machine is brand new and immediately available for operation. Ideal for series production as well as flexible custom manufacturing.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Used Panel Dividing Saw MAYER PS 2 Z - Year of manufacture: 2008 - Processing dimensions: 4300 x 2200 mm Nedpfjx Tcymex Agnewc - Immediately available - Rear lifting table with powered heavy-duty rollers - Electronic pusher unit - All roller conveyors and air cushion tables included - Ideal for bundle cutting

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, cutting dimensions 4300x4300 mm cutting height 95 mm beam feed with grippers 90 m/min Njdpfx Agsylbdtsnjwc cutting speed up to 150 m/min, infinitely adjustable main motor power 13.5 kW scoring saw motor power 2.2 kW blade diameter 350 mm label printer 4 air tables extraction requirement 3800 m³/h external dimensions 6500x7700 mm

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 220.242, functionality: fully functional, saw blade diameter: 350 mm, cutting length (max.): 4,300 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting Data Nominal cutting length: 4,300 mm Maximum saw blade diameter (S): 350 mm Scoring blade diameter (V): 300 mm Maximum saw blade projection above table (U): 95 mm Stack Height and Panel Thickness Maximum stack height (P): 80 mm Minimum panel thickness (P): 3 mm Strip Aligner Minimum aligning force: 300 N Maximum aligning force: 990 N Additional Specifications Nodsx Sqpmopfx Agnswc Maximum clamp opening (K): 90 mm Working height: 970 mm Overall height: 2,020 mm Machine Accuracy Positioning accuracy: ± 0.1 mm (measured at feed-in) Cutting straightness: ± 0.1 mm over 3 m cutting length Electrical Power and Speeds Main saw motor power: 15 kW Saw carriage forward speed: 5 – 120 m/min Saw carriage return speed: 120 m/min Feed-in forward speed: up to 80 m/min (Europe 25 m/min EN 1870-13) Feed-in return speed: up to 80 m/min EQUIPMENT Strip aligner Label printer Optimization software HPO/F N5

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Horizontal panel saw Max. panel width: 3800 mm Max. panel length: 3200 mm Nwjdpfjyh Nfzsx Agnec Max. main blade projection: 80 mm Max. cutting height: 70 mm 9 clamping grippers 4 front support tables

Condition: good (used), Year of construction: 2007, We offer for sale a very well-maintained HOLZ-HER 6210 panel saw center. The machine has been inspected, regularly serviced, and is in excellent technical condition. 🔧 Basic specifications: Nwjdpfxsydn Rqe Agnsc • Cutting dimensions: 4250 × 3850 mm • Overall machine dimensions: 6636 × 4420 × 1980 mm • Main motor: 11 kW • Scoring motor: 2.2 kW • Manual mode, EasyPlan, cut optimization ⚙️ Construction: • Robust frame and precision linear guides • Stable and precise operation even with large formats 🚚 Delivery and service: • We provide turnkey delivery of the machine, including: • Transport • Installation • Calibration • Operator training • We also ensure the supply of spare parts, consumables, lubricants, and regular maintenance.

Condition: like new (used), Year of construction: 2020, machine/vehicle number: 0-240-75-0703, functionality: fully functional, input frequency: 50 Hz, type of input current: three-phase, NEW PRICE ONLY 79,900 EURO!!! Price valid only until February 28, 2026! Don't miss this opportunity! Background: HOLZMA has been part of the HOMAG Group since 1987. In March 2017, HOLZMA Plattenaufteiltechnik GmbH was renamed to HOMAG Plattenaufteiltechnik GmbH, streamlining the brand under the slogan ‘one company, one brand’. Within the HOMAG Group, HOLZMA stands for precision in panel cutting. The brand’s panel saws (SAWTEQ series, formerly HPL) are renowned for their reliability and form the backbone of furniture manufacturing, combining high performance with advanced automation. We invite you to purchase a NEW and outstanding HOMAG SAW-TEC B-400 Pro Line panel saw, extended version, equipped for automatic storage handling. Offered saw is BRAND NEW. Purchased from HOMAG POLSKA Sp. z o.o. in 2020 and delivered directly to our facility by the manufacturer. The machine was only started up by the Homag service team— it has never been used since. Both the model and the Homag brand are benchmarks in the industry, regarded globally as leaders in cutting-edge, premium machinery. Our unit is exceptionally well-equipped, featuring virtually every option available. A basic version of this saw costs between 100,000–110,000 EURO net (425,000–467,500 PLN net)*, while our extended, automatic-storage-compatible model with additional features is valued at about 190,000 EURO net (807,500 PLN net)*. Advantages - High throughput enabled by automatic loading and extended saw blade projection. - High efficiency requiring relatively little floor space. - Engineered for optimized material flow and precise logistics. - Ready for integration in networked production environments. We maintain direct contact and support with HOMAG, should the saw require on-site installation and commissioning for the new owner. In our opinion, the discount we offer—over 45% off the new price—represents an unrivaled value for buyers seeking a modern, automatic-storage-ready saw, or even for customers who do not yet need automated storage, future-proofing their investment and saving up to 90,000 EURO net (approx. 400,000 PLN net)*. Of course, the saw can also be operated independently of an automated storage system. Nwsdpfx Aoygyvdsgnoc General notes regarding this offer: - The machine is BRAND NEW but manufactured in 2020; thus, no warranty or guarantee is provided. - No returns are possible. - The price in the advertisement is exclusive of VAT (23% for Polish buyers), which will be added to the invoice—please check how we present the price in the listing. - Single owner. * 1 EUR = 4.25 PLN. Welcome to all prospective buyers. We are property owners and developers in Poland, building houses and apartments in Warsaw (Poland's capital). All listed machines are our property, largely acquired as settlements from tenants in the furniture industry. We know their history and technical condition, consistent with our descriptions. We remain in direct communication with manufacturers (Homag, Otto Martin, OMC Machinery, FANUM) for maintenance support. Since these machines are surplus to our needs, we offer them at very attractive prices, especially considering they are essentially unused. Assistance with transportation across Poland or the EU is available. We invite you to inspect the equipment prior to purchase.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, operating hours: 1,200 h, Panel dividing saw Holzma HPP 380 Profiline with automatic labeller. Njdpfx Agexytlksnewc

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Numerical Control Power Control (CADmatic 4.1 - Professional) Lifting scissor table (mm) 4300 x 2200 Rear pushers (N.) 1 With clamps / grippers (No.) 7 Max. cutting width (mm) 4300 Njdpfx Ajd Nt N Uognswc Useful stroke of the pushing system (mm) 6750 Max blade projection (mm) 110 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 420 / Kw 18 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (No.) 3 + 1 long Total power (Kw) 28 OPTIONAL: No. 1 Printer for labels Optimizing Software Schnitt Profi(t) Practive

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution 2.0 with Software SP2 on Windows XP Lifting table (mm) 2200 x 4300 Twin Pusher Clamps / grippers 7 Nedoillukspfx Agnswc Max. cutting width (mm) 4250 Max blade projection (mm) 135 Max. clamps opening (mm) 125 Scoring Unit (max saw diameter 200 mm) Main Sawing Unit (max saw diameter 460mm / power (KW 21 / HP 28) Adjustable speed of the saw carriage (m/min) 6 - 150 Front supporting Air cushion tables (No.) 3 Total power (Kw) 43 (ca.) OPTIONAL: Optimisation software: HPO

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Numerical Control Power Concept Software CADmatic 4 Professional Lifting scissor table (mm) 4300 x 2200 No. 2 Rear pushers (TWIN PUSHER) Mod. POWER CONCEPT With clamps / grippers RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 95 (automatic) Nwsdoimr Icepfx Agnoc Scoring Unit (max saw diameter / power) 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) 380 / Kw 13,5 (Max 18) Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 28 OPTION: - Software Cut Rite (optimizzazione/optimisation) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Labels Printer (Option) - Software LABELING PACK BR 3/4/5 (etichette/labels)

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Outside Rollers table for pre-loading (mm 5400 x 2200 ca.) - OPTIONAL Njdpfx Agop N D Atonjwc Lifting table (mm) 4420 x 2200 No. 2 Rear pushers (one with clamps / grippers) No. 9 clamps Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 135 Max clamps opening (mm) 125 Scoring Unit (max saw diameter / power) 200 mm / Kw 1,9 Main Sawing Unit (max saw diameter / power) 480 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 6 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 36 (ca.)

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Nwodpsx Aqdcsfx Agnsc Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Lifting table (mm) 4300 x 2200 Nsdoq Rffiopfx Agnowc No. 2 Rear pushers (one with clamps / grippers) No. 8 clamps / grippers Max. cutting width (mm) 4200 Useful stroke of the pushing system (mm) 4200 Max blade projection (mm) 135 Max clamps opening (mm) 125 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 460 mm - Kw 21 Adjustable speed of the saw carriage (m/min) 6 - 150 Front Turning table (rotating at 90°) with air blowing system (mm 2100 x 4100) Total power (Kw) 36 (ca.)