Used trimming saws for sale (49)

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, operating hours: 7,198 h, power: 18.5 kW (25.15 HP), cutting width (max.): 900 mm, This machine comes with a Woodmizer hydraulic log deck Kljdpfoyub Iqex Apmew It has a 7m cutting length 18.5kWh saw engine

Condition: not inspected (used), Year of construction: 1991, Torwegge multirip saw Chain width 250mm Klsdjucnukopfx Apmjw cutting height 100mm Total connection 39kW

Condition: good (used), Year of construction: 1987, older but functional panel saw with a cutting length of 5.1 m max. cutting width: 0.4 m max. cutting height: 140 mm Ksdpfozl Hddsx Apmolw overall length: 6.35 m overall width: 1.2 m

Condition: refurbished (used), hydraulic feed drive unit, fully reconditioned, stepless variable; 1 unit for KME 2 or BM - right execution - without additional pump - type 56-009 Kljdpfxjirmulo Apmew

Condition: used, Year of construction: 1952, Double-edge trimmer / circular saw for edge trimming Manufacturer: Esterer Type: DK600 Year of manufacture: 1952 Maximum feed width: 70 cm 0-line on the left Adjustable saw blade on the right Kodpfezl N Tnsx Apmelw Immediately available Location: Austria, near Ried im Innkreis

Condition: used, Esterer DKV -160mm cutting height -with 2 mobile saws and 1 fixed saw -lath bush Kledpfx Aswtclijpmow -splinter separator

Condition: used, power: 11 kW (14.96 HP), cutting height (max.): 170 mm, total length: 5,850 mm, total width: 2,000 mm, total height: 2,040 mm, overall weight: 3,500 kg, No. 04548 Rip saw / longitudinal circular saw MABA ECO 4200 Used, good condition Klodpfx Aezcdn Njpmow Automatic longitudinal circular saw with extraction system Cutting length 4200 mm Motor 11 kW Saw blade diameter 350 - 550 mm Saw blade bore 30 mm Hydraulic feed 1 - 80 m/min, infinitely variable, with automatic cutting pressure compensation Cutting height 0 - 170 mm, infinitely variable, circular saw blade lowerable Automatic width stop, hydraulic, infinitely adjustable, LED display for width setting PLC control Rear table width approx. 1500 mm Extraction connection diameter 150 mm Transport dimensions approx. 5850 x 2000 x 2040 mm LWH Weight approx. 3500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Ksdpfxeuprqws Apmslw Connection to 400A 32A Used, functional condition

Condition: new, Year of construction: 2024, max. cutting height 160 mm max. cutting width 600 mm Klodevdcc Rjpfx Apmjw min./max. trimming width 25-300 mm Adjustment times of the widths 0.2-1.0 sec. Feed rate 5-30 (70) m/min. Saw motor 37 KW Feed motor 2.2 kW Electric height adjustment of the top rollers 2 lasers Splitting wedges in the machine Fixed bush Adjusting bush Cutting width display Automatic width adjustment Saw shaft diameter 70 mm Weight 3.500 kg Available at short notice

Year of construction: 2024, condition: new, - 160 mm cutting height Kedpfx Asbrq Ndspmolw - 750 mm cutting width - 5-50 (100) m/min steppless feed - 37-110 KW sawing motor - 75mm spindle diameter - 2 movable saw bushes

Condition: excellent (used), CATALOGUE NUMBER: 8026 TECHNICAL DATA: - Max. cutting length: 3100 mm Ksdozf Ixpopfx Apmelw - Max. cutting height: 80 mm - Max. cutting width: 570 mm - Main saw motor power: 10 kW - Blade diameter: 450 mm - Work table height: 850 mm - Work table width: 660 mm - Dust extraction port diameter: 1x160 mm, 1x170 mm - Overall dimensions (L/W/H): 5500x2100x1600 mm - Weight: approximately 2500 kg ADVANTAGES: - Suitable for trimming boards - Used saw, very good condition Net price: 29900 PLN Net price: 7119 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), cutting height (max.): 175 mm, cutting width (max.): 2,120 mm, saw blade diameter: 550 mm, overall weight: 2,500 kg, cutting length (max.): 6,200 mm, We sell: JRIMAC rip saw STANDARD - NEW - - Cutting length: 6,200 mm - Cutting width: 420 - 2,120 mm - Motor power: 11/15 kW - Cutting height: 175 mm - Precise, clean cut Klodpfxodndvko Apmsw - Cutting accuracy: +/- 0.5 mm - Clamping device with an extremely robust blade guard and dust extraction connection - PLC machine control - Stepless, frequency-controlled, high-performance feed motor - Comfortable semi-automatic saw blade height adjustment - Stepless width adjustment of the fence - "JRIMAC" quick-clamping system for saw blades - Front table extension made of plastic or solid wood - Forced-guided splitter - Lower standard dust extraction channel pre-installed and ready for connection - CE-compliant, dust-tested - Processing of more than 12 different materials possible - Reliable spare parts and customer service

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), cutting height (max.): 210 mm, cutting width (max.): 3,000 mm, saw blade diameter: 550 mm, height adjustment type: electric, overall weight: 2,800 kg, cutting length (max.): 11,200 mm, We sell: JRIMAC rip saw/multifunction saw MULTICUT -NEW- - Precise and clean cut - Cutting direction left - right/ right - left - Flexible and efficient working - Air cushion table for comfortable processing of panels - 90° stop ruler for cross-cuts - Clamping jaws for optimum processing of sheet material - Forced-guided pneumatic hold-down device with zero cut device - Various options for triggering the cut - Convenient, fully automatic saw blade height adjustment - Stepless adjustment of the width stop - Electronic positioning control - Saw blade quick clamping system "JRIMAC" - High work safety Kljdpfjrdh Tksx Apmjw - User-friendly - Cutting accuracy +/- 0.5 mm

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, saw blade diameter: 600 mm, working height: 900 mm, We are selling 1 x CrossCut600. Cutting dimensions: 50x765 - 140x605 - 180x340 - 200x200 mm Maximum cutting height: 200 mm Saw blade: Ø 600 mm Kedefl Imaepfx Apmjlw Working height: 850 mm Dust extraction port: bottom Ø 120 mm, top Ø 100 mm - Infinitely adjustable, pneumatic feed system - Hydraulic brake cylinder for consistent feed speed - Pneumatically controlled workpiece clamping device - Cutting initiation via 2-hand control, with safety guard - Roller conveyors and stop systems available upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), cutting height (max.): 260 mm, saw blade diameter: 800 mm, working height: 880 mm, We are selling 1 x CrossCut 1.000 Cutting dimensions: 60x940 - 140x820mm - 180x720 - 220x520 - 240x340 Maximum cutting height: 260mm Saw blade: Ø 700mm Working height: 880mm Dust extraction port at the bottom and top: Ø 120mm Kledpjrfudrsfx Apmew - Infinitely adjustable, pneumatic cutting feed - Hydraulic brake cylinder for consistent stroke speed - Pneumatically controlled workpiece clamping device - Cutting activation via 2-hand control, with protective shield - Roller conveyors and stop systems available upon request

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3 kW (4.08 HP), cutting height (max.): 180 mm, cutting width (max.): 350 mm, saw blade diameter: 450 mm, We are selling 1 x CrossCut 450. Cutting dimensions: 50x320 - 100x280mm - 115x260mm Maximum cutting height: 115mm Saw blade: Ø 450mm Working height: 920mm Dust extraction port at the bottom and top: Ø 100mm - Infinitely adjustable, pneumatic cutting feed Koderfudnepfx Apmslw - Hydraulic brake cylinder for consistent stroke speed - Pneumatically controlled workpiece clamping device - Cutting activation via 2-hand control, with safety guard - Roller conveyors and stop systems available upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, cutting height (max.): 210 mm, cutting width (max.): 2,120 mm, saw blade diameter: 550 mm, height adjustment type: electric, total length: 11,000 mm, overall weight: 2,500 kg, cutting length (max.): 9,200 mm, saw drive: 15,000 W, JRIMAC Longitudinal Saw "TOP" - NEW - * Cutting length 2200 - 9200 mm Kodpfxogk Nvns Apmolw * Cutting width 420 - 2120 mm * Cutting direction left - right (right - left available on request) * Cutting height max. 210 mm with high-quality saw blade Ø 620 mm. * Precise and clean cut due to the robust, self-supporting welded construction of the machine frame. * Carriage guidance via linear guides, with ball-bearing, maintenance-free rollers. * Safety bar mounted above the machine table with a 6 mm thick blade guard. * Dust extraction connection Ø 160mm, ready for connection, located at table height on the upper right and lower left. * Flexible and efficient working thanks to the 250 mm opening of the blade guard above the table edge. * Infinitely variable, frequency-controlled, and powerful feed of the carriage. * The max. feed speed can be adjusted. * Automatic, infinitely variable saw blade height adjustment. * Infinitely variable width stop adjustment via multiple operating levers. * Electronic positioning control. * "JRIMAC" quick-clamp system for the saw blade allows for a quick saw blade change. * Cutting activation standard (small, mobile foot pedal). * Front table supports made of wood, plastic or Pertinax. * High level of operational safety. * Use and installation of exclusively high-quality components. * The electrical control cabinet is easily accessible and mounted on the front of the machine. * The machine's electrical system is designed for 230/400 volts, 50 Hz. * BG-tested for dust emissions * EC - type tested according to directive 2006/42/EC * Forced-guided splitter * Processing of more than 12 different materials possible * Reliable spare parts and customer service

Condition: used, Year of construction: 1973, machine/vehicle number: F72288, functionality: fully functional, cutting height (max.): 130 mm, total length: 105,000 mm, cutting length (max.): 8,000 mm, Jrion edging saw, cutting length 8000 mm. Functional. Loading with crane possible. No warranty. Klsdswimhyepfx Apmow

Condition: excellent (used), CATALOGUE NUMBER 8019 TECHNICAL DATA - Max. cutting length: 3700mm - Max. cutting height: 1300mm - Max. cutting width: 700mm - Main saw motor power: 11kW - Clamping beam - Saw blade diameter: 550mm - Work table height: 860mm - Pneumatic clamping - Work table width: 135mm - Dust extraction nozzle diameter: 2x150mm - Overall dimensions (L/W/H): 5600x1500x1900mm - Weight: approximately 3000kg - For trimming boards - Pneumatic clamping - Hydraulic saw guidance - Cutting width adjustable hydraulically - Unpainted Klsdpfezddz Sox Apmew - Used saw, very good condition Net price: 39900 PLN Net price: 9500 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: used, Year of construction: 2006, machine/vehicle number: -, functionality: fully functional, input current: 40 A, type of input current: AC, cutting height (max.): 140 mm, saw blade diameter: 450 mm, saw blade bore: 80 mm, total length: 6,500 mm, total width: 1,800 mm, total height: 2,100 mm, overall weight: 1,500 kg, drive type: 3 x 4 KW Motoren, operating pressure: 6 bar, compressed air connection: 6 bar, feed length X-axis: 800 mm, feed length Y-axis: 5,000 mm, main saw diameter: 450 mm, pressure: 6 bar, Equipment: saw blade guard, We are offering this used JRIMAC multi-blade saw, 2-blade version, manufactured in 2006, for sale. Machine type: Machine no.: 0060401 Rated voltage: 3/N/PE/400/230 V - 50 Hz Rated current: 40 A Kledpfjzd Hcdox Apmsw Power consumption: 20 kW Minimum tool diameter: 450 mm Operating pressure: 6 bar Year of manufacture: 2006 Weight: 1500 kg Length: 6500 mm Width: 1800 mm Table height: 900 mm Overall height: 2100 mm Cutting length: 5100 mm, electrically adjustable Cutting height: 140 mm, 3x Cutting depth: 800 mm, 3x If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, Sawmill for sale: The line starts with a Bongioanni bandsaw and a Costa Multiprisma sawmill. Due to their design, they are suitable for processing both soft and hard hardwoods. The price includes the lines, additional machines (dust extraction, recycling machines) as well as the necessary saw blades and spare parts. The sawmill can be viewed in Cegléd, Hungary, by prior arrangement. Line 1: - 1-1 Log yard with single-sawn saw - 1-2 Costa Multiprisma: 280 two-axis prism saw with log turner, 60-80 m3/8 hours depending on the wood species and diameter - 1-3 Roller conveyor with discharger - 1-4 Custom-built cross-cut saw: for single-size cutting, with size adjustment option. - 1-5 Conveyor belts for transporting lump waste. - 1-6 Grinder (drum) - 1-7 Grinder conveyors: screw conveyor, bucket elevator, chute, direct loading onto wagon/truck 2nd line: - 2-1 Log store with splitter - 2-2 Log conveyor track, with drop-off - 2-3 Intermediate log store with splitter - 2-4 Bongioanni log splitting bandsaw and trolley, with 1300 digital control, multiple size presetting options, sheet deflection indicator, laser ruler, 25-45 m3/8 hours; depending on the type of wood, diameter and cut pattern - 2-5 Roller conveyor with ejectors - 2-6 Cross conveyor with singler - 2-7 Storti TGS-78 cutting saw: with digital control, three saw units for up to double the size of the cut - 2-8 Roller conveyor with graders - 2-9 Intermediate prism magazine - 2-10 Roller conveyor - 2-11 Costa Leopard II. series cutter, with 2-axis automatic feed and power control - 2-12 Roller conveyor with ejector and sorting table - 2-13 Conveyor belts for lump waste - 2-14 Grinder (drum) - 2-15 Grinder conveyors: screw conveyor, bucket elevator, rédlers (walking floor truck loading option) 3. Auxiliary machines: Kljdpfxjv Hm T So Apmew - 3-1 E. Gillet slitting band saw, associated conveyors, manipulator, feed mechanism - 3-2 Joiner's band saw (800) - 3-3 Pallet cube cutting machine (starboard) - 3-4 SOCOLEST Valdoi double edge circular saw, with conveyors, cutting circular saw - 3-5 VEB STANDARD single-axis formatting circular saw - 3-6 STVO single-axis formatting circular saw machine

Condition: used, Year of construction: 2011, • Cutting length: 4,200 mm • Motor: 11 kW (15 HP) • High cutting precision thanks to the free-standing, torsion-resistant steel frame and carriage guidance running on oversized, hardened and ground round steel rails. • Infinitely variable feed speed controlled by foot pedal over the entire cutting length. • Feed speed: 1–80 m/min • Saw spindle speed: 2,900 rpm • Maximum cutting height with Ø 600 mm saw blade: 190 mm • Maximum cutting height with Ø 400 mm saw blade: 90 mm • Rip fence and machine table. • Rip fence adjustment via multiple control levers on the front of the machine for precise positioning, with a large digital readout. The fence can be easily rotated and tilted. • Rip fence adjustment range up to 800 mm. • Control system o Electronic machine and fence control (PLC control) with an easy-to-read touchscreen. • Swivel-mounted control panel on a swing arm. • One 30 mW red laser for displaying the cutting line. Kledezkkf Aopfx Apmew • Fast and safe saw blade change using the "Easyfix" quick-clamping system. • Safety guard with automatic opening assisted by two gas springs. • One carbide-tipped saw blade: 450 × 4.4 × 80 mm, Z=40 teeth. • Saw blade bore diameter: Ø 80 mm. • Electrical equipment o Control cabinet integrated into the machine frame. • Connection data o Upper right extraction port: Ø 160 mm o Lower left extraction port: Ø 160 mm o Extraction air velocity: 30 m/s o Total air requirement: 4,340 m³/h o Compressed air supply: 6–8 bar • Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: excellent (used), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. Kjdpfx Apot E Nw Tjmelw 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Original PAUL roller tables in various widths and lengths, available in standard or heavy-duty versions for use in front of cross-cut, trimming and re-cutting circular saws; short work tables allow, for example, the transfer of material from the cross conveyor, passage through the table assembly or the loading of heavy beams by forklift; long work tables are also available in various dimensions

Condition: good (used), Longitudinal circular saw with max. 3 m cutting length max. cutting width 0.5 m Kedpfx Aswumwfopmolw max. cutting height 100 mm motor 12 kW total length 5.8 m total width 1.55 m

Condition: good (used), Year of construction: 2011, beautiful rip saw with max. 8 m cutting length max. width 1.9 m max. cutting height 160 mm motor 11 kW with laser for cutting joint display with integrated pressure beam Kljdewrb Ruepfx Apmow