Used Miter saws for sale (70)

Condition: new, Year of construction: 2025, crosscut and miter saw type: ZS 200 N - 5 KW motor Godpfxei Dfide Aacouh with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1993, Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm Gusdpfxstxkprj Aaceh -Saw units: 45° pivotable -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Bundle saw with chain conveyor for direct discharge into container, spare parts available Godpfoxgr R Ssx Aacsuh

Condition: good (used), Code: 0110 Brand: OMS SALVARANI Model: FC 350 R - CE Standard Crosscutting machine with base frame for wood, aluminium, PVC, plastic, etc. - CE Standard Technical data Blade diameter mm 350 Three-phase motor Watt 2800 - Rpm 3000 Cutting capacity height mm 145 Cutting capacity width at 45 degrees mm 113 Cutting capacity width at 90 degrees mm 160 Base complete with suction Overall dimensions mm 800 x 600 x 1500 h Weight kg 90 Guedpfxjwhffzj Aacsh

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 5613, panel saw with diamond blade in good condition Gedpoxnm U Uofx Aaceuh

Condition: excellent (used), Saw – miter saw Pertici Univer 40mm Blade diameter: 400 mm Blade bore: 30 mm Motors: 2.2 kW Max cutting width: 190 mm Max height: 110 mm Godjxmhf Sjpfx Aacsuh Two angle adjustments for cutting CE certificate DTR documentation

Condition: excellent (used), Sprossen punching machine 12 mm Used, in top condition Gusdpjw Hlztjfx Aaceh Manufacturer: Schleicher Sprossen knife 12 mm Right extension table with stop slider Required space approx. 1100 mm x 600 mm x 1100 mm Weight approx. 65 kg Storage location: 54634 Bitburg, loaded free, unpacked Handover in as-inspected condition, without guarantee or warranty

Condition: good (used), Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler Godpfx Aaoh U U S Rjcjuh -Manufacturer: Kaltenbach, double miter saw type DKL 500 -Cutting length: 245 to 4180 mm -Saw units: 45° pivotable -Saw blade: Ø 490 mm -Accessories: incl. Saw blades see photos -Total dimensions: 5130/1100/H1410 mm -Total weight: 1154 kg

Condition: good (used), Year of construction: 1996, Offer 25115 Technical Data: - Saw blade diameter: 400 mm - Saw blade speed: 3000 rpm - Cutting height up to approx.: 125 mm - Cutting depth up to approx.: 600 mm Guodpswn D Emefx Aacoh - Bevel adjustable on 2 axes - Table size approx.: W 800 x D 800 mm - Table height: 920 mm - Drive: 400 V / 1.5 kW - Space requirement approx.: W 800 x H 1900 x D 1100 mm - Weight approx.: 200 kg

Condition: good (used), Code: 0184 Brand: PEGIC - ITALY Model: GP 350 RT - CE Standard Professional mitre saw for precise cutting of frames, wooden profiles, beads, window frames, wood, aluminium, plastic, Pvc and various materials - CE Standard Gusdpfx Aasw Du Tyecoh Technical data Blade diameter mm 350 F 30 Three-phase motor Kw 2,2 Rpm 3000 Cutting capacity at 90° mm 160 x 110 Cutting capacity at 45° mm 115 x 115 Overall dimensions mm 850 x 600 x 500 h Weight kg 52

Condition: new, A twin blade saw that has been specifically designed for cutting glazing beads accurately to length, with either a straight or mitred cut. The machine has two work-levels one set above the other, allowing two lengths of beading to be cut simultaneously. The two lengths of bead are held secure during the cutting operation by the front pneumatic clamps. Setting the correct length is achieved by means of handwheel moving the left head in relationship to the fixed right head, the length is easily read from the mechanical digital display. Min/Max. cutting length 150mm - 2400mm Max. cutting section at 90° 55 x 100mm Guedpody Hqvjfx Aacjh Max. cutting section at 45° 40 x 100mm 2 x sawblades dia. 220mm x 30mm bore Motor 1.6hp, 3 phase CE Safety requirements

Condition: used, Double tilting vertical cutting machine Gusdpfx Aaowzamyjcoh

Condition: new, Year of construction: 2025, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Gedpfxok H Ic Uj Aacouh Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: excellent (used), Double mitre saw ALFAMACCHINE T350 CE Double saw for cutting at 45-degree angles Guedpexg Hx Djfx Aacoh Blade diameter: 350 mm Blade bore diameter: 30 mm Blade speed: 3000 rpm Motors: 2×1.5 kW Air requirement: 5-7 bar Cutting width: 15-80 mm Cutting height: 10-80 mm

Condition: ready for operation (used), functionality: fully functional, Crosscut Saw / Mitre Saw / Crown Moulding Saw Manufacturer: Hüllhorst Model: KLS Swiveling crosscut saw, previously used for profile strips and crown mouldings. Maximum infeed length: approx. 4,000 mm Outfeed table length: 3,000 mm Maximum cutting cross-section: approx. 160 x 110 mm (W x H) Infinitely adjustable swiveling range, +/-45 degrees Saw motor: 4.4 kW Speed: 120 – 4,200 rpm Maximum positioning speed: approx. 60 m/min 2 x 80 mm extraction ports Control: Ferrocontrol Godpjxbnqdofx Aacouh Cutting accuracy: +/- 0.1 mm Dimensions: approx. 9,000 x 1,300 x 1,500 mm (L x W x H) Machine fully checked and cleaned. Among other things, a frequency inverter and a control unit have been replaced.

Condition: used, Year of construction: 1996, weight of the machine ca. ca. 1500 kg 1707 connected load frequency 400 V 230 V frequency 50 Hz Gedpfjupmv Ujx Aaceuh generator - rated current 8 A output 4 kw saw-blade dia. 400 mm ja

Condition: used, No. 04480 Cross-cut and mitre saw Graule ZS 135 N Used This machine type is used for cutting to length and for horizontal and vertical miter cuts, double mitre cuts are also possible Precise ball bushing guide of the tool slide on hardened and ground steel shafts Fast mitre adjustment up to 25° horizontally and up to 45° vertically Adjustable fixed stops at 90° and 45° Machine can be set to mitre in 2 planes Adjustable aluminum stop plates Sturdy cast iron construction Lower saw blade guard can be connected to extraction system 3 kW three-phase 400 volt brake motor (special equipment) Saw blade diameter 350 mm, Saw blade holder 30/40 mm, cutting height 135 mm, cutting length 430 mm, saw blade inclined at 45°: Cutting height 92 mm Gjdjw Htm Repfx Aacsuh Including saw blade for aluminum 350 mm diameter Including machine stand for type ZS 135 N Including roller conveyor RLK 3000 x 350 mm, with length stop with scale and material stop that can be folded back, roller diameter approx. 40 mm Transport dimensions machine approx. 1300x700x1700 mm LWH, roller conveyor approx. 3000x500x800 mm LWH Weight approx. 300 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Striffler Type 2750-E double-cut miter saw for precise miter and cross-cut cuts in wood profiles, moldings, and frames. The machine is ideal for series production in window, door, and furniture construction thanks to two pneumatically pivoting saw units and electronic positioning. cutting length: about 2,200 mm miter angle: 45° – 90° workpiece: max. 50x70 mm Further data: See PDF Gjdjw D Dfxopfx Aacsuh

Condition: excellent (used), Year of construction: 2016, 1 Up-stroke angle cross- cutting saw model UKA 600 with pneumatic stroke and clamping device Saw unit mounted on rotating table of diameter : 980 mm Saw blade diameter : 600 mm Cutting capacity : 165 x 240 mm 90 degrees Maximum cutting height : 165 mm at the Fence and 175 mm Diameter (at 90 degrees) for round material Cutting angles : 30 – 90 – 30 degrees 45 – 90 – 45 degrees with automatic function Motor power : 5.5 Kw Voltage : 400 Volt 50 Hz Working height : 920 mm 1 Tiger Stop 7.5 Automatic Stop and pusher Total length : 7.95 meter Working length : 7.35 meter Net working length (automatic saw) : 6 meter Voltage : 220 Volt 50 Hz Motor power : 0,45 Kw Feed speed : maximum 40 m/min (Depends on load) Précision : +/- 0,4 mm as pusher. Infeed-table for TigerStop 6.8 Total length : 7.4 meters Table width : 325 mm 1 Outfeed / infeed table with side fence Length : 3.7 meter Width : 325 mm Gjdexivhaopfx Aacjuh Right side pusher version (video for explanation purposes only) The machine is operated by push button for semi-automatic use or fully automatic for 90 degree angles controlled by the TigerStop. The rotation table is controlled by a Tigerstop Servo drive TigerDrive

Condition: excellent (used), functionality: fully functional, Graule ZS 135 Motor: 400 V / 2.0 kW Speed: 3800 rpm Cutting length: 430 mm (at 90°) Cutting height: 135 mm Mitre range, horizontal: 45°-90°-25° Saw blade diameter: 350 mm Extraction port: 100 mm Weight: 100 kg Guodpexf Hcmofx Aacjh

Condition: excellent (used), Hoffmann MS35-SF/S07.117 Double Mitre Saw Guodpfx Aew T R T Toacsh 45° angled cuts Saw motors: 4×2.2 kW Saw blade speed: 3,000 rpm Blade size: 350 mm, bore 30 mm Max working width: 80 mm Max working height: 80 mm Dovetail milling units: 2×0.5 kW Milling speed: 19,000 rpm Possibility to set two milling positions Working pressure: 6 bar CE certificate DTR documentation Weight approx. 800 kg Total machine dimensions with tables: 658×92×170 cm (H)

Condition: good (used), Year of construction: 2005, OMGA opti cut IDC000080 - Manufacturer: OMGA - Year of production: 2005 - including table before and after Godpfx Aaot D Dukjcouh - Control cabinet - Working condition

Condition: used, Miter saw, saw unit right left, double miter saw, cross-cut and miter saw, double end profiler Godpfegzc Iyox Aacjuh -Double miter saw: saw unit right and left from automatic saw, drill / mill Rapid DGL / BFA -Motor: Himmel 3.0 kW / 2790 rpm -Saw unit: swivels 45 ? -Saw blade: O 410 mm -Price / fee: complete -Dimensions: 1060/760 / H680 mm -Weight: 240 kg

Condition: used, Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable Gujdpfx Asgy Dbdsaceh -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg

Condition: used, Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler Gusdpfx Aaegylq Ijcjh -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 420 x 30 mm -Price/delivery: complete -Total dimensions: 1200/800/H690 mm -Total weight: 234 kg