The document holder directly on the control at eye level is practical.
The parts lists are fixed by a clamp. so you have a permanent overview of your orders.
Bnd2ifum
M62003
extra long saw bush suitable for PAUL KME 2 and BM, total length 485 mm, clamping length 425 mm, bore-Ø 60 mm, outside-Ø 75 mm, flange-Ø 120 mm, 2 keys, clamping nut with right-hand thread, with one fixing screw M16
Cidbsdtvrp
Second hand machine
Used circular saw feeder of the company Panhans type 76
year of manufacture: 1985
MNo.: 185
Cvr3fexc
Availability: short term
Location: Hochheim
Double-sided mitre fence DUPLEX
Year of manufacture approx. 2004
cutting to length up to 1350 mm
in very good condition from school use
Jyymde
for machines type F 45 year of construction from March 1998 with double carriage guides made of steel.
The DUPLEX fences allow angle cuts from 0 - 90° very fast,
precise and infinitely variable.
When set to 45°, the mitre can be cut on both sides of the workpiece without adjusting the two stops.
on both sides of the work piece without adjusting the t...
suitable for make Knapp-Felder and various.
used, good condition
Lachner brand
Type DGA 900
B22bmuhjgh
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without guarantee and warranty
new spacer rings of different thickness for PAUL KME 2 and BM, with bore 75 mm, new carbide tipped saw blades 300 Ø and 380 Ø x 75 Ø, new CV saw blades hard-chrome plated different Ø
B93kq0hsee
Spacer rings for A.COSTA saws / multi-blade saws or similar,
D = 100 mm, d = 80 mm, wedge = 14 x 5 mm,
B807xcnbz0
Widths: 2 x 5.3 mm / 2 x 9 mm / 1 x 15.5 mm / 1 x 17.5 mm / 1 x 25 mm / 1 x 29 mm / 1 x 30.5 mm / 1 x 35.5 mm / 1 x 39 mm.
Description:
For safely guiding narrow workpieces on table and sliding table saw machines.
The Aigner push stick is made of wood and is therefore environmentally friendly, easy to machine, protects the cutting edges and hands.
Scope of delivery:
1 x push stick with holding magnets
Chzpinumzw
for edger ESTERER DKL, DKB, DKE
B93kg9qypd
Spacer rings in various widths, bore 85 mm, fixed saw bush with right-hand thread Total length 160 mm, CV circular saw blades hard-chrome plated 300 Ø x 85 Ø
Spacer rings for A.COSTA saws / multi-blade saws or similar,
Cyqtzpsa
D = 100 mm, d = 80 mm, wedge = 14 x 5 mm,
B-goods with blemishes,
various widths,
total length approx.: 1.840 mm.
Description:
Chzphra27t
With two strong holding magnets, the deflector can be easily, quickly and securely fixed in any desired position on the machine table.
Scope of delivery:
1 x deflector
hydraulic feed drive units, fully reconditioned, stepless variable;
1 unit for KME 2 or BM - left execution - incl. additional pump
1 unit for KME 2 or BM - right execution - without additional pump
Cy32vfej
1 unit for K2V - left execution - without additional pump
Spacer rings for saws / multi-blade saws or similar,
D = 100 mm, d = 80 mm, wedge = 12 x 5 mm,
Cyw3cfwv
5 x 5 mm, 1 x 10 mm, 1 x 17.9 mm, 5 x 18.4 mm, 20 x 19.9 mm, 11 x 23.5 mm, 12 x 24.5 mm, tolerance +- 0.05 mm.
Description:
The Quickly can be fastened at any point over the entire width of a sliding block with a simple push of a lever.
The special function of the tips ensures a secure hold.
Rccvn
Place Quickly on the desired position on the pusher. When the lever is pushed forward, the front tips claw into the pusher from above and at the same time pull the rear tips into the front of the pusher
Scope of delivery:
1 x Quickly with special key
HM saw blades with HM broaches for deep cuts on multi-blade saws or similar,
Sgnc28xh
Quantity: 4 pcs,
As good as new, unused stock,
350 x 4,8/3 x 80,
diameter 350 mm,
bore 80 mm,
Keyway: 20 x 5 mm.
Spacer rings for A.COSTA saws / multi-blade saws or similar,
D = 100 mm, d = 80 mm, wedge = 14 x 5 mm,
Widths: 4 x 15.5 mm / 2 x 17.5 mm / 3 x 25 mm / 6 x 29 mm / 1 x 30.5 mm / 1 x 35.5 mm / 2 x 39 mm / 2 x 41 mm / 2 x 77 mm.
Iiwie9ojo
Spacer rings for saws / multi-blade saws or similar,
D = 100 mm, d = 80 mm, wedge = 12 x 5 mm.
1 x 13 mm, 35 x 16.1 mm, 26 x 19.2 mm, 25 x 21.1 mm,
Tolerance: +-0.1 mm.
Qebg2
Lot HM saw blades for circular saws,
as new or sharpened,
8 pcs,
Diameter: 370 - 380 mm,
width: 3-5 mm,
bore: 60 mm,
bolt circle: 100 mm,
Qfu8p
suitable for Holzma OPT HPP 350 or similar.
Spacer rings for A.COSTA saws / multi-blade saws or similar,
D = 100 mm, d = 80 mm, wedge = 14 x 5 mm,
Cyhvwgzc
Widths: 5 x 15.5 mm / 3 x 25 mm / 6 x 29 mm / 2 x 30.5 mm / 1 x 35.5 mm / 2 x 39 mm / 2 x 41 mm / 1 x 69.5 mm / 2 x 77 mm.
Sample sales contract for used machines in nine languages
Machineseeker still biggest sponsors of 2nd German football league
How to receive 100% of our e-mails
10 valuable tricks for buying used machines online
Olympic Games: Machineseeker sponsors Team Germany
Photo gallery: The World's 10 biggest excavators
Machineseeker Trust Seal
What is the Trust Seal?
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.