Used cut off saws for sale (40)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 48-2007-1403, cutting height (max.): 100 mm, saw blade diameter: 500 mm, table length: 5,000 mm, cutting depth: 320 mm, table width: 350 mm, TECHNICAL DETAILS Max. cutting depth: 320 mm Max. cutting height: 100 mm Max. saw blade diameter: 500 mm Saw blade bore: 30 mm Gksdpfszxcm Uex Acijb Table length: 5,000 mm Table width: 350 mm MACHINE DETAILS Voltage: 400 V Main motor power: 5.5 kW Power: 5.5 kW Current consumption: 10.3 A Fuse rating: 16 A Dimensions & Weight Dimensions (L x W x H): 9,000 x 1,070 x 1,420 mm Weight: 1,500 kg Transport packages: 3 units EQUIPMENT CE marking

Condition: used, total width: 1,000 mm, total length: 1,400 mm, total height: 1,700 mm, Colour: Grey Weight: 200 kg - Documentation available: No - CE certificate present: No - Serial number: 165359 - Main motor power [kW]: 2.9 - Max. cutting height [mm]: 110 - Max. cutting width at 90° [mm]: 110 - Max. saw blade diameter [mm]: 350 - Saw arm tilt angle [°]: 165 - Saw blade tilt angle [°]: 90 - Voltage [V]: 380 - Current consumption [A]: 5 - Fuse [A]: 16 Gkedszavq Dopfx Acijb - Power [kW]: 2.9 - Transport dimensions: 1400mm x 1000mm x 1700mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2019, Year of manufacture: 2019 Includes saw blade Multiple units in stock 230 volts Godszyzcwjpfx Aciekb Condition: Used, in good condition Price: € 150,- including VAT

Condition: like new (used), Year of construction: 2022, operating hours: 30 h, Type : OPK 5800 -h / OBC5800 = same machine Min - Max lenght : 800 - 5800 mm, with infeed system. Thikness : 75 - 100 mm Width : 75 - 150 mm Speed : Block lenght 75 mm = 45 blocks / min Engine size : 7,5 Kw Electric cabinet with PLC touch screen. For Pallet blocks or similar. Only 30 operating hours, like new all over. Gsdszz Hunepfx Acijkb

Condition: new, CNC Panel Saw Wehrmann WT-38/1040 New machine For the conventional cutting of workpieces made of wood/wood-based materials with laminate (CLP, HLP), paper, foil or veneer Panel dimensions + data (finished panel): Length: from 140 mm Width: min. (finished dimension) 38+38 mm Width: max. (finished dimension) 520+520 mm (asymmetrical cutting is possible) Thickness: 8 mm - 40 mm Weight: approx. max. 30 kg Workpiece shape: rectangular Basic structure: - User-friendly combination machine with adjustable zero line - All drives and adjustments are servo-controlled - The machining motors are frequency-controlled. - Stable steel welded construction - Workpiece transport is carried out by means of a transport belt and height-adjustable top pressure. Base machine: - Sound-absorbing/protective hood with safety interlock - The required connection nozzles for an external extraction system with an air velocity of min. 28 m/sec. (underpressure 2480PA) - A compressed air connection incl. maintenance unit. - Integrated control cabinet with cooling unit for operating the machine at an ambient temperature of 10 - 45 degrees Celsius - PC control Beckhoff - Safety and protection devices according to CE guidelines - CE marking Feed rate v= 5 - 40 m/min servo-controlled drive Electronic height adjustment of 5 - 45mm adjustable via Beckhoff servo axis Stop ruler made of Teflon on the right side of the machine adjustable via Beckhoff servo axis Infeed ruler on the left with pneumatically sprung unit adjustable via Beckhoff servo axes Godpfxezvdw Ns Aciokb Machine equipment: Unit 1: Slitting saw, frequency-controlled Milling stand with column guide and connecting plate Motor Perske 4.4 KW 50 Hz 400 Volt 4500 RPM. Tool holder D = 35 keyway External + internal thread right / left, controllable via servo drive, operating in the same direction, not swiveling with height adjustment via Beckhoff servo axis Lateral adjustment with mechanical digital display Saw blade max. 350 mm without tools Flow-optimized extraction hoods Unit 2: Saw motor, frequency-controlled Milling stand with column guide and connecting plate Saw motor not controllable, operating in the opposite direction Motor Perske 6 KW 50 Hz 400 Volt 5000 RPM. Tool holder D = 35 wedge shaft with external + internal thread right / left Saw blade max. D400 mm without tools with manually adjustable splitting wedge with height adjustment via Beckhoff servo axis Lateral adjustment with mechanical digital display Flow-optimized extraction hoods Beckhoff control technology - PC-based control system with integrated PLC and electronic path control - Virtually unlimited program memory - Operation via keyboard / mouse / touch - Reporting system for operator and error messages - MDE Basic for recording machine data, production time, set-up time, downtime, fault time, quantity and adjustable recording period - Fast data exchange between control and I/O component via EtherCat - Uninterruptible power supply for panel PC - Feed lock for adjacent machines or transport - Powerful panel PC with integrated 15.6 inch display with touch screen, integrated keypad, keyboard and mouse - USB port - Fast EtherCat interface (field bus) - Ethernet network connection RJ45 - Operating system Windows with TwinCat 3 system for real-time control

Condition: used, Year of construction: 2012, - Cutting width 2200 mm - Equipped with an IR pre-heating zone and cooling unit Film cutter Manufacturer: HSM Maschinentechnik Godpfx Ajzuy Areciskb Type: ABW - ROTA - 2200 Year of manufacture: 2012 Technical data - Cutting width 2200 mm - Equipped with an IR pre-heating zone and cooling unit - Front: semi-automatic roll change - Rear: individual sheets are automatically stacked on a pallet Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1989, Pull saw Manufacturer: Stomag Gksdpfjzuym Dox Acijb Type: RS90 Year of manufacture: 1989 Technical data - Infeed roller conveyor: 3000 mm long, 400 mm wide - 4 HP motor - 3000 RPM - Outfeed arm: 1240 mm Note: The technical data and descriptions are a transcript of the original order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, Automatic circular saw machine Manufacturer: Kasto Type: KASTOspeed C9 Year of manufacture: 2008 Technical data - For sawing steel and non-ferrous metals - Test machine, used very little. - Cutting direction 90°. - Saw blade diameter 250, 285 and 315 mm. - Cutting range approximately 15-90 mm or 15x15-80x80. Gsdpfx Acszuymksijkb - Power of drive motor for saw unit 11 kW (special equipment). This enables cutting speeds of 50-700 m/min, among other things. - 2 separate and independently selectable tanks for minimal lubrication. Accessories: - Angle magazine, loading length 6000 mm. - Material trolley with drawbar. - Portal crane, maximum load 1000 kg. - Oil mist extraction system. - Chip conveyor. - Chip tipping container with rollers. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2004, condition: used, High-performance band saw Moehringer / Braun Canali Type multi-line TB 1250 MF-20 Roller diameter 1250 mm Roller width 150 mm Saw blade speed: 28-50 m/s Connected power: approx. 45 kW Feed rollers 2 x 4 Roller height 200 mm Cutting height up to the lower edge of the pressure guide: 400 mm and higher Cutting width 250 mm to the left of the saw blade and 250 mm to the right of the saw blade with center cutting device complete technical documentation Gjdpfxodfcv Ij Aciokb Original photos will follow

Condition: excellent (used), Catalog number: 7938 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - top pneumatic pressure - blade guard - pneumatic blade extension - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 7.5kW - dust extraction nozzle diameter: 120mm - table dimensions (length/width): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table with guide: 2050mm - outfeed roller table: 1650mm - roller table height: 900mm - roller table width: 510mm - overall machine dimensions (length/width/height, without table): 1200x640x1280mm - weight approximately 500kg ADVANTAGES - Made in Poland - Original DTR documentation - 2 roller tables - Pneumatic blade adjustment - Used saw, very good condition Net price: 14500 PLN Net price: 3455 EUR, depending on the exchange rate of 4.20 EUR Gsdpfozrxgdex Aciokb (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Catalogue number 7937 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - top pneumatic clamp - blade guard cover - pneumatic blade feed - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 5.5kW - extraction port diameter: 120mm Gjdpfx Ajzrnt Hecijkb - table dimensions (LxW): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table with guide: 2050mm - outfeed roller table: 1650mm - roller table width: 510mm - overall machine dimensions without table (LxW xH): 1200x640x1280mm - weight approx. 500kg ADVANTAGES – Manufactured in Poland – Original technical documentation (DTR) – 2 roller tables – Pneumatic blade stroke – Used saw, excellent condition Net price: 14,900 PLN Net price: 3,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to exchange rate fluctuations)

Condition: used, Year of construction: 2003, Maximum pushing speed 120 mt/min Blade diameter 500/550 mm Worktop height 900+-20 mm Compressed air consumption Gksdpfxozqg R Ie Acieb 1200 nl/min 6 atm Minimum installed power 10 kW Suction air velocity 2000 m3/h 45 mt/sec Output with 8 ejectors

Condition: new, Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Ground table “Flexam” belt feeding for the best performance 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during feeding and cutting Oleo-pneumatic tensioning of the blade for better cutting performance Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting Internal/external lubrication of the blade to remove residues of resins and chips 4 dust extraction to optimize the suction of dust and chips Cutting height of 400 mm (500 mm optional) Cutting width up to 400 mm High quality powerful motor kW 15 (HP 20) Ethernet connection for on line service Carbide or stellite blades for best cutting performance DM of saw wheels mm 800 Max. cutting height mm 400 fixed working table mm 1290 x 800 Gkodpfx Acjdcd Dljisb Max. saw blade width mm 54 x 0,9 Max. & min. saw blade length mm 5530 / 5380 motor Kw 15 (HP 20) suction connection nr 2x Ø 120 & 1 x Ø 100 compressed air requirement bar 6/ 27 ltd machine weight Kg 880 feed speed m/min 0 - 30 height of feeder belt mm 300 length of feeder mm 750 feeder roller DM mm 160 Max. feeder opening mm 200 Max. fence opening mm 200 feeder speed var. mt/ min 0-30

Condition: used, Year of construction: 2021, Year: 2021 Dimensions: 107 cm 230v Motor: 2,2 kw SERIAL NR: 18/3 51753 Good condition. More in stock! Price: € 450,- incl. VAT Gkedpfx Acezqhqceiob

Condition: excellent (used), CATALOG NUMBER 7678 TECHNICAL DATA - Guide bar length: 1670 mm - Cutting length: 1500 mm - Automatic lubrication of the cutting system - Damping and tensioning system in the head Godpfx Aszulkzjcijkb - Manual feed of the guide bar - Electric motor: 7.5 kW - Transport dimensions (L/W/H): 1650x900x2350 mm - Total weight: 240 kg ADVANTAGES – Austrian manufacturing – Suitable for cross-cutting packs or round timber – Unpainted – Mobile, on wheels – Used saw, very good condition Net price: 25,900 PLN Net price: 6,160 EUR depending on an exchange rate of 4.2 EUR (Prices may change with greater fluctuations)

Condition: excellent (used), Catalogue number 7386 TECHNICAL DATA - max. saw blade diameter: 500mm - spindle diameter: 30mm - hydraulic clamp serves as blade guard - hydraulic blade stroke Gkedpsztzcwefx Aciob - max. cutting width: 550mm - 4 sliding rollers in the table - top feed roller, toothed and pressure type - max. cutting height (in the centre): 100mm - main motor: 5.9 kW - extraction port diameter: 100mm, 120mm - table dimensions: 700x630mm - table height from base: 830mm - infeed roller table - roller diameter: 350mm table size: - length/width: 4480x700mm - motor: 0.75kW - outfeed table (belt) - belt width: 510mm table size: - length/width: 3130x800mm - motor: 0.75kW - machine dimensions (L/W/H): 890x910x1200mm - total weight approx.: 900kg – Infeed and outfeed table – Hydraulically adjustable blade – Used saw, in very good condition Net price: 24,900 PLN Net price: 5,930 EUR based on 4.2 EUR rate (Prices may vary with greater fluctuations)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 15600600437, cutting height (max.): 130 mm, cutting width (max.): 470 mm, saw blade diameter: 550 mm, empty load weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting height: 130 mm Max. cutting width at 90°: 470 mm Max. saw blade diameter: 550 mm Saw blade tiltable up to: 45° MACHINE DETAILS Main motor power: 5.5 kW Gkedpfx Aszdzmqociob Voltage: 400 V Current consumption: 12 A Fuse: 16 A Power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 1,700 x 1,600 x 1,700 mm Weight: 500 kg Transport packages: 1

Condition: good (used), Code: 0340 Brand: CIMAN - ITALY Model: MATA 450 - CE Standard Gedpfx Aoyv Il Hsciskb Automatic single-head crosscutting machine with double-angle for aluminium, complete with roller conveyors on the right and left – CE Standard Technical data: Blade diameter 450 mm Hole 32 Motor 3 Hp – Rpm 2800 Cutting dimensions : at 90° mm 90 x 190 mm - at 45° mm 90 x 125 Profile clamping, blade lubrication and feed are pneumatic Double rotation of the heads +/- 22,5°-45°-90° achieved by means of a pneumatic cylinder The cutting feed is adjustable by means of oil brake Complete with base and 2 side tables 3 metres on the left and 4 metres on the right with adjustable stop It is also equipped with a special protractor for cutting at intermediate angles Suction inlet diameter 100 mm Compressed air 6–7 bar Overall dimensions: Machine mm 1200 x 1500 x 1500 h - Left roller conveyor mm 3000 x 200 - Right roller conveyor mm 4000 x 200 Overall dimensions for transport: Machine mm 1200 x 1500 x 1500 - 2 roller conveyors mm 4000 x 200 x 300 h Weight kg 530

Condition: good (used), Code: 0001 Brand: DAN - LIST - DENMARK Gkedpewl Ihgsfx Acijb Model: MORSO Pedal-operated guillotine saw for 45° cutting of both sides of frames Technical data: Max width of the rod to be cut cm 10 Max height of the rod cm 16 Length of the right supporting table cm 80 Pair of steel blades Height of support surface from ground cm 83 Measuring system with 3 millimetre scales Overall dimensions of assembled machine mm 1750 x 550 x 950 h Overall dimensions for transport mm 650 x 550 x 950 h Weight kg 90

Condition: used, Year of construction: 2016, total width: 900 mm, total length: 1,200 mm, total height: 1,600 mm, Colour: Grey Weight: 300 kg - Year: 2016 - Documentation available: No - CE certificate present: No - Serial number: 7/26 - Max. cutting height [mm]: 110 - Max. cutting width at 90° [mm]: 290 - Voltage [V]: 400 - Current consumption [A]: 6.5 - Fuse [A]: 16 - Transport dimensions: 1200mm x 900mm x 1600mm (l x w x h) - Transport weight [kg]: 300kg - Transport packages [pcs.]: 1 Gksdpfxeym Um Ds Acijb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total width: 800 mm, total length: 1,500 mm, total height: 1,500 mm, Colour: Grey Weight: 350 kg Price: On request - Details: - └ Description: Groove cutter - Documentation available: No - CE certificate present: No - Max. cutting height [mm]: 90 - Max. saw blade diameter [mm]: 230 - Transport dimensions: 1500mm x 800mm x 1500mm (l x w x h) - Transport weight [kg]: 350kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gkedoym Udvspfx Acisb Yorick Diebels

Condition: used, Year of construction: 1985, functionality: limited functionality, cutting height (max.): 180 mm, total width: 400 mm, overall weight: 6,000 kg, TECHNICAL DATA - Maximum cutting height: 180 mm - Track width: 400 mm - Shaft width: 370 mm - Shaft diameter: 60 mm - Maximum blade diameter: 300 mm - Blade bore diameter: 80 mm Godpezhicbjfx Aciekb - Minimum workpiece length: 630 mm - Maximum workpiece width: 600 mm From top: - Pneumatic clamping - Ratchets - Metal pressure roller, 2 units - Ratchets - Shaft with saws - Smooth pressure roller - Ratchets - Smooth pressure roller From bottom: - Toothed metal drive shaft, 2 units - Ratchets - Track - Shaft with saws - Track - Continuously variable feed rate adjustment via inverter - Main motors: 2 x 55 kW - Feed motor: 4 kW - Hydraulic body lifting (up/down) - Hydraulic shaft adjustment Saws - Pump motor: 0.37 kW - Centralized lubrication - Suction port diameters: 1 x 300 mm, 1 x 380 mm - Dimensions (length/width/height): 3200 x 2350 x 2000 mm - Weight: approx. 6000 kg - Two axles

Condition: good (used), - power supply - 230 V - motor power - 0,92 kW, 1,25 HP - rotational speed - 2850 rpm - blade diameter - 250 mm - disc bore diameter - 30 mm - shield for the disc - cutting height - approx. 70 mm - cutting width - approx. 440 mm - arm length - approx. 660 mm - arm angle adjustment +/- 90° - blade angle adjustment 0°-90° - arm height adjustment Gsdper A Anqofx Aciekb - blade adjustment in vertical axis +/- 90° NO DISCS FOR DISCS

Condition: new, Year of construction: 2024, machine/vehicle number: MR005970, Perfect cutting 200mm high! In double miter and with a fixed zero point. When the machine is mitered, the saw blade continues to enter the material at the same point. Technical specifications: - Fixed zero point: Yes - Miter angle: 45-90-25 ° - Tiltable: Yes Gjdpfsvzl Scox Aciokb - Tilt angle: 60-90-30 ° - Maximum cutting length: 420 mm - Maximum cutting height: 200 mm - Maximum saw blade diameter: 520 mm - Weight: 310 kg - Saw blade speed: 2800 /min - Motor power: 7 hp - Serial number: 2024/95/5

Year of construction: 2001, condition: used, Multi-blade cut-off saw with 4 saws. Gkodoiw El Uspfx Aciob