Used Complete Sawmill for sale (10,550)

Condition: excellent (used), functionality: fully functional, Sawmill for sale in Belgium Location: Belgium Application: Suitable for processing hard and soft wood Condition: Technically in excellent condition Included in the price: All machinery, auxiliary equipment, spare parts, and saw blades 🔧 Main lines of the plant 1. External loading and first cut • 25 m chain infeed conveyor for logs • Holtec ES 120 cross-cut saw (Year of manufacture: 1995)  - Max. cutting diameter: 1200 × 600 mm  - Saw chain type: Chain saw  - Motor power: approx. 11–15 kW • Cassel Metal Shark Octa metal detector  - Eight-sided opening, DSP technology, suitable for bulk material • 5 m long discharge roller conveyor 2. Internal wood processing • E. Gillette Europe automatic log infeed  - Length: 3.6 m / Diameter: 400–1200 mm Gislhowh U Dmjcdwxot  - Capacity: 30–60 logs/hour  - Driven by electric and hydraulic units • Brenta PN 1600 band saw (2014)  - Roller diameter: 1600 mm  - Capacity: Logs up to 1200 mm in diameter  - Belt width: 100–160 mm  - Automatic infeed/outfeed with conveyor belt • Elmed ARGUS 3 metal detector  - Tunnel design with divisible opening  - Suitable for three-shift operation • MEM Cobra 60/650 prismatic edge milling machine (2000)  - 2 active saw shafts, 2 × 55 kW motors  - Max. cutting height: 120 mm / Width: 600 mm  - Automatic infeed and roller discharge 3. Shredding and removal • Vecoplan VTH 65/25/5/U Industrial Shredder (2017)  - Inlet: 650 × 250 mm / Power: 55 kW  - Capacity: 1–5 tons/hour • Vecoplan VR 65/24 Vibrating Table  - Surface: 650 × 2500 mm  - For even feeding to the shredder • Vecoplan KKF 500-1K-U Scraper Conveyor  - Conveyor width: 500 mm  - Suitable for wood chips, sawdust, and pellets 4. Automatic Cutting and Sorting • Kallfass RA4000R Automatic Cutting System (1995)  - Max. cutting diameter: 150 × 300 mm  - Length up to 4000 mm • MEM IMRPC Multi-Blade Saw (1991)  - Up to 14 saw blades / max. cutting height 160 mm  - Automatic feed, robust industrial design • Kallfass stacking system (1999)  - Automatic stacking with spacers  - Max. log length: 2.5 m 5. Additional machines • Flexiever Mini Screener (2020)  - Capacity: 5–10 m³/hour  - For compost, sand, wood chips • VOLLMER CHC 20 H circular saw grinder  - Saw blade diameter: 80–700 mm  - Grinding angle: -20° to +30° • Bammesberger FBA2 surface grinder  - Grinding length: 400 mm / Width: 140 mm • Ingersoll Rand ML30 screw compressor  - Power: 30 kW  - Air flow: 4.55 m³/min (7.5 bar)  - Operating hours: 43,198 h 6. Extraction system • APW fan – 18.5 kW, built in 1998 (2 fans) • Lysair fans – built in 1995 and 2020 • 2 cyclones with rotary valves • Purpose: Efficient extraction of dust, chips, and fine dust 🔍 The sawmill can be viewed in Belgium by appointment. All equipment is ready for operation and ready for immediate use. Ideal for industrial wood processing or as a complete investment. _____

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, Woodmizer SLP line and extraction system with log turner infeed fully operational video shows complete line with crosscut. £80,000 plus VAT cost over £250,000 just for the sawline. Contact me for any futher information. Gelhcdjyub Ahewxeit

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, cutting length (max.): 5,000 mm, cutting height (max.): 50 mm, cutting width (max.): 300 mm, Equipment: documentation/manual, We offer this very good Brodbaek BCO Edger Infeed Conveyors for sawmill (stationary), year of construction 2012. Manufacturer: Brodbaek Model: BCO Edger Year of manufacture: 2012 Dimensions before Edging: Width minimum: 75mm Gelhcdwsyw Sx Hjxeit Width maximum: 300mm Thickness: 15mm – 50mm Length: 2.1m – 5.0m Dimensions After Edging: Width minimum: 75mm Width maximum: 200mm Thickness: 15mm – 50mm Length: 2.1m – 5.0m Waterfall conveyor • Including sub frame for the waterfall conveyor • Height adjustable legs to ensure ease of installation • Designed to singulate the boards • Reject board facility • Dogs designed to pick up 16mm - 38mm thick boards, • Waterfall works automatically with sensors • High Quality Conveyor Chain • Rotating arm to knock off 2nd board as it travels up waterfall • Board singulation controlled automatically by 2 sets of arresting fingers • Accelerate the board • High Quality Conveyor Chain • 12 Sensors from above to measure wane on the boards, • Rollers to ensure the board is fair ended Infeed Kick in chain - all pieces centralised to the infeed chain

Condition: used, Year of construction: 2000, functionality: fully functional, all sawmill equipment: head saw, edger, roller conveyor, extraction system, sharpening machine, four-wheel drive forklift. Gislhjydvpzjcdwxst

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Esterer full-frame saw, model HDS 600, year 1990. Passage width 735 mm, stroke 600 mm. Includes switch cabinets, operator control panels, and drive motor. The machine fits on the foundation of the HDS 700. Can be inspected at Scheibner GmbH, 36110 Schlitz. Gislhjrmmqzocdwxst

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: EWD DWK T-4, Log infeed Reducer Giolhcdwsy Ivumoxot Debarking Block conveyor EWD ZE infeed table Microtec 3D measurement Spaner FZ3 Roller unit EWD EVW Flexible double-shaft circular saw EWD DWK 700 T-6 6 flexible saw axes Cutting height 60-340 mm 2x200 kW Complete Siemens S7 control system, year 2014 Complete hydraulics/control cabinets

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, cutting length (max.): 8,000 mm, overall weight: 13,000 kg, total length: 15,000 mm, saw band length: 9,045 mm, saw band width: 160 mm, wheel diameter: 1,250 mm, Horizontal Band Saw WRAVOR WRC 1250 AC High-performance industrial saw with 55 kW motor — for cutting logs up to diameter Ø 1250 mm Year of manufacture: 2018 General Remont: 2026 Technical Specifications: • Main motor: 55 kW • Fixed command board on sawhead • Control: fixed control panel with Unitronics V-280 PLC • Manual adjustment of cutting thickness possible • Track length: 12.5 m • Hydraulic log clamps: 5 X • Hydraulic rollers: 5 X • Angles (90°): 5 X • Standard log turner: 4 X • Outfeed silon conveyor belt for board transport Gjlhcdwjy Rmx Ijxsit

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 Golhcdeyzr Tfowxsit - 1 double edger Paul KME 2 / 750 R, year of construction 1988 With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: good (used), Year of construction: 1994, Complete sawmill: Loading system + bandsaw 1100, blade 130 mm + hydraulic log carriage model EO 700 + 1 outfeed Golsy Iuuxshcdwxeit

Condition: new, Technical specifications: Length: 6 m Length of cut log: 1000 – 4200 mm Main motor: 7.5 kW Diameter of processed log: 1000 mm 600 mm band saw guide wheels Frame made of 160 mm C-profile Band saw length: 4800 mm Band saw width: 40-50 mm Electric up and down drive Feed via a gear motor, continuously controlled by an inverter Support arms x 5 Saw hoist: Hydraulic ADDITIONAL EQUIPMENT Hydraulics: Log loading x 1 Drag arm team Log leveling system x 1 Log press x 1 Chain turner x 1 Hydraulic power unit: 4 kW Optional equipment: Board drop system Microprocessor cutting thickness controller ISP-10 Bark cutter/debarker Bed extension Motor: 11 kW 15 kW / 18.5 kW Electric roller Additional manual pressure Driver's seat Operator platform Desktop-stationary Additional hydraulic components / Log press / Chain turner / Powered leveling / Leveling / Loading Double-sided head lifting chains 2x16B Gjlhcdwjwavqlsxeit Hydraulic accumulator Water solenoid valve Extendable support arms Loading ramp Head drive from two sides

Condition: used, Year of construction: 1986, functionality: fully functional, We are offering this used Brenta Vertical Band Saw with automatic turning carriage. Year of manufacture: 1986 Gelhoyxhq Uscdwxjit Vertical saw: Type Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type Progress 750 Machine no.: 409621 S268 N1143886 Maximum cutting length: 12 meters In the various photos, you can see: - overall view of the saw - saw machine nameplate - saw with extraction pit - automatic line behind the saw - pit under the lower wheel - infeed line from outside - infeed line as seen from inside - outfeed line inside - extra hoisting bracket to resaw pieces. This bracket can return the log onto the carriage with a chain - collection bin behind the outfeed line - collection bin seen from the other side. With red button operable both here and from the machine room - overview of the outfeed line - machine plate of the saw carriage - saw carriage in the outer position, where the log can be loaded - control room behind the saw - control room interior. Electronic measurement setting and control of all infeed and outfeed lines - wall-mounted electronics across from saw. Control current with relays, which can also be operated manually - Atlas Copco GX 11 FF compressor - Compressor nameplate, year of manufacture 2005 - Grass Air DW 31 air dryer - Stellite adjustment blocks for the guides where the saw blades run through Technical information: - The machine must be supplied with air, hydraulics, and electricity (including control current) - The wheels (upper and lower) were ground approximately three years ago and can last for many more years. - Infeed conveyor control cabinet was renewed in 2025 - At the end of the infeed line, there is a crosscut saw which can trim capping, planks, or beams. This can be set electronically for thickness adjustment. This Brenta vertical band saw with automatic turning carriage is an excellent combination. The listed price is based on the EXW Incoterm, with dismantling by the buyer. If you have any questions or require further information, please feel free to contact us or give us a call.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, AUTOMATIC VENEER SPLICER Flat Maximum prism width 700 mm Maximum prism height 850 mm Maximum prism length 4.2 m Main drive motor 55 kW Danfoss frequency converter for the main motor Main wheels - cast iron - rubber in the middle Main wheels - width 100 mm Diameter of main wheels 1050 Lifting/lowering of the splicer spindle Motor power for lifting/lowering 4 kW Double-sided saw - PV 45, length 7470 mm, thickness 1.2 mm + stellite, width 140 mm Electronic infinitely variable feed of the splicer forward and backward with Danfoss frequency switch 1.5 kW+W63 Digital setting of dimensions with automatic cutting program V-280 - veneer program Hydraulic 40l tank with 13l pump and 4 kW electric motor Complete hydraulic pipes Automatic hydraulic tensioning of the saw + accumulator Hydraulic guide for the saw blade on the left - linear veneer guide + automatic retraction below 100 mm Hydraulic guide for the saw blade on the right - linear veneer guide + automatic retraction below 100 mm Hydraulic arm for pushing lamellas back Additional arm for adjusting lamella pushing Separate control panel from the splicer Gijlhcdwoy R Tcmexjt 8-button 4-position joystick 8-button 2-position joystick + potentiometer Laser 15 mW with holder Camera on the splicer from the front (view of the prism) and start of cutting Automatic water cooling of the saw blade up and down, with water filter, high-pressure water pump Opening for dust extraction - from the front + connection Ø 250 mm Fan 5.5 kW + dust extraction pipe Ø 250 m Central lubrication + automatic electric Wider wheels for feed of the splicer forward and backward and additional protection of switches and track cleaner Welded reinforced track 8500 mm Hydraulic clamp with two cylinders and wedges for prisms 4 pcs Hydraulic lifting/lowering of wedges 4 pcs Hydraulic lifting with automatic roller for prism feed 4 pcs Total lifter 1 pc Hydraulic corner - centering device 3 pcs Turner 3 pcs Automatic output belt SILON 4 m with 1 m extension, + electric motor 1.5 kW - belt lifts and lowers automatically Mechanical roller conveyor for veneer l=4000 mm Inlet ramp (conveyor) for prisms

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, three-way table, 6 cross conveyors, log infeed, and much more. The sawmill line is fully operational. Customer service has been newly performed. The line is still in operation and can be inspected at any time. The price also includes approximately 100 saw bands for LT70/HR700 and 11 saw blades for EG800. Gisljyz Ia Ijhcdwxst Currently, the HR700 is not in use and is in storage. The HR700 is fully operational with only 30 operating hours. An alternative setup of the line with HR700 can be seen in the last picture. If you have any questions, I am happy to assist.

Condition: used, Year of construction: 2007, 4 profiling units VPF340 2x90 kW New subframe LINCK centering system VZM Gijloy Adl Nehcdwxjt LINCK extraction unit CSA

Condition: used, Year of construction: 1993, functionality: fully functional, We are selling our packaging timber sawmill: Gielhcdswbpi Dowxet - Esterer frame saw H30 - EWD step feeder - with stacking system - Costa Multiprisma (35), logs up to 6 meters - Costa double-shaft saw type Leopard - Zeno drum chipper - with numerous auxiliary machines The machines can be inspected on site by appointment if interested.

Condition: excellent (used), Year of construction: 2020, Complete sawmill for pallet lumber consisting of: 1. Log yard Häwa, with root reducer and Valon Kone debarker VK 90. Calibrated factory log input measurement system by Jörg. Sorting with 28 bins. Log length 2.0 - 5.0 m. Log diameter from 20 - 90 cm. 2. Sawmill: Möhringer band saw, running bandsaw with Flexi Drive carriage. Slab scanning unit. Round timber intake with step-by-step singulation. Laser measurement by Bidac. Kallfass cross-cut unit. Resaw: EWD Optimes with chipper canter and double arbor saw NKU. Brodbaek edger system. Stacking system for main products, empty pallet handling for both main and side products. Kuka robot for packing side products and main products, four dimensions possible. Complete mechanization, electric and electronic control cabinets, etc. Waste disposal. Gelhcox T Azwedwxjit Detailed plans or video can be provided upon request.

Condition: excellent (used), Year of construction: 2010, The following components of a Linck VM50 saw line are available: Condition of the machines is very good! Infeed device ZV21, model EV 50 (in stock) Profiling chipper ZD31, model VM50, 2 × 200 kW (in stock) Gijlhcdjy Hbxhjwxet Outfeed device AV31, model VZM (in stock) Centering device VZ21, model VZV (in stock) Log rotator DV21, model DV70-2 (in stock) Additional components: Infeed and centering device EVP – available from September 2026 Profiling chipper VM50, 2 × 200 kW – available from September 2026 Profiling aggregate VMP450 F61, 4 × 110 kW – available from September 2026

Condition: used, functionality: fully functional, Sawmill for sale: The line starts with a Bongioanni bandsaw and a Costa Multiprisma sawmill. Due to their design, they are suitable for processing both soft and hard hardwoods. The price includes the lines, additional machines (dust extraction, recycling machines) as well as the necessary saw blades and spare parts. The sawmill can be viewed in Cegléd, Hungary, by prior arrangement. Line 1: - 1-1 Log yard with single-sawn saw - 1-2 Costa Multiprisma: 280 two-axis prism saw with log turner, 60-80 m3/8 hours depending on the wood species and diameter - 1-3 Roller conveyor with discharger Gielhcdov Hm T Sewxot - 1-4 Custom-built cross-cut saw: for single-size cutting, with size adjustment option. - 1-5 Conveyor belts for transporting lump waste. - 1-6 Grinder (drum) - 1-7 Grinder conveyors: screw conveyor, bucket elevator, chute, direct loading onto wagon/truck 2nd line: - 2-1 Log store with splitter - 2-2 Log conveyor track, with drop-off - 2-3 Intermediate log store with splitter - 2-4 Bongioanni log splitting bandsaw and trolley, with 1300 digital control, multiple size presetting options, sheet deflection indicator, laser ruler, 25-45 m3/8 hours; depending on the type of wood, diameter and cut pattern - 2-5 Roller conveyor with ejectors - 2-6 Cross conveyor with singler - 2-7 Storti TGS-78 cutting saw: with digital control, three saw units for up to double the size of the cut - 2-8 Roller conveyor with graders - 2-9 Intermediate prism magazine - 2-10 Roller conveyor - 2-11 Costa Leopard II. series cutter, with 2-axis automatic feed and power control - 2-12 Roller conveyor with ejector and sorting table - 2-13 Conveyor belts for lump waste - 2-14 Grinder (drum) - 2-15 Grinder conveyors: screw conveyor, bucket elevator, rédlers (walking floor truck loading option) 3. Auxiliary machines: - 3-1 E. Gillet slitting band saw, associated conveyors, manipulator, feed mechanism - 3-2 Joiner's band saw (800) - 3-3 Pallet cube cutting machine (starboard) - 3-4 SOCOLEST Valdoi double edge circular saw, with conveyors, cutting circular saw - 3-5 VEB STANDARD single-axis formatting circular saw - 3-6 STVO single-axis formatting circular saw machine

Condition: new, Year of construction: 2025, High-performance industrial bandsaw Wravor WRC 1250 AC – robust, precise, and suitable for cutting large logs. Equipped with automatic control and advanced features for maximum efficiency! 📌 Key features: ✔ strong and stable construction ✔ high precision ✔ high cutting capacity ✔ automatic control ✔ reliable and robust construction ✔ main wheels made from cast steel, dobule bearing (STABLE CONSTRUCTION!), wheel diameter: 1250 mm, width 135mm Gelhcdoyz Taaswxjit ✔ length of saw blade: 160/180 DOUBLE-SIDED) L = 9045 mm ✔ motor power: 55kW -110kW, frequency converter optional Saw width: Approx. 4500mm (depending on equipment) Rail width: Approx. 2300mm (depending on equipment) Saw weight: Approx. 23,500 kg (depending on equipment, on length of chassis) Max cutting width (between guides): 1300 mm

Condition: refurbished (used), Year of construction: 2002, Sawmill ARTIGLIO Year - 2002 - ( Refurbished in 2023 ) Technical Details : - Flywheel - 1300 mm - Flywheel band - 168 mm - Max. blade length - 8860 mm - Three - Phase 400V 50hz Motors - Primary motor power - 55,8 kW - Blade tension motor - 0,55 kW - Pushing blade guidemotor - 1,5 kW - Flywheel inclination motor - 0,12 kW - Hydraulick brake unit motor - 1,5 kW - Central Crowing Equioment Consists : - 3 Log clamping pressure - Fixed hooks - Mobile knockers with 3 fixed positions - Hydraulicl log turner - El . divider with 50 works programs - Transversal vice movement with two speed motor 1,8 - 8 mt./min. Gislhcdjv Ny Nxswxjt - Hydrostaic advancement with steel cable towing - Comand pult - Automatic centralized rubrication - Pantograph for cable

Condition: ready for operation (used), Year of construction: 2003, Technical Details : Manufacturer - DINACO Model - FIL 1300 H / VEL 970 H Gijlhoyuu Abecdwxjt Wheel diameter - 1300 mm Wheel width - 165 mm Hydraulic guide Hydraulic scale Wheel tilt - motor Main electric motor P=55 Kw Input transporter 3x Output transporter Return ramp Automatic stacking Additional devices: Hydropneumatic perdrezač Chain wallpaper Hydraulic vertical cutter

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Logs Wagon - Trolley - BONGIOANNI Technical Details : Year - 1997 Wagon length - 7 m Number of staples - 4 Eqipment Consisits : Giolhorx Rq Ejcdwxot 1- Wagon - trolley 2. El. Cabinet 3. Comand pult 4. Hydraulic drive

Condition: new, Year of construction: 2025, functionality: fully functional, Professional WoodMizer LT70 sawmill, complete configuration, still packaged. The machine was delivered in April 2025 and has never been used. It was assembled by the manufacturer and is ready for operation. Gsleyr I Dmehcdwxjit

Condition: excellent (used), -1 Horizontal block bandsaw Hänni with tensioning carriage approx. 8 meters Roller diameter 1200 mm incl. accessories - Frame saw system Bögli, passage 700 mm - Tensioning carriage, hydraulic with auxiliary carriage - Split wedge Mara, driven Gslhcdsyr Dbuowxsit - Powered roller conveyor, length 6 meters / total length approx. 12 meters - Vollmer automatic gang saw sharpener - Manual setting tool for teeth - Sharpening machine for CV saws Vollmer - Waste carriage / 2 electric cranes and various accessories. Can also be dismantled at additional cost.

Condition: like new (used), Year of construction: 2021, Complete sawmill plant, including multilayer saw. Giolhey Icu Hocdwxot