5
veneer saw with pre cutting unit
front support table
back support table
pneumatic opening / closing of pressure beam
Beqmhjltwc
emergency stop button
cutting length 3100 mm
cutting height max ca. 55 mm
motor 2,2 kW, 400 V, 50 Hz
compressed air 5 - 6 bar
suction duct
suction requirement1500 m3/h
space requirement (L x B ) ca.: 4000 x 850 mm
weight approx. 450 kg
Advise used machines:
• Technical data without obligation, mistake and intermediate sale reserve.
• Price is considered ex-loc...
4
Veneer saw, veneer saw, joint cutting machine, fine cutting machine, fine cutting circular saw
Qkrh3pxdg
-Cutting length: 3000 mm
-with suction
2
used, good condition
manufactured by Scheer
type FM 5/ 3100 F
GS-approved
Bn0qwaqaor
motor 2,5 PS
cut length 3100 mm
pneumatic clamping
rip fence
front extented table
rear extented table
veneer strip fence with stop finger
self-exhaust
required space ca. 3800 mm x 1500 mm x 1200 mm
located in 97447 Gerolzhofen, free on truck, unpacked
sale in current condition as seen,
without guarantee and warranty
3
Used machine
Condition: Functional
Equipment and technical data:
Cutting length mm: 3,100
cutting height mm: 45
Fh72b72
Diameter saw blade mm: 180
Depth to fence mm: 500
Main motor kW: 1,8
Pneumatic clamp
rear fence
with suction
Weight approx. kg: 400
Location: Röllbach
Availability: short term
3
Veneer saw HOFER
Dwio8e
Schnittlange: 3500 mm
6
max. Schnittlänge : 3000 mm
Sägeblattdurchmesser : 160 mm
Spannbalkenbewegung : pneumatisch
Absaugkanal : Nein
Vorschubart : manuell
Bewegung Sägewagen : manuell
Maschinentyp : stationär
MaschinenNummer : 4 / 3336
Gewicht ca. : 350 kg
Abmessung : 3800 x 1200 x 1500 mm
Lagerort: Nattheim
Bcs8vpqrky
4
Type: FM 2 Condition: function tested, good (used) - cutting length 3100 mm - clamping beam actuation by hand wheel
Ospjf
5
Veneer saw, veneer saw, joint cutting machine, fine cutting machine, fine cutting circular saw
-Max. Cutting length: 3000 mm
-Saw blade diameter: 180 mm
-Speed: 2850 rpm
Qkofh0q32
-Dimensions: 3600/700/H1400 mm
-Weight: approx. 400 kg
1
used, good condition
manufactured by Scheer
Bn0kfwkd3w
type FM 8-3100
built in 1983
Masch.-No. 82248
GS-approved
front extented table
rear extented table
located in 97447 Gerolzhofen, free on truck, unpacked
sale in current condition as seen,
without revision
without guarantee and warranty
6
cutting length: 3050mm
Ctb2zcjgk
workpeace clamping: Handrad
suction connection: yes
1
Joining and fine cutting machine / veneer saw make SCHEER type FM 8 / 3100
Bq3nlzsusc
machine. # 72824
Technical data:
Cutting length 3100 mm
cutting height 45 mm
Saw blade dia. 180 mm
Feed manual
power requirement 1,8 kW
dimensions 3950 x 470 x 920 mm
weight approx. 400 kg
used, in good condition
3
max. Schinttlänge 3100mm
pneumatischer Spannbalken
mit Absauggebläse
Auflagetisch
Bdilup9eve
Lagerort: Garbsen
7
max. shaft length 3100mm
pneumatic clamping beam
with suction fan
supporting table with stop
Location: ex stock 54634 Bitburg
- free on truck -
Jiddlzz
5
Veneer saw, veneer saw, joint cutting machine, fine cutting machine, fine cutting circular saw
Be3vhsnwiz
-Saw blade diameter: max. 210/180 mm
-Speed: 1400/2800 rpm
-Drive: 380 V 2.94/3.67 kW
-Dimensions: 480/460/450 mm
-Weight: 56 kg
3
used, good condition
manufactured by Scheer
type FM2-3000
Masch.-No. 124276
motor 1,6 kW
saw blade diameter ca. 180 mm
hand wheel clamping
rear extented table 3000 x 600
Fq3daeb
required space ca. 3500 mm x 1100 mm x 1400 mm
weight ca. 400 kg
located in 97447 Gerolzhofen, free on truck, unpacked
sale in current condition as seen,
without revision,
without guarantee and warranty
6
cutting length: 3050mm
Bhwfq7ty9y
workpeace clamping: pneumatisch
Fence: ja
Veneer saw with 3100 mm cutting length , pneum. Pressure , Dimension: 3.80m long, 0.90m deep, 1.2m high Weight approx. 400 kg
Bruqeqcaal
1
Lagerort: Nattheim
Bc83xe20
2
Veneer saw 3m
from carpenter's dissolution because of retirement
Bnmxfikk
Machine ex location/foundation
6
Veneer Press Ott
Beyxv7sspq
2500 x 1300 mm
5
with joining planing aggregate
used, viel equipment
manufactured by Langzauner
type LZ 2-S/3500
built in 1991
Füge- veneer- and Plattenschneidmaschine in Kombinations-
ausführung Sägen-Fräsen
Schweright hand, massive basic machine with saw- and milling aggregate,
Anlifting and Absenken der beiden Werkzeugstationen about
Tastenbetätigung,
Betriebsarten-selector switch with automatic,
tool cart in gehärteten and geschliffenen Kugelumlaufbüchsen
geführt,
feed speed about gear infinitely variabl...
1
Gebr. Veneer - Fineblanking saw
Manufacturer: Langzauner
Type: LZ 2/3050
year of construction: 1986
cutting length: 3.050 mm
Support table rear 500 mm with mechanical stop
Support table front extendable
secondary milling unit
Bqzk0njmdn
suction channel
condition: used, functional
15
CATALOG NUMBER 5902
TECHNICAL DATA
- 3000mm cutting length
- pneumatic pressure
- max cutting height 25mm
- disc diameter 150mm
- disc hole diameter 30mm
- electric drive of the aggregate
- equipped with a table at the back
- dimensions of the table top 3000x790mm
- 2.5kW engine
- 0.12kW feed motor
- dimensions length / width / height 4100x1250x1440mm
- weight 596 kg
ADVANTAGES
- German production
- very good condition
- used saw
Net price: PLN 4200
Net price: EUR 966
Net price, calculated a...
5
max. Schnittlänge : 3020 mm
max. Schnitthöhe : 50 mm
max. Schnitttiefe : 750 mm
Sägeblattdurchmesser : 160 mm
Spannbalkenbewegung : pneumatisch
Tiefe vorderer Auflagetisch : 250 mm
Tiefe hinterer Auflagetisch : 750 mm
Anschlaganzeige : Meßuhr
Absaugkanal : Ja
Absaugung : externe Absaugung
Vorschubart : manuell
Bewegung Sägewagen : manuell
Maschinentyp : stationär
Gewicht ca. : 1500 kg
Nkx8v
Abmessung : 3700 x 1100 x 1300 mm
Motorleistung : 2.2 kW
Absaugdurchmesser : 100 mm
Lagerort: Natt...
5
Fuegesaege and fine-cut saw with rear tray
Cutting length of 3100 mm
Angle stop links
pneumatic workpiece clamping
2.5 HP motor power
HM type fine-cut sheet, dimensions approx. 3750 x 1000 x 1150 mm (Lxwxh). Weight 400kg.
Location: Camp 54634 Bitburg
3fe3nvpmr
6
Used veneer saw
Internal machine number: m2845
Manufacturer Scheer
Type FM 2-3100
Year of manufacture 1986
Ma. No. 80699
Speed 2,850 rpm.
power 1,85 kW
Weight approx. 380 kg
Item location: 58730 Fröndenberg/Ruhr
The machine can be inspected and tested under power.
A forklift/crane for loading is available.
There is the possibility of expert examination of the articles for sale on the spot. Specific questions should be clarified in advance. The information, such as technical data, dimensions, ...
3
second hand Scheer brand Type FM2-3000 Machine no. 113136 Motor 1.65 kW Cutting length 3000 mm Handwheel tension rear support table Space requirement approx. 3500 mm x 1200 mm x 1500 mm Total connected load approx. 1.65 kW Storage location 97447 Gerolzhofen, free on truck, unpacked Handover in the current condition as viewed, without overhaul, without guarantee and warranty
Z0nhyh09
2
Veneer saw Scheer
type: FM 5-3100 F
Iejjt9j
cutting length 3100 mm
pneumatic clamping
backside table with fence
integrated ventilator for dust suction
15
CATALOG NUMBER 5811
TECHNICAL DATA
- cutting length 3100mm
- max cutting height 40mm
- max cutting width 600mm
- max diameter of the disc 180mm
- max diameter of the cutter 180mm
Bjtndwnfdb
- smooth regulation of the feed speed
- total power 2.2kW
- front table
- rear table
- diameter of the extraction connector 60mm
- pneumatic pressure
- dimensions length / width / height 4500x1500x1400mm
- weight about 1000 kg
ADVANTAGES
- Italian production
- saw with undercutter (with cutter)
- very good...
3
max. Schnittlänge : 3020 mm
max. Schnitthöhe : 45 mm
Sägeblattdurchmesser : 160 - 200 mm
Spannbalkenbewegung : pneumatisch
Anschlaganzeige : Skala
Id3ovdeb
Absaugkanal : Ja
Absaugung : externe Absaugung
Vorschubart : manuell
Maschinentyp : stationär
Gewicht ca. : 1000 kg
Abmessung : 4500 x 1400 x 1200 mm
Motorleistung : 1.8 kW
Lagerort: Nattheim
6
Veneer saw machine manufacturer Scheer type FM 8-3100
Cutting length 3100 mm saw blade Ø max 180 mm motor 1,85 kW feed manual connection 380/50 Volt / Hz machine dimensions:
Length, 3750 mm width 1400 mm, height of 1300 mm, weight: 500 kg rear addition table
Bdfp0sx9zc
The trolleys do not belong to the machine
Location stock 54634 Bitburg
9
SAC veneer saw FS3100, pneumatic, with rear stop table, 1.8 kW, cutting length 3100 mm, front plate
Bdvc7lkshx
3
used
manufactured by Scheer
type FM 3
Masch.-No. 121169
motor 1,65 kW
cut length 3000 mm
saw blade diameter ca. 180 mm max.
hand wheel clamping
rear extented table
self-exhaust
exhaust connection D 130 mm x 100 mm, Sack fehlt
required space ca. 3600 mm x 1100 mm x 1500 mm
total connected power ca. 2,02 kW
located in 97447 Gerolzhofen, free on truck, unverpackt
sale in current condition as seen,
Bn0tahezkk
without revision,
without guarantee and Gewährleistung
1
4
Cutting lenght 3100 mm
Cutting high 45 mm
Sawblade diametre 300mm
98h8rhs9d
Motor power 3 kW
Blade speed 4000 rot/min
Air pression 6 bar
Weight 1100 kg
Cutting length 3100 mmp pneumatic pressure beam
Bfpaxfzcqc
8
PRICE IS NEGOTIABLE
Bgoedamj99
2
Veneer saw FM S-3100
Vsxoba
Manual clamping
1
used, cleaned, function checked,
partly revised
side guides renewed,
service unit new
manufactured by Scheer
type FM 2 3100
Masch.-No. 210 228
motor 1,8 kW
cut length 3100 mm
Gwttgs
saw blade diameter ca. 150 mm
pneumatic clamping
rear extented table
pneum. service unit
required space ca. l x w x h mm
3500 x 1000 x 1600
located in 97447 Gerolzhofen
sale in current condition as seen.
- free on truck -
4
In very good condition.
Bedgkhy9wm
6
Feed: hand wheel or electromotroic
Year of production: 1988
Cutting length: 3050 mm
Cutting height: 65 mm
Millling unit: yes
Diameter of saw blade: 160 mm
Depth of back gauge: 500/730 mm
Sawing motor: 2,2 kW
Milling motor: 1,1 kW
Adjustable front support table: yes
Ndhz9
Pneumatic pressure beam: yes
Rear table: yes
Back gauge: yes
Power consumption: 3.3 kW
2
4
I sell the veneer cutting saw with scoring blade SCHEER FM-10 4200.
Automatic cut, length max. 4200mm
Top pressure for material. Suitable for veneer and lamellas fine cutting.
Available immediately.
Cem0j9pq
2
used, good condition
manufactured by Scheer
type FM 8-3100
Masch.-No. 83077
motor 1,85 kW
cut length 3100 mm
saw blade diameter ca. 160 mm
pneumatic clamping
Bn0mwfhs7e
rear extented table
self-exhaust
required space ca. l x w x h mm
4000 x 1000 x 1300
weight ca. 450 kg
located in 97447 Gerolzhofen
sale in current condition as seen
- free on truck -
6
- Saw unit 2.2 kW (3 HP)
- Milling unit 1,1 kW
- Sawing length 3100 mm
- Double high-grade LM-linear guides
- Mechanic axial saw blade adjustment 0 – 2 mm infinitely variable
- Power supply in cable duct with plastic link track
- Cutting height 45 mm
Panabh
- Safety equipment
2
used
with rip fence
can also be used as
panel saw
manufactured by Mayer
type FS 3 - 3000
built in ca. 1980
mach. No. 1386
cleaned, function checked,
test run, shift valve new,
GS-approved
motor 3 kW
scoring saw-blade 0.75 kW
cut length 3,000 mm
saw blade diameter ca. 190 mm
pneumatic clamping
rear extented table
veneer strip fence with hand wheel adjustm.
exhaust duct
feeder with hand wheel
sep. scoring unit
pneum. maintenance unit
exhaust connection 100 mm
required space ca. l x w x h mm
4,700 ...
6
+ with automatic feeding
+ intuitive operation via Touchscreen
M9ejmoeww
+ saw unit 2.2 kW (3 PS) - invinitely variable height-adjustable on
two high precision ball-rail-systems
+ milling unit 1.1 kW (1.5 PS) - invinitely variable height-adjustable on
two high precision ball-rail-systems
+ cutting and milling height 45 mm
+ saw- and milling unit can be
lifted and lowered pneumatically
+ front support table pneumatically adjustable - width of support: 230 mm
+ guiding of the saw- and millingun...
2
used
manufactured by Mayer
type FS 3
Masch.-No. 1270
Lg9osicr
motor 2,2 kW
cut length 3500 mm
pneumatic clamping
front extented table
rear extented table
required space ca. l x w x h mm
4300 x 1000 x 1300
weight ca. 600 kg
total connected power ca. 2,2 kW
located in 97447 Gerolzhofen
sale in current condition as seen
Without repair work. Pickup at short notice.
- free on truck -
6
- 3100 mm cutting length
- milling unit
- rear support table
- digital position display / adjustment via hand-wheel
- gear rack balance on pressure beam
Btet03sd
- fence - pneumatically adjustable (autom. activated)
- Touch panel
- Front support table, pneum. adjustable
- Fence - pneumatically adjustable – 2 steps 600/900 mm