Used sliding table saws 1501-2300mm cutting length for sale (34)

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Price has just been reduced and will not reduce any further. Please only enquire if you want to buy it at this price before we scrap it as space is needed. Iijdpfsrubg Hsx Aa Ijc

Year of construction: 2022, condition: new, Altendorf WA 6 manual height adjustment, double roller carriage length 2000 mm scoring unit, swiveling, cantilever table, angular miter fence, automatic brake, lowerable below table height ----- Technical data ----- Swivel range: 0 - 45 °, cutting width at rip fence: 1.000 mm, max. cutting height: 87 mm, max. saw blade Ø: 315 mm, Swivel range miter fence: up to 49 °, Speeds: 4,200 rpm, Engine power main motor: 5.5 hp / 4 kW, motor power scoring motor: 0,5 hp / 0,37 kW, Working table height: 910 mm, suction nozzle Ø: 1 x 100 / 50 mm each, weight: 450 kg Large suction hood Location: Ex stock 54634 Bitburg - immediately available - Location: Ex stock 54634 Bitburg - free on truck - Iiedpfx Asihahmea Ioc - immediately available -

Condition: new, Year of construction: 2026, Cut-size circular saw with tiltable saw blade and high-quality sliding table made of anodized aluminum Cutting plane of the small-format circular saw directly on the roller table Precision-guided sliding carriage made of anodized aluminum, standard finish Large table arm guided on telescopic arm and longitudinally adjustable The standard table widening and table extension allow easy working with larger workpieces. The large dimensioned sawing unit made of grey cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground grey cast iron, therefore extremely robust and insensitive smooth running and precise cuts Aluminium sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic stop Extendable aluminium telescopic stop Angle adjustable With two professional folding fences Rip fence Standard with fine adjustment and quick clamping Scope of delivery: Table extension Table extension Anodized aluminium sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Iisdpfx Aascnxamo Iec Technical data table dimensions 1020 x 325 mm table height 900 mm working length 1660 mm Cutting height max. 90° with scoring 100

Condition: used, Year of construction: 1994, machine/vehicle number: 94-1-245, functionality: fully functional, Maximum blade diameter: 400 mm Maximum blade diameter with scoring blade: 350 mm Minimum blade diameter: 250 mm Ijdezavpaopfx Aa Ieic Scoring blade diameter: 120 mm

Condition: used, cutting height (max.): 145 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, rotational speed (max.): 3,600 rpm, rotational speed (min.): 2,800 rpm, total length: 2,000 mm, total width: 1,300 mm, total height: 1,500 mm, overall weight: 800 kg, No. 3276 Sliding table saw Kölle K 45 Used Sliding table length approx. 2000 mm Sliding table with swing arm and fence rail Max. cutting height 145 mm Max. saw blade diameter 400 mm Cutting width 1250 mm Speeds 2800 / 3600 rpm Manual saw blade tilting 0° - 45° Manual cutting height adjustment Table size 1180 x 1150 mm LW Adjustable upper saw blade guard Transport dimensions approx. 2000 x 1300 x 1500 mm LWH Weight approx. 800 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price Iiedpfx Aezbu Evja Isc To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Cutting plane directly on the saw blade Large-sized saw unit made of cast iron, double-mounted on the cast iron table – guarantees stability, precision, smooth operation, and long service life; 6-year HOLZKRAFT warranty on wear of the swivel segments Precision-guided format sliding table made of aluminum, anodized as standard 10-year HOLZKRAFT warranty on wear of the sliding table guide rails Parallel fence as standard with round bar guide and fine adjustment Large work table made of milled cast iron Smooth operation and precise cuts Standard table extension and table lengthening enable easy work with larger workpieces Extendable aluminum telescope fence with angle adjustment and two professional folding fences Iedpfxswb Eh Ns Aa Ijic Made in Italy Motor 4.0 kW - 400 V Saw blade tilt 90 - 45° Format sliding table length 1600 mm Table length 1020 mm Table width 325 mm Cutting width with parallel fence 700 mm Max. cutting height 90° = 100 mm Max. cutting height 45° = 79 mm Saw blade diameter 315 mm Saw blade speed 315 mm Max. crosscut width to the left of the saw blade 1660 mm Scoring saw blade diameter 80 mm Scoring saw blade speed 7600 mm Weight: approx. 276 kg Note! The parallel fence and table extension on the right are not visible in the pictures. Availability: short-term Location: Flörsheim

Condition: new, CATALOG NUMBER RE041 - New machine TECHNICAL DATA - Blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (operation only with ⌀300, 350 mm blade) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Main spindle speed 4000 rpm - Scoring spindle speed 8800 rpm - Blade tilt 0 – 45° - Max. cutting length 2000 mm - Cutting width with rip fence 1250 mm - Riving knife ⌀350 mm Ijdpfxozabgds Aa Ieic - Spindle flange diameter 87.5 mm - Table fence settable at 90° – 45°, accuracy ±1° - Max. cutting height with ⌀300 mm blade: 95 mm - Max. cutting height with ⌀350 mm blade: 120 mm - Top extraction port diameter ⌀80 mm - Bottom extraction port diameter ⌀100 mm - Weight 620 kg - Machine dimensions (L/W/H) 2255x3460x1450mm Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: like new (used), Year of construction: 2019, machine/vehicle number: 432.09.257.19, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, cutting height (max.): 133 mm, cutting width (max.): 800 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 5,500 rpm, rotational speed (min.): 3,500 rpm, year of last overhaul: 2022, Equipment: CE marking, documentation/manual, very well maintained, still in daily use. Iiedpfey Ucp Rox Aa Iec

Condition: good (used), Martin panel saw Sliding table: 170 cm Iedpfxjy Uw Sye Aa Ioic Blade tilt and up/down adjustment: hydraulically controlled Motor: approximately 7.5 kW Maximum blade diameter: 450 mm Overall machine width when in operation: 380 cm Condition: good, the motor fan guard is missing, but the machine still functions properly.

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 425.10.047.22, functionality: fully functional, We offer this Felder K700 panel saw in like-new condition, year of manufacture 2022. Iisdsyzfglopfx Aa Ijc Manufacturer: Felder Model: K700 Year of manufacture: 2022 Condition: like new X-Roll sliding table Scoring unit If you have any questions or require additional information, please contact us by message or phone.

Condition: like new (used), Year of construction: 2025, For sale is a used JET panel saw JTS-600XL with a maximum cutting length of 1600 mm. The machine was only briefly used for demonstration purposes in our showroom and is therefore in as-new condition. Technical data: - Motor: 230 V / 1.5 kW / 2 HP - Saw blade speed: 4000 rpm - Saw blade diameter / bore: 250 / 30 mm - Saw blade tilt: 0° – 45° - Max. cutting depth at 0°: 80 mm - Max. cutting depth at 45°: 54 mm - Max. cutting width at rip fence: 610 mm Iodjy Nm H Aspfx Aa Ieic - Table dimensions: 800 x 350 mm - Table extension: 415 x 350 mm - Table widening (right): 800 x 270 mm - Precision sliding table: 1600 x 255 mm - Max. cutting length: 1600 mm - Machine dimensions: 1650 x 2200 x 1100 mm - Weight: 157 kg Scope of delivery: - Sliding table 1600 x 255 mm - Circular saw blade Ø 254 x 30 x 3 mm - 36 TCT teeth - Parallel fence - Support table 460 x 600 mm with extendable crosscut fence 2200 mm - Extraction port Ø 100 mm The machine is located in A-8561 Söding and can be inspected during our business hours at any time. Subject to prior sale! Related terms: saw, circular saw, panel saw, format Reference: R-D1618

Condition: excellent (used), 4 kW engine. Trimmer attachment. Cutting height: 9 cm. Ground clearance: 125 cm. Table length: 157 cm. Isdpfx Aoy S U D Uja Ieic

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 3.6 kW (4.89 HP), Sanding belt width 150 mm, sanding belt length 2000 mm, table manually tiltable Iisdpey D Du Hefx Aa Isc

Condition: new, Year of construction: 2021, functionality: fully functional, Feed rate: 10 m/min – 10 + 18 m/min; Drive motor: 0.75 kW (S6) – 1.1 kW (S6); Precision running and guiding surfaces; Min. workpiece length: 140 mm; Min. Workpiece width: 70 mm. Segmented, rubberized chain plates with quick-change system. The minimum workpiece width varies depending on the workpiece length, height, and surface finish. Swiveling 15" smartouch control panel. Iedpfx Aajy Ndhdo Ieic Unlimited memory for user-defined edge programs. Fine adjustment of path parameters. Simple, clear, and intuitive display of units and functions. Unit selection and precise fine adjustment of the motor-positioned units (adjustment accuracy 1/100 mm) directly via the control panel. Adhesive temperature setting with automatic temperature reduction in standby mode. Pressure setting in the pressure zone. Optimization of the edge overhang during trimming (front and back). Plain text error messages. Maintenance schedule and linear meter counter.

Condition: new, CATALOGUE NUMBER RE060 - New machine TECHNICAL SPECIFICATIONS - Saw blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (works only with blades ⌀300, 350 mm) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Spindle speed 4000 rpm - Scoring spindle speed 8800 rpm - Blade tilting 0 – 45° - Max. cutting length 1600 mm Iiodoyvivmspfx Aa Isc - Rip fence cutting width 1250 mm - Riving knife ⌀350 mm - Spindle flange diameter 87.5 mm - Table fence set at 90° – 45° angle, accuracy ±1° - Max. cutting height with blade ⌀300 mm: 95 mm - Max. cutting height with blade ⌀350 mm: 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 480 kg - Machine dimensions (folded) 2020x3380x1200mm Net price: 16000 PLN Net price: 3800 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (Price may change with larger exchange rate fluctuations)

Condition: good (used), Year of construction: 1996, functionality: fully functional, Circular saw SICAR EXPRESS 32 year of construction 1996 S/N 800066 Manufacturer SICAR Italy Aluminum sliding carriage 1600mm main saw motor 5,5hp ( 4,0kW ) motor independent scoring motor 0,55kW Blades with 300/350/400 mm Cutting height of 110 mm at 90° and 80 mm at 45°. Iiedpfotw D Tbjx Aa Ijc Manual tilt and height adjustment Inclination of main saw blade and scoring blade reaches 45° Extra ruler for angular cuts Workpiece hold-down device Top extraction also for 45° cuts Voltage 380 V, 50 Hz. CE marked 720 kg Technical data subject to change

Condition: good (used), Year of construction: 2009, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 21 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 202 mm, cutting width (max.): 1,250 mm, saw blade diameter: 550 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 2,800 rpm, total length: 3,200 mm, Equipment: CE marking, saw blade guard, Format 4 Panel Saw Kappa 550 Power Drive - 11 kW, speeds 2800-4000 rpm - Year of manufacture: 2009 - Power Drive control system - Positioning control for height adjustment: 202 mm - Positioning control for tilt adjustment: 90°–45° - Crosscut fence 3200 mm, 2 fence stops - Outrigger table 1250 x 650 mm - "X-Roll" sliding table, cutting length 3200 mm, edging shoe - Cutting width 1250 mm - Overhead guard, extractable and height adjustable, can be swung out of the working area (not shown in the pictures but available) Isdpsy Hk Swefx Aa Ioic - Saw blade diameter 250–550 mm, max. cutting height 202 mm - Position-controlled height and angle adjustment 0°–46° - Table saw with table extension up to 1200 mm behind the saw axis, powder-coated steel - Weight: 1300 kg Price ex location Transport available at extra charge!

Condition: like new (used), Year of construction: 2020, For sale is a demonstration machine: Hammer K3Winner Comfort panel saw with a cutting width of 300 mm. The machine was only briefly used for demonstration purposes in-house and can thus be considered as new, with full warranty/guarantee. Technical specifications: - Sliding table 2000 mm - Extension table 1100 mm - Mitre fence 1300 mm - Angle stop index Iisdpfjy Akdrjx Aa Ioc - Saw blade tiltable 90–45° - Max. cutting height 104 mm with 315 mm saw blade diameter - Cutting width 800 mm - 5.5 HP (4 kW) motor, 400 Volt - Year of manufacture: 2020 The panel saw is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, Hammer, panel saw, panel Reference: R-D1618-10

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Working range X: 3120 mm Working range Y: 2160 mm Working range Z: 105 mm 4-axis electro-spindle (360-degree rotation), 15kW power Enclosed cable management system for movement along the X and Y axes Vertical drilling bits: 12 Horizontal drilling bits: 4 Iedey Sz U Tspfx Aa Ijic 2 grooving blades: 1 in the X direction and 1 in the Y direction Tool magazine with 10 positions on the right rear side 8-position tool changer on the left side of the machine Three vacuum pumps, 3 x 250 m³/h Loading unit with lifting table on the machine inlet side Air conditioner for the electrical cabinet Centralized automatic lubrication system Photoelectric safety barrier Angular gearbox with 1 output and WELDON attachment for screwed circular blade, Dmax = 240 mm H06-H10 CNC starter tool kit Includes 1 blade and HSK collet assembly with tools/cutters.

Condition: new, Bernardo circular saw FKS 2000 Pro/ 400 V Technical specifications Table dimension 800 x 380 mm Format table 2000 x 270 mm Trimming length 2000 mm Max saw blade diameter 315 x 30 mm Max cutting height 90° / 45° 100 / 80 mm Cutting width at the parallel stop 1200 mm Table height 870 mm Table extension 500 x 310 mm Table widening 800 x 880 mm Boom table with roll 700 x 580 mm Speed Main saw blade 4000 rpm Speed scoring saw blade 5800 rpm Scribble saw blade 90 x 20 mm Suction connection of 100 mm Engine power S1 100% 3.8 kW (5.1 hp) Motor recording power S6 40% 5.3 kW (7.2 hp) Voltage 400 V Machine dimensions (W x D x H) 2000 x 2900 x 1180 mm Weight approx. 280 kg Delivery • HM saw blade 315 x 3.0 x 30 mm / Z 40 Isdpfx Ajd N Tagsa Ijic • Pre-cut saw blade 90 x 3.0 x 20 mm / Z 12 • Saw blade protection hood with suction connection • Connection hose with Y-piece • Miter stop with eccentric tensioner • Miter stop • Trimming shoe • Table extension • Table widening • Parallel stop • Extendable telescopic stop • Stop flap with fine adjustment • Boom table • Sliding stick • Sliding handle • Operating tool Properties • Extendable telescopic stop (up to 2260 mm) mountable at the front and rear boom table, infinitely pivotable from 90° to 45° • Important performance feature: saw blade diameter 315 mm can also be used when the scoring unit is mounted • Large-sized work table and standard table widening for cutting

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 85 mm, cutting width (max.): 1,200 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, actuation type: electric, rotational speed (max.): 6,000 rpm, overall weight: 600 kg, Equipment: CE marking, documentation/manual, saw blade guard, Model: MJ45Y 2000 Brand: PERFECT, POLAND – CE certificate – Operating manual in Polish – Spare parts available now and in the future TECHNICAL SPECIFICATIONS: – Cutting length: 2000 mm – Cutting width: 1200 mm – Cutting height at 90°: 85 mm – Tilting saw blade: 0° - 45° – Max. main saw blade diameter: 315 mm – Max. scoring blade diameter: 125 mm – Main motor power: 4 kW – Scoring motor power: 0.75 kW – Main saw rotational speed: 4000 / 6000 rpm – Scoring saw rotational speed: 8000 rpm – Carriage guided on steel rods – Two separate motors – S1 motor – suitable for continuous operation – Outrigger-mounted guard – required by H&S regulations – Centralized lubrication – Parallel fence with fine adjustment – Extendable fence up to 2300 mm – Two hinge stops / catches – Aluminum sliding table, width: 370 mm – Sliding table with stepless locking – Electronic saw angle indicator Iiedpoyuf Eysfx Aa Isc – Tiltable upper extraction hood – Fence / protractor for angled cuts – Extraction ports: Ø 100 mm, Ø 80 mm – Table dimensions: 1850 x 1700 mm – Table height: 880 mm – Table extension: 660 x 765 mm DIMENSIONS WHEN ASSEMBLED: – Length: 2800 mm – Width: 2000 mm – Height: 1340 mm – Weight: 620 kg PACKAGING DIMENSIONS: – Length: 2070 mm – Width: 1100 mm – Height: 1250 mm – Weight: 620 kg

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 54720907, functionality: fully functional, Connected load 380V 6,1A 3,8kW saw blade diameter max. 315 mm weight approx. 330 kg length of trimming carriage 2150 mm speed 4000 rpm suction nozzle 100 mm cutting width 1100 mm Angle fence Rip fence Iijdpfsh U A S Ujx Aa Isc

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 104 mm, cutting width (max.): 1,250 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, – Austrian production – X-Roll sliding carriage guide system – DTR and CE user manuals TECHNICAL SPECIFICATIONS: – Carriage length: 2050 mm Iiodpfx Ajym Amlea Ijc – Cutting width (right): 1250 mm – Max. blade diameter: 315 mm – Scoring unit diameter: 100 mm – Main motor: 5.5 kW – Scoring unit motor: 0.75 kW – Brake – X-Roll guide system – Cutting height adjustment – Manual angle adjustment: 0° - 45° – Max. cutting height: 104 mm – Possibility to install cutter: thickness: 6 - 20 mm – Max. diameter: 228 mm – Pawl – Blade guard – Extraction port diameter: 50 and 120 mm – Dimensions (L/W/H): 220 / 200 / 130 cm – Weight: ~ 550 kg

Condition: new, Year of construction: 2026, The CORMAK MJ45-KB4 sliding table saw is an industrial panel saw with a scoring unit, designed for precise cutting of furniture boards, plywood, and other wood-based materials. The 2600 mm sliding table and robust construction ensure repeatability and high cutting quality. Key advantages of the machine Scoring unit with a separate motor – eliminates chipping on laminates and veneers. Aluminum sliding carriage running on hardened steel guide bars – ensures rigidity and smooth feed. 2600 mm sliding table – reliable handling of large and heavy panels. Main motor 5.5 kW – consistent cutting quality in continuous operation. Tilt range 0–45° – flexibility when cutting angled components. Extendable telescopic fence up to 3100 mm – fast and repeatable settings. Rotational speeds 4000/6000 rpm (main blade) and 8000 rpm (scoring blade) – optimal adjustment to material type. Cast iron body – vibration damping and cutting system stability. Construction and technology The design is based on a torsion-resistant cast iron body, which stabilizes the saw unit and minimizes vibrations. The aluminum carriage moves on hardened rods, ensuring long-term precision. The outrigger table facilitates handling large panels without additional support. Adjustment mechanisms with clear readouts (including angle indication on the handwheel) allow for quick and precise setup. Precision and performance The MJ45-KB4 sliding table saw ensures clean edges thanks to the 125 × 20 mm scoring blade and stable guide geometry. The cutting height range up to 90 mm at 90° and 56 mm at 45° allows processing of a wide range of formats and thicknesses. Two main blade speeds enable parameter adjustment to the material type, maintaining dimensional repeatability and reducing the need for rework. Applications The machine is dedicated to workshops and production facilities seeking a stable panel saw with a scoring unit for serial cutting of furniture and structural elements. It meets the requirements of plants where quality, dimensional accuracy, and reliability in multi-shift operation are essential. Standard equipment Scoring unit with separate drive 2600 mm sliding table on guide bars Dial indicator for blade tilt Telescopic fence up to 3100 mm (front/rear mounting on support table) User manual in Polish CE declaration of conformity Optional equipment Set of saw blades for wood and laminate Dust extraction systems Panel transport trolley Technical specifications Sliding table length: 2600 mm Iisdsywkc Dspfx Aa Isc Cutting width: 1250 mm Saw tilt: 0–45° Cutting height at 90°: 90 mm Cutting height at 45°: 56 mm Max main blade diameter: 315 mm Max scoring blade diameter: 125 mm Main blade speed: 4000 / 6000 rpm Scoring blade speed: 8000 rpm Main motor power (continuous S1/S6): 5.5 kW Scoring motor power (continuous S1/S6): 0.75 kW Weight: 650 kg

Condition: new, Year of construction: 2026, The PS12E-3000 format saw is a professional carpentry tool that stands out for its powerful specification and its ability to perform large-scale precision cuts. This advanced circular saw has been developed for a variety of woodworking tasks and is the ideal tool for demanding users. The main features of the saw, the PS12E-3000 wood panel saw: Two cutting discs: The saw is equipped with two cutting discs - a main disc and an undercutting disc - which provides ample cutting capacity for different types of wood materials. Large format table: One of the main advantages of this model is the extra-wide, bearing-mounted format table with support, which allows precise processing of large-format chipboard up to almost 3,000mm long and other large-sized wood materials. Additional undercutter: The additional undercutting blade makes the saw ideal for cutting furniture board and particleboard, eliminating the risk of splintering and ensuring an even cut. Disc inclination: The cutting disc can be tilted from 90° to 45° Maximum bar length: This saw is fitted with a bar of an impressive length of 2,300 mm Disc replacement: The replacement process is quick and efficient, thanks to the ability to remove the metal top and unscrew the blade. Saw blade guard: The saw has an effective saw blade guard, which can also be connected to the extraction system to help keep the work area clean. Powerful motor: The saw blades are driven by a powerful 3.8 kW, 400V motor, which guarantees smooth operation and efficient cuts. Control panel: The machine's control panel is located on the underside of the saw and includes an emergency stop, a knob for angle cuts (45°) and a knob for blade height adjustment with a locking mechanism. Additional measuring instruments: All guides are equipped with length and cutting angle scales, allowing the required angle and length to be quickly set without the need for additional measurements. Extraction compatibility: The saw is suitable for connection to a sawdust and chip extraction system with a suction nozzle diameter of 100 mm, which contributes to keeping the workplace clean. Application of the saw, format saw for wood: The PS12E-3000 format saw is an advanced tool that combines durability, precision and performance, making it the ideal choice for professional woodworkers and everyday woodworkers. Its versatile capabilities and advanced features allow it to handle a wide variety of woodworking projects and tasks in both industrial and craft settings. DIMENSIONS OF THE MOVING TABLE 3000 x 270 mm MAIN TABLE DIMENSIONS 800 x 385 mm Isdpfx Aajvugc Aj Ieic SIDE AUXILIARY TABLE DIMENSIONS 880 x 800 mm BAND WIDTH 1220 mm SAW TILT 0-45° CUTTING HEIGHT AT 90° 100 mm CUTTING HEIGHT AT 45° 80 mm MAXIMUM SAW SIZE 315 mm MAXIMUM Blade size 100 mm MAIN SAW RPM 4000 rpm CUTTING SAW RPM 5800 rpm POWER OF ENGINE S6 5,3 kW / 7,1 hp POWER OF ENGINE S1 3,8 kW / 5,1 hp 400 V POWER SUPPLY WEIGHT 309 kg