Used circular table saws for sale (35)

Condition: new, Year of construction: 2025, cutting width (max.): 280 mm, cutting height (max.): 48 mm, saw blade diameter: 168 mm, cutting width at rip fence: 280 mm, Festool Cordless Table Saw CSC SYS 50 EBI-Set Pedpfxsxzudqj Ag Dsrd 36 Volt battery voltage, No-load speed 4,500 - 6,800 rpm, tiltable from -10° to +47°, cutting height 0 - 48 mm (at 45° = 34 mm), electric height and tilting adjustment with digital display maximum rip capacity 280 mm, sliding table with cross-cutting width up to 450 mm, miter angle stop 0 - 70°, complete with: saw blade 168 x 1.8 x 20 mm, Z = 42 tooth WD, parallel guide, push stick, angle stop, dust collection bag, riving knife for concealed cuts, riving knife with blade guard, 6 mm hex key, energy set SYS 18 V 2 x 5.5/TCL 6 DUO, stand UG-CSC-SYS Order No.: 577379 available ex stock Seevetal, promotion valid until the end of 2025, while stocks last, without shipping and packaging

Condition: excellent (used), Catalogue number: 7754 TECHNICAL DATA min. length of cut element: 340mm/420mm max. length of cut element: 4380mm max. cutting height: 80mm installed blade diameter: 350mm blade guard (also serves as a hold-down) spindle diameter: 30mm main motor power: 3×2.2kW feed motor power: 0.75kW stepless feed speed adjustment manual adjustment of left/right unit fixed central cutting unit dust extraction port diameter: 3x100mm overall dimensions (L/W/H): 5400x1750x1450mm weight approx.: 1500kg Prodpfxjxfkn Te Ag Dsd – Polish manufacture – For processing pallet boards – Used saw, very good condition Net price: 28,900 PLN Net price: 6,880 EUR (depending on the 4.2 EUR rate) (Prices may vary with significant fluctuations)

Condition: used, GRAULE AGT pull and table circular saw Prodpfsxf Tr Ujx Ag Djd

Condition: excellent (used), Year of construction: 2010, Storti TGS 78, year of manufacture 2010 Pedpfxjxx N Edo Ag Dsrd

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, cutting width (max.): 1,200 mm, cutting height (max.): 130 mm, saw blade diameter: 400 mm, cutting width at rip fence: 1,200 mm, type of input current: three-phase, input voltage: 400 V, main saw diameter: 400 mm, rotational speed (min.): 3,500 rpm, rotational speed (max.): 4,500 rpm, cutting length (max.): 1,250 mm, With a pivoting 400 mm saw blade With manual height and angle adjustment 130 mm cutting height Psdpfx Ajwa A E Aeg Djrd Sample machine built in 2022

Condition: new, Year of construction: 2023, functionality: fully functional, cutting height (max.): 79 mm, saw blade diameter: 250 mm, cutting width at rip fence: 769 mm, total height: 7,900 mm, total length: 14,050 mm, total width: 15,500 mm, table width: 792 mm, table length: 508 mm, input voltage: 230 V, extraction connection diameter: 100 mm, overall weight: 120 kg, rotational speed (max.): 3,800 rpm, hole diameter of the disc: 30 mm, power: 1.45 kW (1.97 HP), The Fusion 1 model is an excellent solution for anyone looking for a compact but very accurate and high-quality saw to start with - Polished cast iron table. - Robust cast iron motor suspension. - Can be used with DADO circular saw blade set. - Two T-slot rails on both sides of the circular saw blade. - Quick and easy control and tilting of the cutting height. - Lever for quick exchange of circular blade. - Positionable main switch. - Quick attachment of the riving knife. - Additional rear table included in the price. - Sufficient power for longitudinal and cross cuts up to 79 mm in height. - Storage space for tools and rulers that are always to hand. - Type: Fusion 1 - Recommended area of application: Craftsman - Power (230 V): 1450 W - Recommended fuse switch: 13 A - Disc x clamping: 250 × 30 mm - Rotations: 3800 rotations/min. - Tilting of the disk: 0-45° - Max. Max. cutting height at 45°: 50 mm - Max. Cutting height at 90°: 79 mm - Max. Cutting width: 769 mm - Extraction: 100 mm - Cast iron table size: 508 mm × 792 mm - Overall table size: 1118 mm × 792 mm - T-slot rail dimensions: W × H 24.3 mm (19 mm), × 4.2 (10.7) - Dimensions: 1550 mm × 1405 mm × 1100 mm - Weight: 110 kg - Packaging size: - Cardboard box on its own pallet 1330 mm × 700 mm × 790 mm - Weight incl. packaging: 120 kg Scope of delivery Predpstuurtofx Ag Djd - elongated ruler - Angled ruler - Gripper for small parts - Upper suction hood - Rear table extension - Carbide circular saw blade for universal use (diameter 250/30 mm, Z40 - Hose for suction The machine is delivered partially disassembled in a transport box. The set-up time is estimated at approx. 1 hour.

Condition: good (used), functionality: fully functional, cutting width (max.): 1,200 mm, cutting height (max.): 70 mm, saw blade diameter: 125 mm, total height: 1,300 mm, total length: 6,000 mm, cutting height with scoring (max.): 2 mm, extraction nozzle diameter: 250 mm, type of input current: three-phase, input voltage: 400 V, space requirement width: 3,000 mm, space requirement length: 6,500 mm, input frequency: 50 Hz, main saw diameter: 350 mm, overall weight: 3,500 kg, rotational speed (max.): 3,800 rpm, cutting length (max.): 4,200 mm, feed length X-axis: 4,500 mm, feed rate X-axis: 7 m/min, collet bore: 75 mm, saw blade speed: 3,800 rpm, saw drive: 7,500 W, year of last overhaul: 2024, Saw for rip cutting but also for sawing. It is very well suited for longitudinal edging of lumber flanks and then cutting to width before planing. With this machine, sawing lumber is incomparably lighter than on classic saws even with a carriage. It can work in automatic and semi-automatic cycle . It has 4 ranges of aggregate position as far as the length of the element is concerned, which means that the aggregate does not have to return all the way to the end of the machine, which shortens the time of cutting the raw material. It significantly facilitates and accelerates the manipulation of Prsdjuyvniepfx Ag Ded with the preparation of lumber for planing, and the even cut makes the alignment saves time on planing the element. Working on it is relatively safe because during the cutting itself, the operator does not have direct contact with the material being cut, and the workpiece is pressed from above with a pressure beam using compressed air. Activation of the pressure beam and the feed of the cutting unit, is carried out using a foot pedal .It is also suitable for cutting boards with a jigsaw .Also equipped with components for various applications. It is ideal for small and medium-sized carpentry shops that process thick massive lumber. The machine is massive and durable.

Condition: used, SECOND-HAND RADIAL ARM SAW STROMAB Prsdpfjwr T Hbsx Ag Djd

Condition: used, Graule AGT combined sliding table saw. The sliding table saw can be tilted and pivoted. The machine can also be used as a sliding table saw only by removing the table. cutting height: 85/40 mm cutting length: 380mm Pedpjwqphlefx Ag Dsrd

Condition: used, Year of construction: 1981, functionality: fully functional, Connected load 380V 3.0kW 6.7A Weight approx. 300 kg Cutting width 900 mm Table extension own construction Sliding table Prsdpfeq Au N Eox Ag Dsd Fixed 90° angle fence Saw blade guard PSV own construction Unit swivels to 45° manually Manual height adjustment Extraction socket 100 mm Rip fence missing Stop for ruler missing

Condition: used, Year of construction: 1998, with parallelogram cross tableDigitalused, good conditionMake KoelleType KS 340Year of construction 1998CE type testedTrolley length approx. 3115 mmCutting width approx. 1000 mmswiveling up to 45°scoring unitDigital display:- Rip fence- angle stop- Parallelogram tableExtraction connection D 120/80 mmRequired space approx. 3300 mm x 1900 mm x 1600 mmStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Pedpfxsvxr Tbs Ag Derd

Condition: new, Year of construction: 2025, This machine is a powerful, precise and universal device in a compact body, created for all workshops, furniture manufacturers and carpenters looking for a powerful machine. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Precise saw cutting and height adjustment through a knob Parallel guide with microadjustment Table ground, made of cast iron with expansion capability Stable, uniform table saw design, intended for any carpentry work Integrated side table provides great cutting capabilities Technical data Maximum saw diameter 254 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 50 mm 90º maximum cutting depth 80 mm Prsdpfxjvxhlgs Ag Ded Worktable dimensions 350×800 mm Movable table dimensions 240×1320 mm S1 continuous work motor power 2.2 kW Power supply 400V Weight 180 kg Dimensions 1550×1900×820 mm

Condition: used, OMGA T421 IDC000097 - saw blade diameter: 400 mm Psdpfx Agju Dhupj Derd - complete with saw dust filter

Condition: used, SECOND-HAND RADIAL ARM SAW LYONFLEX Pedpemzbmiefx Ag Dord - Volt. 380/50

Condition: used, Swiveling table saw Rapid type PK 100 for sawing wood and other materials with width stop. cutting width: 300 mm Prodev T Txzepfx Ag Dod

Condition: reconditioned (used), Year of construction: 1979, saw blade height Raimann 90 mm chain width 250 mm after regeneration machine completely renovated engine 22 kW cutting width 250 mm shaft diameter 80 mm drive from the main engine to the shaft using a flat belt Psdpfxoh Rv Eys Ag Dsrd

Condition: new, The work table made of heavily ribbed gray cast iron andguarantee the base made of welded steelTorsion resistance and vibration-free workingHigh quality machine at a real entry-level priceUnique in this performance class:- Format sliding carriage made of anodized aluminum for the highestcutting precision- Cutting plane directly on the saw blade- Swiveling saw blade unit from 90 - 45 °- Table bracket with aluminum crosscut fence and adjustableStop flap for plates and large workpieces- Rip fence with round bar guide and fine adjustment- Powerful engine- Made in EuropeDimensions and weightsWeight (net) approx. 170kgDust extraction connectionExtraction nozzle diameter 120mmExhaust nozzle diameter saw blade protection 60mmTransport width 680 mmWorking area 1600 mm x 2300 mmSpace requirement 2613.5 mm x 2134 mmPlease add the specified dimensions with the space required to obtain the recommended free space for the dimensions take into account maximum travels or usable lengthsElectrical data400 V supply voltageDrive motor 1.8 kWPhase (s) 3 PhNominal operating mode drive motor S6Current type ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat sliding table 1140 mm x 200 mm x 70 mmTable 1024 mm x 224 mm x 900 mmsaw unitCutting width with rip fence 700 mmMax. Cutting height 90 ° 67mmMax. Cutting width to the left of the saw blade 1200 mmMax. Cutting height 45 ° 40mmEdging length 1200 mmSaw blade diameter 250mmSaw blade inclination 90 - 45 °Saw blade speed 3900min¯¹scope of deliverytable extensionAnodized aluminum sliding tableRip fence with round bar guide and fine adjustmentAluminum folding stopEccentricItem No. 5504113 Prjdpsvxr S Rjfx Ag Dod

Condition: new, Year of construction: 2025, The innovative circular saw is a combination of a powerful, precise, universal and compact device. It was created for small carpentry workshops, furniture manufacturers and craftsmen. This machine uses many solutions usually used in more expensive devices of this type. The excellent price-performance ratio has been achieved without compromising on quality or versatility. Machine description Prjdpevxhm Djfx Ag Dod The TS 315 industrial circular saw for solid wood is an innovative combination of a powerful, precise, universal and compact machine! It was created for carpentry workshops, hobbyists, furniture manufacturers and craftsmen This machine uses many solutions used in much more expensive machines of this type! Excellent price-performance ratio has been achieved without compromising on quality or versatility! The machine is also used to process high-density boards, MDF boards, ABS panels, PVC, solid wood and other materials based on wood or with a similar structure and hardness. Smooth and precise adjustment of height and angle using a knob Stable, heavy, high-quality machine body. Broadening and extending the table allows for comfortable work. Smooth aluminum reinforced sliding table. Precision parallel stop with fine adjustment. Sturdy telescopic arm and extendable extension table Large drive motor guarantees consistent cutting speed, even at a cutting height of 100 mm Technical parameters Shield dimensions 315x30x3.2mm Dial rotation 4250rpm Max. cutting height 90/45 degrees 100/75mm Max. cutting width on the guide 940mm Workbench dimensions 800 x 365mm Table extension 760 x 600mm Expanding the table 500 x 350mm Sliding table 1600 x 238mm Suction port diameter 100mm Motor power 2.8kW Supply voltage 400V Weight 245 kg Machine dimensions 1540 x 2400 x 1300mm

Condition: used, Rip saw - Saw for lengthening boards. Prsdpfxstq Eble Ag Ded - Manufacturer: omega T55 300 - Year: 1996 - Electric motor - Frequency counter

Condition: good (used), cutting height 120 mm Predpfx Agjwm Swno Dsd main engine 11 kW smooth feed speed regulation two-disc

Condition: used, Circular saw is in working condition, top frame is moving. Can saw in angle. Prsdpfegrkb Dsx Ag Ded

Condition: reconditioned (used), Year of construction: 1993, multi-saw with moving saw linck masker Prsdpfolwp Diex Ag Djd saw with a movable saw floating on hydraulics

Condition: new, Basic equipment and accessories10-year guarantee on the guide system of the saw carriage- Saw carriage with anodized aluminum profile guide made of hardened,ground and flanged steel guides- Saw carriage length 3200mm- "READY" electronic control, 2-axis control (3rd axis onrequest) with:- Height adjustment and inclination of the saw unit (control of therip fence on request)- Management of the tool data with automatic correction of theCutting height in relation to the angle of inclination of the saw blade- Manual, semi-automatic and automatic mode with 99storable work programs- Additional functions: calculator and hour meter- Trimming frame for quick positioning of the stopmiter cuts- Table extensions in the outlet- Cutting length at the rip fence 1270 mm- 2-axis control with 99 programsMotor 7kW 50Hz (8kW 60Hz)- Motor with direct connection with push buttons- Three main saw blade speeds- Scoring unit with independent motorization, externally adjustable andStops for easy saw blade positioningSecurity/Protection- Emergency stop button on the front- Emergency stop button on the side near the rip fence (Version CE)- Thermal protection switch- Saw blade swing protection (version CE) integrated suction, suction nozzlewith a diameter of 80 mm- Saw blade swing protection with integrated suction, suction nozzle with 80 mmdiameter- Automatic motor brake on the main saw blade (CE version)- Lockable main switch- 110 V auxiliary circuit- CE Declaration of Conformity (CE version)Technical specificationsMax cutting height at 90° (mm) 140 with blade 400Max cutting height at 45° (mm) 97 with blade 400Saw blade tilt (degrees) 45Programmed lifting and swiveling of the saw blade unitSaw blade speed (rpm) 3000- 4000- 5000Scorer speed (rpm) 8500Main engine power (S6 -40%) kW (hp) 50 Hz 7 (9.5)Scoring unit power (S6 -40%) kW (HP) 50 Hz 1.3 (1.7)Format cuts:- with trolley 1600 (mm) n.a.- with trolley 3200 (mm) 3200x3200Cutting width for parallel cuts (mm) 1270Suction nozzle diameter:- on frame (mm) 120- on the saw blade guard (mm) 80- on the riving knife (mm) n.a.Net weight base machine (kg) 1050109999 Execution according to safety regulationsR10078 nova si 400ep CE version930731 volts 400 EU931201 Frequency 50 Hz570343 Digital readout for rip fenceComplete with:- Digital display and magnetic tape570133 Motor 9kW 50Hz (11kW 60Hz) with automatic star/delta switch kW9 HP12 Hz50 (kW11 HP15 Hz60)083202 base109993 MACHINE LANGUAGE: German Prodovxr Skepfx Ag Djd

Condition: used, Saw is in working condition. Pedpjgrkb Sjfx Ag Dsrd

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder double saw blade cutting height 200 mm, engine power 40 kW, chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material. Prjdpfxjh R Tvtj Ag Dsd