Condition: used, Saw unit including cable and switch. engine: 0,24 kW number of revolutions: 2,700 rpm Gsdpfx Aajw Uz Rrjysuk

Condition: used, Year of construction: 1980, 400 mm weight 1,3 t miter ja Godpfxoxzu Dwe Aayeuk

Condition: used, Year of construction: 2004, 2 blades Automatic ascent Pneumatic pressers Guodpexzpwlofx Aayek Adjustment stops 380V

Condition: new, Year of construction: 2026, functionality: fully functional, Cutting fixed lengths according to cut lists and cutting out defective sections Cutting cycle: Defect trimming via chalk marking Cutting to fixed lengths, standard and sequential cutting, sequential cutting in marking mode. Infeed material: variable lengths with single piece loading WS.1 Through-feed crosscut saw 4 pcs. lower feed rollers 1 pc. loading table, 2 meters, right side, with dual marking table 1 pc. outfeed table, 1 meter, with rear stop Gjdpfx Aasx Da Tveysuk Roller height adjustable manually 12 pcs. luminescent chalk sticks Cutting capacity: Position A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Position B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control system with: 7" color touchscreen Editing of cutting cycles directly on the machine Programming options: - Defect trimming via marking - Operation with cut list consisting of 10 dimensions; repeat option for each dimension; total number of pieces for each dimension 100 storage slots for cut lists Detection system for the last two pieces to be cut and the following piece Electronic control of sorting unit with No.1 ejection kicker (ejection kicker optional) Technical specifications: Feed system adjustable by motor, brushless and with toothed belt Feed speed 100 m/min Cutting accuracy +/- 0.8 mm TCT blade diameter 500 mm Motor power 7.5 kW Cutting cycles per minute up to No. 100 Minimum workpiece length 550 mm Minimum workpiece width 40 mm Minimum workpiece thickness 15 mm On request: ZA295 Additional loading table with dual marking table ZA110 Outfeed table ZA058 TCT saw blade Ø 500 mm ZA296 Motorized adjustment of roller height

Condition: good (used), Year of construction: 2011, Panel saw HOLZ-HER Model: 1255 Guedpox Hyr Hsfx Aayjk Condition: used Year of manufacture: 2011 Cutting length: 6300 mm (max) Vertical cutting height: 2200 mm (max) Horizontal trimming height: 2200 mm (max) Workpiece thickness: 60 mm (max) Scoring height horizontal: trimming height Scoring height horizontal: 2040 mm (max) Voltage: 400V 50 Hz Weight: 920 kg Equipment: - Operating manual - Next UVV safety inspection: 05/2026

Condition: good (used), Year of construction: 1993, Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg Guodpfx Aetxkprsayjk

Condition: used, Pfeiffer Piccolo pendulum saw with a stable roller conveyor for cutting boards and beams. The machine features a pneumatic saw feed with safe two-hand operation. Video available upon request. Cutting height: max. approx. 120 mm Cutting width: max. approx. 600 mm Feed: Pneumatic cutting height: max. approx. 120 mm cutting width: max. approx. 600 mm feed: Pneumatic roller conveyor: 250+360 cm Gusdpfx Aaexrtzpoyok

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Condition: Guides slightly worn, only suitable for rough cutting Equipment and technical data: - Cutting length: 4300 mm - Max. passage height: 2200 mm - Max. trimming height: 2100 mm - Max. scoring height vertical: 2100 mm - Cutting depth: 80 mm - Motor: 5.5 kW - Saw blade speed: 4500 rpm Godpfjwqifkjx Aayouk - Saw blade diameter: 300 mm - Extraction: 2 x 100 mm - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 mm Availability: short-term Storage location: Flörsheim

Condition: ready for operation (used), Year of construction: 2020, General Data Machine weight 1950 kg Measurements height 1700 mm Gsdpfx Aaex D Iproyeuk Dimensions Machine Length 1700 mm This Wood Band Saw was manufactured in 2020. It features a maximum log diameter of 1100 mm and a cutting length up to 10 meters. The main drive is robust at 15 kW, ensuring efficient operation. It includes a double edger, wood excavator, and various operational enhancements such as an electrically adjustable saw head and multiple feed speeds. Ideal for comprehensive woodworking tasks. Contact us for more information about this machine. Application Types Sawing (Wood)

Condition: good (used), Year of construction: 2003, functionality: fully functional, Length of sliding table: 3,000 mm Cutting width at rip fence: 1,000 mm Cutting height with blade diameter 450 mm: 75 - 150 mm Cutting height with blade diameter 350 mm: max. 100 mm (each at 90-degree blade position) Double carriage on steel round guides, no Pertinax Reinforced main saw motor: 7.5 kW Maximum saw blade diameter: 450 mm Height adjustment of the saw unit via dimension input on the control panel Motorized tilt adjustment of the saw unit via dimension input on the control panel Supplied with newly installed 350 mm saw blade 2-axis scoring saw unit, can be set in the control system to desired height and alignment relative to the main saw blade Scoring unit automatically lowers below table level when not in use Adjustment of the scorer can be done while the machine is running RAPIDO scoring saw blade – simplifies scoring width adjustment, set up in max. 3 minutes Adjustment range: 2.8 – 3.8 mm Gedpfxex Dax Ej Aayjuk Additional accessories: - Mitre fence extendable to 3,200 mm, with 2 foldable stops - LASER cutting line indicator, e.g. for trimming cuts on solid wood planks

Condition: used, Outer diameter: 60 Godpfx Aexvchmjayouk drilling: 50 mm length: 100 mm material: steel number of revolutions: max. 9,000 rpm

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,500 kg, total height: 1,250 mm, working width: 930 mm, product length (max.): 2,200 mm, General Data Machine weight 1500 kg Measurements height 1250 mm Guedpfx Aaox D E T Ujysk Dimensions Machine Length 2200 mm Technical Specification Working Width 930 mm Feed Speed 12 m/min This WINTER MBS 930 was manufactured in 2019. It features a motor power of 22.0 KW and a spindle diameter of 74 mm. The saw blade diameter is 205 mm, and it operates at a speed of 2600 rpm. Feed speed ranges from 0 to 12 m/min. Ideal for precise wood cutting. Contact us for more information. Application Types Sawing (Wood)

Condition: used, length: 950 mm width: 600 mm Gedpfx Aotvb Hhoayeuk cutting height: about 60 mm engine: 2,2 kW connection: 16A / 400V Mobile firewood saw for chopping strips, branches and other waste wood.

Condition: ready for operation (used), Year of construction: 2022, This WoodVER UPK-1 was manufactured in 2022. It features a maximum log diameter of 1000 mm and lengths from 2.0 to 6.5 m. The saw has a 550 mm diameter and operates at speeds up to 3000 rpm, powered by dual 18.5 kW motors. It includes an automatic feed, CNC remote control, and hydraulic log handling, enhancing productivity and precision. Contact us for more information about this machine. Application Types Guodpox D I E Tofx Aaysk Sawing (Wood)

Condition: used, knife: HW WZ Z144 flight circle (ø): 500 mm drilling: 30 mm Gjdpfxjwcpnpo Aayjuk width: 3.5/4.8 mm material: steel

Condition: used, Striffler Type 2750-E double-cut miter saw for precise miter and cross-cut cuts in wood profiles, moldings, and frames. The machine is ideal for series production in window, door, and furniture construction thanks to two pneumatically pivoting saw units and electronic positioning. Gujdpsw D Dfxofx Aayok cutting length: about 2,200 mm miter angle: 45° – 90° workpiece: max. 50x70 mm Further data: See PDF

Condition: used, cutting length: max. 4.000 mm saw blade ø: 400mm (max. 450mm) Gsdpjp E I S Refx Aayeuk Length adjustment: Manually Angle adjustment: Manually Double-sided mitre saw Düspohl DGK 400 B for two-sided mitre cuts with saw unit from above and additional horizontal cutter (cornice function).

Condition: used, knife: HW-Z72 flight circle (ø): 500 mm drilling: 30 mm width: 3,8 mm Godpfxstddxve Aaysuk material: steel

Condition: used, Length: 950 mm Width: 600 mm Cutting height: approx. 60 mm Gusdpfx Aajtvb Hdeyjk Motor: 1.5 kW Connection: 220 V Mobile firewood saw for shredding battens, branches and other waste wood.

Condition: used, Schleicher Type F7 miter punch for precise miter cutting in wood, plastic, or aluminum moldings. This machine is ideal for frame construction, especially for windows, doors, and picture frames, thanks to its precise cutting guidance and robust construction. Punching angle: 45 to 90° Max. Workpiece height: approx. 65 -160 mm Max. workpiece width: about 100 mm drive: Manually Guedpownmv Iofx Aayek

Condition: used, Circular saw blade or grooving saw in very good used or like new condition. D: 250 mm keyway: 20 mm diameter: 250 mm drilling: 70 mm width: 6,0 mm knife: 20 + 2 Gsdpfxswrrdre Aayjuk d: 70 mm B: 6,0 mm Z: 20+2

Condition: used, Double cross-cut saw / format saw Rüco 21 for cutting, trimming and shortening wood or panels. saw: 3 cutting width: max. approx.: 2,050 mm Depth of cut: max. approx.: 2,200 mm Cutting depth: max. approx.: 2,200 mm cutting height: max. approx. 100 mm More technical data: see PDF Gujdpfslfdx Uox Aayjk Further technical data: see PDF

Condition: used, Multi-blade circular saw Waco Lamell 90 for sawing, trimming, ripping or grooving boards with new feed chain. Cutting height max. approx.: 100 mm chain width: 300 mm Clamping length approx.: 300 mm clamping length approx.: 300 mm Chain: New Gujdpfxow Ng T Us Aaysk Function: Lowered chain in the cutting area function: Lowered chain in the cutting area engine: 45 kW

Condition: used, State: Functioning hard disk: Empty Guodpfxst N Ag Nj Aayok Technical specifications: on demand

Condition: used, Graule AGT combined sliding table saw. The sliding table saw can be tilted and pivoted. The machine can also be used as a sliding table saw only by removing the table. cutting height: 85/40 mm cutting length: 380mm Guodpfewqphlex Aayek