TWIN resaw very nice construction. Real solid and hydraulic controls.
Wheel diameter 1.100 x width 120 mm for saws up to 135 mm max width off sawblade.
2 head rigs are mobile and sliding on steel support with hydraulic powering.
MUDATA setworks.
Machine equipped with feeding rolls on top off the lumber. This can work as return of the board for next cut.
With 1 x straight face at right, the machine can use its drive wheel on left to make next cut pushing the board to the movable guide at rig...
Paul multi blade saw / resaw.
Cutting height 125 mm . Width passage 750 mm.
Cutting width with current bush 400 mm.
Stepless hydraulic feed from 0 - 75 m /min.
2d2o07mb
Roller lifting by hand wheel. Drive motor 22 KW directly mounted.
Safety device. Noise protection. Electric control cabinet with control. Double non-return safety device.
Ideal for squared timber and lath cutting.
Out of service for 15 years. Newly stored. Test run possible.
Linck VS37 Sideboardsaw
4 x 37 kW Sawmotors rebuilt.
elektric setworks for width and height.
Bt0jrfeh0m
pictures are not the actual machine
Complete resawing line.
Separator, crosscut saw, automatic infeed, splinter separator, sorting boxes.
Jwtcqu
4 movable blades
cutting height up to 150mm
2.5 - 6 m Cutting length
- 120 - 450 mm max. cutting height
- 80 -250 mm cutting width
- infeed table with centering rollers
- infeed table with log turning device
- saw with 6 - fold width adjustment
- draw-out bridge with 2 driven draw-out rollers
- Pull-out bridge with 5 pairs of pressure rollers
- 650 mm saw blade diameter
Btrdzqheqy
- 2 x 37 KW saw motors below
- 2 x 30 KW saw motors above
- 6 saw cuts
- 4 KW SEW feed gear motor
- 5- 30 m/min stepless feed speed
Multiple Circular Saw with 3 movable sawblades.
Max depth of cut : 265 mm
Max. width of timber : 700 mm
Max. distance between saws : 450 mm
Min. distance between saws : 32 mm
feeding speed up to 75 m/min
Ox8rj
Crosscut saw, used - fully functional.
Manufacturer: Paul - model Reinhardt under table crosscut saw
year of construction: 01/1963
type: RK 100 - 1532
cutting height: 100 mm
cutting width: 450 mm
Btw7yxo7uz
roller table left: 500 cm
roller table right: 300 cm
HM - circular saw 400 mm diameter + spare saw blade
Mebor PLUS band saws bring more production and speed, as well as versatility. The HTZ 1200 PLUS is performing with unmatched productivity in the price range. It is relied on by sawmills on all continents, from soft wood sawmills to quality oriented hardwood sawmills.
Elkgvcoxi
Knife holder for grinding knives for Söderhamn Eriksson spiral discs. Call or write to request more information about knife holder.
C2223fbi
Log feeder
Artiglio STH140
year: 1995
Clamping wagon Artiglio CI700 with 5 hydr. clamping jacks and 4 log turners
roller conveyor
Saw blades
Bsy2lj2w2o
cutting thickness adjustment for reversal of re-saw/center-cut, wheel-Ø 1.250 mm, wheel width 148 mm, max. saw blade width 160 mm, saw motor capacity 22 kW/ 380 V, cutting height max. 550 mm, opening width for center-cut max. 350 mm, feed drive stepless variable 6 - 45 m/min, weight 4.500 kg, hydraulic pressure for the feed roller
Lhwsz
Heavy splitting wedge hydraulic in use from 2004 to 2012.
Hydraulic drive of chain bed and extraction rollers.
Hydraulically swinging out extension rollers with pressure.
Guide blades in beak design. Divided guide knives.
De7h2yrt
Distributor for central lubrication.
Knife opening max. 600 mm. Min. 78 mm.
Direct mounting to WD creel GDZG also possible.
Resawing machine
Make MEM-TYP Cobra 3 MT 2 + 1,
year 1989,
3 stems variable, cutting height 160 mm,
M8ytynkx
drive 110 kW
double shaft, cutting height 180 mm drive 2x50 kW
cut-off saw
incl. mechanization
passage 700 mm
Motor 45 kW
Clamping trolley
Auxiliary carriage
Bsorx88r7p
Splitting wedge
Knife holder for grinding knives for HewSaw reducer heads
O9nvf
CATALOG NUMBER 6072
TECHNICAL DATA
- max log diameter 350mm
- min. log length 800mm
- max log length 9000mm
- min. thickness of the sawn board 200mm
- max horizontal clearance of 600mm
- max vertical clearance 350mm
- saw dimensions thickness / width / total length 1.5 / 75 / 815mm
- max number of saws 10 (4 pieces are assumed)
- 2 metal pulling rollers in advance
- 2 metal pulling rollers at the bottom
- height of the lower rolls 900mm
- rollers width 400mm
- hydraulic pressure control
- smoot...
The machine is in EXCELLENCE, FULLY FUNCTIONAL and NEW
Complete circular saw for log cutting
Diameter max .: 1000 mm
Lengths max .: 6000 mm
Ifbu2bh8g
Track: 8m + 8m
Motors: 2x 22 kW
Tools max .: 550 mm
main motor 7,5 kw SIEMENS
length of CHASSIS 6000 mm
diameter of the log to be worked aprox 700/750 mm
Hjmqw3deg
substructure extension to any length
AKE Heavy duty vertical resaw
Year of manufacture 2005
Flywheel 1470mm
blade width 130/150mm
Main motor 55 kW
Waco central cutting device
80m/min
dimensions:
Bsqwbcltst
L=2,5m
H=5m
W=1,5m
5.000 kg
Automatic band saw for model cuts
Models with two different sides/curvatures possible
Hydr. feed automatic
Nddu2
Cutting material clamping; stop etc.
Diameter: 1200 mm
C3wwf9mc
Width: 5 mm
We have different size sawing blades.
PAUL automatic edger line, type AB920 + BK1000
Consisting of:
- Mayrhofer infeed system
Bkyqwlh
- Mayrhofer integrated cross cutting system
- Paul measuring and infeed system, type AB920
- Paul edger machine, type BK1000
4 moveable + 1 fix saw sleeves, motor 75 kW
- Paul offcut separator system
- Outfeed system
Manufacture year Mayrhofer infeed is 2019
Manufacture year Paul edger line is 2010
Good condition 6-axis LINCK CSMK resaw. Machine complete with boards seperator with moveable chain. Cutting hight 285 mm. 4 x 85 kW
Bropxbmrww
Circular saw for front end / circular saw for cutting off of the company Stein in Unna
Brollsgiyc
Was attached to a horizontal block band saw Hb12/16
With 2 saw aggregates a 5,5 KW
Electrical lateral adjustment
Complete with saw blades, switch cabinet, control panel and wiring
Full creel Esterer LD65
with hydraulic feed
with hydraulic roller lifting
with complete hanging
with templates
with approx. 70 saw blades (partly completely new)
450mm stroke
good condition
already dismantled
only available until end of March 2021
Location: Austria, near Ried im Innkreis
Please also visit my other advertisements.
C7uzgujh
I look forward to your inquiry.
Electric motor: 55 kW
Speed: 60 m/min
Disc diameter: 1460 mm
Bt70e2ofei
Chipper canter Kockums 245A is in working condition.
A.COSTA double spindle multi-rip saw, type Jaguar/2/100
Manufacture year 1995
Machine specifications
- Max. cutting width 350 mm
- Width of feeding chain 370 mm
- Max. cutting height 200 mm
- Max. saw blade 320 mm
- Saw motor 2 x 100 Hp each
- Electric setup for cutting height and saw spindles
- Mechanical readout for positioning saw spindles
- Adjustable feed speed
- Feeding chain in good condition
Io3icifn0
Wheels diameter 1.250mm, carriage 6m long
Nlg8v
AUT LUBRICATION OF SAW BLADE
MACHINE IS RECONDITIONED TOTALLY
5 SAWBLADES
Bmf97oyc00
MACHINE DISASSEMBLED READY TO LOAD
Double edger Esterer DKN
Btioxwya
right-hand machine 0-line left
max. cutting height 120 mm
with lath head
with splinter separator 2-laminate
with under table crosscut saw Esterer type HKSU 800
with length sorting approx. 26 meters
15 kW motor
Visit also my other advertisements.
I look forward to your inquiry.
- 260 mm cutting height
- 750 mm cutting width
- 5-30 m/min stepless feed
- 2x55 sawing motors
- 3 KW feed gearbox
- 70 mm soindle diameter
Sjlwd7m
- 400 mm sawblade diameter
- 5000 Kg weight
Electric motor: 90 kW
C2zgbsm9
Weight: 2800 kg
Speed: up to 52 m/min
Max. opening: 400 mm
Min. opening: 0 mm
Chipper canter Söderhamn Eriksson, with new three spiral valve discs.
Brenta resaw machine type DDP 150
Machine specifications:
- With automatic centering unit
- Flywheels 1500 mm
- Hydraulic feeding
Ptwjaq
Wheels 1.25m diameter wheels are new regrind
Z09dgme2
B-Z cutting trolley, with h steel truss (500x300)
Bficeecabf
Length 2 x 66m
Canter worked in our sawmill, but after the modernization of the line we will not use it. We offer the possibility of overhauling the machine
Power of main engines: 2 x 75 kW (BBC engine)
Outfeed rollers: 2 x 3, engine power 2 x 2.2 kW
Milling heads: Lindex (2008)
Maximum speed: 100 m / min
Minimum prism: 75 mm
Maximum log diameter: 400 mm
Eyjvqf8dk
Minimum log length: 2 m
Output wood chip type: paper industry
Year of production: 1974
The machine does not contain an electrical switchboard
Electric motor: 2 x 75 kW
I9fkral
Max. log diameter: 650 mm
Max. cutting height: 150 mm
Weight: 9500 kg
Speed: up to 57 m/min
Max. distance between discs: 525 mm
Min. distance between discs: 65 mm
Chipper canter is in working condition.
BRENTA resaw, type DK 150
Machine specifications:
- Flywheel diameter 1500
- Flywheel width 185 mm
- For saw blades
- Heavy duty feeding by 2 vertical rollers
Iq7tw8cz
- Motor power 75 kW
- With control unit and accessories
WIDE BANDSAWS BALDES IN COIL
Q3fetiyxk
Good basic machine, but needs slight overhouling and 30 kW main motor
has to de installed. Motor is included to this price.
Bicnegukby
Most suitable place is just behind Kockums 240 - 12 canter as splitting saw.
Generally overpainting gives final outlook.
hydraulic feed gear, splitting wedge and non-driven roller conveyor, Zeles saw suspension;
drive motor 37 KW new 2018
Bv23v8oy
Length: 6,6 m
Width: 1500 mm
Roller conveyor width: 800 mm
Cross conveyor width: 2400 mm
Gpmvj2do8
Saws: 2
Board output saw line in very good condition. Board elevator with end cut saws.
Layout in the attached file.
VOLLMER double edging circular saw, type E/III/III
(for vertical log band saw)
Bhjwnxqxat
- 2 pc. saw motors, each 11 kW
- electric adjustment
Trimmer saw for a sorting plant or as a crosscut saw with 16 saws a 4 kw
0 - Saw adjustable approx. 300 mm
1,8/2,1/2,4/2,7/3,0/3,3/3,6/3,9/4,2/4,5/4,8/5,1/5,4/5,7/6,0 m
up to 100 cycles/min
with electrical cabinet
Saw diameter 500 mm
Cutting height up to 120 mm
Bk0k79eklk
dismantled and immediately available
Horizontal creel Schulte GG10 with hydraulic clamping carriage
Passage 1 m
Bkxapsezoe
5 Clamp
2 liftable block aligners
1 hydraulic feed
1 set of rails on T-beams
On request general overhaul
Vertical and horizontal sawmill WALTER TTPP 450-700
- Polish production
- year of production 2010
TECHNICAL SPECIFICATIONS:
max. log diameter 1000 mm
min. log length 2000 mm
Brv9fhcvse
max. log length 11000 mm
max. dimensions of the cut material 200 mm x 200 mm
diameter of circular saws 550 mm
power of the main engines 2 x 15 kW
power of the feed motor 1.1 kW
feed speed 0 - 30 mm
hydraulic pressure of the logs
hydraulic log leveling
transport dimensions (length / width / height) 1350 x...
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Photo gallery: the 10 strongest forklift trucks in the world
Sample sales contract for used machines in nine languages
Sell now on Machineseeker! Over 220,000 inquiries per month
10 valuable tricks for buying used machines online
Photo gallery: The World's 10 biggest excavators
