Used Frame Saw for sale (14,160)

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance Nodpjxz Dqmjfx Aa Ejwr • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3600x800x1900 mm Weight 2400 kg Total power requirement 16 kw Nwsdpfovz E Nuex Aa Esr

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Nedpeg U Uv Rsfx Aa Ejwr Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Year of construction: 1980, condition: used, passage width 560 mm passage height 560 mm stroke 600 mm Speed max. 320 1/ min. The creel is completely mechanized with new Moehringer high speed infeed. Nodpfx Aecvhndja Ejwr

Condition: excellent (used), 1 saw frame in very good condition 710 mm frame width with 8 guide shoes in good condition Njdpfslni Uqsx Aa Eewr

Condition: excellent (used), functionality: fully functional, 2 pieces of gate uprights, heavy-duty design, for Esterer Gatter HDE or SS 71, with cover. Nodpfsxw Uf Tsx Aa Eewr

Year of construction: 1999, condition: excellent (used), 1. Linck FWK Quick Clamp Carriage Gauge: 900 mm Travel speed forward/reverse: 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m Log diameter: 150–700 mm 2. Linck CV1/SE 600 Full Frame Saw with Variable Width Adjustment Passage width: 760 mm Passage height: 710 mm Saw stroke: 600 mm Nwodpfxjxtwv Te Aa Eer 3. Removal Device Bm 1/Mbh 4. Side Material Cross-Cut Saw Linck KA 1/ACF Year of manufacture: 1998. Commissioned: 2000 Various tools Sale by customer order.

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, machine/vehicle number: 700002/044, Wurster & Dietz gang saw system type GDZ GE S, year 1975, M.-Nr. 700002/044 Splitting wedge, W&D hydraulic clamping carriage with auxiliary carriage and rail Round log infeed with singulator, log carriage with log ejector Nwodpfxoxvq T De Aa Esr Gang saw roller conveyor with lifter/extractor Approx. 40 conveyor rollers, each approx. 1.60 m wide, not driven Shaker chute for gang saw waste onto the conveyor belt Electrical control cabinets, control boxes, and operator panel With spare parts inventory and Vollmer gang saw blade sharpening machine

Condition: new, Year of construction: 2025, For sawing tubes and solid materials made of stainless and tool steelTwo band speeds by means of pole-changing motorRobust gear with hardened and ground shaftPrecise and robust band guides with adjustable carbide platesLonger service life of the saw band due to saw arm inclination of 25°Efficient coolant application to the saw band guidesElectromechanical monitoring of the saw band tension, In case of deviations, a microswitch switches off the machine chip clearing brush for optimum cleaning and maintenance of the saw band function of the semi-automatic machine:Automatic workpiece clamping after the start of the cutting cycleExecution of the saw cut at the selected band speedAutonomous stop of the lowering movement and of the saw band in the lower end positionAutonomous return movement of the saw arm to its upper end positionOperator only has to move the material automaticallyEquipment:Two band speedsCut-off buttonCoolant systemChips clearance brushSaw band tension monitoringSwivelling control panelLength approx.1860 mmWidth/Depth approx.1045 mmHeight approx.1750 mmWeight approx.405 kgPower consumptionPower consumption1.5 kWElectrical dataConnection voltage400 VMachine dataSaw blade speed(s)20 - 100 m/minSpeed steplessSaw blade length2720 mmSaw blade width27 mmSaw blade thickness0,9 mmSaw blade 60 - -45 °Cutting ranges0° round (tube) Njdpfxed Hx Uqe Aa Eewr

Condition: used, Horizontal Mitre Band Saw in Swivel Bow Design JAESPA Type W 320 G Serial No. 18793 / 99 Year of Manufacture: 1999 Cutting Capacity at 90° (Round): Ø 320 mm Cutting Capacity at 90° (Square): 320 x 320 mm Cutting Capacity at 90° (Flat): 460 x 200 mm Cutting Capacity at 45° (Round): Ø 290 mm Cutting Capacity at 45° (Flat): 290 x 220 mm Cutting Capacity at 45° (Square): 240 x 240 mm Cutting Capacity at 30° (Round): Ø 200 mm Cutting Capacity at 30° (Square): 200 x 200 mm Cutting Capacity at 30° (Flat): 220 x 200 mm Saw Blade Dimensions: 4120 x 27 x 0.9 mm Blade Speed: approx. 50 m/min Material Feed Height: approx. 630 mm Saw Motor Power: 1.5 kW Connection: 400 Volt, 50 Hz - Quick mitre adjustment via pivoting saw bow with rotary table and clamping - Infinitely variable mitre cuts from 30° - 90° - Hydraulic saw bow movement with rapid approach and return stroke after cutting - Material height detection via limit switch Nwodewwaz Aspfx Aa Eor - Quick-adjust vice with eccentric clamping - Coolant system integrated in machine base - Emergency stop mushroom push button Required space (L x W x H): 2000 x 1150 x 1800 mm Weight: 975 kg

Condition: used, Year of construction: 1987, No. 3186 Frame saw / gang saw MÜLLER VGU / 4/71 Used, year of construction 1987 Passage 710 mm Drive motor 75 kW Hydraulic belt tensioning Manual width adjustment Including hydraulic clamping carriage, riving knife, gauges for width adjustment, electrical control cabinet, various saw blades Sale on behalf of customer, ex location near 47051 Duisburg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Nwodpfx Aasvcqane Esr Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Nodpfexw Ubnex Aa Eswr

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission With saw blades With hydraulic saw tensioner With suspension system Nwsdpfow Dn S Ajx Aa Esr With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2008 / 576, cutting height (max.): 250 mm, cutting width (max.): 150 mm, saw drive: 15,000 W, power: 15 kW (20.39 HP), warranty duration: 6 months, NEVA warranty includes plug & play equipment: - material guiding per choice: channels, center guide, side guide - 2 frames, 2 sets of saw blades and 2 sets of spacers - assembly frame and accessories - torque wrench, set of tools, etc. - complete revison of machine before leaves our factory The ORBIT Plus Thin Cutting Frame Saw was developed for cutting solid wood blocks into gluable slats with a minimum of saw kerf waste. Thin Cutting Frame Saw ORBIT utilizes a unique up/down method of movement for cutting veneer slats. Unlike conventional frame saws that move up and down in a lineal motion, the ORBIT Thin Cutting Frame Saw uses a patented swing-out motion at the bottom of the saw stroke. Applications of use: Parquet and engineered flooring, doors, windows, stairs, furniture, musical instruments, pencils, sport equipment (ski, snowboards, hokey sticks), wooden-covers for fruit and vegetables, etc. This unique movement of Thin Cutting Frame Saw ORBIT has several distinct advantages over the frame movements on older, conventional frame saws. With a conventional frame saw, a great deal of heat is generated by sawdust that is captured/packed into and around the saw blade teeth. This occurs because the sawdust and wood chips are unable to clear out from the blade during the upstroke. This fact is especially true when cutting high, as some of the teeth in the center of the saw blades never clear out of the cut. Because the ORBIT saw frame moves out of the cut during the upstroke, wood chips and sawdust fall clear from the saw blades. The result is less heat build up on the saw blade, longer saw blade life, dust free slats, the ability to use a thinner kerf saw blade and first of all increased production capacity of the ORBIT frame saw. Nedjxtm Raepfx Aa Eewr

Condition: new, Year of construction: 2026, functionality: fully functional, on stock! The GAP 100 automatic profile sharpening machine sharpens your gang saws and features a compact, extremely stable design, high functionality and excellent value for money. Highlights Hydro pneumatic return stroke of saw carriage Pneumatic saw blade clamping Nodeg Uzl Espfx Aa Eswr Precision linear guide for saw carriage Precision spindle height adjustment for saw blade width Fully enclosed protection hood with powerful water-cooling Feed speed regulator with frequency converter Grinding wheel dressing device Dust mist exhaust Lever control for 3 different tooth shapes Continuous tooth pitch adjustment Speed regulator for grinding wheel Optical signaling device for process status recognition (3-color signal lamp)

Year of construction: 2004, condition: ready for operation (used), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800rpm. On-site inspection is possible. Njdpfx Aajwu Ez Ns Eowr

Year of construction: 1982, condition: ready for operation (used), We offer you frame saws: 1. Bogli 71 Frame Saw with Infeed and Auxiliary Trolley and Distribution Device after the Sawmill Sawmill Type: Bogli Marathon 71 - Frame: 710 mm, hydraulic sawmill - Hydraulic adjustment of saws, raising and lowering of roller - 55 kW motor - Carriage with auxiliary trolley, track gauge 90 cm - Distribution unit after the sawmill Everything as shown in pictures no. 1, 2, 3, 4 Price negotiable 2. Linck E 28-28 Frame Saw - Frame stroke: 600 mm Everything as shown in pictures no. 5, 6, 7, 8 Price negotiable 3. Linck Frame Saw with Loading Trolley and Distribution Device after the Sawmill Trak Linck 71 - Frame width: 710 mm Nwedpjn I Udxsfx Aa Eer - Feed: 12 m/min - Fully hydraulic: hydraulic adjustment of saws, lowering and raising of the roller - Linck hydraulic loading trolley with additional device - Distribution device after the sawmill (bag, wedge) Everything as shown in pictures no. 9, 10, 11, 12, 13 Price negotiable

Year of construction: 2022, operating hours: 500 h, condition: like new (used), functionality: fully functional, Vertical frame saw PRP-58W PRP-58W saws logs of any length and diameter up to 430 mm. The horizontal frame clearance of 580 mm allows you to cut even very thick logs in the case of previous, single or double-sided cutting on a band saw. The saw uses many technical innovations, including: dynamic tensioning of the blades, a special openwork design of the saws, a device for inserting short logs (meters), and a set for their quick feeding. The design of the feeder trolleys has also been completely changed compared to traditional ones. They can be used with minimal changeover for both long and short wood. In addition to the function of a traditional sawmill, the PRP-58W successfully perform the role of a multi-rip saw, a circular sawmill for a "pallet saw", and in all applications it is characterized by a very small kerf. Nwedow H Nyyjpfx Aa Eor Technical data of PRP-58 W Horizontal clearance of the saw frame 580 mm Vertical clearance between rollers 430 mm Saw frame stroke 300 mm Main shaft speed 330 rpm Working feed 0.5 - 2.5 m/min Blade dimensions 915 x 70 x 2,0 mm Maximum number of saws 10 pcs. Main motor 18,5 kW/400 V Feed motor 0,75kW/400V Hydraulic Pump Motor 0,75kW/400V Minimum length of the sawn logs 1,8m Minimum wiping length with special equipment 1.2 m Minimum thickness of the sawing (board) 13 mm Log sawing height over ground 880 mm Track height above ground 600 mm Overall dimensions of the saw 1.20 x 1.70 x H 2.20 m Total length of the assembly with the track 10.00 m Weight with standard equipment 3600 kg Including full equipment, both wagons for round timber and roller conveyors for blocks. Grinder many carbide tipped sawblades 12 m infeed and 12 m outfeed. (Possible to easily be shortened) Located in Southern Sweden. Please call directly to Fredrik Andersson +46707175853

Condition: used, Gatter Saw Sharpening Machine Vollmer CNHV Year of manufacture: 1978 Gatter saw blade width: 60-160 mm Toothing length: max. 1450 mm Tooth pitch: 14 – 40 mm Tooth height: max. 25 mm Rake angle: 0° - 30° Blade thickness: 0 – 6 mm Grinding wheel: diameter 200 mm Working speed: 30, 50, 75 teeth per minute Nsdpfjxvz R Hsx Aa Eowr Tooth forms: 3 pcs Connected load: 2.1 kW Weight: 500 kg Including gatter saw set device Lorroch SGB 6 (similar to Meinert PH6D) year 1983

Condition: good (used), WD creel type GXW 71, with spherical roller bearing in the main shaft. Suitable for all base plates of GXV and GXW creels. Fully hydraulic. With hydraulic saw tensioner. Nwodpfxsuql Ilj Aa Ejr Ideal as a replacement sash gang or swing replacement.

Condition: new, Year of construction: 2001, functionality: fully functional, total height: 750 mm, total length: 500 mm, total width: 450 mm, Machine base for FEMI band saws Height 75cm Nodpfjvzakaox Aa Eewr Width 45cm Length 50cm available in multiple versions

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, DROZDOWSKI PRP 58 FRAME SAW complete with accessories: - Chain cross conveyor - Chain longitudinal conveyor - Hydraulic system - Roller outfeed table - Saw blade sharpener - Set saw set tool Machine underwent a complete overhaul at the manufacturer's facility – perfect condition. Technical Specifications: Horizontal frame clearance: 580 mm Vertical clearance between rollers: 350 mm Saw frame stroke: 300 mm Main shaft speed: 330 rpm Feed rate: 0.5 - 2.5 m/min Blade dimensions (L x W x thickness): 815 x 70 x 1.6 mm Njdjxawddspfx Aa Eswr Maximum number of blades: 12 pcs Main motor: 15.0 kW / 400 V Feed motor: 0.75 kW / 400 V Hydraulic pump motor: 0.75 kW / 400 V Lubrication pump motor: 0.18 kW Minimum length of log to be sawn: 1.8 m Minimum board thickness (standard): 13 mm (9 mm with single blade setup) Log cutting height above ground: 880 mm Track height above ground: 600 mm Roller pressure: hydraulic Overall dimensions of saw: 1.20 x 1.70 x 2.10 m (H) Total length of line with track: 10.00 m Weight with standard equipment: 3500 kg

Condition: used, Frame saw Pini & Kay FN65 HH Passage width: 650 mm Drive motor: 33 kW with saw blades with suspension with intermediate shaft Nodsxvz Hzepfx Aa Ejwr with splitter wedge Immediately available Location: Austria, near Graz

Condition: used, Splitter wedge for frame saw Rollers electrically driven Nedpfxexd Ub Uo Aa Eowr Available mid-October Location: Austria, near Leoben

Condition: used, Bögli KHV-700 Marathon gang saw with riving knife Nwodohvmn Aepfx Aa Eor ran without problems until removal Location: Upper Austria